Have a Vista and Windows 8.1 computer on home network (Workgroup). I want to be able to have access to each others "Public Folder." When I try to open the other computer via network, I get a prompt asking for a password (credentials). Neither computer uses a password. Is there a way around this?
View 3 RepliesI have two computers on a large desk side by side. Both are running Windows 8.1
I have a drive on computer A which I want to be able to access on computer B.
I have gone into advanced sharing for the drive and enabled sharing. However, when I go to map the drive on computer B, I get an error that I don't have permission to access that drive.
What am i missing here? Neither computers are using logins/passwords for the admin user account.
I have several computers on my local wireless network:
- Windows 8 Pro
- Windows Vista
- Windows XP
- Mac OS X
Right now to copy file from one to another I use USB Flash key which is pretty time consuming, especially if I have to do it 100 times a day.
So I was thinking, is there any way to share a single folder for read/write access among all those computers?
I have a Windows 7 desktop pc and a Windows 8.1 laptop. The problem is that I can't get a reliable connection between them to enable transfer of files, and it's only one-way when it *does* actually work. I'm not using a Homegroup, but just sharing various folders.
Perhaps I should mention here that the laptop used to have Win 7 Home Premium 64-bit on it and connection between it and the Win 7 pc were fine, in both directions - the change to Win 8 wasn't an upgrade but a clean install on a spare hard drive. So I'm thinking it's something to do with Win 8, but I'm not an expert in networking so I could be wrong.
Anyway, I have *never* been able to get the Win 7 pc to connect to the Win 8 laptop, as every time I try I'm being asked for a username and password - what these would be as I have never set them up, and when I installed Win 8 (it upgraded to 8.1 a week or two ago) I opted to not use a Microsoft login. However, my account name (which is the Administrator account) and Windows passwords are the same on both machines.
From the Win 8 laptop I *can* connect to the Win 7 pc, but it's odd - if I go into Windows Explorer on the Win 8 laptop I can see all of the files in the shared folders on the Win 7 desktop, but if I do this again a minute or two later it won't work and I'll be asked for a username and password to connect! I'm assuming the username is the name of the account and the password is the Windows password, which don't work.
I've tried setting-up a Homegroup, but this didn't work as again I'm being asked from both machines for a username and password. I've also tried all the usual network sharing things like turning on file and printer sharing, not using passwords etc but nothing's working for me. I've even disabled the firewall on both computers, but it had no effect.
It's become difficult as I'm having to transfer files via USB stick between two computers which are only 5 feet apart.
Is it possible to give individual network computers permissions on shared folders on a non-domain network?
View 5 Replies View RelatedI created a HOMEGROUP on computers A with PRINTER hooked up.. No problem with A, B, C printing.
Now I hooked up PRINTER to computers B. Computers A, B, C do not print (unless I hook up to A).
IMHO if all computers are on the same home network, they should be able to share the same functions. What should I do to hook up the printer to B and A, B, C will print?
I would like to create a network between my Windows 8 laptop and a headless Linux box. I need to be able to browse an HTML file on my laptop that is being served by the Linux box. Note it is a direct link between the 2 computers; this connection needs to work at times without Internet. How would I create such a system?
View 1 Replies View RelatedI currently am running windows 8 pro on my main computer, two days ago I had left it on for an hour or so and when I came back to it I had no internet conection and the error message I get says there is something wrong with the drivers.
I tried for a while to fix it but had no look. The conection im using is wired and the symbol in the corner has a small yellow triangle over it and says no internet access.
After getting fed up of trying to fix it I plugged in my old computer which is running windows 7 and the conection worked fine all night.
I turned on my computer today and it was working fine still and then after leaving my computer alone for an hour or so I returned to find the internet symbol in the corner with the same yellow triangle over it saying no connection and troubleshooting said something about no ip address.
The only thing I think my main computer was doing when I wasnt on it was updating AVG then when I returned it had no connection. My windows 7 computer also uses AVG but not sure if AVG has anything to do with the problem
Ive tried uninstalling avg and making sure other firewalls are off and also reinstalling drivers but had no luck.
I have 2 machines connected via my router/hub (wired). One is running Windows 8.1 and the other Windows 7. Previously I had them sharing perfectly until I did a reinstall of Windows 8 (upgraded to Windows 8.1). I get this message on both machines whilst trying to access shared drives (permissions enabled to read, write, modify for all users):
I have a local account on the windows 8.1 as per previous installation. I have checked all the usual sharing settings and they are the same as in the previous working installation on both machines. I have left the homegroup and created a new one on the windows 8 machine and rejoined on the windows 7 machine all to no avail.
when extracting an archive to the same network location on which the archive itself resides, why is it that I'm having local bandwidth usage?
As you can see, there is simultaneous ~150Mbit/s upstream/downstream on my local ethernet adapter. WHY? As far as I am concerned there should be no meaningful traffic since it's actually a copy process on the local hard disk of my server.
I was wondering if it was possible to share an internal hard drive over the homegroup network or any other possible way that I can view video files on it on my tv?
View 1 Replies View RelatedI am trying to find a solution to transferring large files (100+GB) between myself and a client of mine at a different location through the internet. The easiest one I have found was through a Private Network through Logmein's Hamachi, as you can browse other connected computers' files through this network.
Of course, to show the shared drives by the host computer, you need to input a username and password through the UAC. Obviously, if I insert my own username and password, I can see the folders I've shared. However, how do I configure a username/password for my client? Are these users the same as local users? I would like to avoid having to make a local user for him on my own computer.
Just for reference, I have no control over my network I am connected to, so no FTP, no port forwarding etc.
OS: Windows 8.1
I just bought a new Intel NUC which i installed a clean and fully updated Windows 8.1 Pro on. I want to create a networkshare on this machine, which everyone can just access (read permissions) to view the content of a folder or drive.
I am trying to access the drive on another (my own) installed Windows 8.1 Pro (also fully updated). Every time i try to access the machine through the Network explorer in Windows i will be prompted to enter credentials.
I have checked the network settings following this article (amongst others): Network Location - Set to Private or Public in Windows 8 on both machines.
I also checked all the sharing settings on both machines (private/home network, allow external connections, allow all types of connections, allow sharing without password etc. etc.).
I am a bit dazzled as to why the machine keeps asking me to enter credentials. This is standard protocol nowadays? (I wonder how that would work on a machine that has a local user without a password).
I have Four PCs, one is my home Desktop (HOME-PC) and Others are THREE laptops with different names connected to one wifi netowkr. I often share folders from my HOME-PC so that other users can access them, but I can only share a folder with 'Everyone' but How do I share a folder in such a way, that only LAPTOP1 can access it?
View 4 Replies View Relatedit should be possible (Win 8 off course) to sync a folder or more between 2 computers, but when i try to do this, it does not work.
Am not interested in Skydrive, used it, do not like it.
My neighborhood shares a wi-fi connection. When some neighbors see my computer is connected to the network, they assume I'm awake and accepting visitors. I want to prevent my computer from appearing when you click on Network and all PC's and connected devices appear.
I'm running Windows 8. I opened a command prompt and entered net config server /hidden:yes and "the command was completed successfully". I then restarted my computer and logged onto the network, however my PC is still visible along with the other computers and devices connected to the network.
What additional steps must I take to accomplish this task?
"It's nobody's business when I'm awake and online" in Tacoma.
We have a 10 pc'c 6 of which run XP Pro two of which run Win7 and two run Win 8.1. I have set us all up as a workgroup with homegroup disabled on the two Windows 8 pc's. I have set profiles on the win7 and Windows 8 all to have shared file on, discover devices on and in the advanced sharing set up all setting are share file on/password off etc. All is fine except one of the Windows 8 pc's simply will not show any of the other pc's within the workgroup other than the other Windows 8 pc.
View 9 Replies View RelatedHave a question regarding "Local Account". I'm having problems connecting to the Win 8 laptop from Win 7 as it will not accept my sign in credentials. With that, am I to assume that this is because the credential aren't "Local", and thus this is what this is for???
It will not accept the "Microsoft" account I use to log into Win 8 laptop.
With that, if I choose to go with the "local account" can I easily switch back to the Microsoft one?
I took a 10:42 minute video with my camera. It's 1.28 GB and the file type MTS. The issue is I need to email it and it's too big of a file to send whole. I'm not in favor of chopping it up, but will if this is the best idea. I want to keep the video private between a few people. I am aware most place such as youtube, vimeo(not enough space) and dropbox all have privacy settings. Though waiting eight hours for an upload is a bit lengthy.
View 2 Replies View RelatedI had added an additional user account, and then later deleted it, however it keeps showing up as an option when you right click on a folder, click "Share With" it is still an available "user" to share with. How do I remove that user from the dropdown?
View 9 Replies View RelatedI have been trouble sharing files with windows 8. I basically went into network & sharing center and turned all of the options to ON (or yes, whatever lol).
The machines are both running windows 8 on a wifi network.
I noticed a few things: If you right click the wireless network, you can "toggle" and turn on/off file sharing. This is a tad confusing, windows 7 never had this option. Also, do you need to be on a "homegroup" in order to share on windows 8?
There are a million variables!
Variable 1: Variable 1 is comprised of a million different variables and is the "network and sharing center". I Have all options set to "On", and still can't share.
Variable 2: Variable 2 is the right clicking on the WiFi network and clicking "turn network sharing on or off". Mine is set to off at the moment, but why is this separate from variable 1?
Variable 3: The final variable I can think of having a homegroup. I don't have a homegroup setup right now, do I need all machines to be on a homegroup to start file sharing between computers?
What I want: I want to be able to share entire computer contents between machines.
Back in the windows 7 days I used to be able to hit "run" and type in //computerame/c$ and I had complete file access to other computers on the network. How to accomplish that with Windows 8? That way I can access all files, not just "shares" on computers on the network.
PS: Right now, when I try to connect to other machines on the network, I get a username/password prompt. No matter what I input I get an error and it won't work.
I'm having trouble sharing files from my Vista Laptop to my new Win 8.1 laptop. I can get into my shared public folder but nothing else. I want to be able to get at anything in my C drive but it says I don't have permissions. I have a home wireless network but I also hooked them together with an Ethernet cord and both networks are showing.
Last week I was running into a window asking for network credentials on the Vista laptop (but I didn't know what it meant because I never had a password ). This time I see the folders I've shared but can't get into them except Public folder.
I was trying to share my c drive to my network and took it too far. I ended up changing permissions and now I cant access the c drive or any program, I am locked out. What now ???
View 3 Replies View RelatedI have 2 windows 7 pc's with same login-name/password that I can password protected share fine folders between them. Fron Explorer I right-click a folder and share it to the other pc by entering in the login-name/password. I know this is how it is suppose to work and it does. Now I'm trying to share folders between a newer windows 8.1 pc, the windows 7 pc's and think I know why it does not work, but not how to fix it. This is because I do not know windows 8.1 very well.
The Windows 8.1 pc has a different login/user-name of "uuuuu ttttt", a different password pwp, a ms account of hhhh@hhhhh.com a computer name cccc and the same workgroup name as the 2 win 7 pc's. I put a "uuuuu ttttt" user account with the pwp password on a win 7 pc which has a computername pc-pc, a login-name hh and the same password pw. I also put a hh/pw user account on the win 8.1 pc.
No matter what I enter for for a computer/user name when I try to share a win 7 folder with the specific windows 8 user account it says it cannot find that user. I think I should type in the Add box "ccccuuuuu ttttt".
When I try to share a win 8.1 folder ff it goes to advanced sharing and I can share, but does not let me exactly specify the the win 7 user, but just a general share. The win 7 pc then shows the share under network, but right clicking it says I do not have permissions for ccccff"
I do not seem to understand sharing in either direction with a windows 8.1 pc.
I have an orange crossover cable that I have connected to both machines and I set up sharing on both but the Windows XP machine doesn't show the 8.1 machine. I'm trying to pull some movies and music off my 8.1 laptop because I use my XP desktop as a media server of sorts.
I can't figure out how to get them to recognize each other and my connection just says "limited."
I have just set up two new laptops running windows 8, and can successfully share files, and the printer connected to one of them, but I would like to also connect my laptop running Vista to be able to print. I can see both Windows 8 machines in file manager/devices on the Vista machine, but if I try to connect it asks for a username and password.
I haven't been able to work out what username it is looking for - tried a lot of combinations for each PC name with the homegroup password and log on passwords, but nothing seems to work.
I had to buy a new laptop that I could take with me to work, and of course it runs Windows 8 (which I absolutely hate, incidentally). I decided it would be nice if I could share files with my primary computer when I'm at home, which is a desktop running dual-boot Win7 and Ubuntu.
I initially set up a homegroup, but whenever I try to access laptop files from my desktop it always pops up with a "enter network username and password" dialog. I tried looking up solutions to that but so far haven't found anything that works. I made sure the clocks on both computers were the same, and I made sure that all network settings were the same on both, including the setting "do not use user accounts/passwords," but I'm still having the issue.
So, what's the best way for me to share/sync files on my laptop with the desktop's files while I'm at home?
I have a windows 8 laptop with a 3G USB modem. I'm trying to share it's internet connection via my wifi network. The other two pc's on the network runs XP and Vista.
I've managed to get the network working, all pc's see each other and they can share files, etc, but just the damn internet won't share.
I've changed my router to use the same ip range as the wifi on the windows 8 pc, 192.168.137.x. I've ensured that the modem's network connection is shared. all the pc's belong to the same workgroup called, WORKGROUP.
In services i have ICS running, i've tried restarting this service.
What bothers me is that my wifi network on my windows 8 pc shows as "unidentified network", even though i have made sure that everything is set to shared that should be set to shared. so i don't know if that could be part of the problem?
I've also tried setting up the vista pc with a static ip and setting it's default gateway and primary dns to the same ip as the Windows 8 pc.
Attached are screenshots of my ipconfig.
I am trying to set up a workgroup, not a homegroup, and all of the target computers are setup in the default group "WORKGROUP." I'm using a workgroup to allow cross platform sharing. Anyways, when I right click on a folder then Share With > Specific People > Add the workgroup is not listed.
View 8 Replies View RelatedAfter discovered that my C:Users folder was shared by default, I right clicked the folder and unchecked "Share this folder" in Advanced Sharing under Share tab. I also went into Control Panel - Folder Options - View and unchecked "Use Sharing Wizard". However, as soon as the computer restarts, the C:Users folder is back to being shared again. "Use Sharing Wizard' under Folder Options remains unchecked after reboots. I am using Windows 8 Pro.
View 9 Replies View RelatedI have Laptop and Desktop (windows 7 ultimate) I use it to play games, But I wanna transfer my Games (files) to my new laptop using Ethernet Cable or Crossover cable. I lost my 16 gb USB so I just transfer via Ethernet Cable but How?
View 4 Replies View Related