Win 8.1 has added a piece in brackets to files on my new PC. Now none of my slide shows work because each jpg has this bracketed info in the file name. I have tried overwriting the files with originals from a backup but these too are changed. Can I stop this happening? Is there a bit of code to delete the bracketed part of the many thousands of files affected?
I have loads of Nero nvc files that I can no longer open because of this name change.
I have Windows 8.1 and just noticed this behaviour after reinstalling Adobe Acrobat Pro XI. Say I have a document called A.pdf. I want to rename the file so I right-click, click rename, and type B.pdf. The file still appears in the folder as A.pdf and when I double-click it to open it, I get an error from Acrobat: "There was an error opening this document."
This only happens with PDFs, not with DOCs or TXTs.
Is it possible to sort a folder's contents with both File names and Sub-Folder names intermixed? I have projects in sub-folders, and 'support' files like this:
I have a directory in which I have a large number of genealogical records, 756 to be exact. The files are numbered FIN_1881_001_001 to FIN_1881_001_756.
Due to an error when saving these files, I need to change these 756 file numbers to FIN_1891_001_001 to FIN_1891_001_756.
Is there any easy way of doing this without having to change each file name individually.
Just installed 8.1 and the "This PC" section of the navigation pane in file explorer has changed. In addition to listing the disk drives, it now lists six folders. how to remove the folders from the drive list?
In Windows 8 Explorer ( have they changed the name of it ) you know, the file manager. In the left side, the top of the "tree" you have Desktop, Downloads, etc ....
I created a folder when the pc was new called Jack's Stuff. Later, much later, I decided I didn't like the name with "stuff" ... so I changed it to Jack's Place. Instead of the typical My(fill in the blank). So it changed there. But following through the tree to it's origin down finding it through USERS>Jack ... etc. It's still in all cases called Jack's Stuff. Now this is not typical for XP and before that. I jumped right from XP to Windows 8.
Why didn't the name change everywhere and not just at the top of the tree? Is there a way to insure the name changes everywhere if you rename a folder. Oh, I tried going through USERS>Jack and changing it but I forget right now but it didn't work out completely kosher.
How to change names of the folders in navigation pane in Windows 8.1 x64 under This PC category? I want to change the names which are shown in File Explorer, not actually change locations.
When two or more documents of a program (microsoft word, for example) are used then the word icons are grouped in the task bar. When the mouse pointer is put over the word icon then a little window appears with the document names. This is useful but sometimes is not fast enough.
Is there possible to display the word document title names as extended icon names. Then it wouldn't be necessary to put the mouse pointer over the icons to choose the desired word document because the document names would be displayed in a task bar like two separated icons.
I installed 2003 outlook and word (outlook editor) on my brand new Win 8.1 netbook and when typing the "TO" and "CC" lines the names show up but when pressing enter they will not be accepted. I have to enter the first couple of letters of the names and then press the "check names" icon and go through the list even though the one I wanted was the one that showed up on the auto fill line singularly.
I know the auto fill does not go to the outlook contact book but rather remembers the names as they are "sent".
I have used outlook for years on both Win XP and Win 7 (various 32+64, Pro, Ultimate) and now with Win 8 it will NOT work the same way. My brother has the identical netbook and is running Outlook 2007 and it performs the same way - will not allow enter to complete the autofill. Whatsup over there at MS?
My program and features list is emptied by malware but all programs are working normally. how do I re-entry the deleted (not uninstalled) programs' name in the control panel program and features?
I have a bunch of folders in the File Explorer that I would like to copy the names to a word or excel document instead of retyping them individually. Is there a way to do that?
On my windows 8.1 PC whenever I plug in any USB pen drive the thumbnail for the device is always an image of a Sandisk Cruzer Titanium as is the identity when I go to the safely remove hardware toolbar.
The Sandisk probably was the first pen drive I plugged into the machine when new but surely it should be picking up details of subsequent devices or at the very least showing generic details.
I keep finding files with names such as 3977C900 or similar on my system. The file type is called "File" and contains 0 kb. Why these are being created and how I can stop it ?
This seems bad, and I'm concerned something is wrong with the way the OS is behaving. Can't delete the many too-long profile directories in backups. Is this symptomatic of some future failure?
I bought a Toshiba laptop that came with pre-installed Windows 8. I went into the "Bios" and switched from UEFI to CSM, Now my laptop just doesn't work. I am on a public computer posting this because mine will just not boot at all. It won't even show the boot logo, and I cannot get back into the Bios to switch it back to UEFI. I am not sure what information I could add on to here to be more clear other than I screwed up bad. The laptop didn't come with a disk, and I tried to hold 0 while powering up the laptop hoping that it would reset to factory settings, but no luck there either.
I have Windows 8 Pro (64bit) and I have 1,904 fonts installed... It was working fine until one day some of the Windows fonts have been changed to different ones. Is there any way to reset the fonts installed? Since this is getting very annoying
Here is a screenshot taken from Office 2013 Professional Plus
I have had windows update set to check for updates and notify me so I can choose when, or in some cases if, to install them. This evening, I checked and the option had been changed to automatically install all updates.
When I was installing an arabic keyboard for fun, I managed to set the entire system language to it, instead of just the keyboard layout. Using the thing on the task bar doesn't work.
After last week' update I started seeing a lot of "The start type of the Windows Modules Installer service was changed from auto start to demand start." Even ID 7040 in my system event log.
It triggers when laptop is idle (win 8 pro 64 bit), the CPU usage goes to 30% and higher and the event log gets pounded with the above messages.
Just starting using Windows 8, changed computer name and now when I start up I can not log in. If I open arrow to left of log in picture there are two pictures, one I can log in with and the other no.
I have an HP laptop that came with Windows 8 installed. One of the automatic updates ran and changed pathways to my files. If I click on Libraries, my documents, music, and pics that were there before the upgrade are not there now. I have to click c:/users/myusername/ then whichever folder I'm looking for. Is there a way to get that back so all my files go to one set of library folders instead of having a new set?
The update almost crashed the whole laptop. Also corrupted my save points and had to do a new restore point once the system was finally brought back up. I'm tracking down how to fix my app store tile now. The update also deleted all my tiles I had on my start screen.
The only thing that has changed is that I upgraded my OS recently.
I have an 2.4 GHz Wireless Laser Mobile Mouse. Originally after the upgrade, the left button caused right clicks and vice versa. I found a workaround by changing the Windows 8 settings to "Right Primary Button" while in the control panel, the device is configured for the left hand. If I select "Left..." and right respectively, I get the reverse. The scroll wheel also does nothing when clicked. Sometimes when I read articles I click it so I can move my mouse up and down to scroll the page without pushing any keys.
I have tried uninstalling and reinstalling the mouse driver and HID driver with no luck.
I have a custom built system running Windows 8. I recently changed the Sata port config, changing one of my drives to another port that was supposed to be for a case esata port. After this, my hard drives would not work together and the computer would randomly crash when I try to access My Computer or anything that makes the hard drives run. It's really hard to use as my programs/files are spread across these three drives.
I'm playing a browser-based game where we use signature-photos, and some people including me like to go a little nuts here and make photos with transparent backgrounds, the only issue is that transparent backgrounds have a lot larger files than if you just change the background-color of the photo to whatever the background of the website is, which in this case is #111111. Anyway, this worked perfectly on Windows 7, but since I switched to Windows 8.1, the background colors of the photos has changed, either that or the colors themself has changed. When I printscreen the background of the website, it's still #111111 while as the color of the photos are #080808, can this be related?
I have talked to a lot of players on this game who runs Windows 8 who doesn't have this issue.
Here's a printscreen of what I'm referring to: Screenshot by Lightshot
i've been using windows 8.1 for a little time in my new Sony notebook. First, i used windows 8 and had no problems, my keyboard layout was the correct one (Spanish - Latin America, 'cause i'm from Argentina). But after an upgrade to windows 8.1, the default layout was set to Traditional Spanish wich does not suit the layout I see on my keyboard, signs are misplaced. I went to the control panel and under the idioms settings i set Latin American layout to my keyboard, but even with the correct configuration (checked with the layout image that is shown in the configuration menu), signs like ` and @ are still misplaced. What can I do?
I changed my username following the following guide ( microsoft account - How to rename user folder in Windows 8? - Super User ). Everything has worked fine so far apart for the the desktop version of Windows Update. My knowledge is pretty low about this things but for me it's weird that I can access the metro version of the Updater but I cannot access the desktop version. I receive this error -> View image: 2014 05 05 11 02 36 C Users user App Data Local
I've mistakenly changed my guest account to administrator and my previous administrator account to local account in Windows 8. Now I'm unable to remove the guest account as administrator or switch it off.
I have only one user account which has now become local account.
I noticed recently there're changes to my shortcut icon. i am sure this is nothing big, but may i know what are the possibility of this sudden changes? (like corrupted windows file or etc)