Hardware Drivers :: Dell Studio XPS - Booting From CD Or USB Failure
Mar 5, 2013
I have a Dell Studio XPS, I have just installed an SSD for the boot / system drive and am using Windows 8.
I wanted to make an copy of the SSD for backup. I have tried a number of program which boot from CD or USB but they all start to load and then stop. The software tried is "Mini Tool Partition Wizard", "Driveimage XLM", and others.
I know the CD boot system works ok as that is how I installed Windows 8 to the SSD and the above software all starts to load and then locks up.
I have a Dell Studio XPS 9000 running Windows 7 home premium 64bit and a USB 3 card installed. I want to upgrade it to Windows 8.1. I also have an HP laptop Envy dv6 running Windows 8.1 USB 3 compatible. I also have an Intel SSD 335 Series 240 GB, on which I want the upgrade to be installed, and a USB 3 NexStar caddy.
I imagine the most elegant approach would be to load Windows 8.1 on the SSD via the caddy connected to the HP laptop which is connected to the Internet, and then install the SSD into the Dell Studio XPS 9000.
I see the write-up on how to make a password reset disk on a USB flash memory stick. But is there a way to make a password reset disk on a CD?
WHAT I DID: 1. Inserted a blank CD in the optical drive. 2. Opened control panel and clicked "User Accounts". But in the left panel there is no option "Create a password reset disk". All I see are: Control Panel HomeManage your credentialsManage your file encryption certificatesConfigure advanced user profile propertiesChange my environment variables.
Do I HAVE TO insert a USB stick to see the password reset option? (I don't have a spare USB stick to test with)
I recently updated my Studio 1458 Notebook from 64-bit Windows 7 Ultimate to Windows 8 Pro. It is a 2.4GHz Intel Core i5-520M, 8 GB Shared Dual Channel DDR3 at 1066 MHz RAM, 512 MB ATI Mobility Radeon HD 4530 Video Card, 500 GB SATA @7200 RPM HDD.
Since upgrading, I have had no control over the Sleep function. I have changed all settings I can find on CONTROL PANEL<POWER OPTIONS, and still the system goes to "Sleep Mode" if I do not touch it for a few minutes. It even went to Sleep DURING the Windows 8 installation, which made it take longer than expected.
Upgrading from Windows 8 ProWMC on a Dell Studio 1535 laptop. It ran for a couple of hours and was in the 'a few more things' stage when it decided to fail and roll everything back.
Now that it's back where I started, where do I start looking to try to find out what happened? I'm hoping it put some log files somewhere.
My first guess is that it's third-party drivers, will start by looking at those. There are several things which are old but still were working with Windows 8; I suppose one or more of these might not be compatible?
I have the Dell Studio 1458 and i have Windows 8.1 Enterprise x64, When I try to install the video card which is: ATI Readeon Mobility HD 5400. I got Errors that say "there was an error when trying to install driver" (on devmgmt.msc).
Where can i find the correct drivers this version?
I have a Dell Inspiron One 2330, which had Windows 8 Pre Installed, one fine day it stopped booting windows 8...
No matter, I had the recovery media... I made a full system restore... and nothing... it still does not boot.
Black screen after windows logo.
Dell Diagnostics accused no trouble whatsoever, all the tests performed successfully.
After a lot of tinkering, I managed to go back to Windows 7, the system runs fine, but I am running a trial license of Win 7, as I have not yet bought a license (I actually tried restoring the system using the Dell generated backup disks AND the Windows 8 OEM Disk, provided after those did not work).
What could be preventing Windows 8 from booting, since neither the installation fails, nor the HDD acuses any problem?
I recently purchased a XPS 8700 with Windows 8.1 pre-installed. My only question is, "is it possible to have the same pre-installed OS installed on the same XPS 8700 for the purposes of a multi-boot?"
I have a laptop, dell inspiron rs7720 with windows 8 on it. Once i tried to boot a different operation system from a memory stick, it didn't work, nothing happened. From that day after a first boot(doesn't matter through restart or by shutting it down) I always keep getting a quick dell logo for 1 second and then a black screen. By pressing buttons like Esc-f12 the ~Boot options F12~ appears on the right bottom of the screen. If I press F12 no reaction happens. If i just turn the laptop off by holding a button and turn it on again it boots up properly. Tried to reinstall bios, didn't work, but the bios does work. However boot options doesn't(if you press f12 at the dell logo).
Is there any chance of dualbooting Dell Venue 8 Pro with Windows 8 and Android? I like Windows 8 but would also like to be able to use Android on this awesome tablet.If not dual boot, is there any other way of using Android as virtual machine or something that provides full touch and other sensor's support?
I have had about 5 crashes in the last month. Below are 2 of them from the whocrashed report. I tried googling this issue, but most of what I found is specific to a driver. My whocrashed report does not mention a specific driver. This is a Dell XPS 13 which I bought only about a month ago. Also, I should mention that in Device Manager, there is a yellow exclamation next to "Generic PnP monitor" and when I click properties, under device status it says:
"Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)
{Unable to Load Device Driver} %hs device driver could not be loaded. Error Status was 0x%x"
I do not use an external monitor, so I'm guessing it's referring to my laptop screen. Not sure if this is relevant to the crashes or not.
-------------------------------------------------------------------------------- System Information (local) --------------------------------------------------------------------------------
computer name: WINDOWS-J19V9N3 windows version: Windows 8.1 , 6.2, build: 9200 windows dir: C:windows Hardware: XPS13 9333, Dell Inc., 0GFTRT CPU: GenuineIntel Intel(R) Core(TM) i7-4500U CPU @ 1.80GHz Intel586, level: 6 4 logical processors, active mask: 15 RAM: 8490651648 total VM: 2147352576, free: 1929687040
[Code] ....
3 crash dumps have been found and analyzed. No offending third party drivers have been found. Consider using WhoCrashed Professional which offers more detailed analysis using symbol resolution. Also configuring your system to produce a full memory dump.
One day old Insiron R 5521 of mine has a problem. I get the error -"Recovery , Your PC needs to be repaired. The application or OS couldn't load because a required file is missing or contains errors. Error Code: - 0xc0000225 File:Windowssystem32winload.efi "
I just bought a 16GB kit (8GB x 2). I put both sticks of RAM into my PC and it does not boot, nothing is shown on the monitor, no beeping noise, no error message. I used another PC and got the same thing. After trying out the RAM one stick at a time, I found one of the stick is causing the boot issues. If I used that stick of RAM on any of my 2 PC, it won't boot at all.
Is this RAM not compatible with my PC or is the RAM defective?
First of all.. let me say that this HDD does not have any kind physical damage. It has not been dropped.. nor it has a clicking or beeping sound.
The HDD is SeaGate FreeAgent Go 250 GB. I always watch movies in bulk. So I copy it to my HDD and plug it in the TV and use it. Today when I plugged it in to my PC for watching another set of movies, the copying was not going in a stable manner.. instead the graph showed mountain-like copying.. i.e. first it goes at much speed and then it loses and fall back to 1 or 2 mb/s.. So I thought that a defrag could set things right.
I defragged it and went for a coffee.. After coming back, the defrag was complete but i was unable to open the HDD.. I safely removed it but it said it was in use.. I shut down my PC and unplugged it.. turned on my PC but when I insert my HDD its unreadable.. it shows no percentage of free space.. only just Local Disk F.. ( earlier it used to show FreeAgent GO) I ran chkdsk F: /f /r.. but it showed some error.. I closed it. The log file is attached..
Now whenever I open my HDD, its stops responding.. I know it can be solved..
I sometimes get "Driver Power State Failure" after logging into Windows 8 (not 8.1).
I believe it is my Sierra Wireless 760S Aircard 4G modem causing the issue but I'm not entirely sure, and sometimes it doesn't detect it until I unplug and reconnect the usb cable after booting.
I've just built a new computer that has a 2nd hand HDD as the secondary drive. It was causing messages to appear like "Hard drive failure imminent - do you want to back up the drive". Since I was still setting up everything on the primary drive I disabled the messages by clicking "Do not show these messages again". Now I realise I should enable the message and remove the offending HDD. I'm running windows 8.1.
I own a XPS L702X laptop purchased in 2011. Laptop has driver support from Dell for Win 7 and Win 8. But windows 8 drivers aren't working with windows 8.1 and i don't think Dell is in the mood to provide drivers for a laptop which is already 2+ years old.
So i had to collect drivers by myself. I have already got most of the native drivers from Intel/nVidia/Realtek websites.But not able to find the Quickset software. Currently using the one which was released for windows 8, and it gives error when i open the windows mobility center. And after installing, it doesn't remove the "Unknown Device" icon from device manager like it used to do in windows 8 .
Also need "ST Micro Screen Detection Sensor" driver. If i install the old windows 8 driver, it says incompatible with this version of windows.
i was recently trying to install Microsoft visual studio on my windows 8.1 laptop (dell latitude d620) and for the life of me, i couldn't get it to work. first, i tried to install visual studio c++ express 2010, and it crashed every time i tried to open it (after installing). then, i tried 2012, because i thought it was a prob with OS compatibility. this time, i couldn't even install it before i got an error message saying there was a problem and it closed. after trying to get it to work for some time, i tried the 2013 version. this time, i got farther than i did with 2012, but not as far as 2010 (i didn't install). i would really like for this to work because i just bought a course on Udemy for $10, and i don't want to waste the money. however, if i cant get it to work, i suppose i could put it on my windows 7 desktop.
I am working with windows 8 and I have installed SQL server 2007 and visual studio 2010. Now I want to upgrade these setups to SQL server 2012 and visual studio 2012. what is the advantages of what i want to do and how can i do it easily without corrupting the operating system?
I can't install MVS on my Windows 8.1 due to missing core libraries. I've tried 2010, 2012 and 2013 versions and same error occurs anyway. I have a valid license.
As I am nearing the limits of my C drive, I have been purging applications and moving them to a secondary D drive. One of the uninstalled apps, Microsoft Visual Studio 2012 Pro, opened up space on my drive, but also left about 29 uninstalled programs (and I assume, many unnecessary folders). According to a couple of Google searches, uninstalling these programs, even if done in the correct order, could cause some problems down the line. However, I do want to install this program on my D drive. Would installing visual studio on my d drive cause any problems (as there are 29 programs related to visual studio on the C drive)? I am running windows 8.1 on a Gigabyte p34g.
I was able to install Win 8.1 on my laptop (Dell Studio XP 1340).
Resolved here: Windows 8.1 RTM installation fails on Dell XPS 1340
I had to disable Bluetooth in BIOS to be able to install the system.
Now with the system up and running I would like to use Bluetooth. The device is not listed in Device Manager and no driver was installed. When I enable it in BIOS system will not start, it crashes with error [URL]....
I found the driver which should be installed. So with Bluetooth still disabled I tried to install it. It's in exe so I can't really get the driver files. The SW asks for Bluetooth to be activated by a switch. I have a button which normally turns Wifi+Bluetooth on/of .. but with BT disabled it does not work, obviously. And the only option is 'Cancel' : [URL] ....
