I have a simple LAN with two PC's --a Win7 and a Windows 8.
- The Windows 8 machine can see and communicate normally with the Win7.
- The Win7 can ping the Windows 8 but can't see it.
I can ping our work server (windows 8 server) as well as connect to it using a remote desktop connection, it just won't map as a network drive.
I had this problem a few days ago, so I tried everything I could think of (dns flush, ip config release/renew, restarting, disconnecting from network drive & re-mapping) and nothing would let me back on. I did a system restore to 2 weeks ago and it works again. So of course then windows wants to do its updates, I let the updates happen and the problem returns.
It seems like the windows updates are the root of the problem. For now I'll have to restore to before the updates & turn off the updates.
Trivia question: max value for -w in ping command? I don't mean the max wait a ping can experience. I just mean the maximum value after -w on the command line that will not give an error. If they use a 32 bit integer then it's pretty big. But if it's only 16 bit maybe we're limited to 64k?
ping 127.0.0.1 -n 2 -w 50000 > nul
--------------------------^^^^
For the purpose of this trivia let's limit it to Windows 8 command line .. not Linux or OS/2 or whatever.
I am on a laptop and when I leave my laptop on for an extended period of time, the ping suddenly spikes to 300+ when I'm playing games and whatnot. Internet is completely unusable when it reaches that problem. I'm pretty sure that my laptop is the problem because whenever that happens, I just restart the adapter and it calms down and is perfectly fine again.
View 1 Replies View RelatedHost machine on same network LAN address 192.168.1.102 on WLAN - perfectly good connection / internet etc
Name BROWNBEAR
Windows machine to be pinged -- BLACKDOG on 192.168.1.103 but on a LAN (Ethernet)
Both PHYSICAL machines (i.e not running inside VM's)
FROM BLACKDOG no problem pinging BROWNBEAR either by Host name or IP address
BLACKDOG in the Ethernet connector seems to have a Connection specific DNS suffix WAG320N (Where that came from I haven't a clue !!) - It seems to be the HOSTNAME in the router.
BROWNBEAR pinging BLACKDOG via IP address 192.168.1.103 --works fine and shares accessible via mount via IP address.
Now when BROWNBEAR Pings BLACKDOG via Host name (BLACKDOG) it returns slowly PING BLACKDOG.WAG320N(62.169.151.91) -- haven't a clue where it got that IP from !!!.
Looks like I've got a DNS hose up somewhere
How to "Unhose" it. I don't want to refer to BLACKDOG by IP address each time since after reboots this will change (should be managed by DHCP). I haven't a clue on WHICH machine the problem is on -- BROWNBEAR is WIFI connected while BLACKDOG is on Ethernet.
Windows networking
IPCONFIG for BLACKDOG (Ethernet connected) shown
Router Ethernet settings shown (should I have a Domain !!) Always worked without one before.
Nothing would fix the problem ""Ethernet" doesn't have a valid IP configuration".
After playing a match in "League of Legends" with my desktop I noticed my ping went up and I disconnected right after, I looked at my network icon in the taskbar and saw an yellow error mark. I clicked on the network icon and it said "Unidentified Network" and "Limited". I tried to troubleshoot the problem and the problem found was: "Ethernet" doesn't have a valid IP configuration. I ran ipconfig with the cmd tool and I noticed Ipv4 Address was 169.254.171.146 (As ive heard that means windows is using a default ip by itself).
I have a lot of devices in my house like laptops and smart-phones that work perfectly good. One thing that did work was sharing 3G internet from my iPhone to my desktop via usb.
Solutions tried: Resetting router, disabled the "allow computer to turn of this device to save power" in ethernet options, tried different cables, restarting pc and updated drivers (installing the driver to a usb from my laptop).
I installed the Windows 8 Consumer Preview last december and since then, all my online games both from local and international servers have been experiencing extreme lag during gameplay and loading. This only happened after i installed the consumer preview and since then has been happening everytime i try playing any of the online games. I tried playing offline games to see if it might be the graphics but did not encounter any graphics lag and the offline games played perfectly.
I've contacted my ISP and one of their techs came over to check my connection and found nothing wrong with it or from the connection from their servers. Even streaming and downloading speeds are normal.
I've checked my connection at speedtest.net and my ping and internet connection are also registering as normal
Now i tried contacting support for 2 of the online games Starcraft 2 and Diablo 3, they requested a pathping file which i sent to them and copied below:
Tracing route to 202.9.67.254 over a maximum of 30 hops
0 Boni [192.168.1.101]
1 192.168.1.1
2 112.203.160.1.pldt.net [112.203.160.1]
3 119.93.255.233
4 210.213.131.46.static.pldt.net [210.213.131.46]
5 210.213.131.93.static.pldt.net [210.213.131.93]
[Code] ....
My graphic driver is up to date and i'm running a 2GB RAM 800 mhz + 8 GB readyboost RAM
Seems my problem is loss of data packets during the exchange of data going on during online gameplay.
How to resolve this problem, considering streaming and downloading speeds are fine and only online games are affected, both the game support and isp support are blaming each other for the problem and i'm still left back in square 1 with my problem.
I am trying to get file sharing to work with my win 8 machine and my OS X Server. The computers are on the same network with the same workgroup but I can't seem to connect. I was able to connect with the wife's win 7 home machine until I upgraded it to win 7 Ultimate now it wont connect either.
View 1 Replies View RelatedIn XP you used to be able to pull up a CMD Prompt and ask: net config server and this would tell how many machines/devices (other computers, printers NATs, NASs etc.) that you could hook to a machine.
they removed this function (as far as I can tell) in win7 but you can find references to the maximum number of devices that you can hook up (10 for Home , 20 for Pro) . How many devices that is for Windows 8?
I'm trying to map a Server 2003 network drive in Windows 8.1
For some reason, in the 'Map Network Drive' window, the server doesn't show under 'Network' when I click the 'browse' button. Additionally the server doesn't show under 'Network' in file manager but I can ping it just fine.
Is there perhaps some kind of incompatibility between Win 8.1 and Server 2003 that could be causing this ...
My old desktop (upstairs) and my laptop are both running Windows 7. I can very easily use remote desktop connection from my laptop to the upstairs computer. My new desktop (downstairs) runs Windows 8.1. I use a local login, not the Microsoft login. My user name and password are the same on all three computers, and all three are on the same home network.
When I launch remote desktop connection from the Windows 8 machine, and enter the name of the Windows 7 machine, along with my User name and password (same on all three computers), the Windows 7 screen (from the upstairs machine) appears along with "The user name or password is incorrect".
I have an orange crossover cable that I have connected to both machines and I set up sharing on both but the Windows XP machine doesn't show the 8.1 machine. I'm trying to pull some movies and music off my 8.1 laptop because I use my XP desktop as a media server of sorts.
I can't figure out how to get them to recognize each other and my connection just says "limited."
I had to buy a new laptop that I could take with me to work, and of course it runs Windows 8 (which I absolutely hate, incidentally). I decided it would be nice if I could share files with my primary computer when I'm at home, which is a desktop running dual-boot Win7 and Ubuntu.
I initially set up a homegroup, but whenever I try to access laptop files from my desktop it always pops up with a "enter network username and password" dialog. I tried looking up solutions to that but so far haven't found anything that works. I made sure the clocks on both computers were the same, and I made sure that all network settings were the same on both, including the setting "do not use user accounts/passwords," but I'm still having the issue.
So, what's the best way for me to share/sync files on my laptop with the desktop's files while I'm at home?
I have recently upgraded to Windows 8.1. After the update what i have noticed is i lost wifi connectivity in the virtual machine which running Windows 2008 R2 server. I have Windows 8.1 and VMware workstation 8.0. Windows 2008 R2 is running in the Virtual machine and i was able to connect to wifi from the virtual machine and share files netween Windows 8 and Windows 2008 R2. but now i can't connect anymore. Even when i enable WLAN service on Windows 2008 R2, i don't see the wifi adapter in network settings.
View 2 Replies View Relatedget a XP vhd up and running *except* I do not have Network or USB capabilities. Apparently I am suppose to get an option to install the drivers from the host computer (Windows 8.1); I do not see/get that option.
View 9 Replies View RelatedIn Windows 8.1 Pro as host, with vmware player 6.02, Ubuntu 12 or 14, server or desktop guest:
Network adapter set to Bridge.The guest OS installs just fine. Guest gets an IPv4 address from DHCP server on the same subnet as the host. Guest can connect to the Internet for downloads. Host connects to the Internet. Yet a ping from host to guest or guest to host results in destination unreachable. Occurs even if NIS "smart firewall" is turned off.
I've used essentially the same setup with a Win7 host with no issues. Any clues why the two won't talk to one another?
[fwiw, I bounced off Hyper-V when I saw how sluggish it was compared to vmware player.
Is there a way to setup network profiles or something so that when I bring my Surface Pro to work and connect to the wireless network there it will use the static ip address I have but when I disconnect and then connect to my home wifi it will go back to DHCP? On my MacBook Pro I can go into the network settings and change the location profile I have setup for networks but I don't see anything like this for Windows 8.
View 4 Replies View RelatedI am trying to share a specific folder on my Windows 8 computer with my Windows 7 computer. They are both on the same network connected to the same router. The Windows 8 computer is connected through ethernet, while the Windows 7 computer is connected wirelessly.
Here are my settings on my Windows 8 Computer:
This is the error I get on my Windows 7 computer:
What's up with this? On a related note, is it possible to share this folder with a specific PC, rather than "Everyone" on the network?
I am having trouble with ICS on win 8. On my old laptop (win xp) I used to be able to share my 3Connect dongle internet to connect to Xbox live. I recently got a new laptop with win 8 and whenever I share this internet connection I can never connect on my Xbox (the network to internet part fails). When everything is connected up and shared the Ethernet says 'Unidentified Network' which i believe is the cause of the problem. I've read i may require a driver update but i cannot seem to find one.
My Laptop: Toshiba Satellite C855-29N
what to do, maybe i am not setting up the connection sharing properly?
I've been trying to set up an old Savin 9033 printer through the company's router, but I couldn't find the network it's set up on from any other computer.
So I pull up Network & Sharing, see that Network Discovery is turned off.
I check it, go to click on "Save Changes" and nothing happens. I click it a few times and it kicks me back to the previous page, nothing saved. No password prompt or anything.
I double checked that all the appropriate services are running (DNS Client, SSDP Discovery, UPnP Device Host, Function Discoveryr Resource Publication, etc.) and made sure Network Discovery was allowed through Windows Firewall.
This morning I installed an optional update from Windows Update. It was Ralink Technology WLAN 802.11 wireless LAN card.
Since then, when I try to print to my wireless network printer, the network would disconnect then come back on after a while. The update shows up in Update History as successfully installed but not in the installed updates. System restore is of no support here. The network configuration page shows normal. The web does not appear to be affected. I made a new network connection for the printer but it did not work.
Is there a way to reverse this update or should I uninstall the 802.11 LAN card and let windows re-install anew.
The printer is a HP Officejet Pro 8600e
Okay, so in Windows 7 I am able to connect my wireless to my phone, and run an ethernet cable over to my Xbox. If I use the ICS feature and configure it under services to allow ports 88 and 53 UDP, it works fine. This also allows my Xbox to seemingly add to this list of ports as it finds necessary.
The issue is however, with Windows 8, although I can connect to Xbox Live the same way, it does not seemingly allow the Xbox to add more ports that it deems necessary. This leads to that NAT error message that I am actually trying to do this as a way to bypass it.
In Windows 7 this only works if the connection is set to Home (not sure about Work), but not public. I'm curious if the reason this does not work in Windows 8 is that Windows 8 does not have a Home option, but rather only Private or Public settings. There is some small setting buried deep somewhere that I just need to change to treat it like Windows 7 allows Xbox to treat home networks and configure/add ports automatically.
I would like to make a folder share from a tablet with windows 8 with password protected to a laptop of windows 7 and another of vista. I have followed the tutorial of File Sharing - "Share with" & "Stop Sharing" in Windows 8. My PCs have been set in the same workgroup and same user account, network discovery and file and printer sharing turned on. At the first time, it is OK for windows 7. However after some changes of account (delete and create them on both windows 8 and windows 7), it doesn't work anymore with the error from windows 7 "Login failure: user has not been granted the requested logon type at this computer" whenever password protected turned on in windows 8 and only OK when password turned off.
View 1 Replies View RelatedI just bought a Lenovo Y500 a couple of days ago and it came with a pre-installed Windows 8 everything seems working fine but when it comes to Wifi it randomly disconnects a lot , sometimes shows limited access and most of the time the signal strength bars keep going up and down.
View 6 Replies View RelatedI re-installed Windows 8 yesterday evening (thought it would be quicker than to cleanup and fix my old install) and then directly upgraded it to Windows 8.1. The problem I am experiencing is quite weird: The Operating System doesn't detect the network cable.
With that being said, do not jump straight to the "Did you turn it on and off again" questions. Here is what I have done so far:
Hardware-Side: Cross-check the cable with another computer --> Working fineCross-check the wall plug with another computer --> Working fineTest the connection with the BIOS's connection diagnostic utility --> Link detected
Software-Side: Checking if Windows was up to date --> Nothing to updateUpdating the motherboard's BIOS --> Not betterUpdating the LAN's drivers with the ones I found on the manufacturer's website --> Not better
I am wondering what is wrong with my installation. It was working A1 a few days ago, except for the issues I re-installed the operating system for.
In my network 4 Desktop running windows XP all are connected LAN cable and my modem is tplink and 1 laptop running windows 8.1 pro accessing network through wireless in my laptop network place all the pcs are visible but I am not able to ping them and when I click I am getting message that Network path not found Error code 0x80070035
View 2 Replies View RelatedMy 8.1 laptop shows multiple network connections to my Samsung Smart TV --- One as "media connections" and 3 as "other connections". Both devices are on a simple wireless network using Linksys WRT54GS.
Under the "Network" page, most of the "Properties" of the TV connections are the same except for "Serial Number" and "Unique Identifier". Did I do something wrong when setting things up? Are these extra connections harmful? Should I delete some? How?
I purchased a new Windows 8, Inspiron 15 7000 series - 7537 last December. I had been using a router at a hotel for the time, and it worked correctly. When I arrived home, I had a Belkin router, and i experienced network issues in that i could not connect to the wifi. I could connect with Ethernet cable. The problem was fixed through customer support eventually, but I now have a new Comcast router, and i'm experiencing what appears to be the same or a similar issue. I can access the internet fine by wire. With wifi, it says i have access to the internet over the internet icon in the bottom right, but i cannot access webpages. I can use skype, and communicate through it.
Here is the result from the ipconfig /all :
Microsoft Windows [Version 6.2.9200]
(c) 2012 Microsoft Corporation. All rights reserved.
C:Windowssystem32>ipconfig /all
Windows IP Configuration
[Code] .....
I really need the wifi on this router working for this laptop. Let me note that it works on other laptops, so it should be an issue with hardware or settings on this laptop.
With the following problem regarding media streaming in windows 8. Up until recently I could stream video films from my HP laptop & HP desktop onto the TV via DNLA.
After following several posts on various sites it seems that when I try to start the windows media player network in the services I get the error message "windows could not start the windows media player network sharing service on the local computer.
Error 1068. The dependency group failed to start."
In the dependencies tab in the lower box of the two "the following system components depend on this service"
The box is greyed out and the words no dependencies is displayed.
I have two wifi APs in the home and only one has an Internet connection. the other is to access the wired LAN.
Last week I updated from Windows 8 to Windows 8.1 and thought everything was going well until I started getting wired LAN dropouts.
I have traced it back to 8.1 handling connection to wifi APs. In Windows 8, I was able to have "Connect automatically" for BOTH wifi adapters on this laptop. Now when I try to connect to the non-Internet AP, Windows 8.1 announces (correctly) "Limited access" and that's what Windows 8 did too. BUT, Windows 8.1 waits a few seconds then drops the connection with a useless message, "how me solve connection problems," where there is NO problem. A limited connection for the AP to the wired LAN is OK as it was in 8.
So now I am stuck with no home LAN access unless I drop the Internet AP and connect to the LAN AP.
Also, in the great wisdom of 8.1, because it is only a "limited" connection, it does not remember the Passphrase so I have to type it in every time. So much for progress.
What to do to get past this behavior and have a "limited" connection as OK as it is with Windows 8?
I upgraded to Windows 8.1 from Windows 8 and I can no longer see the files inside the folders on my networked drive. Before I upgraded I could see them, after the upgrade - not so much. The folders are fine, I can see them, just no files visible. There's no network issues as the files are visible from my Win7 machines and my wife's Windows 8 machine. All the standard default sharing and viewing settings are correct. Even if I put the direct path in File Explorer is tells me there's nothing there. I'm absolutely baffled. I have never seen this particular type of sharing issue before. I'm a pretty savvy Network Admin so the basic troubleshooting (and standard sharing settings) has been covered.
View 6 Replies View Related
