My desktop PC sleeps, sometimes, even though I believe I have set everything in Power Settings to prevent this.
I happens only 1 or twice a week and after about 15 minutes of no activity.Most of the time I could leave my PC on for several hours with no activity and it won't sleep.
Why do so many programs just stop working, stop responding for no apparent reason??? This includes IE9, e-mail service, new printer/scanner installation, etc, etc, etc. Sometimes even writing a letter or "Save as" just stops responding. How can this be??? Windows says "we're looking for a solution", but nothing ever shows up. Is there no diagnostic that can identify the failure? Is it memory, conflict, what can be causing these annoying interruptions??? Mostly rebooting the system will clear things up.
My setup: Windows 8 PRO, CPU Intel i7 3.40 GHz 64 bit, 16 GB RAM, INTEL SSDSC solid state hard drive 223 GB (about one quarter full). I did not have these problems with Windows 7, or the Windows 8 pre releases.
I have an issue with my Windows 8 PC, as it keeps crashing (Page Fault in non-paged area). Not everyday and not while doing anything special. I can play games without any issue - and then be editing a document and it shuts down.
I replaced my HD for a SD back in May but since then i havent made any changes to the setup.
I have attached the SFdebug files.
I have a desktop running windows 8, and lately the internet has been cutting on and off for no apparent reason. Wireless still works fine with no problems, it's only the ethernet that's giving me issues.
View 8 Replies View RelatedAfter putting my computer to hibernate and powering it back on, my disk usage would stay at 100%. All the transfer speeds are around 0.1 mb/s and I'm not sure what could be causing the 100% disk usage.
Another thing is that it windows notifies me to scan my hard drive for errors, which I have done, but this keeps repeatedly happening.
I usually keep my game setups in rar formats and that saves me a lot of space over all and just recently (couple of weeks ago i think) i extracted an 8gig file within a few minutes without any problems but now i just tried to extract 4 files of 4,588,544 KB each and it says 3H:28 mins. This is a lot by any standards.
System specs as below,this problem shouldn't occur with a quad core i7.
Also the CPU usage for WinRar doesn't go above 15% for some reason no matter what i do. Tried setting priority to highest in task manager but still nothing.
i have done a fresh install a couple weeks ago and have just been enduring this constant crash but it generally occurs after pc has gone to standby/sleep overnight and i see it when i return to the PC in the morning.
PC specs:
Windows 8.1 x64
2x 8 gb Ballistix DDr-1600
ASrock Z87 Pro3
AMD Radeon HD 6800 Series
2x Samsung SSD 120gb 840 EVO
I just got a new laptop (Acer Aspire One 756) and keep having an issue with the internet connection not being able to connect after the computer sleeps or hibernates for a few hours. It usually says identifying network... no internet access. I copied and pasted the trouble shooting that I did below. It still works if I restart or the computer sleeps or hibernates for less than an hour or so. The other computer and devices that use this connection work fine when mine isn't working. I can fix this problem by restarting the router and it works fine again.
It's just annoying to have to restart the router a few times a day. It also only does this with my network at home. I've tried uninstalling and reinstalling the network adapter with the most updated driver, power cycling the router and all the devices, changing the network adapter settings to do not turn this device off to save power, and resetting the Winsock like I've seen on other forum posts. None of these has worked so far. The router is a dlink WBR-1310 and it's pretty old. My wireless network adapter is a Qualcomm Atheros AR5B125.
Issues found:
"WiFi" doesn't have a valid IP configuration
"WiFi" doesn't have a valid IP configuration Not fixed Investigate router or broadband modem issues Failed Reset the "WiFi" adapter Completed
I was just sitting here watching Netflix on my pc with the windows netflix app, and have done countless of times before when all of a sudden the PC restarts itself no error nothing, looked for logs in event viewer nothing but one saying the shutdown was unexpected, I looked for mini dump nothing but turns out my windows 8.1 setup for DMP files nothing there ether, What could have caused this know dump files created at all.
View 8 Replies View RelatedAfter a short period of time and computer not being used. It locks, I have no reason for this happening. I have tried different things but cannot get it to.
View 1 Replies View RelatedI just attached my Micromax canvas smartphone to my windows 8 laptop to transfer some of my pics. I copied the pics and then looked for an appropriate folder in Documents to paste those pics. I found a folder named My Pics which already had some of my pics. I created a new folder inside it and then went back to my phone location. But to my surprise, when I came back there in My Pics I just found that folder empty!! (space 0 bytes)... What has just happened,I've lost my pics forever. I even tried System restore but in vain.
View 3 Replies View RelatedI've just brought a new pc with windows 8 core preinstalled as with all new pc's it has to do all its updates but for some reason on one of them it restarted and booted up in windows 8 pro with media center.I really do not want this and would like to return to windows 8 core without having to copy off all my files or purchasing a new copy of windows 8 as I have just spent a lot of money on this new pc.
View 2 Replies View RelatedI've encountered a sleep-related problem on my tower (desktop). Some time after a long idle (~12-16 hours), my machine just goes to sleep. I require this machine to be up 24/7, so I've tried many things; inevitably, my computer just decides to take a nap. I've even enabled wake-on-lan so I can wake it up remotely when I'm not nearby. Attached are my system specs/info, service culprits (non-microsoft), and attempted fixes.
systeminfo.txt is output from systeminfo
AidaReport.txt is a full summary of my machine
SleepEvents.txt contains the sleep event itself and the events that always seem to follow or precede it.
Running Non-Microsoft Services:
Adobe Acrobat/Flash Player update Services
AMD External Events Utility
Apple Mobile Device
Bonjour Serivce
Evolve Service (Evolve Gaming Client)
FileZilla Server FTP server
Fitbit Connect Service
iPod Service
Mozilla Maintenance Service
OpenVPN Service
Splashtop Remote Service
Splashtop Software Updater
Steam Client Service
VMware Authorization Service
VMware USB Arbitration Service
VMware Workstation Server
Things I've tried:
Disabled all sleep related settings, including hybrid sleep and fast startup. Power options are set to never sleep on all profiles (power plans). I've tried Caffeine (F15 every 59 seconds) and Insomnia (SetThreadExecutionState).
Originally, my computer was going to sleep with the reason Sleep Button pressed, and it looked like it was my keyboard (Razer DeathStalker), so I disabled the hardware sleep button, then the reason changed to Application API (with some delay between the 2 problems).
All windows updates have been applied, including the latest 8.1.1.
Right click context menu opening for no reason.... What is the reason?
View 5 Replies View RelatedMy friend put his Lenovo desktop to sleep, and when he woke it up, it was at one of the initial setup screens that you see when you first turn on a new computer, or first install Windows 8 - the screen that asks you to accept the Express Settings or to customize the setup.
We could not get out of it, and restarting the computer brought it right back there. So I accepted the Express Settings, then it asked me to enter the Microsoft account info, or to create one. He had a local account only, so I kept denying that screen and finally somehow I ended up at a screen that said something like "use my existing account" although it showed no indication that there was any account.
It then said it was installing my Apps (there are no Metro Apps in use on this computer, other than what comes with Win 8). This took about 3 or 4 minutes, then it did some more setup, and when it was done it was (surprisingly) back at his desktop screen, with all his files and desktop icons just like they were before.
After my PC has been shutdown for a while (5 hours?), when I turn it back on again I get a BSOD.
If it is turned off for a couple of hours then I don't, everything is fine.
It normally boots up ok to the windows login wall paper, as soon as I click to select a user to login as it crashes.
A reboot normally cures it and I'm and running.
The messages I've been getting include:
Windows 8.1 64-bit
DRIVER_POWER_STATE_FAILURE
PFN_LIST_CORRUPT
Driver IRQL not less or equal
(I've attached my SF Diagnostics Dump File)....
I have an Acer Iconia W510 PC Tablet and I am talking about this error right here. [URL] ....
Okay, so this started appearing and I got a little worried. Each time it happens, I go through a restart and am just fine. So, I started to think about why it appeared. Then it happened more often. I'd say it pops up for no apparent reason every couple days, sometimes more frequent.
Every day, I do the following:
- Run Disk Cleanup
- Run Defrag
- Do a Manual Full System Scan with Norton Antivirus
I do all of these things and try to never download shady files, but it happens all the time. Sometimes it will be when I'm talking to someone on Skype (Text, not Video), or in an app like One Note or OK Cupid Touch.
It happens so frequently that I feel like there is something I'm missing.
Having a problem with the Regular Maintenance waking the computer (Windows 8 on a Lenovo Q-190) to do its scheduled task as it's supposed to do. Here are the symptoms:
1. If I change the time for Scheduled Maintenance in the Action Center (Change Maintenance Settings), it WILL be reflected properly in the Properties of the Regular Maintenance Task in Task Scheduler.
2. However, if I check the box for "Allow scheduled maintenance to wake up my computer at the scheduled time" in the Action Center (Change Maintenance Settings), it WILL NOT reflect in the Properties of the Regular Maintenance Task in Task Schedular. Specially, I check the box to wake up my computer in the Action Center Maintenance Settings, but the corresponding checkmark is NOT reflected ("Wake the computer to run this task"), in the properties of the actual task in Task Scheduler.
3. I then put the checkmark directly in the Regular Maintenance Task itself ("Wake the computer to run this task"). However, at some point in the future, (not right away; I close and then reopen the task to make sure that it 'sticks'), the checkmark "disappears. Then, the task does not run at night while the computer is asleep, but runs in the morning when I wake the computer for regular use. At that point, the checkmark in the task is gone.
I deleted maintenance tasks in task scheduler (Microsoft>windows>task scheduler) because I didn't want to have automatic maintenance fire up when I'm working, but sadly... some shit got messed up. My computer starts using hdd at 100% if left idle, and then freezes and all kinds of weird crap that I'm almost positive have to do with me deleting maintenance.
which tasks do I need to re-create in task scheduler in order to have auto-maintenance once again. If you could just read to me all the tasks, triggers, and which programs they are running .
I had the idle & regular maintenance tasks disabled but they always re-enabled themselves. In a fit of madness I ended up deleting them but now when I open a folder with videos or images the thumbnails always display in a slow staggered way every time from left to right, If I then exit the folder & go back in they do the same again. It's almost like they are not being cached at all & are having to be redrawn every time.
The only change I have made to my system is remove Comodo firewall & install Private Firewall & delete the idle & regular maintenance tasks.
I have Automatic Scheduled Maintenance set to run at 3:00AM. I get to this setting by going to Control Panel > Action Center > Maintenance > Change maintenance settings. I also have the box for "Allow scheduled maintenance to wake up my computer" checked.
However, I note that if I put my computer to sleep for a few days, when I wake it back up, Automatic Scheduled Maintenance has NOT run. I can tell this because my antivirus definitions are out-of-date and haven't been updated since I put the computer to sleep.
how to figure why it's not waking up for Scheduled Maintenance? Is it possibly a BIOS setting? Do I have to manually add it to Task Scheduler? I'm running Windows 8.1 Update 1, ASRock Z87E-ITX mobo, Intel i7-4770S CPU, Samsung 840 EVO mSATA SSD, 16GB RAM.
I found out how to add a task to the Automatic Maintenance that runs each morning. I use Geekzone's EPG collector to fill in the guide on Media Centre and I though it would be nice for it to run as part of Automatic Maintenance rather than wake the computer up again later to do it's thing.
Here's how:
Create an XML files in notepad and paste this in...
<?xml version="1.0" encoding="UTF-16"?>
<Task version="1.4" xmlns="http://schemas.microsoft.com/windows/2004/02/mit/task">
<RegistrationInfo>
<Date>2013-02-01T19:34:03.9529687</Date>
<Author>johnofe-laptopJohnOfE</Author>
<Description>EPG Loader</Description>
[Code] ....
Save the file then in Task Scheduler, import the XML and it will appear. Edit it from there further if you want.
I got this from exporting a task that runs as part of Automatic Maintenance and edited it to suit.
the thing is, I still don't know how it works! I haven't been able to create a schedules task from scratch that runs as part of Automatic Maintenance.
Other than plagiarising existing tasks to get what I want, how it's really done?
I have what I want, and it works great being able to run all the things I want all at the same time at 3AM each day, as part of Windows' ritual. Even better, if I disable it from waking the computer, everything runs when I'm logged in and Idle. It's fantastic.
I'm using Intel Rapid Start function, so my PC is starting from completely off to fully desktop in less than 10 seconds (no POST, no Boot ). But I must each time remember to stop "automatic maintenance", because if it is running when closing with IRS, then it won't start again. I can find the setting to change the time of running "automatic maintenance", but I want to deactivate it for ever!! I will maintaine my PC myself.
View 9 Replies View RelatedI noticed that automatic maintenance in Win 8 cannot be disabled. I maintain my pc regularly and do not need it. Is there a way to do it or should I let it run?
View 9 Replies View RelatedI have set up scheduled maintenance on my laptop (on Windows 8.1) as:
I have also set up my laptop to go to sleep after an hour of inactivity:
So far, I have found my laptop not asleep everytime I wake up at around 7AM (two times in a row). Here are some "powercfg" outputs:
What should I do?
I'm playing watch dogs which needs 6GB ram on a 4GB ram PC.
I run compact tray meter and one thing I notice is that the ram usage never goes more than 80%. In fact, whenever it loads stuff from the HDD ( I could see HDD usage 100% and stuttering in my game), RAM usage decrease to 77-78%. VRAM is kind of healthy at only 52% of 2GB used.
I want to know why not all 100% of my RAM is used? Hardware reserve is only 145MB.
And why is the minimum system requirements for watch dogs a GTX460? I mean, I got a 645M, I can play it, my friends with a 640 and 630m can play it fine, our GPU temperature is just 80"C even after hours of playing.
I am trying to partition 25 Gigabytes of my hard drive to dual-boot Ubuntu, but when I go to "Shrink Volume" and try to shrink my C: drive, I can only shrink around half a gigabyte. I defragged it and it still won't shrink more than that. It is a 440GB drive and I still have 298GB free.
View 2 Replies View RelatedOnly been running this system for about a week. It says Optimization not available but it also says it ran on C: yesterday.
It didn't say this when I originally installed Windows and ran winsat formal. I just noticed last night that it was no longer available.
SATA controller is in RAID mode for my secondary drive, drivers for the AMD 990 chipset are up to date.
when I set up my windows 8, optimization was available for several days. Now the C drive says optimization not available. it still shows it as an SSD.
View 7 Replies View RelatedMy five year old HP Pavilion crashed with virtually no signs of life, although the 2 320GB drives are only 8 months old, and are spinning when startup is attempted. No messages of any kind on the display; I checked the display and it is good. Bought a new HP, but it has Windows 8.
All my backup data is via Norton Ghost 15/Windows 7 and is intact on a 1 TB external Passport drive. I need to figure out how to retrieve this data.
A suggestion was made to just install the old Win 7 hard drive in place of the Win 8 hard drive in the new computer. New computer can't accommodate both old Win 7 hard drives, so I stuck the C: in, it per normal containing the startup and OS files. The computer would not boot from this drive, and delivered an error message to the effect "No bootable disk or drive has failed."
So the question is would there be anything in the BIOS of the new PC which would make it expect to see Win 8?? why it wouldn't boot from this drive? I realize the drive could be bad, but given the age of the drive, it seems unlikely...
Friend on 100% CPU system to a stand. Resulting in a sharp decrease in system speed.
View 9 Replies View Related