Virtualization :: Cannot Ping Ubunto Guest In Vmware Player
Apr 29, 2014
In Windows 8.1 Pro as host, with vmware player 6.02, Ubuntu 12 or 14, server or desktop guest:
Network adapter set to Bridge.The guest OS installs just fine. Guest gets an IPv4 address from DHCP server on the same subnet as the host. Guest can connect to the Internet for downloads. Host connects to the Internet. Yet a ping from host to guest or guest to host results in destination unreachable. Occurs even if NIS "smart firewall" is turned off.
I've used essentially the same setup with a Win7 host with no issues. Any clues why the two won't talk to one another?
[fwiw, I bounced off Hyper-V when I saw how sluggish it was compared to vmware player.
This enhancement applies to VMware Player standalone. If you have VMware Workstation installed, you don't need to apply this as Workstation includes all the features (and also includes VMware Player).
As the most VMware Workstation users know, there is a virtual network editor available that lets you configure the virtual networks, add new networks and delete networks for the virtual machines and also bridged networks with the host computer.
Edit:
One of the usage of the network editor is fixing the bridged network connection: How to fix bridged networking in VMware player - YouTube
The editor is useful (mostly for advanced users...but you'll never now when it might be needed) to add, delete and configure the default virtual networks that come pre-installed with Player.
VMware Player is Workstation's little brother, it's free and comes with less features. There is no Network editor with VMware Player (...or is it?)
The network editor is available in the VMware Player installer but it's default set NOT to install with the rest of the features (don't know why).
It seems different fixes need to be applied to each of Player's version 4, 5 or 6.
If using version 4 of the Player, this also applies to version 3.
I'm gonna show you how to add the network editor to VMware Player.
It's easy, or it should have been... but each version has its surprise.
Keep in mind that techniques used for one version apply for newer versions too but the files need to be extracted form other installers and other archives or additional files may be required.
Player version 3 and 4 To begin we first need to extract the VMware Player installer with some extra parameters (name-of-installer.exe /e .extract). You put the installer in a folder of your choice and create a shortcut of it as shown below (1) with the extra parameters in the target:
Then you run the shortcut that creates a folder (extract) containing all the components.
Go to folder "extract". We are interested in "network.cab": open or extract it and there you see "vmnetcfg.exe". It's the network editor.
Copy or move it in the VMware Player installation folder ("Program Files (x86)VMwareVMware Player" should be the default path).
This is shown below:
Now we are ready. The network editor is part of VMware Player just like in Workstation.
The virtual networks that appear in the notification area in Windows Vista and later can be configured or deleted:
Don't delete them if you use networking in your virtual machines. The network editor works as seen in last screenshot.
Player version 5 The fix above doesn't work in VMware Player 5: the file we need is included with Workstation. (using "/e extract" parameter for the installer still applies). Read here: VMware Communities: Whither VMware Player 5.0 VMNetCfg.exe?
Extra update: Vertigo here later on the thread: How to add the "Virtual Network Editor" to VMware Player some extra info is provided how to simplify things out: VMware Player 5 already has a vmnetui.dll included and the whole procedure posted above is not needed anymore!
Player version 6
Then, See post here. Until a command is discovered to see if Player includes the network editor again, the extraction technique of vmnetcfg.exe still is considered as 'the' fix.
if you UPGRADE to Windows 8.1 rather than clean install then the VMware adapter settings (ON THE HOST) get hosed up. Your VM's won't be able to connect to your network ( and / or the Internet too).
Either re-install the adapters manually - via the VMware program "Repair program" or uninstall VMware and install the latest version - in my case VMware workstation 10.0.1
I made another post about this in the Forum elsewhere.
I have many virtual machines in my VMWare Workstation install on Windows 7. I have now let Windows 8.1 lose on the bare metal of this machine as a dual booting system. I have enabled Hyper V on 8.1 to "play around with it and when I went to install VMWare the installer quit stating Workstation could not be installed with Hyper V installed. I don't have to know about Hyper V was just going to play around with it but VMWare will always be my main virtual platform.
I try to install Windows 8 on my existing Windows 7 installation. I want to install windows 8 on vm ware player for testing and how it works for me. So i tried to install on vmware player but I receive error some thing like 64-bit machine is need to install.
My PC is 64 bit machine and the Windows 7 as well.
I had an image of my disk and I tried to boot it up from my VM workstation but it failed. I added in the line firmware = "efi". I used to be able to boot up without a problem in VM with my disk images before I changed to a new Win 8 laptop. So I was wondering does the secure boot somehow affects it?
I've created a "Powered on machine" virtual installation of my Windows 8 on VMware VCentre Convertor to run in VMware Player, the size of the Hard drive was about 130GB, in the virtual machine I've deleted all my media files and uninstalled the large programs. The size of the C: drive is now 40GB which is more manageable for a Virtual Install which will be used to tweaking experimentation before I do it to my real Windows 8 installation.
How do I shrink the Virtual Hard drive from 130GB to say 45GB, I have installed the VM Tools and reading on the VMware website it saying you go to the VM Tools in the ghost install by right clicking it in the system tray or going to control panel on the ghost install and click on shrink. I have the icon in the system tray but the only right click options are about and there is nothing in control panel.
I have tried the "compact" option in the virtual machine settings by right click my Windows 8 virtual machine from the VMware player but it doesn't shrink the volume, it wirred away for an hour but the hard drive stayed the same size.
IF has Win 8 Pro 64bit in Wmware Player could they look to see if the shrink option is there on the Virtual install of Win 8 by right clicking VM tools in the system tray and clicking settings or options.
I have done installation of windows xp sp3 on a guest virtual machine and i have problem with networking. On my host machine (windows 8.1 ) i have 1 static ip and i can't have anotherone. So from this ip i have to share network to guest machine. The guest machine tries to get ip from dhcp but it can't. When i give it manual ip address (the ip from host computer) it works ok but i have to turn off host's network card because they cant have tha same ip address.
After I installed VMware-player and VirtualBox, I started to get this error "The connection Was Reset" (got that on firefox, different name on Chrome since it has an error code, but leads to the same error).
Weird thing is that I can still explore some of the website that are open, for instance I leave a Facebook tab or Twitter tab, or any other site (not necessarily a social network). But if try to open a "new" site, which is not explored yet, then I get the error.
Things I tried so far: 1) delete cache, doesn't work at all. 2) Change the MTU Value, that was quite interesting, since I do get an error when i try to ping with my current value, but when i find a value that apparently should work, after I set that value as my MTU, I get the error with that value, so i go down a few numbers until i get a working value, set the MTU and error again. and so on. 3) Made a repair of my windows 8 install, preserving my personal files, but didn't work. 4) Only thing that seems to work is restart my pc.
I didn't have time yet to try to reinstall my antivirus (Avast) .
As I am having problems with USB and getting my workfiles onto my guest machine I thought I could load them onto my host then access them via file sharing. I have set up the VMware player with the location of a shared directory on the host but I cannot see that on my guest XP desktop. The steps I need to do to get this working. So far I am having no end of problems getting this new laptop to work with my old software. Using Windows 8 Pro 64 bit on host and Windows XP Pro
Trivia question: max value for -w in ping command? I don't mean the max wait a ping can experience. I just mean the maximum value after -w on the command line that will not give an error. If they use a 32 bit integer then it's pretty big. But if it's only 16 bit maybe we're limited to 64k?
I am on a laptop and when I leave my laptop on for an extended period of time, the ping suddenly spikes to 300+ when I'm playing games and whatnot. Internet is completely unusable when it reaches that problem. I'm pretty sure that my laptop is the problem because whenever that happens, I just restart the adapter and it calms down and is perfectly fine again.
I can ping our work server (windows 8 server) as well as connect to it using a remote desktop connection, it just won't map as a network drive.
I had this problem a few days ago, so I tried everything I could think of (dns flush, ip config release/renew, restarting, disconnecting from network drive & re-mapping) and nothing would let me back on. I did a system restore to 2 weeks ago and it works again. So of course then windows wants to do its updates, I let the updates happen and the problem returns.
It seems like the windows updates are the root of the problem. For now I'll have to restore to before the updates & turn off the updates.
Host machine on same network LAN address 192.168.1.102 on WLAN - perfectly good connection / internet etc
Name BROWNBEAR
Windows machine to be pinged -- BLACKDOG on 192.168.1.103 but on a LAN (Ethernet)
Both PHYSICAL machines (i.e not running inside VM's)
FROM BLACKDOG no problem pinging BROWNBEAR either by Host name or IP address
BLACKDOG in the Ethernet connector seems to have a Connection specific DNS suffix WAG320N (Where that came from I haven't a clue !!) - It seems to be the HOSTNAME in the router.
BROWNBEAR pinging BLACKDOG via IP address 192.168.1.103 --works fine and shares accessible via mount via IP address.
Now when BROWNBEAR Pings BLACKDOG via Host name (BLACKDOG) it returns slowly PING BLACKDOG.WAG320N(62.169.151.91) -- haven't a clue where it got that IP from !!!.
Looks like I've got a DNS hose up somewhere
How to "Unhose" it. I don't want to refer to BLACKDOG by IP address each time since after reboots this will change (should be managed by DHCP). I haven't a clue on WHICH machine the problem is on -- BROWNBEAR is WIFI connected while BLACKDOG is on Ethernet.
Windows networking
IPCONFIG for BLACKDOG (Ethernet connected) shown
Router Ethernet settings shown (should I have a Domain !!) Always worked without one before.
Nothing would fix the problem ""Ethernet" doesn't have a valid IP configuration".
After playing a match in "League of Legends" with my desktop I noticed my ping went up and I disconnected right after, I looked at my network icon in the taskbar and saw an yellow error mark. I clicked on the network icon and it said "Unidentified Network" and "Limited". I tried to troubleshoot the problem and the problem found was: "Ethernet" doesn't have a valid IP configuration. I ran ipconfig with the cmd tool and I noticed Ipv4 Address was 169.254.171.146 (As ive heard that means windows is using a default ip by itself).
I have a lot of devices in my house like laptops and smart-phones that work perfectly good. One thing that did work was sharing 3G internet from my iPhone to my desktop via usb.
Solutions tried: Resetting router, disabled the "allow computer to turn of this device to save power" in ethernet options, tried different cables, restarting pc and updated drivers (installing the driver to a usb from my laptop).
I installed the Windows 8 Consumer Preview last december and since then, all my online games both from local and international servers have been experiencing extreme lag during gameplay and loading. This only happened after i installed the consumer preview and since then has been happening everytime i try playing any of the online games. I tried playing offline games to see if it might be the graphics but did not encounter any graphics lag and the offline games played perfectly.
I've contacted my ISP and one of their techs came over to check my connection and found nothing wrong with it or from the connection from their servers. Even streaming and downloading speeds are normal.
I've checked my connection at speedtest.net and my ping and internet connection are also registering as normal
Now i tried contacting support for 2 of the online games Starcraft 2 and Diablo 3, they requested a pathping file which i sent to them and copied below:
Tracing route to 202.9.67.254 over a maximum of 30 hops
My graphic driver is up to date and i'm running a 2GB RAM 800 mhz + 8 GB readyboost RAM
Seems my problem is loss of data packets during the exchange of data going on during online gameplay.
How to resolve this problem, considering streaming and downloading speeds are fine and only online games are affected, both the game support and isp support are blaming each other for the problem and i'm still left back in square 1 with my problem.
It pops up on the video screen I want to watch in Fox News website -- I haven't noticed it popping up on other sites as yet. It will list the site asking for permission to store information on my computer. The link I have attached below gives instructions on how to remove this pop-up. Is this flash player thing safe or is it some kind of virus or malware? The attached link refers to it as spyware. If I were to remove the Flash player program, will it affect playing games or whatever on my laptop.
recently i installed vmware because i work with it alot, after doing so and sharing 1 folder with vmware, i cant drag and drop any files anymore. it just suddenly stopped working
I maked Windows 8.0 Single Language EN-US ISOs (x86 and x64) from RU-RU ISOs (I removed Russian and added English).
When I try to install it in VMware Workstation (I tried x86, then I tried x64), on a half installation on both installations it says error: Windows could not see the offline locale information. Error code: 0x80000001.
I've had my computer for about four years with an Asus motherboard, and I recently (like two days ago) had it changed to a Digilite motherboard. I'm also a regular user of VMware or VirtualBox, whichever is feeling fancy to me.
About six months ago, my Seagate hard disk started clicking regularly at about 10 seconds interval, which quickly came down to 1-2 second interval, causing the hard drive to click furiously. Due to this, my Windows 8 would get stuck and won't even give a BSOD. Same thing would happen at restart. Automatic Repair didn't work, but chkdsk would find some corrupted sectors and fix the issue. On the next restart, after running smoothly for 5 minutes, the clicking and stucking would start again. I finally narrowed down the problem to VMware and removed it and ran chkdsk again. This seemed to solve the problem.
After getting my new motherboard, I thought the results might be different, so I installed VMware and ran it for a long time. There was no clicking of HDD until the next startup. As soon as I logged in, desktop became slow and stucky, and finally I heard the horrific sound of that clicking again. (Now whenever I hear ANYthing click ANYwhere, I freeze for a second.) I knew what the problem was and applied the same solution I applied months ago.
I need to be able to run VMware or VirtualBox to go through a few Linux and python books I'm reading. My brain just cannot grasp how a software could affect the hardware this badly! I'll try a few other things to narrow down the problem while I wait for responses. At this point, where changing the HDD seems to be the only option
I enabled the guest account on my laptop to let my parents use it for whatever they needed without having to worry about them messing something up on my main account.
I have been trying to access my administrator account for awhile now. I've tried shutting down, restarting, etc. but as soon as the windows 8 start screen pops up, I'm immediately logged on to Guest. I can't figure out how to get to my admin account.
I have just enabled the Guest account on my laptop with the idea that it is completely secure from my account but it isn't really working for me. It seems to act as any other account and remembers details of the previous log-on.
Is there some way I can allow a Guest user to access internet, print (and nothing else really but it doesn't matter) and then after they have finished whatever they have done is destroyed so next time there is nothing in downloads, nothing on desktop, no preferences or log-ins saved in browsers etc. Like the temporary profile you get on occasion.
I had this problem before where, when a pet rabbit (I admit that was a bad decision) would walk or sit on the computer or keyboard, not for a long time, and as the result the mousepad/cursor would stop working. Even a plugged in mouse wouldn't work. I had it repaired and the person who fixed it said it was a setting. Problem is, same rabbit same problem, and now my cursor does it again. I can turn it on and it will move and click, same with my guest account, but then after a while it'll freeze and not do a thing. Where's the setting?
I've mistakenly changed my guest account to administrator and my previous administrator account to local account in Windows 8. Now I'm unable to remove the guest account as administrator or switch it off.
I have only one user account which has now become local account.
How to become administrator if your using a guest account, I lost and forgot my password in administrator and can't access to my files, my problem I need to retrieve my files, I can't download any application because they ask password administrator. What can I do? . I'm using windows 8 OS.
Apparently there is little or no security for app tiles (on right-side of the screen. Guests can run any app that was installed in the Public folder as well as many of the administrative type apps. I can go in one-by-one and deny Guest access, but I must have over 100 apps they can access and run. They can even uninstall programs.
It would nice if Windows 8 had set all tiles to deny guest permissions for all of the app tiles and let us turn the few apps we give guest "on."
Any way or a program that you could deny guests access to these app tiles in bulk?
