Boot Camp Installation Of Windows 8 System Builder DVD
Nov 3, 2012
I was FORCED to install Windows 8 to my IMac 24 inch running Mountain Lion OS via Parallels 8 for the following reason. I receive an error message stating that some files cannot be moved and that I must create a single partition formatted Mac OS X Journal Extended. In short. the Windows 8 partition could not be created. The problem is, my drive is ALREADY a single partition in the aforementioned format. I succeeded in installing Windows 8 on my other IMac via Boot Camp with no problems. The only difference between the two IMacs is the former runs the Mountain Lion OS while the latter runs the Lion OS. I like Windows 8, however, there is significant performance degradation when running Windows 8 within Parallels.
can i upgrade my laptop from windows 8 to windows 8.1 using a system builder iso?
my VAIO shipped with pre-installed windows 8 on it and no serial stick, so i extracted the serial from BIOS, it is a Core edition of windows 8 x64,(don't know if i got single language or not!) and found someone that shared a genuine untouched iso of windows 8.1 non-PRO OEM x64 for system builders,
so if i use it to upgrade from 8 to 8.1 does it accept my serial after the installation assuming i enter the generic serial in the installation? and does it differ from my own edition of windows and do i lose anything or any info will change on the laptop using this upgrade method?
Been running this system since 2010 win7 and upgraded to win 8.
When I switched over to win 8 I also bought an ssd drive (C) and it seemed to be working fine ever since.
I recently bought a couple 3TB drives and wanted to replace the old HDD (F), installed the drives, transferred all data off F and then shut down the pc. I took F out of the pc and it won't boot.
Going from loads of tutorials on here I found that F was listed as active and a system drive.
Any attempts at making it inactive and activating C resulted in nothing. I used my startup repair disc but there was no OS listed to repair??
Whenever C is active and F inactive, I've no options at all with startup repair.
I reinstalled windows 8.1 on my Samsung NP530U3C-A10EE. And now the problem this that I can't boot it without usb stick that contains windows installation files. I can boot up windows and remove the usb stick evertything is working perfectly, but if I try to boot up win without usb, it gives error "Operating system not found. Press CTRL+ALT+DEL to restart". VOLUME C: is one where windows are installed (SSD), System Reserved is the system partition that windows create automaticaly (SSD), volumes D: and F: are my hdd volumes D: is empty & F: is stored with my personal files (photos, music etc.)
I have a Windows 8.1 Update 1 ISO and would like to use it to perform a clean install on a system which supports UEFI Secure Boot but has no optical drive. What would be the best way to approach this?
WIMBoot would be nice to have as well, if there's a way to do it without making things too complicated.
I built a large desktop system a few years back and it's been upgraded with various bits and pieces including an SSD boot drive. I'm looking at putting together a much smaller system in a Shuttle XH61V and I want to use my existing 2.5" SSD. Can I just put the SSD in and clean install Win 8 from the original system builder disk I bought or will something go wrong because there's already an installation on the drive?
While I was messing around with my laptop, I decided to add on a fourth operating system, Arch Linux. I suppose I was pushing my luck a bit . Anyways, during the installation, I accidentally deleted the EFI system partition from my laptop, which contained the Windows Boot Manager and necessary files to boot. Great. I only made things worse by trying to troubleshoot, and broke grub as well.
I have a Windows 8 repair disk I made using the Windows 8 built in utility, but it does not boot: the computer turns on, and just hangs at the Toshiba splash screen.
I also can obviously not access the Toshiba recovery partitions, as they are booted into just like Windows itself.
I found a bootx64.efi file on one of my system's recovery partitions (Toshiba seems to have some really complex system going on) and placed it in EFIootootx64.efi. According to this site, FGA: The EFI boot process., I need to place the bkpbootmgfw.efi (on my system, that was what it was called, but I suspect boot-repair (ubuntu tool) messed something up when I was first setting up grub and the ESP and the bkp stands for backup) back onto the EFI System Partition.
Where to look for in the various Windows Imaging Format .wim and .swm files I have laying around my recovery partition(s) in order to extract the necessary EFI files. Any Windows Repair iso that works.
I got this msg tryng to refresh my pc . because my vaio gate app wasnt working right . so after the restar i just got the blue screen with this error the boot configutating data file dosent have valid infomation of an operating system.
I have a windows 8 laptop and today the sound just stopped working. The windows audio service will not enable and everytime i try to enable it fails due to a duplicate in Windows Audio Endpoint Builder.
Now tricky part is i cant open control panel as it doesn't load, i tried reinstalling windows 8 but it also not load. This all was working perfectly just earlier today. I have no sound, just an x by the sound.
I've had Win 7 Pro on my laptop for over a year. I installed a 2nd hard drive to it recently and today I installed Windows 8 Pro on the 2nd hard drive. It's been a roller coaster of good & bad luck.
The first install went fine, until I tried to install the Windows 8.1 upgrade from the Windows store, then things went bad and I had to go into Windows 7 and eventually delete the Windows 8 volume and change it from MBR to GPT because of UEFI (no secure boot enabled). What a stretch of error messages telling me I can't install Windows 8 on the blank hard drive because it was or wasn't MBR or GPT, or the automagically made partitions weren't in the right order.
After spending over 7 hours twice in a row installing Windows 8, I finally find out that there's no boot option for Windows 7 anymore.
The only clue I have is to use a Windows 7 repair disk and use diskpart.exe and make the Win 7 drive "active" but that's a little foreign to me at this point.
I'm looking in Computer Management / Disk Management from within Windows 8.
Disk 0: SYSTEM D: 438 MB NTFS (lengthened from 199 MB with EaseUS because Acronis 2014 thought it too small while crashing), Healthy (Active, Primary Partition); Win 7 E: 930.98 GB NTFS Healthy (Primary Partition); HP_TOOLS F: 102 MB FAT 32 Healthy (Primary Partition)
After creating a UEFI bootable USB thumb drive with Rufus (using Windows 8.1 Enterprise ISO x64), for a Dell Optiplex 3010 (configured as UEFI only, no CSM, latest firmware version, Windows 8 installed), I didn't see a USB boot option, so I tried to add one manually. Unfortunately I erased the existing boot option (boot manager) by mistake. Although there were two boot options for PXE booting, the machine will not start anymore, even when there is an active WDS server on the network.
I also see Led's 2 and 3 lighting up, meaning according to the manual 'hardware ok but bios possibly damaged/corrupt'.
I understand I cannot start the machine from a bios boot disk because of GPT partitioning, and the UEFI USB boot disk I made might be corrupt (as it didn't show up as a boot option), however I don't understand why it won't boot from the PXE network card, as these boot options are still there.
First, some context: I have a Dell Inspiron 15R SE that came with Windows 8.
I've managed to get a working dual-boot system with Ubuntu 12.10. I can't remember exactly how I done that, but I remember that I had to disable secure boot. I think that the boot configuration those days was:
Secure boot: DisabledLoad legacy option rom: EnabledBoot list option: Legacy
This "configuration" worked perfectly for 6-7 months.
Then, one day (last week, can't remember the exact day), when I was using Windows 8 the computer crashed. I hard-rebooted and got this screen:
After executed boot-repair from a Ubuntu LiveCD dozens of times I've decided to eliminate Ubuntu temporarily and focus to get a system with Windows 8 working nice.
Then I used my recovery DVDs to recover the system. Yup, Windows has booted. But when I restarted first time I got the same error. Then I, digging a solution, pressed F12 after a reboot and got here:
The highlighted option allows me to boot into Windows 8. So I went to boot options (F2) and changed the following configuration:
Load legacy option rom: DisabledBoot list option: UEFI
Now I can boot directly to Windows without need to press F12.
But my objective isn't complete. I want to erase all Ubuntu entries from the seconds image and restore the legacy boot from the first imagem (because they worked before).
I did two things:
I erased all partitions related to Ubuntu (root partition and home partition).I created a Windows recovery disk (not a system recovery disk).
I used the recovery disk to run the automatic recovery procedure (I forgot the exactly name). I've runned it at least 10 times with no success. Then I went to command prompt to try the famous triad: bootrec /fixmbr, bootrec /fixboot and bootrec /rebuildbcd. Still, no solution.
I have installed Blue 8.1 on a separate drive in my system along side 8.0. When I restart the 8.0 boots unless I manually select the 8.1 drive in bios. How can I alter the Boot menu to add the option to boot from either OS?
Late last Fall I bought a new Desktop, an HP H81414, with Windows 8 installed with the intention of installing Windows 7 on an SSD. I migrated Window 8 to an SSD, removed that from the system, installed new SSD and put Windows 7 on it. Both worked fine. I wound up with 2 SSD's. capable of running on the EFI BIOS machine with Secure Boot turned off. I later bought a new laptop with Windows 8. I found the Win 8 with Classic Shell to be very acceptable.
What I would like to do now ,if possible, is to mount both SSD's in the HP case and switch to either one of them at boot.
which partition holds Windows 8 on my Dual Boot 7/8 system. I want to delete Windows 8 64 bit and reinstall Windows 8 32 bit, then update to Windows 8.1. I'm doing this because the system's old enough that 64 bit 8.1 won't install but maybe 32 bit will. I won't know unless I try.
I need to figure out which partition Windows 8 is on so I can format the drive and reinstall.
I'm trying to recreate win 8.1 pro system reserved partition on my ssd. Initially I installed windows on my ssd (c: ) and windows created the sysres partition on my unformatted hd (without telling me anything). After some trouble I managed to be able to boot from ssd directly without going through the sysres partition on the hd. Now if possible I'd like to recreate the sysres on the ssd (by disconnecting my hd so that windows has no other options than creating this on the ssd). If a try a system refresh it tells me it would wipe away all my user installed apps.
I had a problem where I was running UEFI with secure boot disabled and dual booting with Linux Mint which is UEFI compliant. Mint had installed Grub, Mint's boot manager but I don't like Grub so i installed rEFInd. Unlike Grub rEFInd has support for UEFI and should have worked better as a boot manager. But it gave me problems too. So I had Grub and rEFInd both installed. I could boot to both Mint and Windows but the boot managers, both Grub or rEFInd, would not show at startup like they are supposed to.
I had to boot the PC, then hit Escape getting into my options menu built into the system, hit F9 to get a list of boot options where i could then choose to boot from hard drive, cd rom, usb etc. rEFInd was in this list. Only after choosing rEFInd from here, was I able to open rEFInd and choose Windows or Mint. This is way too many steps to boot into an OS, so i thought i'd try to use the system repair disk to repair my master boot record or the EFI data that the system uses at boot under UEFI. I forgot that i had to run some additional commands under command prompt and just ran automatic repair from Advanced instead.
At this time Windows had no trouble working at all with secure boot enabled if I really needed windows to use secure boot.
It said it found but could not fix the errors. Suddenly, Windows would not boot even with secure boot enabled. I reran the tool 3 times and it didn't work so i wiped the drive and reinstalled Windows from a clean state. I really did not have errors on the system to begin with accept that the system was trying to access my boot managers in an odd manner.. although i could get everything to work.
The automatic repair option should not have made things worse, even breaking my secure boot but it did.
My point of this is to show that the repair disk tools and how they play with the EFI boot tools is buggy and it can break your system even if there is nothing wrong with Windows and it's ability to boot under secure boot. Don't trust the Repair Disk tool folks. Don't trust UEFI. Don't trust Secure Boot. Be smart. Install a clean system under Legacy Bios mode with UEFI and secure boot disabled.
I am unable to boot my system as it is not moving forward after the windows start up screen. Not even that i am unable to repair or reinstall windows. Even the recovery DVD is not working.
I had windows 7 running on my computer. When windows 8 came out I used a second harddrive as the windows 8 installation drive. Windows 8 automatically setup a dual boot system where every time I started the computer it took me a windows screen where I could select either windows 7 or windows 8. This has been going on since Windows 8 was released.
I decided it was getting old so I decided it was time to remove the old windows 7 harddrive. I tried doing it inside the windows 8 dual boot screen but could not find an option. So I decided to reformat the windows 7 harddrive. I did this in command prompt mode. After doing so when my computer restarted it said it could not find any harddrive to boot. Windows 8 is installed on the other harddrive, the one that was not reformatted. So how do I get it to start using that harddrive as the boot drive? I checked my bios and even physically disconnected the old HD that had windows 7 on it, but none of that seemed to work even though the Windows 8 HD is definitely in the boot order in the bios.
I am the same person who posted a thread about needing drivers for Windows 7 after dual booting it with my preinstalled copy of Windows 8. So, I was on Windows 7 today, and my screen randomly blinked on and off for 5 seconds, and then came up with a message saying my system display driver crashed but had recovered. Then, about a minute later, it crashed again and came up with a BSOD saying that the display driver had crashed but failed to recover. I do not have the error code from it, as I only saw this screen once, and forgot to copy down the codde because I got freaked out But anyways, I have copied the system report to this post from the Seven Forums System Tool. I am currently running in safe mode on my Windows 7.
I have Windows 8 64 bit Pro Edition working fine using UEFI boot from a SSD disk. I've twice created a system repair disk on DVD but when I use boot override in the BIOS to boot from the DVD, I get the message "Non-system disk....
I am in the process of applying for a work from home job. I had to burn an Iso Image onto a DVD so that I can see if my computer meet the system requirements for the job. The DVD is burned successfully but now I cannot get the system to boot to the dvd... it instead just opens Windows 8. I have a brand new Toshiba Satellite running Windows 8 which is what I came installed with.
How to A UEFI System using VHD. I was able to configure A UEFI system to boot from two different partitions one Windows 8.1 x64 & the second was Windows Server 2012 Rd. I want to do the same with VHD if possible.
Didn't plan ahead Dual boot Windows 7 and 8. I only initially allowed 100 GB for my primary Windows 8 on a 2 TB drive. I'm hardly using the W-7 and now find myself out of space on the W-8 (C) I'd like to repartition to give (C) 1 TB and 1 TB for (D)
So, previously I had Windows 8 and a system image of that drive. I want to dual-boot it with Win7, so I replace my Win8 with Win7, and reinstall Win8 on another partition. Can I restore my Win8 with the previous system image, or will it affect my Win7?
I get as far as " a driver is needed to continue installation" not found, make sure its on the right media. Here is what i got done on my own..
1- BIOS setting "legacy" and U E F I" boot from USB. 2- F 9 to choose boot order.. selected USB device 3- Installation starts for WIN 7 4- Driver is needed to continue, and i have no clue what it is..some one pointed me to . f 6 f l p y-x 64 because its an HP Envy... 5- Driver not found / wrong driver.. 6- Shut down restart.......................
My DVD is Windows 7 ultimate X 32, X 64..
No matter what i cant boot form my USB /U E Fl /WIN 7 pen drive.seems like its not recognized or drivers for the USB chip set not installed.. Of course using the O E M DVD of win 7 fails. because of the G P T style.
What I need to know is that: Is that possible to integrate a loader onto Windows 8 boot loader to reset the activation to trial period and then activate the system with an offline key (activate as offline only)?
This way we could make somekind of loader to set activation status as OK as far as online is not intented. And we can continue to have an trial adventure for life with Windows 8. Is that possible or no one tried it yet?
One more question, does the dev who made that topic has the tool for his method so we can try it on any win8 machine? If so, download link?
I recently put together this computer from parts piece by piece. Unfortunately all these problems started on a particularly large upgrade including new motherboard, processor, heatsink, ram and gpu. So I'm not sure exactly what is causing this problem. Sometimes when I start up I get a BSOD, often a random cause, I've never seen any consistency. And that can cause up to 3-4 BSOD's in a row on boot up until eventually a system repair is attempted, which has to perform a system restore. After the system restore I get another one or two crashes before I am able to keep my computer on. Then a couple of days later, I might suffer the same bizarre chain again.
I'm dual booting Windows 8 and Linux Mint 14 right now with GRUB2 as the MBR. I changed the MBR to Windows, but didn't like the menu screen so I went back to GRUB2. Now, when I select Windows 8 from GRUB2, it has the choose operating system screen and it boots after 5 seconds or if I select it. I used EasyBCD to add the boot entry for Linux Mint prior to re-installing GRUB2 as the MBR. Then deleting the boot entry after switching back to GRUB2. I know on Windows XP, you would edit the boot.ini file located in the root of the c: driver, but on vista and later, I'm not sure how to edit the bcdedit.exe file in c:windowssystem32. When I type the command into command prompt, it displays all the information inside the file, but I'm not sure what command to use to fix the issue.
