I always wonder how actually does Wireless ISP's differentiate users, as far as I can think of, they work somehow like local Wi-fi networks in which we are connected to the same router. In our home networks, our router differentiates the users/clients with their MAC address and internal IP addresses.
But, this must be different for Wireless ISP's as we can use different PC's any time.
I am trying to find a solution to transferring large files (100+GB) between myself and a client of mine at a different location through the internet. The easiest one I have found was through a Private Network through Logmein's Hamachi, as you can browse other connected computers' files through this network.
Of course, to show the shared drives by the host computer, you need to input a username and password through the UAC. Obviously, if I insert my own username and password, I can see the folders I've shared. However, how do I configure a username/password for my client? Are these users the same as local users? I would like to avoid having to make a local user for him on my own computer.
Just for reference, I have no control over my network I am connected to, so no FTP, no port forwarding etc.
OS: Windows 8.1
This morning I installed an optional update from Windows Update. It was Ralink Technology WLAN 802.11 wireless LAN card.
Since then, when I try to print to my wireless network printer, the network would disconnect then come back on after a while. The update shows up in Update History as successfully installed but not in the installed updates. System restore is of no support here. The network configuration page shows normal. The web does not appear to be affected. I made a new network connection for the printer but it did not work.
Is there a way to reverse this update or should I uninstall the 802.11 LAN card and let windows re-install anew.
The printer is a HP Officejet Pro 8600e
After discovered that my C:Users folder was shared by default, I right clicked the folder and unchecked "Share this folder" in Advanced Sharing under Share tab. I also went into Control Panel - Folder Options - View and unchecked "Use Sharing Wizard". However, as soon as the computer restarts, the C:Users folder is back to being shared again. "Use Sharing Wizard' under Folder Options remains unchecked after reboots. I am using Windows 8 Pro.
View 9 Replies View RelatedSince a few weeks, I have a problem with my laptop running Windows 8.1 (Toshiba Satellite P50-A-12PBE). Sometimes, after bringing Windows back from sleep mode, I seem to have no connection to the internet. Windows says the connection is 'limited', wether I'm connected with a wire or wireless. Resetting the router doesn't solve anything, but rebooting my pc does. Since both the wired and wireless network are always simultaneously affected, I think this hasn't anything to do with drivers (I already have the latest versions by the way). I have made screenshots with ipconfig-results when I'm connected with a wire.
View 7 Replies View RelatedI bought a new PC with Windows 8.1 and I probably set up stuff wrong at the start.
I set up my wife and 2 daughters as Administrators like me but I thought that they would not be able to see my Documents or Pictures or Music as my Profile has a password. But they were able to see all my Music, Documents and Pictures.
Previously in Windows XP, all our stuff was separate and they didn't see any of my files.
Thinking all I had to do was make them Standard Users and this would rectify the issue but obviously it didn't. I have left them at Standard Users hoping for a solution from you people here on this Forum.
So I am asking is there a way on Windows 8.1 to have my stuff Private for me and for no one to see it?
how can i set up windows 8 to allow 2 or more of users to connect to my windows 8 desktop by remote desktop connection i know there must be some way to use as when i was work experience every one one was connecting to the same comptere buy that a windows xp comptuer
View 9 Replies View RelatedI upgraded to 8.1 and now my wireless connectivity is lost. I have installed the latest driver model for my device but still it is not working
View 9 Replies View RelatedAbility to do a persistent ad hoc network on windows 8 is playing a big role in a purchase decision of mine...
Setting up a persistent ad hoc wireless network with the release version of windows 8?
In our domain we have a policy to change the wallpaper every month. The change is done from server side. Now wallpaper of most of users is changed but for few it remains the old wallpaper.
For example I have windows 8 and mine is not updated. I also have tried gpupdate /force. No luck.
This issue is only with few systems running windows xp 7 and 8.
These systems only show the last months wallpaper not the one updated.
Also these windows are fully updated as of now.
I live in an apt building that has freeWIFI. There are about 4 wifi connections Ican switch to when one is lagging. I would like to see the number of usersaccessing each connections.
Is there any freeware system monitoring tool available that will show me #number of users on each wifi connected in my building. I am running Win 8.
Enable Concurrent Sessions on Windows 7, Windows Vista and Windows XP (Termsrv.dll)
View 2 Replies View RelatedRecently I brought A new Laptop which Is A Dell Inspiron 17R Turbo
3D Inspiron 17R Turbo laptop | Dell India
As I had desktop So I had A broadband Wired Network Connection. But Here in my laptop I have a LAN Port but I have A Powerful Intel Centrino Wi-Fi.
is there any way to make my wired connection as a wirless So that My broadband connection would be at home but I could get its network In my laptop Anywhere I go through my Laptop Wi-Fi
I cannot connect to my wireless anymore (all other devices in my home do) since windows has automatically installed the drivers for my canon printer.
In PC setting i do not have the button wireless anymore (i am pretty sure that i had it last week). Wi-Fi (Qualcomm Atheros AR964x) is in my network connections, but cannot connect. Diagnoses says problem with wireess adapter or access point.
So what did i do until now : I have restarted the whole interne installation ( rounter, and all other devices) many times Atheros driver is up to date and device status is "working properly"
i dont know anymore what to do more (except switching to linux and not being able to use some commerical software i rely on for my work) :-(
I'm using Lenovo Z570 laptop. (Broadcom 802.11n Network Adapter)
Problem:- Can't switch on wifi. The on/off switch is grayed out. While troubleshooting, it says, " wireless capability is turned off".
Solutions Tried:- Re-installed drivers provided by lenovo's website.
Re-installed drivers by windows update.
Reset settings in Bios to default values.
Yes the physical switch is on and the indicator light is glowing.
Fn+ F5 just toggles on/off airplane mode.
Disabled the option so that power management doesn't switches off wifi to save battery.
Other numerous solutions on internet.
The wifi worked flawlessly in windows 7. I even used it as a hotspot (via cmd method).
I have problem wit limited wireless connectivity on my laptop (Samsung) but also on my iPhone 4 and my wife`s LG optimus 5 duo all at the same time. I changed yesterday my router speedport which performed wireless connectivity problems, with a same one- and the problem is actually the same.For every 30 minutes I have limited access on my laptop, iPhone 4 and LG 5. If i restart the router it is OK for a while, and then again the same story. Someone told me to switch off wireless option on both phones, which made connectivity normal on my Samsung laptop.
I repeated, I changed two routers and the problem persists.
After a while when i'm browsing the web etc, my wireless connection goes to Limited and there are no other wireless networks available (when there should be 10+ networks).
When i disconnect that limited connection, there are suddenly no networks found and my wireless adapter disables itself and i can't re-enable it anymore. The only thing to restart my computer.
This occures after a couple of minutes. I had this problem before, but then it fixed itself for a couple of weeks and now i have the same problem again.
I've tried reinstalling my drivers, but doesn't do the trick..
I have an Asus N76VM laptop running Windows 8.1 Pro 64 Bit with a Intel(R) Centrino(R) Wireless-N 2230 adapter.
I am connected to my router by a Ethernet cable. can i still connect to my printer wireless?
View 7 Replies View RelatedI have a Lenovo Ideapad Y500 laptop running Windows 8.1. i7, 8BG ram, 2GB Nvidia card--all that stuff. It ran perfectly for nearly a year. But now, the local area network is broken. I haven't done anything different or changed anything that would affect it, as far as I know. But now that it's summer, I have lots of free time but I can not lan any games with people, which sucks. So I googled and googled, tried the netsh int ip reset resetlog.txt (or whatever it is), tried ipconfig resets and stuff, and none of that works. The wireless lan adapter Media State is still "Media disconnected."
I took this screenshot AFTER I did OneKey Recovery (which is a factory reset). It set my computer back to the original settings: Windows 8, full of bloatware, etc. I did this reset last night, updated it, updated it to Windows 8.1, updated Windows 8.1, and finally, before I went to bed, tested the LAN. It worked, I was able to connect to my Dad's Minecraft world. So I set my laptop to start re-downloading my games (reset deleted all my data), and when I opened it up this morning to play Minecraft with my family, the LAN was not working again. I couldn't connect (or even find) the lan games.
Just setup a N router, works OK with Laptop with Win 8, but unable to connect with Win 8 Desktop. Have entered router keys OK but nothing pops up to click to connect. Been into (Settings) then (Change PC Settings), but no Wireless tab in setting. Type in wireless, PC checks (No wireless). I have Win 8 Disk, can I load wireless driver from Disk if yes how.
View 3 Replies View RelatedI just got a network usb adapter for my new Windows 8 built PC. In the devices area of the control panel it shows the network adapter as installed, and working. However, when I got to PC Settings there are no wireless settings shown, and unlike my other computers around the house I can't find my network or any other networks which is very stranger since I live in an apartment and I'm surrounded by like 20 different networks.
View 4 Replies View RelatedI am using a Windows 8 pro pc connected to the internet wireless. My modem is a 802.11g and my speed should be 8 mb down 1 mb up. However, on the PC I am only getting 1.2mb down, 0.5 mb up on speedtest. When I open a W7 HP laptop, I do get about 8 mb down as stated. Weirdly it is only affecting my pc. I have run the test continuously between the PC and the laptop and the laptop perform better. Tried IE and FF, the speed is slow. My PC specs should be good enough for a fast connection. No folding or torrent or whatever is running in the background, yet the pc is slow. The ping time is faster than the laptop at 42 ms.
View 5 Replies View RelatedI have a PC and a tablet, both of which have Windows 8.1 installed, and are regularly updated. I prefer using the wireless connection on my PC, although I do have an active wired connection. Is there a setting somewhere that disables the wired connection automatically when the wireless is active, and also switches back to wired if the wireless disconnects? I have looked into Group Policy Editor at the wireless and wired LAN settings under Network Connections, but don't see any setting to do this automatically.
View 3 Replies View Relatedmy tp link wireless router problem. The problem is related to windows 8 apps.
View 9 Replies View RelatedI have a Netgear WN111 wireless adapter on my PC. Since installing Windows 8.1 it doesn't connect automatically to the router. The PC says there are no connections available, so I can't even click on the router to try to connect. If I pull the adapter out and push it back into the USB port it connects automatically. Also, when I switch the PC off, the LED on the adapter continues to flash, so I have to pull it out and plug it in again to stop that. I've tried troubleshooting, compatibility check, reinstalling the driver and uninstalling the driver and getting Windows to install one itself.
View 9 Replies View RelatedI'm using a relatively new HP Split X2 (bought new in Dec.), and almost every day I lose internet connection due to wireless adapters being missing. I have only been using the computer to watch Netflix and listen to music. Usually the internet disconnects in the middle of an episode on Netflix, and after being on hold with HP for over an hour tonight
View 1 Replies View Relatedso I bought my laptop two months ago (a Vaio SVE1112M1EW) and was able to connect to Wifi in my house easily. But then when I moved to other places, I wasn't able to connect to any Wifi spot!
When I come back home I can connect again. So I think the Wifi should be working but the settings are not right.
So I've had a new HP Pavilion G6 for several weeks. In the last three days, every few hours it will randomly disconnect, and won't re-connect unless I restart my computer. The other laptop in the house is not having any problems, so I don't think it's the router. I tried re-installing the WiFi driver but it's still doing it.
In my Events Log I notice that before each disconnect there's an unidentified event with the Intel Wireless as a source: "The description for Event ID 5007 from source NETwNe64 cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer."
I checked previous threads on random disconnects but they all seem to deal with a connection that disconnects every few minutes, not hours.
I have a neighbor who has an OPEN network called @HOMED689 . For some reason my Windows 8 machines keep trying to connect to this SSID automatically.
I've never tried to connect to it. Once it's connected however, with limited connectivity, I don't have the ability to right click on it and say "Forget this network" or do anything to it such as when I connect to another wireless it says:
Show Estimated Data Usage
Set as Metered Connect
Forget this Network
View Connection Properties
Nothing.
I just got a computer that comes with Windows 8 and I'm trying to get on the internet with the wireless adapter I was using on the old computer but I keep getting an error message. I am able to install it from the disc but when I go to run the program it says "Can't load ProcNICs.dll" This is the adapter I am using (version 4). The most recent driver the website lists for this adapter is for Vista. Is there a way to get this to work?
View 9 Replies View RelatedThis is a random issue, sometimes I can connect just fine, and usually a restart of my laptop lets me connect.
However sometimes when I try to enter the password it does not work. I get the error message 'the network security key is not correct. Please try again.'
I know for a fact that my password is correct, and sometimes it works, allowing me to choose whether I want to 'find PC's, devices and content on this network' etc.
Regardless of whether I click yes or no at this point I don't connect. And instead I am getting to this screen below. What to enter as my username and password. As nothing to do with my wireless network has this requirement.