I dual booted win 7 n 8. now i am running out of space in the drive which contains Windows 8.
Win 7 is installed on C drive and Windows 8 on D drive. How can i interchange the OS on the drive. I want to install win7 on Drive D and Windows 8 on Drive C.
I'm mostly a Linux user, but I recently bought a laptop with Windows 8 on it. After a few days dual booting I decided it wasn't for me, so I decided to delete the windows partitions and usa just Linux. I would like, however, to keep the recovery partition, so to be able to easily reinstall Windows again if I felt like I needed to, but I'm not sure what partitions should I keep. Here's a picture of my hard drive partitions as of now:
Do I need more than the restore partition? Can I get rid of the boot one? What about the recovery one? And the one flagged msftres?
I've got a HDD currently using MBR that has 2 partitions.
Code: DISK 1:Partition 1 - C: (System)Partition 2 - D: (Data)
At the moment I'm using Win 8 on the MBR HDD and I would like to convert to GPT without losing data stored on partition 2. I'll be reinstalling Win 8 on partition 1 so I can take advantage of UEFI.
I had a 17 GB unallocated partition. I changed it to a Primary partition. It is empty. Can I merge it with the C: partition ? Picture--- edit--- A picture---
View 9 Replies View Relatedusing the UEFI install instructions from this forum. I do meet all of the requirements (Windows 8 64-bit iso, ASRock Z87 Extreme4 mobo, blank SSD). When I get to Step 7 in the UEFI guide, I only get 2 partitions instead of the 4 shown(Recovery, System, MSR, Primary). I only get System and Primary. I decided to delete all partitions and just run the setup on the unallocated drive...everything worked fine. I am just wondering what the consequences are of not having those 4 partitions. I still have the UEFI interface when I boot up so it appear that is working.
View 3 Replies View RelatedI run 3 HDS. 1 SSD, and 2 normal drives.
I just clean formatted my SSD and installed Windows 8 on it, which I always put on that drive.
However I am seeing a bunch of partitions, 4 recovery partitions. Are these normal? If not, how would I get rid of them?
I have 2 partitions: System Reserved (100mb) and Windows 8 (465gb). Windows 8 is marked as the system partition while system reserved is marked as Active & Boot. Is there any way I can like split windows 8, copy the files onto the new bit of unallocated space and make that partition the system partition instead of the "old" windows 8 partition?
View 1 Replies View RelatedWhy windows 7 and windows 8 introduced a limitation when using Disk Management, and is NOT possible to create more than 3 Primary Partitions? However, using DiskPart from command line it is VERY possible, no warnings or notices.
Code: C:Windowssystem32>diskpartMicrosoft DiskPart version 6.3.9600Copyright (C) 1999-2013 Microsoft Corporation.On computer: PAINKILLERDISKPART> listMicrosoft DiskPart version 6.3.9600DISK [code]....
As far as I know, there is a maximum of 4 Primary partitions on a hardisk, or 3 primary and one extended, and IN the extended partitions more that 4 logical drivers.However, from any disk utility like the old, deprecated, and buggy Partition Magic, acronis disk partition utility, gparted Linux, parted, cfdisk, fdisk, or even on the older Windows like Xp, nt, 2000, 98, me, ms-dos, freedos, I WAS ALWAYS BEEN ABLE TO CREATE 4 PRIMARY PARTITIONS, but with the new WINDOWS 7 and the new WINDOWS 8, it appears this limitation of only 3 PRIMARY PARTITIONS instead of 4. Don't know about Vista as I have skipped that version of windows on every PC that I have build or worked.
Or is working like this because of some hidden reason which I can't figure out by myself what could It be, and the only thing that I can observe is that while technology is evolving (hardware and software), we have limitations like this, to create only 3 primary instead of 4 primary while using Disk Management from administrative tools or right clicking on the computer and "manage" console.
Personally I am a little irritated/annoyed that now the disk management is having "handicap" and I can NOT find a serious reason for this idiocratic limitation. As we are "evolving" the normal path It would be more normal to be able to use more that 4 primary on a hardisk, from my point of view, not limiting to ONLY 3 Primary.
I am using the guide to install Windows 8 over two partitions and I get the error:
Windows cannot be installed to this hard disk space. The partition contains one or more dynamic volumes that are not supported for installation. I followed all the steps 100%
Found this Get the paid version of EaseUS Partition Master at discount. Magic Partition Manager Freeware for PC/Server users. Upgrade EaseUS Partition Master Free can I use this to copy partitions?
Worked it all out, the software linked above was able to convert my Dynamic drive to a Basic drive for free!
I have an pre-installed Windows 8 in my notebook. When I first got the PC, I got only C:/ partition so I needed D:/ and for doing this I used EaseUS Partition Manager. This is just a guess but I guess Windows can't find those recover partitions that are in my HDD. I haven't deleted those partitions just created D:/ and here is a screenshot I just take to show you the partitions I have.
I have already tried copying the Install.wim from my BIOS_RVY partition which was about 9GB and I moved it to C:/WinRec and used this command as I saw it from internet : reagentc.exe /setosimage /path C:WinRec /target c:Windows /Index 1 But i still get the error:
"Insert media some files are missing. Your Windows installation or recovery medial will provide these files."
This method didn't worked so any other too. I wonder how can I refresh or some sort of return my notebook to the factory settings from the recovery parts I have.
Protecting partitions from factory reset?
View 1 Replies View RelatedI recently decided to buy an ultrabook and I got me this one: LG Z360-7416, with a ssd and windows 8 (x64). As usual, it came with a lot of garbage installed which was using almost half of the ssd storage (128GB), so I decided to do a clean install. I got me a msdnaa copy of the windows 8.1 pro (x64). So, i used a pendrive to boot up on UEFI mode and selected custom install and when i get to the select partition, it shows everything fine, i select a partition and when a click on install, it returns an error saying it cannot install on my partition (i dont remember exactly what it says), and when i click on refresh, all my partitions vanishes, even going into the prompt and using diskpart doesnt show my partitions anymore. I tried to load some drivers, but it didnt work.
I was only able to install windows 7(x64), where nothing of these things happens, it installs realy easy. I tried to install windows 8 from windows 7, like an upgrade, but after it restarts, it gets stuck also. My disk is formatted on GPT, as im using EUFI on my windows 7 installation.
Tried almost a hundred times using all solutions i found online, but always the same result. And to get even more weird, some rare times it gets to the installation part, where it says the progress, but stays on 0% of unpacking files...
Its seens to be missing some especific driver to windows 8 be able to work with my ssd, but i cant get it right, but if it came installed with windows 8, it must be a way to make then work together.
Unfortunately i deleted the recovery partitions, so im stuck on windows 7.
I have a very peculiar issue; after using various disk imaging tools such as Macrium and Paragon, my boot partitions seem to be strangely corrupted. The effects of this corruption are:
1) Plain-text boot menu instead of the new graphical boot menu,
2) Long delays before the boot menu is shown,
3) Even longer delays when doing native VHD boot, after choosing the boot entry from the menu.
I have done a lot of testing and experimentation, and on a virgin fresh installed system from the Windows 8.1 setup ISO, these symptoms do not appear. Only after I have imaged the system using the imaging tools above, do these symptoms start appearing. Unfortunately, just copying my main Windows C: partition using the same imaging tools re-creates the same issue. So I cannot rely on these partitioning tools.
I need a way - a set of commands - to re-create the boot partitions, re-initialize their BCD stores, etc. so that I can normally boot from my C: partition, as well as native VHD boot.
Needless to say, I want to avoid having to completely reinstall Windows on my C: partition, as that would be extremely time and effort prohibitive, if I only knew how to re-create and/or re-initialize just the boot partitions in question.
Recently I got my new laptop running under Windows 8.1 and was surprised with how the partitions were sized.
Here is the screenshot from the DiskManagement:
So I shrank the size of C: disk as you can see and got unallocated space. I want to attach that space to D: disk. I thought that is possible to extend recovery partition to unallocated space, then shrank recovery partition, and newly appeared unallocated then attach to D:/ disk. But failed with that.
I don't think that I really need those 900Mb and 350Mb recovery partitions and that they are useful, but it would be unwise to delete them while I don't know what are they for. Latter 20Gb recovery partition at the picture at least has the significant size to store something
I installed Windows 8/8.1 on a system with a Gigabyte GA-Z77X-UD5H MB. When I look at the SSD where Windows is installed I have one partition. I also installed Windows 8/8.1 on an ASRock Z77 OC Formula MB. When I look at the SSD where Windows is installed I have three partitions - 300MB (Recovery Partition), 100MB (EFI System Partition) and 111.27GB (Boot,....Partition). Why did the Windows 8 installer create three partitions on the ASRock system? I think I understand the EFI partition since the ASRock BIOS has a "Load UEFI Defaults" option. The Gigabyte MB does not have this option in the BIOS? Is that because the ASRock MB has truly implemented EFI and uses the EFI System Partition to store boot information?
Why was the Recovery Partition created? I built this system from scratch so there is not any third party involvement. If I reinstall Windows 8 using a new - never used SSD will I get the three partitions? If I format the SSD with one partition prior to Installing Windows 8 what will I get?
I not concerned about the loss of 300MB,why I got different partition configurations on fresh installs of Windows 8 on two different MB's/Systems?
How to hid all the partitions in the factory installed HDD for Lenovo Y580.
This is the scenario.
Firstly, i successfully migrated all of the following partitions:
OEM/Hidden partition,
C partition: boot drive/ program files and data drive &
D partition: containing drivers
from my Lenovo factory installed HDD to the SSD and to use the SSD as the primary boot drive . Now, i plan to use the factory installed HDD as my data drive. (I am using a caddy tray for this whereby i plan to swap out the optical drive and pluck in the Lenovo factory installed HDD). However, for "safety reasons" i do not plan to re-format the entire factory installed HDD but rather to keep those partitions just in case if my SSD fails.
Hence, how do i turn all the three partitions above (in the Lenovo factory installed HDD) to become dormant? I want the computer to boot up from the existing SSD but then to treat the factory installed HDD as the data drive and not to read from any of the three partitions in the factory installed HDD.
I am planning to use EASUS as my disk partition freeware.
I have Windows 8,W7,Wxp working well in multiboot. But i have Windows 8 instaled in C:but it is the 2nd partition.How can i move it to first partition ?W7 and wxp are probably on the 1st D: partition.
View 2 Replies View RelatedI am having problems installing UEFI & a Error 0x80004005 with Windows 8.1 OEM saying it can't create partitions for UEFI then creating 2 partitions for MBR installation instead. This using a 400 TB, hard drive, setup with a GPT system & nothing else & ready for Windows 8.1 to create the partitions.
The first time it happened I used MiniTool Partition Wizard Professional, to delete the partitions created by Windows 8.1 & convert the MBR to GPT, then used Wipe Disk function to erase all data and set all the bits to a 1.
The only thing that I can think is upsetting the installation is that I have left the other drives in the system including 1x3 TB drive, 1x2 TB drive and a second 4 TB drive.
The 2 TB drive has "Win 7 Ultimate" installed using MBR, the 3 TB drive is empty but ready to install Windows 8.1 setup with GPT, and the other 4 TB drive has a UEFI Windows 8.1 installed but broken.
I have also tried to install UEFI Win 8.1 on the 3 TB drive but it failed with the same error code as above.
This UEFI takes a lot to get ones head around dose't it, and me being much older than I once was makes it even harder. I have tried this installation at least 3 to 4 times now and doing these "Wipe Disk Functions" every time has so far lost me 3 whole days just in wasted time.
My Dell XPS One 2710 was delivered with Windows 8 with wrong language. Dell therefore sent me a Windows 8 MUI Recovery Media-DVD, and told me to follow the instructions on this link: [URL] .....
At the first installation attempt I got to a point where a pop up asked for drivers. I didn't know which drivers, and I thought everything was included on the DVD (but even the DVD-ROM wasn't recognized, only "Boot (X:)"). I read a tip in the Dell forum to change the boot setup to legacy. So I did and I got a few steps further to the point where you shall choose the partition(s) under the custom menu. But no partitions were found. Perhaps the reason was the 32 GB mSATA with Intel rapid storage technology.
So I did exactly the following:
1. I downloaded the newest version of the IRST-driver and extracted the files to a USB device.
2. I booted from the recovery DVD (UEFI, safety mode: ON).
3. When it asked for the driver I installed the IRST-driver from the USB device (AHCI, 64 bit, located in the driver-folder - the only words I recognized from the forums... 0:).
4. A total of six partitions were shown: Partition 1 ("ESP", System), partition 2 ("DIAGS", OEM (reserved)), partition 3 (MSR (reserved)), partition 4 ("WINRETOOLS", recovery), partition 5 ("OS", primary), and partition 6 ("PBR Image", recovery).
5. I followed the instructions in the link (above) and deleted all of the partitions.
6. I installed Windows 8 on the new partition, without further complications.
7. I ran Windows Update.
8. I installed the Dell drivers for this service tag, in the order specified by Dell, starting with chipset, card reader, IRST, audio, video, network and everything else, and with a reboot between every single driver installation. The system, including the IRST, seems to work fine so far (no exclamation marks in the Device Manager).
9. I replaced some of the software, including Dell Backup and Recovery.
I started Dell Backup and Recovery and the program initially told me that it couldn't find a recovery partition, and therefore couldn't backup the system. Other programs in the Control Panel, like File History and Storage Spaces, can't find available drives.
The Disk Management tells me the following about my 1 TB HDD:
EFI System Partition 100 MB - Recovery Partition 898 MB - Primary partition (NTFS, boot, page file, crash dump) 930.11 MB - Recovery OEM partiton 300 MB - Recovery OEM partiton NTFS 300 MB
So finally to my questions: Should I have kept one or more of the recovery partitions during the Windows 8 installation? Could this affect Windows' System Restore (I guess not since Windows creates its own recovery partitions)?
And finally: Is Dell Backup and Recovery any useful? I already have the recovery DVD in case I need a factory reset. For backup purposes I will use a cloud service, and maybe a NAS in the future. Do I even need a recovery partition?
I was installing Windows 8 at my desktop pc.Suddenly power cut occured and it caused the compute to shut down.Then when I restarted my pc again a messege appeared saying that the installation has been corrupted and it can't be continued and it doesn't log on.After that when I tried to re-install Windows 8 the setup got stuck at the "setup is starting" window.I waited overnight for it to go and the installation to start.But it doesn't happen.I have tried to re-install several times but the same problen happens again and again.So neither I can log into my computer now nor I can re-install windows.I don't know what to do.
View 9 Replies View RelatedHere: [URL] .....
Somewhere in that link it says:
During POST enter "BIOS Boot Selector Menu" by pressing F7.
Intel says: <F7> No uefi setup option in boot selection
Others say: <F8> No uefi setup option in boot selection
I say: <F12> No uefi setup option in boot selection
Lenovo Z580, my brand new laptop that is, its UEFI based and vymrdal's ISO from MSDN is also created to be installed as an UEFI Install.
Here's my issue; I am a math and science teacher in a public middle school and am outfitting my class with thirty brand-new Lenovo touch computers. I consider myself above-average savvy with computers, having worked with every version of Windows extensively since the late 80s and DOS. The only OS that I haven't spent much time on is Windows 8.
These computers are all brand-new and of course have legal copies of Windows 8 -- irritatingly, though not yet updated to 8.1. Soo...It took me a larger part of one day just to get ONE of these computers ready for class use. It involved several stages of the Windows update/reboot dance, followed by removing myriad unneeded bloatware applications, setting up multiple child accounts on the machine, and finally installing some freeware educational materials needed for instruction. It was all unbelievably tedious!
I turned around and look at all the remaining twenty-nine computers with dread. Obviously I'm trying to work out some kind of shortcut to avoid having to spend my whole summer updating each of the new machines individually. In an ideal world, I would make some sort of image of the machine that I just spent several hours updating/configuring, and then replicate that across the other twenty-nine. In terms of hardware, this shouldn't be a problem since all of the machines are exactly the same make and model. But I anticipate other problems such as, for example, the serial number of the Windows version and the computer name will then be the same on all the machines and have to be adjusted. There very well could be other issues with replicated serial numbers, etc.
I'm thinking maybe I just have to bite the bullet and work at each individual computer one of the time. And then image them individually so that when the kids mess around with them, I can do an easy restore. How I could make this work?
When I run setup I get this message:
"Something happened, We can't tell if your PC is ready to continue installing windows 8. Try restarting setup"
What can I do?
I have a Dell Inspiron 7720. I have created an uefi bootable usn flash disk with rufus 1.4b
I'm trying to boot from it so i can create a Windows 8.1 uefi installation and the problem is that the usb flash disk wont boot.
I have secure boot enabled and legacy option rom disabled.
I have a HP Envy 4 Ultrabook and I want to install Windows 8 from scratch, I put the installation files on a flash drive from a DVD of Win 8 I had, but when I go to install it, it says the "We couldn't find any drives". I have tried using DiskPart within the CMD as well, but it only finds my flash drive when I run list disk. Also, my drives are completely formatted, and I accidentally wiped the recovery partition. I tried with a USB of Win 8 Pro, and it was fine, showing all of my drives correctly, but that version is linked to another PC, so I can't install it. Also, I booted into a Linux Mint live CD and tried to install it, it sees my hard drive correctly, but the Windows install does not, I can't figure this out, never encountered it before. Is Linux my only option at this point?
View 1 Replies View RelatedI get as far as " a driver is needed to continue installation" not found, make sure its on the right media. Here is what i got done on my own..
1- BIOS setting "legacy" and U E F I" boot from USB.
2- F 9 to choose boot order.. selected USB device
3- Installation starts for WIN 7
4- Driver is needed to continue, and i have no clue what it is..some one pointed me to . f 6 f l p y-x 64 because its an HP Envy...
5- Driver not found / wrong driver..
6- Shut down restart.......................
My DVD is Windows 7 ultimate X 32, X 64..
No matter what i cant boot form my USB /U E Fl /WIN 7 pen drive.seems like its not recognized or drivers for the USB chip set not installed.. Of course using the O E M DVD of win 7 fails. because of the G P T style.
I am trying to upgrade from windows 8 pro to windows 8.1 on a samsung laptop. The download completes and installation starts.
After a while the following message appears "you cant install windows on a usb flash drive with setup"
I am not actually trying to install to a flash drive. I contacted Microsoft and after 5 hours they said that I should connect to the internet with a cable and not by wireless in order to solve the problem (this didn't work of course and I had told them that it was an install problem and not a download problem).
Until very recently i was running Windows 8 with a 240 GB Sandisk SSD as a primary and a 2 TB Western Digital Green HDD as a storage. I decided to set up a RAID 1 setup so i purchased a second 2 TB HDD and installed it.
My intent was to run windows 8 off the 240 SSD as a primary and have a RAID 1 setup for my 2TB HDDs.
I learnt that my data configuration was set to AHCI. I decided to do a complete clean install and change the sata configuration in BIOS to RAID.
After successfully creating a RAID volume using my 2TB HDDs i proceeded to install Windows off my primary. I am however having difficulties in that it will not allow me to install windows on either drive.
Because it does not contain enough free space. Clearly I have enough free space... [URL] ....
What should I do? I want to do a dual boot, so I can keep Windows 7 in case I don't like 8.1...
I formatted and deleted that partition and I tried again with 201gb, and no luck. [URL] ....
In Windows 7 I could adjust the thickness/width of the windows borders.
In Windows 8 I could not find this option in
Personalization-->Window color and appearance-->Advanced appearance any more.
Im trying to install Windows 8 (Not 8.1) but it gets stuck at the booting screen (Where setup shuold load files)
My system specs are on my profile.