I am running windows 8.1 and have other computers on the network running windows 7.
I haven't quite got my network settings correct, but am not sure what is going on.
If I am connected to the homegroup, none of the other computers is displayed.
If I disconnect from the homegroup, they are all displayed but I can't access them.
Is it possible to give individual network computers permissions on shared folders on a non-domain network?
View 5 Replies View RelatedHave a Vista and Windows 8.1 computer on home network (Workgroup). I want to be able to have access to each others "Public Folder." When I try to open the other computer via network, I get a prompt asking for a password (credentials). Neither computer uses a password. Is there a way around this?
View 3 Replies View RelatedI created a HOMEGROUP on computers A with PRINTER hooked up.. No problem with A, B, C printing.
Now I hooked up PRINTER to computers B. Computers A, B, C do not print (unless I hook up to A).
IMHO if all computers are on the same home network, they should be able to share the same functions. What should I do to hook up the printer to B and A, B, C will print?
I have two computers on a large desk side by side. Both are running Windows 8.1
I have a drive on computer A which I want to be able to access on computer B.
I have gone into advanced sharing for the drive and enabled sharing. However, when I go to map the drive on computer B, I get an error that I don't have permission to access that drive.
What am i missing here? Neither computers are using logins/passwords for the admin user account.
it should be possible (Win 8 off course) to sync a folder or more between 2 computers, but when i try to do this, it does not work.
Am not interested in Skydrive, used it, do not like it.
My neighborhood shares a wi-fi connection. When some neighbors see my computer is connected to the network, they assume I'm awake and accepting visitors. I want to prevent my computer from appearing when you click on Network and all PC's and connected devices appear.
I'm running Windows 8. I opened a command prompt and entered net config server /hidden:yes and "the command was completed successfully". I then restarted my computer and logged onto the network, however my PC is still visible along with the other computers and devices connected to the network.
What additional steps must I take to accomplish this task?
"It's nobody's business when I'm awake and online" in Tacoma.
I would like to create a network between my Windows 8 laptop and a headless Linux box. I need to be able to browse an HTML file on my laptop that is being served by the Linux box. Note it is a direct link between the 2 computers; this connection needs to work at times without Internet. How would I create such a system?
View 1 Replies View RelatedI currently am running windows 8 pro on my main computer, two days ago I had left it on for an hour or so and when I came back to it I had no internet conection and the error message I get says there is something wrong with the drivers.
I tried for a while to fix it but had no look. The conection im using is wired and the symbol in the corner has a small yellow triangle over it and says no internet access.
After getting fed up of trying to fix it I plugged in my old computer which is running windows 7 and the conection worked fine all night.
I turned on my computer today and it was working fine still and then after leaving my computer alone for an hour or so I returned to find the internet symbol in the corner with the same yellow triangle over it saying no connection and troubleshooting said something about no ip address.
The only thing I think my main computer was doing when I wasnt on it was updating AVG then when I returned it had no connection. My windows 7 computer also uses AVG but not sure if AVG has anything to do with the problem
Ive tried uninstalling avg and making sure other firewalls are off and also reinstalling drivers but had no luck.
I have several computers on my local wireless network:
- Windows 8 Pro
- Windows Vista
- Windows XP
- Mac OS X
Right now to copy file from one to another I use USB Flash key which is pretty time consuming, especially if I have to do it 100 times a day.
So I was thinking, is there any way to share a single folder for read/write access among all those computers?
We have a 10 pc'c 6 of which run XP Pro two of which run Win7 and two run Win 8.1. I have set us all up as a workgroup with homegroup disabled on the two Windows 8 pc's. I have set profiles on the win7 and Windows 8 all to have shared file on, discover devices on and in the advanced sharing set up all setting are share file on/password off etc. All is fine except one of the Windows 8 pc's simply will not show any of the other pc's within the workgroup other than the other Windows 8 pc.
View 9 Replies View RelatedIs there a way to setup network profiles or something so that when I bring my Surface Pro to work and connect to the wireless network there it will use the static ip address I have but when I disconnect and then connect to my home wifi it will go back to DHCP? On my MacBook Pro I can go into the network settings and change the location profile I have setup for networks but I don't see anything like this for Windows 8.
View 4 Replies View RelatedI have a strange problem with Remote Desktop on Windows 8 RTM. I have two servers at home, with several virtual machine on them, and only uses Remote Desktop to connect to my servers and VM. I'm using Windows Server 2008 R2 on my servers and Windows 7 on some of my test VMs. I have no problems at all connecting to all my servers and VMs from my Windows 8 computer.
But I can not connect to any of my Windows 8 VMs. I have enabled Remote Desktop, I have added my user, I have set password in Windows 8, I have opened the firewall. But still, I can't logon from my Windows 8 Enterprise computer. It's only says that I use the wrong login info. But I use the right one.
Another strange thing is that I can connect from any other Windows 8 virtual machine to one of the Windows 8 VMs with Remote Desktop enabled. So I know all the settings is correct. And the issue is not on my Win8 VMs, but on my computer.
I have tested this issue on two computers now, one with Windows 8 Enterprise and one with Windows 8 Pro. I have found out that if I use a Microsoft account as user on my computers (not local account) I can't connect to any other Windows 8 computer. I can connect to Windows XP, Windows Server 2003, Server 2008 R2 and Windows 7.
If I use a computer with a local account, I can connect to all types of Remote Desktop, also Windows 8 (all versions). I'm using Remote Desktop allot, and had plans for setting up a Windows 8 RDC VM on my server to use for my "desktop". But since I'm using Microsoft account on both my laptops, RDC do not work against Windows 8 RDC.
If I use a Microsoft account on my virtual machine, with the same logon info as my laptops, I can connect from my laptops also. But I do not want to use my e-mail and password on every virtual machine I setup, and I wont use local accounts on my laptops.
I bought two new, cheap, Gateway computers for the office, but I need to get them upgraded to Pro so that I can join them to my domain. The computers are pretty decent, though, both w 4GB memory, and one's a dual core, and the other a quad; the dual rates at a 4.1 WEI, and the quad is a 4.5.
My Win 8 media was created from my MS Action Pack subscription and should be valid for upgrading this computer.
I tried all of the standard install options for Win 8 from that media, but each time the computer goes through the whole process and finally reboots itself back to where it was before and simply says "Windows 8 Upgrade Fails".
I've thought about wacking the partitions, and installing 8 from scratch, but I guess I'd rather not if I didn't have to...
how I can get this upgrade to go through?
Oh yeah, and where is the setup log? I looked in C:windowspanthersetuperr.log but that file was empty.
Laptop - Vista service pack 2 Desktop - Windows 8.1
Both computers can see each other, but they only see the "Public" files. I would like to access the entire hard drive of the laptop. I turned off the password protection, right clicked "Share with everyone".
I am trying to get file sharing to work with my win 8 machine and my OS X Server. The computers are on the same network with the same workgroup but I can't seem to connect. I was able to connect with the wife's win 7 home machine until I upgraded it to win 7 Ultimate now it wont connect either.
View 1 Replies View RelatedOkay, so in Windows 7 I am able to connect my wireless to my phone, and run an ethernet cable over to my Xbox. If I use the ICS feature and configure it under services to allow ports 88 and 53 UDP, it works fine. This also allows my Xbox to seemingly add to this list of ports as it finds necessary.
The issue is however, with Windows 8, although I can connect to Xbox Live the same way, it does not seemingly allow the Xbox to add more ports that it deems necessary. This leads to that NAT error message that I am actually trying to do this as a way to bypass it.
In Windows 7 this only works if the connection is set to Home (not sure about Work), but not public. I'm curious if the reason this does not work in Windows 8 is that Windows 8 does not have a Home option, but rather only Private or Public settings. There is some small setting buried deep somewhere that I just need to change to treat it like Windows 7 allows Xbox to treat home networks and configure/add ports automatically.
I would like to make a folder share from a tablet with windows 8 with password protected to a laptop of windows 7 and another of vista. I have followed the tutorial of File Sharing - "Share with" & "Stop Sharing" in Windows 8. My PCs have been set in the same workgroup and same user account, network discovery and file and printer sharing turned on. At the first time, it is OK for windows 7. However after some changes of account (delete and create them on both windows 8 and windows 7), it doesn't work anymore with the error from windows 7 "Login failure: user has not been granted the requested logon type at this computer" whenever password protected turned on in windows 8 and only OK when password turned off.
View 1 Replies View RelatedI just bought a Lenovo Y500 a couple of days ago and it came with a pre-installed Windows 8 everything seems working fine but when it comes to Wifi it randomly disconnects a lot , sometimes shows limited access and most of the time the signal strength bars keep going up and down.
View 6 Replies View RelatedI re-installed Windows 8 yesterday evening (thought it would be quicker than to cleanup and fix my old install) and then directly upgraded it to Windows 8.1. The problem I am experiencing is quite weird: The Operating System doesn't detect the network cable.
With that being said, do not jump straight to the "Did you turn it on and off again" questions. Here is what I have done so far:
Hardware-Side: Cross-check the cable with another computer --> Working fineCross-check the wall plug with another computer --> Working fineTest the connection with the BIOS's connection diagnostic utility --> Link detected
Software-Side: Checking if Windows was up to date --> Nothing to updateUpdating the motherboard's BIOS --> Not betterUpdating the LAN's drivers with the ones I found on the manufacturer's website --> Not better
I am wondering what is wrong with my installation. It was working A1 a few days ago, except for the issues I re-installed the operating system for.
In my network 4 Desktop running windows XP all are connected LAN cable and my modem is tplink and 1 laptop running windows 8.1 pro accessing network through wireless in my laptop network place all the pcs are visible but I am not able to ping them and when I click I am getting message that Network path not found Error code 0x80070035
View 2 Replies View RelatedMy 8.1 laptop shows multiple network connections to my Samsung Smart TV --- One as "media connections" and 3 as "other connections". Both devices are on a simple wireless network using Linksys WRT54GS.
Under the "Network" page, most of the "Properties" of the TV connections are the same except for "Serial Number" and "Unique Identifier". Did I do something wrong when setting things up? Are these extra connections harmful? Should I delete some? How?
I purchased a new Windows 8, Inspiron 15 7000 series - 7537 last December. I had been using a router at a hotel for the time, and it worked correctly. When I arrived home, I had a Belkin router, and i experienced network issues in that i could not connect to the wifi. I could connect with Ethernet cable. The problem was fixed through customer support eventually, but I now have a new Comcast router, and i'm experiencing what appears to be the same or a similar issue. I can access the internet fine by wire. With wifi, it says i have access to the internet over the internet icon in the bottom right, but i cannot access webpages. I can use skype, and communicate through it.
Here is the result from the ipconfig /all :
Microsoft Windows [Version 6.2.9200]
(c) 2012 Microsoft Corporation. All rights reserved.
C:Windowssystem32>ipconfig /all
Windows IP Configuration
[Code] .....
I really need the wifi on this router working for this laptop. Let me note that it works on other laptops, so it should be an issue with hardware or settings on this laptop.
With the following problem regarding media streaming in windows 8. Up until recently I could stream video films from my HP laptop & HP desktop onto the TV via DNLA.
After following several posts on various sites it seems that when I try to start the windows media player network in the services I get the error message "windows could not start the windows media player network sharing service on the local computer.
Error 1068. The dependency group failed to start."
In the dependencies tab in the lower box of the two "the following system components depend on this service"
The box is greyed out and the words no dependencies is displayed.
I have two wifi APs in the home and only one has an Internet connection. the other is to access the wired LAN.
Last week I updated from Windows 8 to Windows 8.1 and thought everything was going well until I started getting wired LAN dropouts.
I have traced it back to 8.1 handling connection to wifi APs. In Windows 8, I was able to have "Connect automatically" for BOTH wifi adapters on this laptop. Now when I try to connect to the non-Internet AP, Windows 8.1 announces (correctly) "Limited access" and that's what Windows 8 did too. BUT, Windows 8.1 waits a few seconds then drops the connection with a useless message, "how me solve connection problems," where there is NO problem. A limited connection for the AP to the wired LAN is OK as it was in 8.
So now I am stuck with no home LAN access unless I drop the Internet AP and connect to the LAN AP.
Also, in the great wisdom of 8.1, because it is only a "limited" connection, it does not remember the Passphrase so I have to type it in every time. So much for progress.
What to do to get past this behavior and have a "limited" connection as OK as it is with Windows 8?
I upgraded to Windows 8.1 from Windows 8 and I can no longer see the files inside the folders on my networked drive. Before I upgraded I could see them, after the upgrade - not so much. The folders are fine, I can see them, just no files visible. There's no network issues as the files are visible from my Win7 machines and my wife's Windows 8 machine. All the standard default sharing and viewing settings are correct. Even if I put the direct path in File Explorer is tells me there's nothing there. I'm absolutely baffled. I have never seen this particular type of sharing issue before. I'm a pretty savvy Network Admin so the basic troubleshooting (and standard sharing settings) has been covered.
View 6 Replies View RelatedWhen I click network while i am in windows explorer, the network infrastructure is not there, only the Computer is visible there and i want to fix something by changing the properties of my modem/router on the network infrastructure.
View 5 Replies View Relatedwithout the likes of logmein?If I enable remote login on my pc, what needs to be done in my router (if anything) so I can remote in from wherever I want? I am running Windows 8.1 pro X64 router is netgear R6300
View 7 Replies View RelatedI have Windows 8.1 Pro installed signed in with my Microsoft a/c. I have some folders shared on the network through Wifi. I also have an Android device with a File Manager that has SMB capabilities.
Now I want the to connect to my shared folders through the app which works perfectly fine. But what my requirement is that if anybody else want to connect to those shared folders (with the same or another app), I have to give out my Microsoft Account password for that.
Is there a way that I can avoid this password giving? What I'm looking is for creating another set of credentials to access the shared folders without giving away my Microsoft account details. I assume I can create a local account and do the same. Is there any other way I can do this?
Unable to figure out a default setting.
Simply for the home desktop and want to share with other kit on the home network.
When I boot up it appears I have to always tweak the settings :
1) Control Panel > System > Change settings > Network ID and select under "Select the option that best describes your network" so I opt for I tick "this is a home computer; it's not part of a business network."
2 )The reboot.
All works fine and all devices can be seen and read/write in accordance with the appropriate share settings.
Now the issue is when I next reboot the
Control Panel > System > Change settings > Network ID and select under "Select the option that best describes your network" will default to "This computer is part of a business network; I use it to connect to other computers at work".
So I have to got through steps 1 and 2 again.
How to I get Windows 8.1 Pro x64 to default to the "this is a home computer; it's not part of a business network." on each boot without having to manual configure.
I have up until a few days ago been able to modify and save my network properties ok. I connected a new DisplayLink USB docking station that lead to an update of some sort. I believed this to be to do with associated drivers. I let this go ahead and it may well have nothing to do with the problems I have been having.
First of all I couldn't even see the IP parameters and kept getting an error as follows:
"In Order to Configure TCP/IP, You Must Install and Enable a Network Adapter Card"
The wired and wireless was working in environments where I could use DHCP so I was confident the hardware was ok. Uninstalling the drivers and then updating them has got me passed this problem so I can see and edit the IP parameters. However now they are never saved. I edit them, close the window, re-edit them and they are back to automatic settings! I need to use static settings in the office.
So far as I can see there are 2 possibilities:
1. I don't have permissions to save these settings, wherever they are stored. But I have administrator permissions. Where are the settings stored? I have saved them before. How can I get access to be able to save them again?
2. Something else is overwriting the settings. How do I find out what and stop it?