Screensaver And Power Settings Are Not Working In Win 8.1
Jul 7, 2014
My screensaver and power setting to turn off the display has stopped working, and these were working the other day. The only thing I have changed is I updated iTunes. I have tried a system restore to before this and this did not fix this.
Among other things I have tried a clean boot, sfc, and checking the energy report. Clean boot did nothing and sfc gave no errors. I uploaded my energy report if any one thinks it could be useful.
I also tried to put the PC into sleep, which I don't normally do and it woke up a little while later. That gave me the following error in event viewer:
The system firmware has changed the processor's memory type range registers (MTRRs) across a sleep state transition (S4). This can result in reduced resume performance.
View 4 Replies
ADVERTISEMENT
Aug 29, 2012
I installed windows 8 on a desktop computer that had windows 7 before. Screensaver was working perfectly on windows 7. Since windows 8, the screensaver won't start, the display won't turn off after 15 minutes like I set it up in power options. Just to test, I removed all USB devices that could prevent the screensaver to start. I closed all the programs running in the taskbar, including those hidden. The screensaver won't start even if I set it to one minute.
Pressing the preview screensaver button works. But letting it go by itself doesn't.
View 3 Replies
View Related
Dec 8, 2013
I have turned sleep mode off in power settings and turned off requirement for password yet after no activity within a very short space of time I am required to log back in. How do I disable these functions for good ??
View 6 Replies
View Related
Sep 15, 2014
I build out tons of machines of all makes and models for demo scenarios. One of the things that is the same on all devices is our custom power settings.
Is there a way to copy the power settings and apply them to any new laptop we build out?
Example:
Laptop 1: Power settings are set to never go to sleep, not require passwords on wake up, brightness set to max, disable adaptive brightness.
I am hoping to be able to run a batch file or something to accomplish this on every machine I build out.
View 1 Replies
View Related
Sep 15, 2014
I've been trying to change my power options. I go into Power Saver, "change plan settings," and try to change the "On battery" setting from "Put the computer to sleep: 3 minutes" to "Put the computer to sleep: Never." (I want to make this change because I have a Dell XPS, and it can have difficulties waking up from sleep.)
I've made this change a number of times, but after a while my computer simply reverts back to the 3 minute setting on its own. So, I leave the machine alone for a few minutes, I come back, and it's asleep...even though I thought I had changed the setting to 30 minutes. And in fact, I *had* changed the setting to 30 minutes; the computer is somehow reverting to 3 minutes on its own.
View 2 Replies
View Related
Jun 29, 2013
I have a number of different drives that I use for different purposes but I only use two of them frequently.I would like for the others to enter sleep mode when not in use, but never my main two. Is there any way to edit power saving settings for individual drives?
View 3 Replies
View Related
Aug 30, 2013
Use of the Power Saver Setting in Windows 8 lowers my pc temperature (at idle) by at least 6 degrees. Using this setting, my pc now idles at 27 degrees C. When I use High Performance, my idle temp is usually at least 33 degrees, or more. For those who have problems with their pc's running warm, this is just one of the things I've found which works for temperature lowering. My biggest impact on lowering temp was air cleaning the pc case interior - getting all the fuzzy balls out...... At one point, my idle temp was in the 50 to 60 degree range and I figured my disk was failing. After checking for a possible problem, I found much of the problem was my own maintenance procedure failure. So, if your pc seems to be running rather high, look around for the simple solutions - clean pc, use power settings, etc.
View 2 Replies
View Related
Jan 20, 2014
My PC ignores all power settings and hibernates after approx 5 minutes of user inactivity. It is a Dell Vostro 200, which I had been running successfully on Windows 8 Pro. The problem appears to have been the result of upgrading to Windows 8.1.
Regardless of the power scheme settings, the PC goes into hibernation after 5 minutes of "inactivity"; i.e. if there is no user keyboard or mouse input. The hibernation also ignores most background processes, so it will go into hibernation even if I am streaming internet radio. I use Windows Home Server, and the daily backup process is currently failing because the PC wakes up to start the backup, but hibernates after 5 minutes, in the middle of the backup process.
The only exception I can find is YouTube - hibernation does not occur if I watch a video longer than 5 minutes, even if there is no user input.
I have tried various suggestions from other forums, without success:
The video drivers up to date.
BIOS is up to date, and ACPI is set to S3.
I have run power settings troubleshooter which reset power settings to "Balanced".
I have tried setting power to "Always on"
I have tried a clean boot process, disabling all start ups and other services, but the problem still occurs As noted above, the PC was previously working fine, and the only change I can identify is applying the Windows 8.1 upgrade.
View 5 Replies
View Related
Jan 13, 2014
I just had my laptop install Windows 8.1 tonight. It's a clean install, by the way. Now the problem is I noticed that every time I restart my laptop it's power plan reverts back to "power saver", I had it set on "high performance" before. I own a Samsung laptop, model is NP535U3C-A01, Series 5.
Processor: AMD A6-4455
Memory: 8 GB
Graphics card: AMD Radeon HD 7500G
It stops charging at 99%.
View 6 Replies
View Related
May 20, 2014
Why Plan Settings and 'Advanced Power Options' configuration differs from each other?
My plan Settings sets the time to sleep with computer plugged in to 25minutes whereas the advanced power options has it on 180 minutes. Same applies to other options of the power options.
I was wondering what this mess is all about? I restored both to default and set the advanced to 'Never' and manually configure the Plan Settings.
View 5 Replies
View Related
Apr 30, 2013
I was wondering how Power Plans work. Say, I have my Power Plan set on Balanced. Now it'll adapt to the Balanced settings for plugged and unplugged respectively.
my computer needs more power for a task I'm performing while I'm not plugged in. Will it be able to push itself to it's capabilities, or would it stay restricted? How about when it's plugged in?
If I would rather have "High Performance" settings when I'm plugged in, and "Balanced" when I'm not, is there a way to do that? It's clear that Power Plans work even while being plugged in, but I see no need to limit the PC while you aren't on battery.
View 1 Replies
View Related
May 4, 2014
I have recently done a fresh install of Windows 8.1 on a family member's laptop due to the amount of bloat ware etc.
Everything has gone swimmingly and all the correct drivers etc are installed/up to date.
There's one big problem though. Whenever I change the power plan it just remains the same. I.e if I have the power setting to 'High Performance' and I change it to 'Power Saving' nothing happens. The brightness doesn't even decrease.
The laptop is a Lenovo Ideapad Z580.
View 9 Replies
View Related
Nov 11, 2012
When invoking the Power User Menu, no shortcut will work except the "Run" command. This has been this way since I upgraded my Win 7 to Win 8. The short cuts do exist in the appropriate $user$/Appdata/.../WinX subfolder, but the menu doesn't seem to connect to them..
Yes, I tried using the Power User Menu Editor suggested in the tutorials, but to no avail.
As another bit of info...When I upgraded from 7, I was using the program Start Menu X (paid version) as a Start Menu replacement. As I liked the Win 8 Start Screen from using the previews for many months, I uninstalled Start Menu X. My guess this may have affected the Power User Menu in some fundamental way, as I was not able to use said menu when a third party start menu replacement was in effect.
View 4 Replies
View Related
Jul 3, 2013
I installed this screensaver, which is listed as a Windows 8 app: Download Album Art Screensaver 0.5 for Windows 8/7/Vista/XP
It installs fine and it shows up in my lists of screensavers and I'm able to preview it. BUT when I try to apply it in 'Personalization' it just says 'None.' See attached screenshot.
I was able to install another screensaver which let me apply it just fine -- sadly, the album art screensaver is the only one I want, but it won't let me do it!
View 9 Replies
View Related
May 24, 2013
The power options on my computer have stopped working. The screen does not dim or turn off automatically and the computer does not sleep automatically.
I bought my HP Pavilion 20 all in one desktop two weeks ago and then power options stopped working a week ago everything else seems OK. I looked in the console and "balance" is checked, going further, all the times are set (display dimmed 5 mins, turn off display 10 mins, put computer to sleep 30 mins). A day or so before this happened I replaced the standard (rather cheap) wired keyboard and mouse with a Logitech k360 Keyboard and m326 mouse (both wireless).
I can put the computer to sleep using the keyboards sleep button. I also temporarily changed the "Put Computer to Sleep" section in Power Options console to "never" when "Windows Photo Gallery" needed to update the face recondition on my photos transferred from my old computer (it took over 24 hours). After "Windows Photo Gallery" had finished I changed it back to 30 mins and since then no power options.
View 4 Replies
View Related
Jan 25, 2014
Backup won't finish saving unless I turn off the scren saver.
View 1 Replies
View Related
Jul 13, 2013
I7 - 2600K CPU
8.1, built upon 8, will not auto-sleep as its predecessor did.
Hybrid SLEEP has been tested both on and off, fast shutdown is off.
Monitor shutdown is 10' and CPU's is :15.
Latest video driver is installed.
"Power' troubleshooter has been run. The only issue reported: "screensaver is enabled" - which it is not (blank).
View 4 Replies
View Related
May 6, 2014
I have recently upgraded to Windows 8.1.I not able to change my pc settings as it is not working.I tried this tutorial but its showing this message.
Fix: Broken Change PC Settings link after upgrading to Windows 8.1
I even tried this tutorial.PC settings - Fix and Restore in Windows 8.1
But it didn't work.When i click pc settings its just showing a new tile.
View 1 Replies
View Related
Oct 17, 2013
After upgrading to Windows 8.1 from 8.0 I noticed that I can no longer search anything under 'Settings' (Winkey + W). I am still able to search for files and the web (Bing ads and all that) however (ie. under 'Everywhere' or Files). I have already rebuilt the index and rebooted/shutdown a few times and it still does not work.
View 3 Replies
View Related
Jul 28, 2014
I went into my power options to change some of the advanced settings and most of them are missing? I am on windows 8.1 with a week old Surface Pro 3. I want to say I read somewhere that hyper-v can cause options to be missing, but I honestly don't even know what that is and I don't have it installed.
Screenshot attached
View 9 Replies
View Related
Mar 23, 2014
I have Windows 8.1 and my settings for my recycle bin are "Don't move files to recycle bin. Remove files immediately when deleted." yet my recycle bin still fills up with the files I intend to delete.
View 3 Replies
View Related
May 31, 2014
I recently found many application would not save to correct type. Some software icons would come out to a blank or white block, but those software actually there. For example, realrecorder is running, it would come out a white block on taskbar on bottom. I tried use 'access and program default' in control panel, still not fix the issue. Ms word, and word pad also come out white blank icon.
View 5 Replies
View Related
Jun 8, 2014
I run a 7.0 speaker system connected in multi-channel analogue mode to my Creative X-Fi Titanium.
I set my speaker settings on Windows 8.1 disabling the subwoofer and checking the full-range speakers checkbox to allow the low frequencies to be handled by my satellite speakers.
I've made no changes to the settings and yet I suddenly experienced a decrease in bass after a system restart.
When I checked the speaker settings I noticed that checking/unchecking the full-ranged speakers and subwoofer checkboxes no longer made any difference. i.e. the signal still gets passed to the centre/subwoofer port on the soundcard.
Clicking on the subwoofer on the window, I can only hear sounds from my front left/right speakers. Previously, unchecking the subwoofer checkbox sends the low frequencies to the available full-range speakers.
I have tried using an optical connection on Dolby Digital and it gives the same problem.
I am running the latest driver version available.
View 1 Replies
View Related
May 31, 2014
I recently found many application would not save to correct type. Some software icons would come out to a blank or white block, but those software actually there. For example, realrecorder is running, it would come out a white block on taskbar on bottom. I tried use 'access and program default' in control panel, still not fix the issue. Ms word, and word pad also come out white blank icon.
View 7 Replies
View Related
Sep 8, 2012
I've been having this weird problem since i installed windows 8 on my system. at first i thought it is nothing, but after reading forums i found out there is some problems with my system.
in the PC Settings page, when i click on personalize, i get 3 options, two of them are Account Picture and Start Screen, it opens fine, but i am NOT able to click or edit anything in that. I'll also attach screens for some extra information.
View 1 Replies
View Related
Apr 13, 2013
Running a family PC, with different user login's. Users is leaving the PC even sometimes after logoff not putting the PC to sleep or switching on the PC, do not log in and leaves the PC running. (training of users, no result).
Task: Ensure the PC goes to sleep within reasonable time.
Sleep settings does not seem to work after user logoff. (3 different login profiles) all set to same standard "balanced" scheme. The standard scheme is changed/set to HDD off 20min, sleep 20 min, hibernate 240min.
A small app is called by screen saver logs the user off after 15 min inactivity with a 1 min warning screen. All working fine with logoff etc.
I had hoped the adjusted standard settings "balanced" was cascaded to the "logoff" state, but it seems to run it's own life after logoff, meaning the PC keeps running (screen goes black as set in the "standard scheme) however the power settings is not putting it to sleep, it takes hours...
The Ethernet card "hard wire" is set to not wake, the wireless adapter is disabled, lock screen is disabled.
Have also tried in the registry to set all default user schemes to = 5 (this was working in XP after logoff) but seems to have no effect in Windows 8. I'm not having Windows 8 pro, so GPO is not an option.
Here comes the questions:
Case, after logoff I want the PC to sleep after 20 min.
Where is the settings for "logoff" state (i.e. no user logged in and after user logoff) in the registry
How to changed the setting in the registry, meaning Dword, name, value for 20 min to sleep
View 2 Replies
View Related
Aug 19, 2013
does any driver relate to power settings? i recently installed some driver for intel devices and graphics does them probably cause problem?
View 9 Replies
View Related
Mar 19, 2013
I have this problem of not being able to customize power options. I get this error :
Furthermore creating a custom also fails
What setting my computer as a result is using. I also blue screen when my lid of my laptop shuts, im going to guess because of the lack of a profile to tell it what to do. I believe it was exception not handled monitior.sys (but im not sure)
View 1 Replies
View Related
Apr 25, 2013
I just noticed that when I go to the Power Options that the options are missing. It says the Power Plan is missing or unavailable or something such. One answer said to do a refresh or reset of Windows 8. Isn't that a bit drastic? Is there no way to do it by tweaks. I did that refresh once and lost more than I thought I was supposed to.
View 3 Replies
View Related
Nov 18, 2013
My system shuts off automatically sometimes when the power goes with UPS on. UPS is not giving any beeps or warning signs though. At this time UPS seems On though. But my computer shuts off as if I unplugged its power cable. My UPS battery is new and UPS is 6 years old.
View 9 Replies
View Related
Apr 28, 2013
I want "Hibernate" on the power menu. I can get to the power mgt. window, which appears to give me an option to check a box to put Hibernate on the power menu, but clicking on that box fails to actually put a checkmark there,
How I get Hibernate on the power menu?
View 2 Replies
View Related
