Recently my monitor stopped responding after being turned off (after 15 minutes). It didn't happen before. I don't know what to do. Should I disable turning off the monitor altogether? I lose all my work when this happens because the only way to get the laptop working again is to press the power button which restarts the computer although the settings are actually that it should go into hibernation when I press the power button, which it does if the display is working, but if it stops responding it restarts the laptop. No other keys work or do anything when this happens.
I installed the win 8 upgrade on my desktop yesterday. I have two monitors connected but only one of them was working, even though I upgraded the drivers for the graphicscard, I wasn't able to enable the other monitor. This is, however, not my problem.. As part of me trying to figure it out, I hit the "Devices" button in the menu and disabled the only monitor on there. I thought it was the one which wasn't working, but it turned out to be the one already working, so now none of the monitors are on and how to get them working again.
I'm guess that I'm looking for some sort of a keyboard shortcut to enable the monitor again.
Twice in last 2 weeks, some of my tiles (Games, Bing News, Store, People, Mail, etc.) have just stopped responding.When clicked, I get a blank screen, then the full Start Screen re-appears.Other tiles such as Chrome, Word and Outlook work OK.When this first happened, I did a system restore, and the problem went away, but this time the restore point seems to have gone too.The 'Change PC Settings' does not work either, as I decided to try a complete refresh, but can't access that.
Original error message: "Display driver NVIDIA Kernel Mode Driver, Version 314.22 stopped responding and has succesfully recovered"
I'm getting this error again and again, mainly in games. (Which seems logic, they use the graphics card most) Games without DX11 will continue after a black screen has occured, but at very low FPS.
Games with DX11 will just crash and stop working after the same black screen.
this morning I was playing FIFA 13, charger not plugged in and I noticed there is a performance difference between plugged in and not plugged in. The game was laggy a bit. Then suddenly, my game crash with a black screen first then a pop up yellow exclamation mark warning appears, something about :
Display driver 331.65 has stopped responding and has successfully recovered.
I restart my laptop and shut it down after some time. This afternoon I turn it on back and play FIFA 13 again but this time with the cable plugged in. The game was smooth now and the message earlier didn't appear. So this means I have to plugged in every time I want to play? And why there is a performance difference when plugged in and not plugged in?
i bought new computer few days ago.i have sapphire HD 7750 2gb ddr3 - and im installed the driver for that by the CD but after i want to play some games . i get this massage Display driver stopped responding and has recovered.
My system os is windows 8.1. I connect to this system remotely regularly. When it is off, I turn it on remotely with WOL and it autologins into windows.
This computer is connected to a LG LED TV through HDMI port.
My issue is, whenever the TV is off, and I turn on the computer (remotely or locally), system boots up fine but the start up apps (those that I have put in Windows startup folder) won't start. As soon as I turn on the TV, windows will start running those start up apps. Needless to say that if the TV is on and I boot into wondows, start up apps start normally with no problem.
Whatever I tried has failed on me. I even tried to turn off windows 8 Fast Startup in power options but it didn't work. I originally had this issue in windows 8. So I installed windows 8.1 hoping that this issue would be gone but it has not. I tried windows server 2012. In server 2012, this issue does not exist and I have no problem with startup apps.
i have a Leonovo H520 current gpu is "Radeon 5750" i recently upgraded my psu to 600w which 450 is enough for the card. but everytime im in a game my screen goes black and my game crashes and i have that error it is really annoying [URL]
I just installed my new graphics cards and successfully install new driver.
Most of time i got this error on the start up of my computer. Here an image But it did happen once,when i was playing sniper elite nazi (for about 10min) and when it crashed i had to reboot because the driver didn't recover so any other games refuse to start giving DX11 failed error or just .exe crash.
All other games work properly.
I tryed to place the card in another PCIe slot but doesn't work either. I try both Driver Beta and the official one but both failed.
I'm setting up a new Dell with W-8 Home. I'm trying to open the Group Policy to edit not asking for password when restoring from "Monitor" turned off. Already stopped it on logon. Attached is the message I get either from Run or the cmd prompt.
i installed windows 8 on my new pc who includes Shappire 7870 xt boost and monitor Samsung T220. whether i turned off the monitor manually or it turns off automatic by power saver, sometimes the monitor shows only black screen. The monitor does turns on, it's light turn on, but all i get is black screen.
i also have I5 4570 and Gigabyte GA-B85M-D3H.after i installed windows, i installed the motherboard drivers, includes Intel HD Graphics 4600. Could it conflicts with the ATI's driver?
also, when i connect the monitor to the motherboard it works fine (so far at least). but games doesn't run smoothly.
Have a 32" HD TV which I use as my Primary Monitor(connected using HDMI) and a Lenova 17" as a Secondary (connected with vga cable). I shut the desktop down, unplugged the 17" to use on another pc. When I reconnect the 17" to my main desktop it now does not pick up
Today I plugged an hdmi to vga cable into my Win 8 sony vaio, and I plugged the other VGA side of the cable into an acee 22" monitor. I then chose from the right hand windows 8 panel to "extend to monitor", the laptop screen went black, the monitor screen remained without signal (extended screen did not show on monitor) and now the laptop screen is black.
I am now stuck and both laptop and monitor screen not working.
I tried unplugging cable, pressing fn and all the f1 to f12, shift, windows button but nothing is working.
I pressed off button then switched laptop back on and it showed the sony vaio logo on laptop then the screen went black again.
how could I return my laptop screen to work and stop the screen extension which is not working and which I am sure is the case.
We have a new Windows 8 pc and have a password set on it to stop our children from going on it but we have a feeling 1 of them has and also he has worked out the password.
So is there a way to check in settings what time the pc was turned on and off?
i have looked in settings but can not see anything that would tell us.
I just purchased a Dell Ultrabook that came with Window 8. I went to the Windows store and did the upgrade to 8.1. I've read a number of articles saying that encryption is turned on by default on a clean install of 8.1 but not necessarily on an upgrade. From some of the articles I've read, I should be able to see whether my device is encrypted on the PC Info page (see attached). I do not believe it is encrypted but I don't know for sure.
I've always used TrueCrypt on my previous devices but won't bother if my new device is already encrypted.
It says it's been turned off and it's not monitoring the computer, I can't turn it on either unless I'm not doing something right. McAfee internet security suite was on the laptop when I brought, is it because of that? Should I just remove it?
Is windows defender good security on it's own or do I need more than just that? I've downloaded malwarebytes anti-malware?
I'm running windows 8.1 on my asus x550 laptop,the issue is windows firewall can't be turned off, and when it is on it blocks everything including the browsers and also kaspersky antivirus 2014.
I use tiny wall instead of the default firewall,the problem is when I turn off the windows firewall, it switches off ,but comes back on automatically in about 2 mins and blocks all internet access again.So I decided to manually disable the service from, local services that doesn't work either,it says if I do that even tiny firewall will go off.
I reset windows 8 on my alienware m15x for a fresh restart but it was taking too long and got stuck a 30% so I held down the power button. Next thing It says No Operating system detected.
I have a new HP DV6 with windows 8 and it has originally Norton internet security for 60 days
I am having 2 notifications in the action center one of them is network firewall and when I click on it it shows that I have to turn either the norton internet security or the windows defender on and when I click on norton it ask me if I trust the publisher and I click yes and then nothing happen and the notification keeps on showing. I tried to restart and update my laptop several times and nothing happens I keep on seeing this message
How can the action center tell me I am not protected while at the same time Norton tells me I am?
When I turn the wifi on the system crashes and keeps restarting utill i turn it off , also i tried refreshing the pc , it says files are missing and cannot do so ...
I've noticed sometimes when I first powerup my windows 8 machine, it turns on, but I get no display on my monitor (has happened with 2 monitors). I am using the latest beta ATI drivers for my card. The weird thing is, pressing delete i dont even get the bios to appear, just a black/dark monitor screen. I am wondering if repairing the bootloader could fix this? How to repair the bootloader? I won't loose any of my data, will I?
After turning off, turning on the computer a few times, I finally get display and can get into windows 8, but it's annoying.
My Windows Defender is turned off. I was able to click around enough until I found an area that told me that McAfee is controlling this. I don't want McAfee. But when I try to bring up or right click on Windows Defender I get a pop up that tells me it is turned off and it won't let me do anything.
When I turned on my Lenovo y410p today I got a blue screen saying:
Recovery
Your PC needs to be repaired
The Booth Configuration Data file is missing some required information.
File: BCD Error code: 0x000000d
You'll need to use the recovery tools on your installation media. If you don't have any installation media (like a disc or USB device), contact your system administrator or PC manufacturer.
The only option I have is: Press Esc for UEFI Firmware Settings
I have 64bit Windows 8. I have a Fat32 external hard drive I might be able to use to recover it - but what should I download? Also, can I try to do something in the UEFI settings to fix it?
I'm using Lenovo Z570 laptop. (Broadcom 802.11n Network Adapter)
Problem:- Can't switch on wifi. The on/off switch is grayed out. While troubleshooting, it says, " wireless capability is turned off".
Solutions Tried:- Re-installed drivers provided by lenovo's website. Re-installed drivers by windows update. Reset settings in Bios to default values. Yes the physical switch is on and the indicator light is glowing. Fn+ F5 just toggles on/off airplane mode. Disabled the option so that power management doesn't switches off wifi to save battery. Other numerous solutions on internet.
The wifi worked flawlessly in windows 7. I even used it as a hotspot (via cmd method).
Reloaded my computer and downloaded apps...and 2 times I received a different redirect virus and the first thing it does is turn off the system restore and wipe out any restore points. Then, I am screwed...
I always uncheck all the extra stuff like toolbars apps like to get you to download. The last app that did this was the weather channel app.
My question is, how can I configure system restore to require a password to disable it which a virus may not look for? Or anything to keep system restore intact ?
It is too easy for these virus' to keep folks from restoring.
I got a nasty Malware program "WeCare" from the Imgburn Install (I think) and ran Malwarebytes Anti-Malware to get rid of all the stuff it put in the registry. That seemed to work. I also ran CCleaner a couple of times. Again that seemed to work. However, now SOME of the shortcuts that I created for standalone programs - IBT, HWinfo, Prime95, SSDLife, and RegEdit show as a blank page with the upper right corner folded. I have also run into this issue on a W7 system but managed to force Windows to pick up an Icon from a different source. What file can I delete that would cause Windows to rebuild the Desktop Icons?
I found a .bat file that deletes the Icon Cache and rebuilds it. That solves my immediate issue...but...still curious on who or what caused specific Icons to go to default or whatever.
I'm on Windows 8. Compressed Folder Tools is all grayed out. I was able to zip and decompress files recently.
I tried adding the context menu extract commands, per one of the tutorials here, but I get the right click heading without any choices. how to get this ribbon command section turned back on?
I have a desktop with Windows 8 upgraded to 8.1, I can enter the BIOS setup by pressing the DEL key only when the preceding shutdown is a complete shutdown (shutdown with fast startup turned off).
If the desktop is shutdown with fast startup turned on (incomplete shutdown), and Windows cannot be loaded during the subsequent starting. How can I enter the BIOS to select to boot from a USB stick?
Today when I turned on my laptop the screen was black, not showing a thing. With no options to solve this I rebooted the laptop by pressing the power button for a few seconds.
When I restarted the laptop it started and shown the username/password screen. I input my password and then a pop up window appeared with an error related to explorer.exe
I cannot see the apps screen or the desktop. The desktop is just a black screen with a grey bar. I can access windows explorer by clicking "windows key + E" but I cannot do anything else.
Now every time I start my laptop, the error does not come up, I input my password and I don't see apps screen or desktop.
