I can set up sharing of my internet connection with the WiFi hotspot connection and it works fine until I restart my PC.
Then it reverts to a different setting and I have to manually change it back.
Is there a way to make the internet connection sharing settings permanent?
How to reset the internet driver back to it's default settings?
Windows 8.1 Enterprise 64bit
Okay, so in Windows 7 I am able to connect my wireless to my phone, and run an ethernet cable over to my Xbox. If I use the ICS feature and configure it under services to allow ports 88 and 53 UDP, it works fine. This also allows my Xbox to seemingly add to this list of ports as it finds necessary.
The issue is however, with Windows 8, although I can connect to Xbox Live the same way, it does not seemingly allow the Xbox to add more ports that it deems necessary. This leads to that NAT error message that I am actually trying to do this as a way to bypass it.
In Windows 7 this only works if the connection is set to Home (not sure about Work), but not public. I'm curious if the reason this does not work in Windows 8 is that Windows 8 does not have a Home option, but rather only Private or Public settings. There is some small setting buried deep somewhere that I just need to change to treat it like Windows 7 allows Xbox to treat home networks and configure/add ports automatically.
I'm having a serious problem trying to connect my other laptops running windows 8, the host laptop that is connected to internet with modem is Compaq Presario g56 laptop also running windows 8, I'm connected to the internet with my evdo modem and this laptop is browsing fine, I download mhotspot to share this connection, this other computers are connected but showing limited connection in their network and sharing panel, the modem have access to internet and the private network I created on the host computer also show access to internet, so why are other computers connected to this computer are not browsing with this internet connection. attached is the screen shot of the host computer this problem had been persistent for more than one week
View 2 Replies View RelatedI am having trouble with ICS on win 8. On my old laptop (win xp) I used to be able to share my 3Connect dongle internet to connect to Xbox live. I recently got a new laptop with win 8 and whenever I share this internet connection I can never connect on my Xbox (the network to internet part fails). When everything is connected up and shared the Ethernet says 'Unidentified Network' which i believe is the cause of the problem. I've read i may require a driver update but i cannot seem to find one.
My Laptop: Toshiba Satellite C855-29N
what to do, maybe i am not setting up the connection sharing properly?
I have a Asus Laptop operating with Windows 8.1. It connects to wifi but none of the desktop icons can get to the Internet. Meanwhile most window tiles in the start menu have Internet access . For example I have the application "MegaTube" and that application has access to the Internet. As well as the weather app, which updates when connected to the Internet.
View 3 Replies View RelatedIs there a way to setup network profiles or something so that when I bring my Surface Pro to work and connect to the wireless network there it will use the static ip address I have but when I disconnect and then connect to my home wifi it will go back to DHCP? On my MacBook Pro I can go into the network settings and change the location profile I have setup for networks but I don't see anything like this for Windows 8.
View 4 Replies View RelatedIt was working earlier but couple of hours later when I booted up my Windows 8 laptop.. There was a red x on the network I was trying to connect to and a message saying my computer settings not matching.
I looked it up on youtube and I tried selecting "No authentication" and for encryption type I chose "None". But still didn't work.
Sometimes it would say limited first then when I try to reconnect the message above will appear.
I cannot connect to my wireless anymore (all other devices in my home do) since windows has automatically installed the drivers for my canon printer.
In PC setting i do not have the button wireless anymore (i am pretty sure that i had it last week). Wi-Fi (Qualcomm Atheros AR964x) is in my network connections, but cannot connect. Diagnoses says problem with wireess adapter or access point.
So what did i do until now : I have restarted the whole interne installation ( rounter, and all other devices) many times Atheros driver is up to date and device status is "working properly"
i dont know anymore what to do more (except switching to linux and not being able to use some commerical software i rely on for my work) :-(
Network Location - Set to Private or Public in Windows 8
I have a home network, several PCs connected to a modem/router (all with Ethernet cables), with ADSL access.
One PC has got Windows 8.1, with network settings as "private network", with sharing ("find devices and content") turned on. I am thinking about turning it off, to increase security, since I don't need to share files an printers.
My questions:
1) There is no risk to damage Windows by turning sharing on or off, with that "find devices and content" option in Windows 8.1?
2) After changing the sharing settings, I do not need to change any settings in Windows Firewall, such as resetting it to default?
I do a lot of AV system programming, which generally involves having to set my IP address for either my Ethernet port or WiFi card to manual IPs temporarily. I am having an issue on a relatively clean install of Windows 8 Pro that after I change my IP, when I go back into TCP/IP v4 to change it back to DHCP, it is already set to automatic... but if I right click on the connection icon and go to Status, it still has the static address. I tried to set it to another manual address and to hopefully go back in to revert, but that doesn't work.
The ONLY thing that seems to work is removing the NIC from Device Manager and then re-scanning for hardware changes where it will be automatically detected with DHCP enabled by default.
WiFi card is Intel Centrino Ultimate-N 6300 AGN.
Ethernet NIC is a Broadcom NetXtreme 57??.
I've got the latest available drivers, and using generic ones doesn't work. It's also on both NICs so I don't it is a driver issue.
There is this peculiar problem I'm facing with MTU settings.
I'm using PPPoE with wifi enabled on Windows 8.1.
Couple of months back:
ADSL MTU setting was promptly set to 1492 (8 bytes for PPPoE header discounted).
All of a sudden, yahoo mail was not accessible.
When I tried
Code: ping -f -l 1464 mail.yahoo.comPacket needs to be fragmented but DF set. Packet needs to be fragmented but DF set.Packet needs to be fragmented but DF set.
Packet size of 1464 (MTU:1492 - 28 bytes for adjusting different header size) is big. So decided to change MTU.
I checked for various packet sizes; First ping was OK for packet size of 1452. So MTU can be set at 1480.
I changed the MTU to 1480 in modem setting and restarted.
When connected, I tried yahoo mail again - and again failed.
I checked the MTU which is set at 1480. I tried ping with packet size of 1452 and got surprise. I got "Packet needs fragment" again. The same size was working earlier.
I repeated the process. Now the MTU came to 1460. I set the MTU again in modem and restart and try yahoo mail again to get the same failure.
Again I ping with packet size 1432. Nope. Got "Needs fragment" error.
Changed MTU setting in Modem to 1400 - retry cycle - same issue.
Changed MTU setting in model to 1300 - retry - same issue.
Then I came across setting MTU for interfaces in PC. So reverted the MTU to 1492 in modem.
Set the PC interface MTU as below. I set it for WiFi interface as I was using wireless Internet access.
Code: netsh interface ipv4 set subinterface "Wi-Fi" mtu=1460 store=persistent
This solved the problem.
Today I couldn't access yahoo mail. Checked the MTU setting for PC wifi interface. It has been reverted to 1500 (default). May be some windows update did that.
I set it back to 1460. Tried to access yahoo mail. Still not accessible.
Checked the ping with size of 1432 (for MTU 1460). Got "Needs fragment" error.
Checked ping with packet size 1400 - OK - change interface MTU to 1420 - Still couldn't access yahoo.
Checked ping with pkt size 1400 - now not OK.
Checked ping pkt size 1360 - OK - Change interface MTU to 1300 - still couldn't access yahoo mail.
Checked ping pkt size of 1360 - now not OK.
This seems to be vicious cycle. What is happening?
So i always when i try to go to my router settings or test my speed i always notice that my ip is changing every day.
View 7 Replies View RelatedI just got a network usb adapter for my new Windows 8 built PC. In the devices area of the control panel it shows the network adapter as installed, and working. However, when I got to PC Settings there are no wireless settings shown, and unlike my other computers around the house I can't find my network or any other networks which is very stranger since I live in an apartment and I'm surrounded by like 20 different networks.
View 4 Replies View RelatedHow can i create local WIFI network without having internet access on my pc. This seems to work if I have access to internet but when i disconnect internet connection my PC ( virtual router ) cannot see anymore other devices..
All other devices that are connecting to my virtual hostednetwork are working without any problems expect my pc. What have i missed that my PC where virtual hostednetwork is running cannot see devices in "virtual" network without internet access?
Something keeps changing my proxy settings. Every time I change it to "Automatically detect settings", something is changing it to "Use a proxy server for your LAN..."
View 9 Replies View RelatedI don't want to use the DNS servers of my ISP and I don't know how many times I changed over to third party DNS
servers now.
But 2 weeks later when it occurs to me to check, they are almost always back to Auto, i.e. the ISPs.
Why does this happen and how can I prevent it?
I have installed Windows 8.1 on my laptop. My laptop is Hp 6510b. Windows 8.1 is working fine for me. But the only issue I am facing is that I am unable to see my Bluetooth in Settings. Hence I am unable to transfer files. My android is also not searching my laptop.
View 1 Replies View RelatedI just got a brand new Samsung Laptop for work. I dont know a ton about windows 8 either im fairly new to it. I work at a mental hospital doing security and we are allowed to have a laptop for over night shifts. I have an Alfa wireless antenna (cause i get low signal where im stationed) along with my normal laptop Wifi.
Heres the story. I was using my laptop antenna then out of no where it said "Identified Network (no internet access)" then my internet just stopped. I had this happen on my old laptop and it lasted a few days then worked like normal again. Then i switched to mt usb antenna and it worked fine for about 20 mins then all of a sudden it went it "Identified Network (no internet access)". So I was stuck with no internet. I tried looking up fixes on my ipod and i tried 3 Ways To Fix The Unidentified Network Error in Windows 8 and it didnt work I tried How To Fix Unidentified Network Windows - YouTube and it didn't work either. I'm dying here cause I have to sit in a room for 12 hours tonight with no way to keep my self from falling asleep or entertained.
So I'm rolling along the internet and I start noticing that the wifi bars in the lower corner have gone down to 4. My internet is running slower and when I log on and play online games, the local server which gave me a 50 ping is now jumped up to about 300-800 easily...
So I run trouble shooter (and malware bytes) and this gem pops up:
"Windows cannot automatically detect this network's proxy settings."
I run google chrome as my internet browser, but as of late Norton has been blocking chrome and my wife started using Internet Explorer...but when we disable Norton, Chrome works fine.
I'm using Win 8 Pro and i'm on a Private network which happens to be my Home Network. I'm having problem saving HomeGroup settings; I went through Change Advanced Sharing Settings then I checked Turn on network discovery and Turn on file and printer sharing, I clicked save and but when I return to the setting page again, the settings are not saved.
I've tried this several times but nothing seems to be working out. The same thing still happens when I go through Charms >> Change PC Settings >> HomeGroup >>Libraries and Devices.
The Windows App Store will not open. It spends a while thinking about it, then eventually times out. I would like to update to 8.1, but I think this is evidence of a bigger issue.
I think the real problem in my proxy settings in IE. The LAN settings have the Use Proxy Server permanently checked. No matter what I try, it wont uncheck. I have tried selecting the automatically detect settings box and putting in a dummy config. I ran Malware sweeps, ran virus sweeps, I removed any IE Add-ons. Reset IE. But it still wont let me uncheck that box..
It looks like there is a manual override within the Registry.
I signed up for a DNS service a while back. When I stopped using their service I removed their DNS entry from the ipv4 settings and considered it done (this was all they stated for install/uninstall, just update the DNS in ipv4)
At random, the PC will revert back to their DNS server. I have no virus (Malewarebytes Pro), my hosts file is empty.
Here's what I've done:
1) Removed it from ipv4 settings manually and reset to Obtain DNS Automatically
2) Open cmd as admin and ran the following sequence:
ipconfig /flushdns
ipconfig /registerdns
ipconfig /release
ipconfig /renew
netsh winsock reset
netsh int ip reset
3) Reboot
On reboot, everything is normal, anywhere from 24 hours to 30 DAYS later it automatically reverts back to their DNS servers. I am on a .edu domain. I do not have access to the router, but I never modified anything in the router. Why my PC keeps reverting to their DNS servers?
I use a USB modem in Windows 8.1 laptop. I want to share the internet to other devices by creating a hostednetwork. I used the netsh commands to create and start the hostednetwork. The wifi hotspot got created as 'Local area network connection *14. The internet from the USB modem was shared to Local area network connection *14. Other devices are able to connect to this and are getting IP address in the range of 192.168.137.X. The issue is that, the devices are not able to access internet. in troubleshooting this issue.
Don't give the instructions to create a hostednetwork or advice to use 'Virtual router plus'. I have already done all sorts of basic troubleshooting. Everything looks fine, but there is no internet connection to other devices.
I am able to share internet using the same USB modem with same method in Windows 7.
I got this problem on my laptop Asus u38dt under Windows 8.1 a couple of months ago. It cannot connect to any network either via Wi-Fi or Ethernet (I tried an external USB Wi-Fi adapter as well, with the same result). In case of getting IP with DHCP, the network is shown as Unidentified network with no address assiged (IP is like 169.*). When static IP enabled, the network name is correct. But in both cases, connection is Limited and with No Internet access.
Connection can't be established with any router while other devices connect properly with them, so the problem is on the laptop side.
With all of this, any ping, even to 127.0.0.1, results in General failure.
When booted in Linux liveUSB, network works fine, so it is clearly not a hardware issue.
I tried resetting TCP/IP stack with "netsh int ip reset", reinstalling drivers, reinstalling the network adapter, and lots of other methods and still it doesn't work. Restoring system is not an option since I don't have any restoration point prior to the problem anymore.
Mobo is a Gigabyte 970A-ud3
cpu - AMD-FX 8 core
Ram 8gb gskill
PC lost connection to internet before I reinstalled a clean copy of Win 8. I went in to device manager disabled Ethernet driver,then enabled it-still no connection!
could it be my isp ? ,laptop works fine.
I have an Asus Aspire laptop with windows 8 on it. Recently my laptop has refused to load we pages. It says it is connected to the wifi and it will load the opening page for Google Chrome. If I try to go any further than that, it says the web page is unavailable.
View 3 Replies View RelatedTrying to fix my wife's computer (Toshiba Ultrabook, purchased 08/2013, Windows 8 as a standalone workstation) - I haven't been on it ever before; not very Windows 8 fluent.
Symptoms:
Can't load anything in IE or Firefox, including local router web interface
Can't RDC or FTP
CAN ping websites
On login, balloon appears:Failed to connect to windows service; Windows couldn't connect to the Windows All-User Install Agent service Service isn't running, but starts on my command without issue. It's set for Automatic startup. Starting service does not resolve any issues.
Ran SFC... From cbs log:
DIRSD OWNER WARNING - about 600 instances, mostly in C:windows
"Ignoring duplicate ownership for directory" another 600 instances
My wife's account is an Admin account. While in her account, I created a new user account, also admin. This new account has the same issues as my wife's.
As another bit of info, this weekend my wife used an older WD external USB HD for the first time. She didn't experience any difficulties, except the "safely remove device" attempt was never successful. Not sure if this is correlation or coincidence.
I have a laptop I bought last fall with Windows 8. Everything has worked fine until just now. I had internet a moment ago and now it is telling me that there is no connection available. I have checked to see if the wifi was turned off. ALl my other devices are working fin. I went to check that the wifi was turned on in the laptop and it shows no wifi at all....
View 1 Replies View RelatedFor many years I've always hibernated my computer when I'm done for the night, then wake it in the morning and continue where I left off. For the past week or so when I wake it up I have no internet connection. I have run the self repair thing (I forget the name off the top of my head) which usually fixes any problem I have but this time it says it can't solve the problem. I tried Googling for an answer and the only solution I could find didn't work. That is to go into Device manager > Network Adapters, and disable "Allow computer to turn off this device to save power". That didn't sound like a good answer anyway since this did work before and now it suddenly doesn't.
My specs are:
Win 8.1 Pro x64, Core 2 Quad 2.4 GHz, GeForce GTX 470, 8GB RAM
From yesterday I am having my trouble connecting to internet my laptop shows that it's connected to wifi but when I load any pages it gives dns error I contacted my ISP and they gave me all the settings but still no luck but when I ran Linux through DVD internet worked so my windows is having problems not the router I have Wi-Fi connection. Sometimes it's shows connected and sometimes limited but whatever it shows cant load any web pages except "192.168.1.1" but I can load any pages on my Android. I have attached my system log of my laptop. Link to log - dropcanvas - instant drag and drop sharing - canvas view
I tried
System restore - failed
System refresh - missing files
Uninstalled recently installed programs
Reset all network configuration using cmd