recently i installed vmware because i work with it alot, after doing so and sharing 1 folder with vmware, i cant drag and drop any files anymore. it just suddenly stopped working
View 3 Replies
I recently bough a ssd, and I'm having an annoying thing happen with my shortcut folders(to my other hard drive).
I've made a video below because it was easier to show than to explain.
Windows 8 Shortcuts - YouTube
How do I make it MOVE files to shortcuts instead of COPY files to short cuts
I use to have no problem with this, noticed recently I am unable to do this. I cant for the life of me figure out what happened
View 1 Replies View RelatedAfter I drag and drop image files onto dvd they will not stay on dvd after I restart pc. Dvd player is in usb mode. Once I fill up disc I will close it. What is causing this, possibly windows defender?
View 4 Replies View RelatedI have Windows 8 [haven't upgraded to Windows 8.1 yet] and the past few days I am having ALL kinds of problems.
[1] My ability to drag and drop files and folders is no longer working.
[2] Things are opening on one click, even though I disabled that feature and set it for double clicking only
[3] I can't grab and move windows that are open, it won't allow me to do that.
[4] I also just noticed that a lot of programs that have a drop box, when I click on them, it doesn't drop the box, it just blinks down and then off...so you can't select anything.
I'm not getting any error messages. I tried the two things listed as far as registry editing...but the one that shows the drag and drop isn't even in my registry editor anymore....so I can't change it from 0 to 1 -- it's no longer there.
Also I tried to follow another suggestion [thinking it might be a virus] which stated to shut down windows restore first. When I did that it deleted all previous restorations so I can't even go ahead and try to restore.
Lastly, I do have an ongoing antivirus and spyware...both of which I run on a daily basis....
I just built a new Windows 8.1 64 bit with Asrock Haswell Extreme 11 ac motherboard. Using old copy of Audition 1.5 and Newest copy of Mediamonkey 4.1. I can't drag and drop mp3's into the programs. The only way I can get them in is through File/Open. I know that the Audition is very old, but I didn't have a problem with it on XP. I thought it was only the Audition problem but now that I have the newest version of Mediamonkey on it the problem also affects this one too. Is there anything I can do. I'm sure I have administrator set as privileges.
View 3 Replies View RelatedI don't seem to be able to drag and drop anymore in more than one application, so it should be Windows, not the applications.
I did restart the laptop, but it didn't work.
I have only been using windows 8 for a few weeks and I am still getting my head round it. I have copied some documents from my old laptop onto my new one and have notice that most of the files are now all mixed up. I am trying to drag and drop them into the order in which I want them set out, for example my bank statements, utility bills etc are no longer in date order. I have tried to do it from the drop down box which says descending, ascending, date etc, but they are still all mixed up. Is there a way to drag and drop a file so that I can slot it into the place I want it to be, like you can with photos in Picasa, there doesn't seem to be a drag and drop in windows 8 (or am I missing it somewhere along the line)?
View 2 Replies View RelatedI have had this issue to some extent from Windows 7 onwards, but it has got worse with successive Windows versions, and it's now quite insane since I 'upgraded' from Windows 8 to 8.1 (x64).
The problem is that when I drag and drop from Desktop or Explorer or my regular file manager (FreeCommander), an absolutely huge icon appears at the tip of the mouse pointer, representing the file being dragged (or, in an application, representing the block of text being dragged). Not only is this extremely distracting, but it actually makes it difficult and indeed sometimes impossible to see the exact point where I mean to be dropping the item.
I so much want to turn off that behaviour. Sure, I want a small, discreet little rectangle or tiny icon to show at the mouse pointer, so that I know that I am indeed dragging something, as I used to get a long time ago, but not this great big obstructive thing that appears for each drag and drop nowadays. It may look clever or 'cool', but it is dysfunctional and obstructive.
After using Windows 8 pro for couple of days, i was on Windows 7 pro before i noticed some problems while working with my applications. For example, I'm unable to drag and drop a wav file into another application (from windows explorer to audio application), while before worked ok. Is there any option to enable or some registry trick or anything
View 6 Replies View RelatedI've had my computer for about four years with an Asus motherboard, and I recently (like two days ago) had it changed to a Digilite motherboard. I'm also a regular user of VMware or VirtualBox, whichever is feeling fancy to me.
About six months ago, my Seagate hard disk started clicking regularly at about 10 seconds interval, which quickly came down to 1-2 second interval, causing the hard drive to click furiously. Due to this, my Windows 8 would get stuck and won't even give a BSOD. Same thing would happen at restart. Automatic Repair didn't work, but chkdsk would find some corrupted sectors and fix the issue. On the next restart, after running smoothly for 5 minutes, the clicking and stucking would start again. I finally narrowed down the problem to VMware and removed it and ran chkdsk again. This seemed to solve the problem.
After getting my new motherboard, I thought the results might be different, so I installed VMware and ran it for a long time. There was no clicking of HDD until the next startup. As soon as I logged in, desktop became slow and stucky, and finally I heard the horrific sound of that clicking again. (Now whenever I hear ANYthing click ANYwhere, I freeze for a second.) I knew what the problem was and applied the same solution I applied months ago.
I need to be able to run VMware or VirtualBox to go through a few Linux and python books I'm reading. My brain just cannot grasp how a software could affect the hardware this badly! I'll try a few other things to narrow down the problem while I wait for responses. At this point, where changing the HDD seems to be the only option
After I installed VMware-player and VirtualBox, I started to get this error "The connection Was Reset" (got that on firefox, different name on Chrome since it has an error code, but leads to the same error).
Weird thing is that I can still explore some of the website that are open, for instance I leave a Facebook tab or Twitter tab, or any other site (not necessarily a social network). But if try to open a "new" site, which is not explored yet, then I get the error.
Things I tried so far:
1) delete cache, doesn't work at all.
2) Change the MTU Value, that was quite interesting, since I do get an error when i try to ping with my current value, but when i find a value that apparently should work, after I set that value as my MTU, I get the error with that value, so i go down a few numbers until i get a working value, set the MTU and error again. and so on.
3) Made a repair of my windows 8 install, preserving my personal files, but didn't work.
4) Only thing that seems to work is restart my pc.
I didn't have time yet to try to reinstall my antivirus (Avast) .
I've been having this issue and trying to wrap my head around it for a couple weeks, and I've had this new laptop less than a month. Just as I was posting this, I realized that it seems to be specifically 64-bit programs.
Specifically, the problem is that when I try to drag a file from Explorer into a program that I know is able to load it from drag-and-drop, all I get is the "no" pointer, the circle with the line. All the programs I've tested would let you drag files onto them just fine on my older Windows 7 laptop.
Some of the specific programs this is happening in:
Microsoft Office 2010 (seemingly the whole suite is acting like this, I tested Word and Powerpoint)
Paint.NET 3.5.10
Sony Vegas 12.0
Waterfox 18.0.1
I can File>Open files in these programs just fine, but dragging to them from Explorer would be miles more convenient. I've tested the files I've tried dragging. They drag fine into Notepad, they drag fine into Foobar2000, IrfanView, Notepad++, all operating as 32-bit.
Now I WAS having the same problem with Audacity and Skype, which is why I didn't catch the pattern of them all being x64 programs at first (since I have 32-bit versions of both), but that was happening because they were being run as Administrator, which is an issue I'd also like to try and resolve. I don't understand why running as Admin should prevent me from dragging files into open windows of them.
I updated to windows 8.1 yesterday and now I can't drag anything. I have tried everything I think, but it won't drag..Restore would probably work but I don't want to that.
View 9 Replies View Relatedin windows 7 when we click on start menu and serach a program , we can drag that into desktop or other ways.
but in charm bar in win 8 how can we do that after searching?
I am trying to organize the files on my system, and am consistently butting heads against this problem. It always seems to be the last file I highlight. In other words.. I have two directories open on the screen, and am simply looking to drag files/folders from one directory to another. To do this, you almost always have to highlight the folder you want to move, and doing this seems to put a lock on that folder. If I highlight more folders, it seems to be ok, except for the last one I highlight will always fail to copy.
Any way to prevent windows from locking files in this way?
Recently I refreshed my laptop to make it faster(and to remove the viruses/spyware). Before I refreshed it, it has Sony exclusive programs like the VAIO smart network etc. I backup it both manually and with file history. I found the Sony programs and copied it to my computer. The problem is, how do you install it again? I cant find it in the search tab nor I dont know of I can still open it but I know that it is in fact complete. How do you think I should install it and as much as possible I dont want to use the file history method!
View 3 Replies View RelatedBasically at the moment i am using Windows 7 Home and will be upgrading to Windows 8.1 in about a weeks time. I currently have Windows 7 installed on a 60Gb SSD and i have a secondary 500Gb Seagate Barracuda for other files. What i am wondering is if i clean install Windows 8 onto the SSD only will i still be able to use the 2nd drive in Windows 8? Basically this drive has a fair amount of music / videos etc and i would like to make to make sure i can use these. I would like to do a clean install and not an upgrade btw.
View 3 Replies View RelatedWin App store not installing app, SFC scan details attached. Some files were corrupt... ow to replace/repair them.....
View 9 Replies View Relatedif you UPGRADE to Windows 8.1 rather than clean install then the VMware adapter settings (ON THE HOST) get hosed up. Your VM's won't be able to connect to your network ( and / or the Internet too).
Either re-install the adapters manually - via the VMware program "Repair program" or uninstall VMware and install the latest version - in my case VMware workstation 10.0.1
I made another post about this in the Forum elsewhere.
I try to install Windows 8 on my existing Windows 7 installation. I want to install windows 8 on vm ware player for testing and how it works for me. So i tried to install on vmware player but I receive error some thing like 64-bit machine is need to install.
My PC is 64 bit machine and the Windows 7 as well.
I have many virtual machines in my VMWare Workstation install on Windows 7. I have now let Windows 8.1 lose on the bare metal of this machine as a dual booting system. I have enabled Hyper V on 8.1 to "play around with it and when I went to install VMWare the installer quit stating Workstation could not be installed with Hyper V installed. I don't have to know about Hyper V was just going to play around with it but VMWare will always be my main virtual platform.
View 9 Replies View RelatedI was able to boot into WinPe, but when applying image I cant select a applydir option, for obvious reasons.
View 7 Replies View RelatedI maked Windows 8.0 Single Language EN-US ISOs (x86 and x64) from RU-RU ISOs (I removed Russian and added English).
When I try to install it in VMware Workstation (I tried x86, then I tried x64), on a half installation on both installations it says error: Windows could not see the offline locale information. Error code: 0x80000001.
I not maked any mistakes while making ISOs.
I had an image of my disk and I tried to boot it up from my VM workstation but it failed. I added in the line firmware = "efi". I used to be able to boot up without a problem in VM with my disk images before I changed to a new Win 8 laptop. So I was wondering does the secure boot somehow affects it?
View 7 Replies View RelatedThis enhancement applies to VMware Player standalone. If you have VMware Workstation installed, you don't need to apply this as Workstation includes all the features (and also includes VMware Player).
As the most VMware Workstation users know, there is a virtual network editor available that lets you configure the virtual networks, add new networks and delete networks for the virtual machines and also bridged networks with the host computer.
Edit:
One of the usage of the network editor is fixing the bridged network connection: How to fix bridged networking in VMware player - YouTube
The editor is useful (mostly for advanced users...but you'll never now when it might be needed) to add, delete and configure the default virtual networks that come pre-installed with Player.
VMware Player is Workstation's little brother, it's free and comes with less features. There is no Network editor with VMware Player (...or is it?)
The network editor is available in the VMware Player installer but it's default set NOT to install with the rest of the features (don't know why).
It seems different fixes need to be applied to each of Player's version 4, 5 or 6.
If using version 4 of the Player, this also applies to version 3.
I'm gonna show you how to add the network editor to VMware Player.
It's easy, or it should have been... but each version has its surprise.
Keep in mind that techniques used for one version apply for newer versions too but the files need to be extracted form other installers and other archives or additional files may be required.
Player version 3 and 4 To begin we first need to extract the VMware Player installer with some extra parameters (name-of-installer.exe /e .extract). You put the installer in a folder of your choice and create a shortcut of it as shown below (1) with the extra parameters in the target:
Then you run the shortcut that creates a folder (extract) containing all the components.
Go to folder "extract". We are interested in "network.cab": open or extract it and there you see "vmnetcfg.exe". It's the network editor.
Copy or move it in the VMware Player installation folder ("Program Files (x86)VMwareVMware Player" should be the default path).
This is shown below:
Now we are ready. The network editor is part of VMware Player just like in Workstation.
The virtual networks that appear in the notification area in Windows Vista and later can be configured or deleted:
Don't delete them if you use networking in your virtual machines. The network editor works as seen in last screenshot.
Player version 5 The fix above doesn't work in VMware Player 5: the file we need is included with Workstation. (using "/e extract" parameter for the installer still applies). Read here: VMware Communities: Whither VMware Player 5.0 VMNetCfg.exe?
Extra update: Vertigo here later on the thread: How to add the "Virtual Network Editor" to VMware Player some extra info is provided how to simplify things out: VMware Player 5 already has a vmnetui.dll included and the whole procedure posted above is not needed anymore!
Player version 6
Then, See post here. Until a command is discovered to see if Player includes the network editor again, the extraction technique of vmnetcfg.exe still is considered as 'the' fix.
I've created a "Powered on machine" virtual installation of my Windows 8 on VMware VCentre Convertor to run in VMware Player, the size of the Hard drive was about 130GB, in the virtual machine I've deleted all my media files and uninstalled the large programs. The size of the C: drive is now 40GB which is more manageable for a Virtual Install which will be used to tweaking experimentation before I do it to my real Windows 8 installation.
How do I shrink the Virtual Hard drive from 130GB to say 45GB, I have installed the VM Tools and reading on the VMware website it saying you go to the VM Tools in the ghost install by right clicking it in the system tray or going to control panel on the ghost install and click on shrink. I have the icon in the system tray but the only right click options are about and there is nothing in control panel.
I have tried the "compact" option in the virtual machine settings by right click my Windows 8 virtual machine from the VMware player but it doesn't shrink the volume, it wirred away for an hour but the hard drive stayed the same size.
IF has Win 8 Pro 64bit in Wmware Player could they look to see if the shrink option is there on the Virtual install of Win 8 by right clicking VM tools in the system tray and clicking settings or options.
In Windows 8.1 Pro as host, with vmware player 6.02, Ubuntu 12 or 14, server or desktop guest:
Network adapter set to Bridge.The guest OS installs just fine. Guest gets an IPv4 address from DHCP server on the same subnet as the host. Guest can connect to the Internet for downloads. Host connects to the Internet. Yet a ping from host to guest or guest to host results in destination unreachable. Occurs even if NIS "smart firewall" is turned off.
I've used essentially the same setup with a Win7 host with no issues. Any clues why the two won't talk to one another?
[fwiw, I bounced off Hyper-V when I saw how sluggish it was compared to vmware player.
When installing fedora 20 using VMware Workstation 10 with Windows 8.1 host, the message "cable unplugged" appears during installation.
Unavailability of network cable persists after completion of installation.
Problem not replicated with VirtualBox.
Old VMs also fail to access network.
I'm currently using my desktop computer as an host for about 7 VMware machines running at the same time.
I guess specs are included in the dump, but I'll put them here:
CPU: i7 2600k
SSD: samsung evo 840 120gb
RAM: 2x 4gb DDR3 1600mhz
GPU: nVidia 570 GTX
Currently under windows 8.1 final release build, with every last Windows updates available. (fresh install since yesterday)
After maybe 2 hours of somewhat intensive tasks, my computer restart itself saying : "Your PC ran into a problem" in the blue ribbon UI.
I am unable to drag a window from one monitor to the other when the cursor is at the top or bottom of the screen (both monitors are the same size and same resolution). It stops when in one of the hot corners forcing me to have to drag between the two corners. Any way to configure that?
View 2 Replies View Related
