I have a 4 day old hp g7 with windows 8. Everything worked fine until an update happened. When it restarted it said boot image did not authenticate. After futile attempts to correct I did a reset. It took like 6-7 hours to FINALLY complete and when it did the logon screen was up but it said other user. I've tried signing in with the original username and password and nothing. I then tried to sign in with an e-mail account and even though it is a valid microsoft account and password again nothing.
So I've some folders in my Desktop that I want to share with all the hosts in my network, so what i did was to create a new users and set all those folders only to read mode and, everytime I wanted to access the folders on those machines I simply access those folders via that user (in Windows hosts I just enter the network path like ip_addressfolder , windows then asks for the network password, I authenticate with that user and I have access to those folders.
The thing is that in my Surface RT (Windows RT -ARM), every time I try to access those folders via the method above (ip_addressfolder), I do see the folders, but when I double click on one of them in order to have access, instead of letting me authenticate, it simply returns the following error: Windows Cannot Access ip_addressfolder
Why is this so? Why doesn't Windows allow me to authenticate? Is this a limitation of the RT platform?
For the first time, I decided to back up my C: Drive using the Windows back up image tool. I selected my internal D: drive as the storage target. The recovery tool ran, and ran, and ran. The "back up" portion of the event had finished, but the "create shadow copy" went on for a good hour before I aborted the activity. The tool window never closed. After a while I hit the "x" button, but the window remained open. I clicked the shutdown icon and selected "restart", the restarting screen came up and remained for another hour or so before I cut the power to my pc.
Immediate problem: Now, my PC won't boot up. It gets to the windows 8 icon and the spinning dots never stop circling each other.
Attempted remedies: If I disconnect the SATA cable to my D: drive, the pc boots up. I can then connect the D: drive as an external and it will load. I deleted the back up image folder and the .dat file that was created on it. These are the only 2 files I could see created around the time of the back up, with "show hidden files" enabled. However if I reconnect the drive as an internal, my PC still won't boot. I have tried reverting to an older system restore point, but this has not affected whatever is going on during bootup.
What has Windows Back Up image Tool changed that won't allow my D: drive to be connected during boot? How can I remedy this?
Probably unnecessary background info: Last week I decided to clean up my computer, do a fresh install of windows and create a back up so that I *hopefully* never have to clean from scratch again. I had to start by installing windows 7 from DVD. I kept nothing on my 60gb SSD C: drive. Fresh install. Run windows update, then upgrade to Window 8 via a code I got from the "buy win 7 computer and purchase win 8 upgrade for $17" promotion when win 8 first came out. I ran win update again, which bricked my pc with a corrupt update sending it into a continuous loop of "update failed, reverting to old settings" over and over. I reinstalled Win 8 and tried selecting different updates. After 8 or so selections, the list of 72 "required" updates disappeared, and I could finally upgrade to 8.1 After 3 days of these install shenanigans, and finally getting my personal necessity programs installed (chrome, photoshop, etc) I was ready to create a windows back up image. This brings me to the current scenario.
my D: drive is a 1TB MyBook HDD that I took apart and plugged in as an internal. 16 gb of ram, 3.8- 6core AMD processor.
So, previously I had Windows 8 and a system image of that drive. I want to dual-boot it with Win7, so I replace my Win8 with Win7, and reinstall Win8 on another partition. Can I restore my Win8 with the previous system image, or will it affect my Win7?
Windows 8.1 64 bit pc48 GB RamIntel i7 - 3960X CPUBoxxTech ComputerDrive C: SSD - 446 GB
When I first got my new personal computer in January, I created a System Image using Microsoft's utility. I typically use Acronis for my backups, but after major changes, I use both Microsoft and Acronis.
Now, I am attempting to complete a System Image Backup using Microsoft's utility so that I can fix my SecureBoot concern, knowing that I have a safety net in place. Unfortunately, I am unable to complete a backup. BoxxTech suggests that I use Microsoft's utility.
I begin with the File History in the Control Panel as shown below. Note, that I have plenty of room on my FreeAgent F Drive (standalone USB drive). Yet, Microsoft's utility believes otherwise.
Only the three items that shown to be selected are selected. In other words, there are no other drives or partitions off-screen that are selected.
Thinking that it might be a problem with my external USB hard drive, I look at using one of my internal drives, T.
I get the same error message as shown earlier.
why I am unable to back-up my personal computer using Windows 8.1?
On my friend's Dell Inspiron laptop, Windows 8 will not boot. I want to boot to the repair disk to restore an image I had created. F12 on boot does not show the DVD drive as an option. I went into Setup/Boot and disabled Secure Boot, still did not show the DVD as a boot option. I went back to Setup and selected Boot List Option>Legacy. Now it shows the DVD drive as an option to boot. I booted the repair dis, went through all the dialogs to select the image I had created, but when it goes to restore it it says it cannot because the image was made in UEFI, and it is now set for BIOS.
I went back into Setup/Boot and I see that the option Load Legacy Option ROM is now Enabled, it did it on its own. As a test I set it back to the defaults and re did it as above, and again it automatically changes Load Legacy Option ROM, which I assume is what is creating the problem.
So my question is what do I need to do to boot from the Windows Repair Disk?
I've been dual-booting Windows 8 Pro and Windows 7 Ultimate, but a while back my Windows 8 kind of went "South" and wouldn't boot at all (I got an error message that a device was "not attached"). I have a recent system image on an external USB hard drive, but when I boot to "system recovery" using my repair disk it can't seem to find my USB drive at all.
The tutorials here mention installing a SATA driver to access disks that are not recognized, but this doesn't seem to be the case.
I have problem mounting .iso images in Windows 8 Pro.
The error message I was getting was this:
and in powershell I got this:
Essentially the problem is that windows .iso mounting does not like 'sparse' files. I had used Acronis backup to backup my original .iso files and this DOES use sparse files. You can check if a file is 'sparsed' by looking at the files details in properties. The 'P' in the attributes represents a sparse file. See the screenshot below.
The result? When I restored my .iso images I could no longer mount them.
The simplest solution I have found is to just copy the .iso to a new file - this seems to create the new file without the sparse flag set.
I just got a refurbished ASUS K75DE laptop, and it came with Windows 8 on it. I am wanting to run a dual boot with Win7, so I disabled fast-boot just fine, and went into the UEFI BIOS and disabled the secure boot.
While I was there, I did like I have always done and set a BIOS boot-up password. I then proceed to boot to my Win7 installer USB Flash drive, but I was running low on battery power so I aborted the install and shut the computer down to try again later.
Now however when I get into BIOS to select boot priority, all options are grayed out except for system time and a few other non-essentials. At the bottom of the first BIOS screen it says "User Level : User" and I can't seem to find a way to reverse this issue. So now I'm stuck, can't boot to anything but the HDD because it is first by default.
First, some context: I have a Dell Inspiron 15R SE that came with Windows 8.
I've managed to get a working dual-boot system with Ubuntu 12.10. I can't remember exactly how I done that, but I remember that I had to disable secure boot. I think that the boot configuration those days was:
Secure boot: DisabledLoad legacy option rom: EnabledBoot list option: Legacy
This "configuration" worked perfectly for 6-7 months.
Then, one day (last week, can't remember the exact day), when I was using Windows 8 the computer crashed. I hard-rebooted and got this screen:
After executed boot-repair from a Ubuntu LiveCD dozens of times I've decided to eliminate Ubuntu temporarily and focus to get a system with Windows 8 working nice.
Then I used my recovery DVDs to recover the system. Yup, Windows has booted. But when I restarted first time I got the same error. Then I, digging a solution, pressed F12 after a reboot and got here:
The highlighted option allows me to boot into Windows 8. So I went to boot options (F2) and changed the following configuration:
Load legacy option rom: DisabledBoot list option: UEFI
Now I can boot directly to Windows without need to press F12.
But my objective isn't complete. I want to erase all Ubuntu entries from the seconds image and restore the legacy boot from the first imagem (because they worked before).
I did two things:
I erased all partitions related to Ubuntu (root partition and home partition).I created a Windows recovery disk (not a system recovery disk).
I used the recovery disk to run the automatic recovery procedure (I forgot the exactly name). I've runned it at least 10 times with no success. Then I went to command prompt to try the famous triad: bootrec /fixmbr, bootrec /fixboot and bootrec /rebuildbcd. Still, no solution.
After creating a UEFI bootable USB thumb drive with Rufus (using Windows 8.1 Enterprise ISO x64), for a Dell Optiplex 3010 (configured as UEFI only, no CSM, latest firmware version, Windows 8 installed), I didn't see a USB boot option, so I tried to add one manually. Unfortunately I erased the existing boot option (boot manager) by mistake. Although there were two boot options for PXE booting, the machine will not start anymore, even when there is an active WDS server on the network.
I also see Led's 2 and 3 lighting up, meaning according to the manual 'hardware ok but bios possibly damaged/corrupt'.
I understand I cannot start the machine from a bios boot disk because of GPT partitioning, and the UEFI USB boot disk I made might be corrupt (as it didn't show up as a boot option), however I don't understand why it won't boot from the PXE network card, as these boot options are still there.
Can I (correctly) convert my current 8.1 (retail) into VHDX and boot from it using the same 8.1 boot loader or not?
I honestly don't know if I would be running two instances. Would it work if I deleted the C:/ partition and booted the VHD from another disk or partition? Would that be OK? Seems to me it would be two instances but I don't know.
I'm not interested in VMware or VirtualBox - just Hyper-V or some similar bare metal solution. Hyper-V server I could not make work really - it is not what it is designed for - I want wifi, bluetooth etc. Windows server would work but I can not afford it.
I have installed Blue 8.1 on a separate drive in my system along side 8.0. When I restart the 8.0 boots unless I manually select the 8.1 drive in bios. How can I alter the Boot menu to add the option to boot from either OS?
Late last Fall I bought a new Desktop, an HP H81414, with Windows 8 installed with the intention of installing Windows 7 on an SSD. I migrated Window 8 to an SSD, removed that from the system, installed new SSD and put Windows 7 on it. Both worked fine. I wound up with 2 SSD's. capable of running on the EFI BIOS machine with Secure Boot turned off. I later bought a new laptop with Windows 8. I found the Win 8 with Classic Shell to be very acceptable.
What I would like to do now ,if possible, is to mount both SSD's in the HP case and switch to either one of them at boot.
After re-boot a message shows Prepairing Auto Repair Diagnosing PC
PC Did Not Start correctly either with 2 options - Restart and trying any of the Advanced Options
Restart option did nothing but restart this cycle of BSOD, etc. Advanced options to troubleshoot (Refresh, Reset, System Repair, Command Prompt are not available due to the following message:" You need to sign in as an administrator to continue, but there aren't any administrator accounts on this PC"
No system recovery disks or Windows 8 Installation media available.
Earlier, about an hour ago, I left to go job searching, and left my computer in hibernate mode so I could bring it back up as soon as I got back. When I tapped keys on the keyboard, the computer powered up as usual, but it brought up the BSoD, stating it was missing files.
Prior to receiving this error, everything was working fine. I even set it to hibernate mode during the night, and it powered on this morning without any problems. I dunno if it's the multimedia keyboard I'm using or what that caused it.
I don't have an installation disc (since I bought it from Fry's Electronics about a year ago with 8 pre-installed), and neither do I have a recovery disc (since I didn't know how to make one.
Computer info: Windows 8 x64 Manufacturer: ASUS
how to fix the missing boot files, and how to do it without causing any data loss from either of my hard drives.
Windows 8.1 failing to boot when any usb storage drive is plugged in during boot. My only solution is to unplug everything each boot unless I use my KVM switch which does not support usb 3.0.
Just like the title, how do I create a system image on windows 8.1? I have installed Windows 8.1 and have all my settings and programs just how I like it but I cant see how to create a system image.
I have two desktop PCs, both of which are 5-7 year old Intel Core 2 Duo-based with 2-4GB of RAM.
I performed a clean install of Win 8.1 Pro onto the first partition on a freshly cleaned disk and all went well. Booted up and ran MS Update to get the whole system up to date. Then installed all of my apps. Then I used Acronis TrueImage to create an image backup of the Windows/App partition.
Then rather than going through the entire process on my second PC, I simply partitioned the drive in an identical manner to the first PC then restored the image backup from the other PC onto the second system. Then I rebooted the system and it came up without any issues. I ran MS Update and it downloaded and installed a couple of drivers (GFX, audio, etc) since the second system was slightly different hardware-wise. The only thing I changed on the second system was to give the PC a different name and also change the default user account name, to avoid networking conflicts.
That was a couple of weeks ago. I've been running both systems (seemingly) without any problems. I have two Win 8 licenses, but only used the first. I haven't been nagged or warned about the same licensing key when running essentially the same system on two different machines.
Aside from the obviously licensing issue, are there likely to be any other problems that may crop up?
I'm not 100% sure on how to make backups of my computer, and which programs are good etc. Also will it just backup the operating system itself, or all my programs and setting also?
I have got a new lap, it has pre installed Windows 8,and for recovery of warranty, if something goes wrong, I want to make an ISO image for burn it in dvd. I have read that it will be around 4gb of the dvd...
Currently I have win 7 Vaio. I'm buying the x carbon Lenovo touchscreen which had win 8. I love the set up I have on my Vaio system image. Can I use it on my win 8 x carbon Lenovo when it arrives?
I can get it back to maximized but cannot get reduced image to show. It just vanished off to the left of my desktop. How to get a reduced image back once it does this?
My Dell Inspiron 660 is 2 months old. It came with Windows 8 preinstalled. My problem: I am trying to change the boot order so I can boot from CD ROM as a first option. I have tried using the "F" keys on boot, but it just ignores me and goes on to boot up. I have also tried the "Advanced Options > UEFI Firmware Settings" in "Change PC Settings" and got the same results. I spent some time on the phone with a Dell tech. After trying all the things I had already tried, he and his supervisor decided I must have a bad Motherboard. Does this sound right? Is there any way to repair this problem?
I had windows 7 running on my computer. When windows 8 came out I used a second harddrive as the windows 8 installation drive. Windows 8 automatically setup a dual boot system where every time I started the computer it took me a windows screen where I could select either windows 7 or windows 8. This has been going on since Windows 8 was released.
I decided it was getting old so I decided it was time to remove the old windows 7 harddrive. I tried doing it inside the windows 8 dual boot screen but could not find an option. So I decided to reformat the windows 7 harddrive. I did this in command prompt mode. After doing so when my computer restarted it said it could not find any harddrive to boot. Windows 8 is installed on the other harddrive, the one that was not reformatted. So how do I get it to start using that harddrive as the boot drive? I checked my bios and even physically disconnected the old HD that had windows 7 on it, but none of that seemed to work even though the Windows 8 HD is definitely in the boot order in the bios.
