I got a windows 8.1 laptop, and I've been used to a windows 7 one. One thing I noticed is that it doesn't seem able to switch between audio devices without being told to. Is there any way of getting the system to switch to headphones when they're plugged in, and back to speakers when they're removed?
View 1 RepliesI want to Make the audio Play in Headphone as well as laptop speaker at the same time. How to achieve this?
Is it Possible to play one application (example: VLC Player) with laptop loudspeaker and another application (Example: Windows Media Player) via Headphone at the same time ? without each sound interfering?
Yesterday, I bought a pair of Samson Studio GT studio monitors. which connect to my computer via USB. However, I'm only getting sound out of one monitor/speaker, that would be the right side with the power cable. I've checked the speaker wires and made sure they were hooked up correctly for polarity. There are no drivers for these speakers on SamsonTech.com. Windows sees everything correctly, as these speakers have a built in audio interface for audio production, which is what I do.
This is definitely not an issue with the speakers, because I managed to hook up my computer to the speakers'/monitors' aux RCA inputs and got sound out of BOTH speakers! What is most interesting is that headphone output from from the SPEAKERS/MONITORS functions the same in both cases. (One case with audio out the right speaker, the other case with audio out of both). However, these speakers (I'm just going to call them that from now on) have two headphone outputs. When hooked up via USB, and when listening on headphones, the phone output to the right only outputs right channel audio, and the left only outputs left channel audio. But when hooked up via the RCA inputs, both headphone outs put out as stereo.
I suspect there is something within my Windows 8 installation that's screwy. I can use these via the RCA inputs coming from my PC's sound card, but I would like to get this working via USB, as mentioned earlier, these speakers have an built in audio interface that I want to use.
I am using windows 8 pro 64 bit but there is no any sound coming from the speaker.i checked everything sound volume and mixer but i think the drivers are installed,see at the screen shot.
View 9 Replies View RelatedI downloaded the most recent version of the realtek drivers from toshiba site and i have no sound when plugging in headphones.
View 6 Replies View RelatedA couple of days ago, I decided to move my tower from my desk to the floor. Everything was working beautifully up until then. I opened it up and removed some dust. After putting it back together, the monitor wouldn't register anything. I left it for a day, came back, and the monitor magically worked again. The wifi card stopped working, but importantly, the sound was working. After leaving it for a night, I came back, reseated the wifi card, and magically, the card worked again. But now, the sound won't work! It's been several days, and this is the situation:
* The sound is not muted. When I press the speaker icon in the tray, the green volume bar moves up and down, as though sound is playing
* If I troubleshoot the 'playing audio', it says that no peripherals are plugged in. I found that if I went into Realtek HD Audio Manager and disabled 'front panel jack detection' in the connection settings, the computer suddenly apparently realises that I do have speakers connected, and when I troubleshoot audio again, it doesn't find any errors. I have to do this every time I restart, but the sound still doesn't work.
* I've downloaded and reinstalled the Realtek HD Codecs twice.
* In Device Manager, it recognises the integrated sound card:
(the PCI Simple Communications Controller device is Intel Management Engine Interface)
* I've disabled and enabled the devices many times, but no dice.
* I've reinstalled the chipset drivers from the motherboard manufacturer
* I've gone into my computer and unplugged and re-plugged any wires that may have come loose.
It's the holidays, and I want to immerse myself in video games. But that's pretty much impossible with no sound .
I am using window 8 (64 bits) Speakers are working fine but there is no sound in headphone
View 2 Replies View RelatedPreviously I had Microsoft LX-3000 USB headphone, windows used to recognized those as headphone, but these new
HP USB headphone are recognized as Speakers. How I can I change it ?
I have read a number of threads on this issue. My HP running windows 8.1 with IDT High Definition Audio CODEC consistently tells me that my headphones are unplugged in both the front and back audio ports of my desktop. I thought getting windows 8.1 on my new desktop would enable me to have audio. Apparently not so far.
I restarted the computer. I reinstalled the IDT drivers. I checked that they were up to date. I tried the troubleshooting method through windows that kept telling me that the headphones/speakers were unplugged. Okay, that's not true. The headphones work. Devise manager had no yellow exclamation marks.
So what's left to do? Buy windows 7 for $100 and reinstall it on this computer to so I can have sound and an operating system that's not infuriating?
I don't think this is due to some virus I managed to get in record time with minimal use of this computer. So what's next to do?
...for SELECT programs? For example, I like to game with headphones on, I listen to music with headphones on and more. I don't like to unplug them every time I'm done, that's too confusing and more importantly, I FORGET ALL THE TIME. play my "Free Alarm Clock" through the speakers despite having headphones plugged in. I use it not only to wake up but also to remind me of other daily things.
I'm not looking for something to play sound through headphones and speakers simultaneously. That would defeat the purpose.
I updated to Windows 8 today, and everything seemed to be going well until I tried playing music through my headphones. They worked fine on my iPhone, but once I plugged them into my laptop, no sound came out.
Pictures:
I ran windows updates today.
I run a 7.0 speaker system connected in multi-channel analogue mode to my Creative X-Fi Titanium.
I set my speaker settings on Windows 8.1 disabling the subwoofer and checking the full-range speakers checkbox to allow the low frequencies to be handled by my satellite speakers.
I've made no changes to the settings and yet I suddenly experienced a decrease in bass after a system restart.
When I checked the speaker settings I noticed that checking/unchecking the full-ranged speakers and subwoofer checkboxes no longer made any difference. i.e. the signal still gets passed to the centre/subwoofer port on the soundcard.
Clicking on the subwoofer on the window, I can only hear sounds from my front left/right speakers. Previously, unchecking the subwoofer checkbox sends the low frequencies to the available full-range speakers.
I have tried using an optical connection on Dolby Digital and it gives the same problem.
I am running the latest driver version available.
I have a Lenovo G580 with Windows 8. I have a weird problem with audio. If the default audio is set as internal speakers and I plug in my headphones the sound just keeps coming from the internal speakers. But if I set the headphones as default, I can switch between the speakers and headphones as I want and there is no problem if only I play music from my computer.
If I try to play something from my browser, however, the sound only comes from the internal speakers and connecting the headphones does nothing. Except (and this is where it gets weird) if I play something from my computer first using the headphones. Then I can play anything from the browser and hear it through the headphones as long as I don't plug them out. If I plug them out, the sound switches back to the internal speakers and trying to plug in the headphones again doesn't do anything. So I have to play something from my computer again with the headphones plugged in and then switch to my browser to again play everything through my headphones.
I have the laptop as stated above, i have had it a week and the user before me had decided to put on 7 instead of 8. i completely wiped and restored to windows 8.1, installed all sammy drivers and ensured it is all up to date.
the laptop had huge instability issues, the hdd was on its way out as mbr was damaged and the heads were ticking badly. then i found the ram was not secured in the sockets properly too. so i fixed it all!
Anyways back to the problem. i have the realtek hd audio drivers installed from sammy, reinstalled the ones from realtek themselves and still nothing.
Main issue, mic and speakers built in work and are fully detected. but the microphone port and headphone port are not detected, no matter what i plug into them.
I have Windows 8.1 x64 and the following:
Radeon HD5450
Samsung TV connected via HDMI to graphics card
AMD HDMI High Definition Audio Device
Realtek HD audio
I have a strange problem that has not always been there but just recently if I don't have any sounds for about 5 minutes the HDMI audio seems to go into some sort of suspended mode and when I click on (generate) a sound (either system or music etc) it takes about 30 seconds for the sound to actually appear (manifest itself) through the Samsung TV speakers.
At first I thought it might be some conflict with the Realtek HD audio so I have disabled this (mobo built-in sound) in the BIOS and uninstalled the realtek drivers. This did not work.
I then thought it was probably an update to the Sound drivers or the graphics drivers for the ATI / AMD Sound card. I have installed the latest catalyst drivers and this did not work. I then fully uninstalled the catalyst drivers including the HDMI Audio and installed an earlier version 9.2.00 from 2012. This did not work either.
The only Playback Audio Device I have in the Sound settings is Digital Audio (HDMI) and I have tried disbling all audio enhancements. This did not work.
Please note that this happens even if I am using the computer (i.e. the screen can be on all of the time and it still happens after a few minutes).
Other things I have tried:
Power Config - disabled Link State Power Management for the PCIe card
One think I have observed (and I am not sure if this is a symptom or a cause) - The "Windows Audio Device Graph Isolation" process uses about 3-4% CPU while the 30 seconds or so elapses between the sound being invoked and it playing through the speakers. the rest of the sstem is relatively in idle. I can reproduce this by clicking on the sound and adjusting the volume a tad. It is meant to make an immediate "bing" sound to show the sound level is clicked or changed.
If I wait the 30 seconds then the sound eventually comes and then if I click on it again (or do other sound related things) then the sounds are instantaneous. Its only of I leave it 5 minutes or so with no sound activity. If I wait, say, 2 minutes the sound is instant too so long as their has been a sound event in the prior 5 minutes or so.
I have a windows 8 laptop and today the sound just stopped working. The windows audio service will not enable and everytime i try to enable it fails due to a duplicate in Windows Audio Endpoint Builder.
Now tricky part is i cant open control panel as it doesn't load, i tried reinstalling windows 8 but it also not load. This all was working perfectly just earlier today. I have no sound, just an x by the sound.
When I watch YouTube videos I get random stutters where the sound skips. The image doesn't seem to freeze though, just the sound
I also get issues with the sound streaming music online, where it pauses for a second and stutters even though it's not buffering.
When this happens, NT Kernel & System shoots up in task manager and uses more CPU than the browser. This by the way happens in every browser, IE, Chrome or Firefox.
It doesn't happen when playing music in iTunes or watching videos from my hard drive.
That being said I'm not posting about a buffering type stutter, I am aware of that and this is not it. This is like basically suddenly the computer has a big spike in memory or cpu usage and the video/sound clip stutters for a sec. But it happens often enough to be very annoying. In a 15 min YouTube clip it happened 10 times.
I have reinstalled my IDT High Definition Codec and my Intel HD Graphics 4000 driver, but still the problem persists.
i get no audio in any games, Youtube, Twitch, etc. I get audio on skype but thats it. I checked my device manager and it says all audio devices are working properly. I checked for driver updates and found none. I have a Dell XPS 8700.
View 2 Replies View RelatedHow do you turn your microphone port or line in, to a headphone port or line out port. For a while I would plug in headphones into the mic port and it would bring up a dialog saying I could change it to another headphone port but it never worked. Now it doesn't even pop up. I want this so when I go on long trips my girlfriend and I could watch a movie together using 2 pairs of headphones.
WIN 8.1
I am using a USB headset with a microphone (Logitech G35). my microphone levels are too high. My microphone picks up almost everything, especially keyboard- and mouseclicks which people have complained about. Whenever I try to adjust the microphone levels to something lower, for example 18dB instead of 24dB, it will reset back to 24dB almost as soon as I start to speak. I have tried to change the levels both in Windows Sound Settings and in the driver for the headset. I have tried multiple dB values, not only the one in my example.
I am using Windows 8.1.
When i try to record from my sound card the volume will randomly go up and down when i try to replay it.
When I try to record from my microphone in the microphone input port it gives an odd problem. Whenever I sustain a note it begins to record just fine but after about 2 seconds the volume adjusts down to about 20% of the original and continues to record. It does this in multiple sounds recording software programs. I have skype turned off and no other microphones hooked up. In the communications tab of the sounds menu I have set it to 'do nothing' but this had no effect. It seems like there is some sort of auto volume leveling thing going on but I cannot find where it would be. I have an HP desktop with beats audio not sure about the sound card otherwise.
I listen to my music on Winamp, yet when I'm using any other program that plays some sound effect (for example, playing some online game on Google Chrome), every time the game makes a bit of a loud sound effect, for a second or so, the music lowers itself for that second, then goes back to its normal volume.
I'm assuming this is some default option that is auto-enabled in Windows 8, since Windows XP never used to do this.
What option do I need to disable so all programs playing sound will not interfere and lower other programs' volume down?
It other words, what option do I need to disable so all the sounds play at an exact same level at all times?
It's definitely not a hardware problem as one minute it's all working, then it suddenly stops. I've tried everything. My sound card drivers are all up to date, it also happens at the same time as youtube videos stop playing on google chrome (despite them loading), windows media player is unable to play and an error occured on youtube on firefox.
However after a few hours it finally lets me on the "configure speakers" setting and I click test and it begins to play sounds again, from then on it plays sound and loads videos.
Edit: When I click "test" it tells me "The device is being used by another application. Please close any devices that are playing audio to this device and then try again."
Latest version of Windows 8 This will take a while A few months ago Windows 8 quit producing sound through my speakers - overnight. I've tried a number of things I'll list here. Volume Control - red 'x' in bottom right corner. AMD HDMI OUTPUT and HEADPHONES are checked. Troubleshooting Speakers/headphones produces "doesn't appear to be plugged in' - they are. See next sentence. Potential issues that were checked. Check audio device issue not present one or more audio services isn't running issue not present audio device is disabled issue not present I can plug the speakers into a Vista PC and hear music so I know(?) the speakers and cable are plugged in and OK. Device Manager>Sound,Video and Game Controls>AMD High Definition Audio Device = device is working properly. Using most recent driver - Rollback is disabled. I have two sets of audio inputs on the back of my PC. Tried them both (have always used the top ones). Someone suggested checking my sound card - don't know how to do that. One last thing . . . I found an MS article telling me to disable/enable the AMD. Did that but as soon as I disabled it, it disappeared.
View 6 Replies View RelatedI've just gotten this Desktop recently with windows 8 pre-installed.
I've started to notice that sounds fades in and out with both video games and videos, such as youtube, etc. I haven't noticed it with windows media player yet but it seems to be happening very often with the game Guild Wars 2. I believe it's not related to the game, considering youtube is also affected.
I have a razer black widow keyboard that's plugged into my desktop and my headset is plugged into the keyboard, if that's relevant.
I have read quite many posts so far regarding this issue in Windows 8. It Looks like they have overlooked the Sound skipping problem during playback on different programs and codecs. Whenever one uses Media Player, Spotify or any other audio programs the Sound skipps and crackles. It comes to the point when this is unlistenable any more. My System is definitely strong enough for handling Windows 8 Pro. I've been trying to use different methods like compatibility installations , playback modifications , drivers etc. but nothing works. When the system goes in high latency then the sound skipps. Do we need to wait for 64bit proper drivers for Windows 8 update or is there any other solution ?
View 9 Replies View RelatedI want to stream my music and videos from my laptop to my smart tv via Wi-Fi so I can listen through my surround sound system.
I cannot seem to do it through the music and video apps in win 8.1
how to set the apps to stream to DLNA devices?
When I play a video in metro ie no sound could be heard but yesterday there was (hibernation). The beginning of the problem was that I had one video opened with sound then paused it opened in new tab second video with no sound while in the first there still was.
So far i restarted the computer and reinstalled adobe flash player googled a lot and not found anything.
I was looking for a way to reinstall metro ie but that didn't work as well(no info) but even though i can uninstall it.
BioStar Hi-Fi A85W Socket FM2 Motherboard - ATX, Socket FM2, AMD A85, DDR3 2400 MHz (O.C), SATA III (6Gb/s), RAID, 8-CH Audio, Gigabit LAN, USB 3.0, PCIe 2.0, CrossFireX Ready
AMD A8-Series AD560KWOHJBOX Quad-Core A8-5600K Black Edition APU - 4MB L2 Cache, 3.6GHz, Socket FM2, Radeon HD 7560D (256 Cores), Dual Graphics Ready, DirectX 11, Fan, Unlocked, Retail
Kingston HyperX Red KHX16C9B1R/4 4GB Memory Module - 1600MHz, 9-9-9, DDR3, CL9, 1.65V, Unbuffered
Toshiba HDKPC03 DT01ACA100 1TB Hard Drive - 1TB, 7200 RPM, SATA, 3.5"
Window 8 64 bit.
I recently put this computer together as a cheap media machine. Everything worked. It connected via onboard NIC to the internet, it had sound. No problems.
Then I upgraded by adding another stick of RAM. Same module 4gb. and all hell breaks loose.
I lost lost and internet. Media sound service couldn't start. Said something along the lines that found new hardward. And it wasn't communicating with my NIC card anymore.. I tried updated the drivers. No joy.
I contacted Biostar and asked for an issue. They recommend me to update drives and then reset bios setting to factory defaults. I tried that. No joy.
I then RMA's the vendor and got another mobo. Installed it and it had the same issue. No sound no internet.
Last nite I decided maybe I should just reinstall windows, but now my computer freezes on the bios screen.
I have the latest Creative driver on here for Win 7 64bit, and I'm not getting any sound.
View 9 Replies View RelatedI have a 60 inch smart tv samsung the sound is not as clear as i would like so i am thinking of a sound bar, but where to start i.e., the size .has it got to match the size of the tv has it got to be the same make as the tv ?
View 4 Replies View Related