Network / Sharing :: Slow WiFi On Lenovo P585 - Blocked Torrent Site
Apr 28, 2014
Lenovo P585. The wifi does not work all that well...... It either switches between 2-4 bars infrequently or it takes 10-20 seconds for a page to start loading. My drivers are up to date.
Recently it has gotten worse and sometimes it says I have no connection all together. My tablet and other computers connect fine enough and don't have the same 10-20 delay for a page to load.
Also a torrent site I go to frequently has not been loadable for over a month. The torrents also don't seed. The site will only load on my Windows Phone 8 with wifi on and 4g off. This lead me to believe that my ISP is not blocking the site.
I get this on any PCs in the house: Error code: ERR_NETWORK_ACCESS_DENIED
Not sure why this happens, every other page loads fine.
View 5 Replies
ADVERTISEMENT
Mar 13, 2013
so I bought my laptop two months ago (a Vaio SVE1112M1EW) and was able to connect to Wifi in my house easily. But then when I moved to other places, I wasn't able to connect to any Wifi spot!
When I come back home I can connect again. So I think the Wifi should be working but the settings are not right.
View 7 Replies
View Related
Jul 9, 2014
This problem has just started several weeks. I use internet by my router WiFi connected to my PC it just keep disconnecting from the WiFi after i always reboot my PC then i can connect again but today i tried to restarting my computer and try to reconnect but i cannot find the WiFi network, i don't know why.
Now i am using WiFi USB, but its very slow and i also tried to disconnect it and if the WiFi network will stay or not, unfortunately directly after disconnect the USB, the WiFi disappear.
My PC is Lenovo Windows 8 ...
View 1 Replies
View Related
Feb 27, 2014
I have just installed 8.1 on my laptop and now my wifi card wont connect to the network. My PC works on wifi just fine.
My laptop is a Lenovo G405 using a 802.11n Broadcom card.
View 9 Replies
View Related
Oct 24, 2013
I installed Windows 8 in my notebook, Lenovo 3000 G430. It worked fine for a while, but after I had a long shutdown, when reboot again, the Wifi was not working. The drivers are still there, and when activating the Wifi from Fn F5, it goes to Airplane Mode.
I removed Windows 8 and reinstalled Window Vista, the Wifi came back and working fine. I tried this many round, it produced the same result.
I believe that it is compatible issue with the driver for the Wifi. Can some one able to provide the driver for BROADCOM Wireless 802.11g for Windows 8?
View 2 Replies
View Related
Jun 4, 2013
my wifi seems very slow under Windows 8 and is acting like its been "capped" by something.
When running Windows 7, I was getting approx 60MB actually download rate off of my apparent 120MB Virgin Media service, now that I am on Windows 8 it appears to be running at 20MB.
The drivers have been updated to the one that was on the manufacturers website, before the update was applied my download was capped at 1MB.
Does something need changing / tweaking on Windows 8 to make it more friendly to high speed broadband?
View 6 Replies
View Related
Sep 9, 2013
I just bought the satellite C40D and I connected wifi, but internet speed is extremely slow (.2mbps), but when i connect to Ethernet it goes unto like 19~24mbps range. My router is d link and setting is aes wpa2-personal I have done many research, but nothing seems to work.
View 3 Replies
View Related
Aug 20, 2014
Some basic info:
New HP Pavilion 14 Touch w/ Windows 8.1. (purchased directly from HP)
Intel Core i5 1.7GHz/2.4GHz, 64-bit
Broadcom 802.11 bgn Wi-Fi adapter
Wireless Router: Arris TG862G Router.
My laptop was able to connect to my home router in the initial setup of the computer, but within about 1-2 hours I was disconnected entirely. A day passed and I was able to reconnect, but at noticeably slower internet speed. This lasted for about a day until, once again, it disconnected entirely this evening. Any attempt to reconnect is met with, "Can't connect to network".
View 9 Replies
View Related
Apr 2, 2014
I'm trying to map my box.com cloud storage using "Map Network Drive".
I found the "Map Network Drive" button at the top of my folder. I click on "Connect to a Web site that you can use to store your documents and pictures". I follow through "Choose a custom network location"
At "Internet or network address" I type the url where I would log into box through the internet: [URL] .....
At next I get the login prompt, so I login, clicking "Remember my credentials" , when it returns, indicating that my login is incorrect the number of letters in my password has doubled, so of course my password is incorrect if the "network drive" is adding a bunch of extra characters.
So I go back and click on "connect using different credentials" and get the same result ....
View 6 Replies
View Related
May 10, 2014
I don't know how this happened but for a week every time I open my msn homepage this Lenovo site opens like a attachment to my home page. How can I eliminate this.
View 2 Replies
View Related
May 11, 2014
Basically, whats happening is, it says connected to the internet, however, it won't load any site. We've attempted this on Internet Explorer, Firefox, and Google Chrome. The weird thing is, we have found that she can connect to sites by using the site's IP, but not with the actual address. Also, Skype is working perfectly fine with the connection. Its just, web addresses that cause a problem.
Running on Windows 8 and her computer model is a Satellite c55-A and the processor is intel(r) core(TM) i3-3120m cpu @ 2.50ghz 2.50 ghz. The manufacturer is Toshiba.
Also, this was a problem encountered on any router connected to. However, if we can not get this solved, will resort to attempting to restore to factory settings.
View 9 Replies
View Related
Oct 12, 2013
Ok, so my computer was having connection problems, and basicly, when I did the scan, this came up.
"Your system can not send or receive fragmented traffic over IPv6. The path between your network and our system supports an MTU of at least 1280 bytes. The path between our system and your network has an MTU of 1276 bytes. The bottleneck is at IP address 2001:470:0:136::2. The path between our system and your network does not appear to handle fragmented IPv6 traffic properly."
View 7 Replies
View Related
Mar 26, 2013
I am setting up an Acer Iconia that has Windows 8 installed and after setting up the server connection I can't access Windows Store. The message i get is: "Your network proxy doesn't work with Windows Store." I have changed firewall settings to allow the tablet through the firewall but still get that message. What is the ip address for Windows Store so I can allow "no user authentication" for it?
View 2 Replies
View Related
Jan 19, 2014
I was running Windows 8 x64 without any issues. Recently I updated to 8.1 and am having a weird issue.
The internet works fine for general browsing and even for streaming like netflix or pandora/spotify. However, when I am using a program other than a web browser that pulls information in from a server based on data that I enter, it seems like it isn't going through. It is like the program doesn't even see the internet.
I am a pilot and have a program that allows me to input data and retrieve charts and other pertinent information for my proposed route. When I enter in the data and press the button to retrieve the charts, etc, I get a message saying error downloading files. At first I thought it was this program or a problem with their server. However, over the past days every program that I use that pulls information from the internet is doing the same thing more or less. I have weather planning programs that can't get map or weather data; I have flight and rout planning programs that can't even retrieve the listing of airports, and I have performance calculators that will not receive any information. These are just some of the programs that I use. They are all made by different developers and connect to different servers. I can't even get a basic application to receive NOAA weather data.
I tried adding a firewall rule for the applications and when that didn't work, I disabled the firewall all together through the advanced settings. I also disabled windows defender. There is no other AV program running on my machine at the moment and it still will not connect. Then again, oddly enough, I can use the internet fine from a browser. There have been no changes other than 8.1 being loaded.
View 7 Replies
View Related
Feb 6, 2014
I often unzip compressed folders sent to me by email containing several pdf files. When opened in file explorer the preview pane is blocked.
I have to right click and select properties, then click unblock button individually on each file if I want to preview them in the preview pane.
Any way I can set an option either to not automatically block these files when transferred from compressed email attachment to the folder?
Or any way I can use the parent directory and unblock all the files in all the subfolders at once?
View 2 Replies
View Related
Dec 30, 2013
I have a lenovo G505 laptop - it will no longer connect to my BT home hub despite it showing as being available. I suspect it might be to do with the fact that it is has a passkey - I entered it yesterday when prompted and it connected fine, but now I'm not being given the option of entering the key.
I've also tried connected using the BT wifi (as opposed to homehub) but once again it will not connect me. I've been through all the troubleshooting options, and searched under every term I can think of, but nothing is working.
View 2 Replies
View Related
Jun 8, 2014
I have three computers on my home network:
(a) desktop in the office with ASUS USB-N53 adapter
(b) new desktop in the office with fairly old Broadcom PCI 802.11g adapter
(c) media box hooked up to TV hard wired to router
I recently mapped a drive on system A so that it could be shared with system B (they are side by side). Unfortunately, upon trying to transfer files the speeds are terrible! I am only getting between 500kb/s and 1mb/s.Is this due to my relatively old wireless G adapter?
View 9 Replies
View Related
May 1, 2014
I have suddenly had a strange problem occur. Everytime I restart my Windows 8.1 desktop my internet connection speed drops from it's normal 50Meg to around 3Meg when running any speedtest programme. The only way to cure this is to uninstall & re-install my network adapters through device manager. All is ok then until my next reboot & then it all happens again. It is the same on both the Ethernet connection & the wireless adapter. I have tried re-installing drivers etc to no avail. Something strange about my network setup. I have also ran various virus scans but nothing showed up.
This suddenly started last Saturday & I cannot see what could of caused it, haven't installed any new programmes or anything.
All my other devices are ok including a Windows 8.1 laptop.
View 9 Replies
View Related
Aug 2, 2013
Is there a way to setup network profiles or something so that when I bring my Surface Pro to work and connect to the wireless network there it will use the static ip address I have but when I disconnect and then connect to my home wifi it will go back to DHCP? On my MacBook Pro I can go into the network settings and change the location profile I have setup for networks but I don't see anything like this for Windows 8.
View 4 Replies
View Related
Mar 8, 2013
I'm having trouble keeping my lenovo laptop (running windows 8) connected to the internet. I have been able to connect successfully to multiple wireless networks and access the internet until I tried to connect to the new network.
Initially everything is OK - I can connect to the network and access the internet. However after a short period of time (anywhere from a few seconds to 20 minutes) the network connection will change to limited, without internet access. If I simply disconnect and reconnect to the network the internet will immediately be working again (at least for a few seconds/minutes).
Alternatively, if I run the troubleshooter, I always get the message that the default gateway is not available, which has been fixed by resetting the wi-fi adapter.
View 9 Replies
View Related
Oct 15, 2013
I just got a new Windows 8 laptop, a Lenovo Y510p, and I've been having several wireless issues with it. Pretty early on my computer froze up so I had to force it to shut down. After resolving the issue, I was unable to load any websites, however a flush of the dns cache fixed the problem right up. Fast forward a few hours, and suddenly I can't connect to the router in my dorm room-I just suddenly lost my connection and now I can't reconnect.
My roommate has a router set up for our room connected to an internet jack in the wall. It is configured as WPA2-PSK. I usually connect to this when in the room, but now I can't-windows just says "can't connect to this network". There is wifi throughout the dorm already, which I can connect to just fine, however the signal isn't as strong.
This is a link to my ipconfig : ipconfig - Pastebin.com
View 3 Replies
View Related
Aug 10, 2013
I just bought a Lenovo Y500 a couple of days ago and it came with a pre-installed Windows 8 everything seems working fine but when it comes to Wifi it randomly disconnects a lot , sometimes shows limited access and most of the time the signal strength bars keep going up and down.
View 6 Replies
View Related
Jun 9, 2014
I purchased a new Windows 8, Inspiron 15 7000 series - 7537 last December. I had been using a router at a hotel for the time, and it worked correctly. When I arrived home, I had a Belkin router, and i experienced network issues in that i could not connect to the wifi. I could connect with Ethernet cable. The problem was fixed through customer support eventually, but I now have a new Comcast router, and i'm experiencing what appears to be the same or a similar issue. I can access the internet fine by wire. With wifi, it says i have access to the internet over the internet icon in the bottom right, but i cannot access webpages. I can use skype, and communicate through it.
Here is the result from the ipconfig /all :
Microsoft Windows [Version 6.2.9200]
(c) 2012 Microsoft Corporation. All rights reserved.
C:Windowssystem32>ipconfig /all
Windows IP Configuration
[Code] .....
I really need the wifi on this router working for this laptop. Let me note that it works on other laptops, so it should be an issue with hardware or settings on this laptop.
View 8 Replies
View Related
May 10, 2014
I have two wifi APs in the home and only one has an Internet connection. the other is to access the wired LAN.
Last week I updated from Windows 8 to Windows 8.1 and thought everything was going well until I started getting wired LAN dropouts.
I have traced it back to 8.1 handling connection to wifi APs. In Windows 8, I was able to have "Connect automatically" for BOTH wifi adapters on this laptop. Now when I try to connect to the non-Internet AP, Windows 8.1 announces (correctly) "Limited access" and that's what Windows 8 did too. BUT, Windows 8.1 waits a few seconds then drops the connection with a useless message, "how me solve connection problems," where there is NO problem. A limited connection for the AP to the wired LAN is OK as it was in 8.
So now I am stuck with no home LAN access unless I drop the Internet AP and connect to the LAN AP.
Also, in the great wisdom of 8.1, because it is only a "limited" connection, it does not remember the Passphrase so I have to type it in every time. So much for progress.
What to do to get past this behavior and have a "limited" connection as OK as it is with Windows 8?
View 6 Replies
View Related
Dec 7, 2012
I prefer to keep my home WiFi network from public view by disabling the SSID broadcast, i.e "hiding" the network.
With two modem/routers (a Belkin Play Max F7D4401 ADSL modem/router and now a Cisco EPC2325 DOCSIS modem/router) on two computers (home-built desktop and Acer TM8172T notebook), after the initial connection Windows 8 Pro would not reconnect without tediously re-entering the SSID name and password. Once it does connect, it displays the original SSID name with a new one with an incrementally increasing appended number like:
I was manually deleting them all (except the original) using netsh, until I realized you can <right-click> on an entry in the screen above and choose "Forget this network."
This is the process I go through each time to re-connect. Is there something I'm missing?
I read that if Windows 8 saves too many WiFi connections, it cannot "remember" them to automatically reconnect to them, so on the notebook, I deleted all but wpcTrue (the original), and it now automatically reconnects, although occasionally it will add a new connection with an incrementally increased number -- currently the notebook shows both wpcTrue and wpcTrue 2. I had used the notebook on the road, so had about five WiFi connections saved. On the Desktop my home network is the only WiFi connection I've ever made. However, no matter what I do on the desktop, it NEVER remembers to automatically log on when the SSID is not broadcast.
I even tried manually setting up a connection via Network and Sharing Center > Set up a new connection or network, to no avail -- the desktop computer will not automatically reconnect.
I doubt that this is relevant, but the Belkin modem/router, the Belkin USB adapter I use on my desktop computer, and the notebook's Broadcom internal modem are all b/g/n. The Cisco modem/router is b/g.
If I "unhide" the SSID, i.e. broadcast the SSID, all is well in the world. Both computers automatically reconnect to the modem/router. If I hide the SSID, and then disconnect or reboot, the desktop computer will not automatically reconnect.
I just noticed that the pop up WiFi connection column shows "WiFi-2 Off" -- what does the "Off" mean?
And, why is it "-2" ? My notebook just shows "WiFi', period. (The first image with "WiFi (Off)" was from a previous Windows 8 installation on the desktop computer. I decided to change from EFI-boot to non-EFI so reinstalled Windows 8. I simply used the old image as a quick way to show how the connection name assignment runs away.)
View 3 Replies
View Related
Jun 27, 2014
How can i create local WIFI network without having internet access on my pc. This seems to work if I have access to internet but when i disconnect internet connection my PC ( virtual router ) cannot see anymore other devices..
All other devices that are connecting to my virtual hostednetwork are working without any problems expect my pc. What have i missed that my PC where virtual hostednetwork is running cannot see devices in "virtual" network without internet access?
View 3 Replies
View Related
Jun 16, 2013
My ISP provides service only via 802.11. I use laptop A most of the time. The captive portal for the service provider only allows one login per account at a time. The policy is intended to prevent multiple people sharing one account. It's just me, I'm the only user, but very occasionally I'd like to have a 2nd laptop access the internet simultaneously. No abuse, just the simple convenience of not having to logout from A if I need to use B for 30 seconds.
What I want to set up seems simple and it probably is:
WiFi Internet <---> Laptop A <---> ethernet cable <---> Laptop B
Such that Laptop B can share A's active WiFi connection without having to request its own unique address from the ISP.
At present, Laptop A has its network interfaces set up so:
- WiFi is connected, active, functional. Selected the "Yes turn on sharing and connect to devices" in sidebar.
- Under the wired network properties IP Version 4, I manually set addresses to be
IP 192.168.10.1
Subnet 255.255.255.0
Gateway 0.0.0.0
Laptop B has only a wired network, set to
IP 192.168.10.2
Subnet 255.255.255.0
Gateway 192.168.10.1
A & B can connect directly to each other, share folders, etc.
What do I need to do in order to get laptop B to transparently use A's WiFi connection? My guess is that A needs to be set up to do some routing between the internet side and the 192.168.10 subnet, and B needs to be set up to look to A as its "ISP" ... but I don't know where to begin.
View 2 Replies
View Related
Jun 23, 2014
I am using Windows 8.1 and all the computers in the network have good speed but only one PC has internet issues.
I even reinstalled Windows but that didn't solve my issue.
I even reset the router, upgraded its firmware but all in vain.
If I disable the network adapter and enable it then the internet works for like five minutes but then it stops working again. I even changed the wire connecting the PC to the router.
I have also disabled the firewall.
View 2 Replies
View Related
Apr 8, 2013
I just brought a new Gateway desktop PC. It had Windows 8 preloaded on it. I am experiencing very slow internet speed.
View 2 Replies
View Related
Jan 29, 2014
Updated my system from 8 Pro x64 to 8.1 pro x64 this past weekend. Ever since speeds from my computer to other computers on our home network (some Win 7, some Win 8) and especially to my two Synology Diskstations have dropped during file transfers from averaging 70/mbps running Win 8 to 22/mbps now running 8.1 .
Updated the NIC driver for the Realtek RTL8111E built-in to my mobo (ASRock Z77 Pro 4) to the latest Oct 2013 but no difference.
View 5 Replies
View Related
Dec 7, 2013
I am using a Windows 8 pro pc connected to the internet wireless. My modem is a 802.11g and my speed should be 8 mb down 1 mb up. However, on the PC I am only getting 1.2mb down, 0.5 mb up on speedtest. When I open a W7 HP laptop, I do get about 8 mb down as stated. Weirdly it is only affecting my pc. I have run the test continuously between the PC and the laptop and the laptop perform better. Tried IE and FF, the speed is slow. My PC specs should be good enough for a fast connection. No folding or torrent or whatever is running in the background, yet the pc is slow. The ping time is faster than the laptop at 42 ms.
View 5 Replies
View Related
