Audio :: No Audio Over Hdmi Without Rebooting?
Oct 23, 2013
I just want to clarify that this didn't occur before updating to windows 8.1. Before the update my sound would switch between the tv and the laptop speakers automatically when as I unplug and plug in my hdmi cable. Now, I put my laptop to sleep when not in use or when transporting for obvious reasons and I really don't want to have to reboot every time I connect my tv.
Now my problem is, every time I plug in my tv, I get the usual switch over but the audio never gets to the tv. It shows up as usual in the playback devices and is the default. I'm not sure if it's drivers and ASUS doesn't have any audio drivers up for windows 8.1. I have read that this is a common problem with everyone. I'm not sure what else to do other than go through a lengthy process to backup and factory install my laptop back to 8 or wait for updated drivers.
The laptop: ASUS K55A w/ 8gb ram and upgraded wireless card.
View 5 Replies
ADVERTISEMENT
Jan 9, 2014
I have Windows 8.1 x64 and the following:
Radeon HD5450
Samsung TV connected via HDMI to graphics card
AMD HDMI High Definition Audio Device
Realtek HD audio
I have a strange problem that has not always been there but just recently if I don't have any sounds for about 5 minutes the HDMI audio seems to go into some sort of suspended mode and when I click on (generate) a sound (either system or music etc) it takes about 30 seconds for the sound to actually appear (manifest itself) through the Samsung TV speakers.
At first I thought it might be some conflict with the Realtek HD audio so I have disabled this (mobo built-in sound) in the BIOS and uninstalled the realtek drivers. This did not work.
I then thought it was probably an update to the Sound drivers or the graphics drivers for the ATI / AMD Sound card. I have installed the latest catalyst drivers and this did not work. I then fully uninstalled the catalyst drivers including the HDMI Audio and installed an earlier version 9.2.00 from 2012. This did not work either.
The only Playback Audio Device I have in the Sound settings is Digital Audio (HDMI) and I have tried disbling all audio enhancements. This did not work.
Please note that this happens even if I am using the computer (i.e. the screen can be on all of the time and it still happens after a few minutes).
Other things I have tried:
Power Config - disabled Link State Power Management for the PCIe card
One think I have observed (and I am not sure if this is a symptom or a cause) - The "Windows Audio Device Graph Isolation" process uses about 3-4% CPU while the 30 seconds or so elapses between the sound being invoked and it playing through the speakers. the rest of the sstem is relatively in idle. I can reproduce this by clicking on the sound and adjusting the volume a tad. It is meant to make an immediate "bing" sound to show the sound level is clicked or changed.
If I wait the 30 seconds then the sound eventually comes and then if I click on it again (or do other sound related things) then the sounds are instantaneous. Its only of I leave it 5 minutes or so with no sound activity. If I wait, say, 2 minutes the sound is instant too so long as their has been a sound event in the prior 5 minutes or so.
View 4 Replies
View Related
Jun 17, 2013
Basic Specs
Brand New Toshiba Satellite C855
Win 8 64-bit
6 GB RAM
Display Adapter: Intel(R) HD Graphics (2000)
Driver: Intel 9.17.10.3040
Playback Devices
Show Disabled Devices - checked
Show Disconnected Devices - checked
High Def Audio Device displays as not plugged in
Cable is plugged inCable has been tested on backup laptopCable connected to HDTVVideo is fineNo Audio
I have spent hours installing and uninstalling drivers from the Toshiba and Intel sites. Tech support said to return it but I have just spent 2 days installing software. I never took a break to watch Netflix.
View 9 Replies
View Related
Dec 18, 2012
Recently upgraded my Dell Latitude E6420 to Windows 8.
When I attempt to use my Sony TV as a second monitor via HDMI cable, I no longer get audio. Cable is fine and worked previous to upgrade.
Video comes up fine. In "Playback Devices" (with both "Show Disabled" and "Show Disconnected" devices checked), Digital Audio is greyed out and unable to be selected as a default device - simply says "Not plugged in".
I've tried updating various drivers, but to no avail.
Display adapters:
Intel(R) HD Graphics 3000NVIDIA NVS-4200M
View 9 Replies
View Related
Jan 2, 2014
My friend connected an external monitor to his Sony laptop using an HDMI cable. The problem is that there is no audio from the external monitor speakers. The sound still comes out of the laptop speakers. When I look in Playback Devices, I see what appears to be the speakers as a device (can't remember exactly what is was called, but it was a somewhat vague name like "audio device"), and I've tried various settings, yet I can't get sound from the speakers.
So my question is, does an HDMI connection on a monitor support audio, or does he need to get a audio cable and use the green audio jack that is on the monitor, which I thought was just needed with the VGA connector.
View 4 Replies
View Related
Jan 9, 2013
I recently upgraded from W7 to Windows 8, and now my HDMI audio is acting up.
I have only ever used my Samsung TV as a monitor. When switching from headset to tv audio I used to click the sound icon and select "set as default"
Now I CANNOT select "digital audio (HDMI)" from playback devices, as it is grayed out, and says "not plugged in"
Strangest part is that if I restart my computer, it works just fine, and then somewhere from 30 minutes to 2h it suddenly stops working. It doesn't seem to matter what I am doing, watching a movie on VLC, netflix, or even just working on a speadsheet.
Also noteworthy: girlfriend has exactly the same computer, same problem!
I've tried updating/(un)installing the latest drivers from AMD, and Realtek, as well as re-installing windows.
Windows 7 64 (upgraded to Windows 8 64)
AMD FX 8120 8 core processor
AMD Radeon HD 7670 2 GB
Aspire M3450
Samsung 46" LCD TV
View 4 Replies
View Related
Jan 28, 2014
I successfully got bootcamp to work on my iMac, and the only issue that I have run across is that I do not have any sound whatsoever coming out of my speakers.
The sound icon just remains at the speaker with a red cross, and no matter what I do, I just can't get it to work.
In Device Manager, the sound device that is being used is 'AMD High Definition Audio Device', and I can't seem to find an update for it anywhere. Under the sound area of control panel, if I go to the playback tab it says that the only available playback device is 'AMD HDMI Output', and it says that is "not plugged in".
View 9 Replies
View Related
Aug 16, 2014
I have been struggling with this for weeks - whenever I plug my computer into a TV through an HDMI cable, the screen visual transfers perfectly but no sound comes through the TV.
note that I have scoured the forums and have tried all of the basic suggestions that people have given:
-HDMI or similar does not show up in 'Playback Devices'
-All of my drivers are up to date
I am running Windows 8.1. I have an ASUS Q550L notebook (can see all the specs here: Asus 15.6" TouchScreen Laptop Intel Core i7 8GB Memory 1TB Hard Drive Q550LF-BSI7T21 - Best Buy)
View 4 Replies
View Related
Mar 8, 2014
As the title says, I've tried connecting my TV to my computer with an HDMI cable, and the video part works, but no sound plays. When I checked the list of playback devices, the TV appeared (as shown below), but it apparently cannot play sound.
I don't think I know anything beyond what I've posted,
Also, as a side note - I am completely unable to interact with any of these objects - I cannot set something as a default device; there is no response when I do it, and disabling the audio device only works until current sources of sound (like videos) are restarted.
View 2 Replies
View Related
Apr 19, 2013
I just bought a new laptop and tried the HDMI, but there is no audio and the image is poor.
It's an Asus X501A with Pentium 2020M Ivy Bridge and Intel HD Graphics.
I tried changing the output resolution, to tweak the audio properties, etc.
No success.
View 7 Replies
View Related
Jul 13, 2013
I have two displays, an HDTV connected through HDMI and an older LCD connected via DVI. All my audio comes through the TV. In fact, I've disabled the on board audio device on the motherboard. I noticed that the Audio tab in the Catalyst Control Center says "Your displays do not support audio.", but it shows my Panasonic TV in the Playback devices. The playback does work, but I get weird mutes.If I go full screen in Youtube or Netflix the sound mutes for like 30 seconds. When i anything (change tabs in Chrome, click a link, move windows around in a VM) on the other display, the sound mutes for 30 seconds. I basically am unable to do anything on my other display while something is streaming.
View 3 Replies
View Related
Jul 4, 2013
I've bought an HDMI cable to connect my laptop to TV, i've gone into the control panel and checked that "show disabled devices" and "show disconnected devices" are both allowed and still i dont seem to get an option for HDMI for audio. The picture has come through fine, but nothing I do with the audio seems to work.
View 6 Replies
View Related
Aug 15, 2014
I have a Asus N750JV. My problem is that when I want to play a movie on the Smart samsung tv with my HDMI cable the video is perfect but the sound is still playing from my laptop instead of the tv.
View 5 Replies
View Related
Aug 21, 2014
Recently I decided to go ahead and update to the Windows 8.1 version of the Realtek HD Audio Driver. I procrastinated because it told me I'd have to uninstall the original audio driver and I knew it would take a while to do everything needed. It didn't work that after uninstalling the original audio driver, then restarting like Windows told me to do, I kept getting error messages that forced my computer to restart until eventually my computer let me log in and install the updated audio driver.
However, with the updated version of this driver I had the same issue I got with the original one only much much worse. The original Realtek HD Audio Driver that I had on my computer made music and videos sound absolutely awful when headphones were plugged in. I found out that this is because the driver automatically puts on so-called "enhancements" whenever headphones are plugged in. This was a very simple fix, simply go to "Sound", then under "Playback" you click on "Speakers", then go to "Enhancements" and check the box labeled "Disable all sound effects." Then sound through headphones would return to normal.
Well, with the Window 8.1 version of this audio driver, I can do the same thing, but it never stays that way. Every time I plug in my headphones, it resets back to having enhancements. The strange thing though is that it says the enhancements are disabled but when I reactivate the enhancements(No difference in sound quality) then deactivate it again, suddenly the sound through my headphones is back to normal.
Did the audio driver not install properly? Is there something I can do to permanently disable the audio enhancements?
View 5 Replies
View Related
Jan 1, 2014
OS: Windows 8.1 Pro
Processor: AMD FX-1400 Quad Core
RAM: 8.00 GB
Storage: 1.73 TB of 1.81 TB available
System Type: 64-bit Operating System, x64 based processor
A while ago, my PC was having some lag issues that made the computer practically unusable. I found out in msconfig that I had almost all services running. I disabled many of the services, and I made sure not disable the necessary ones (i.e, Windows Audio.) I restarted my computer and there was a red circle with a white "X" over the audio icon. I clicked on the icon. A window named "Playing Audio" opened. On the window was a bar similar to the one shown while loading/downloading something. Above the bar said "Detecting Problems" and then "Scanning for hardware changes...". This went on for about 10 seconds. After this, the window changed. At the top in blue was "Troubleshooting has completed". Under that was "The troubleshooter made some changes to your system. Try attempting the task you were trying to do before." In the center of the window was "Problems found-Hardware changes might not have been detected".
In the search bar, I typed "Manage audio devices". When I opened it up, the window told me that there were no audio devices installed. I have checked in Device management under "sound, video and game controllers" That I have sound drivers installed (AMD High Definition Audio Device & High Definition Audio Device.) I have tried multiple times to uninstall/reinstall the drivers to no avail.
View 9 Replies
View Related
Sep 15, 2014
I have a windows 8 laptop and today the sound just stopped working. The windows audio service will not enable and everytime i try to enable it fails due to a duplicate in Windows Audio Endpoint Builder.
Now tricky part is i cant open control panel as it doesn't load, i tried reinstalling windows 8 but it also not load. This all was working perfectly just earlier today. I have no sound, just an x by the sound.
View 2 Replies
View Related
Sep 15, 2014
I need removing the SmartAudio application from my Control Panel. Every time I click on it, it says "failed to initialize" - I no longer have it nor do I need it. I would just like to get rid of it from Control Panel, it's not slowing my system down or anything, it's the OCD in me that is killing me seeing a non working function there!
View 1 Replies
View Related
Jul 27, 2013
When I watch YouTube videos I get random stutters where the sound skips. The image doesn't seem to freeze though, just the sound
I also get issues with the sound streaming music online, where it pauses for a second and stutters even though it's not buffering.
When this happens, NT Kernel & System shoots up in task manager and uses more CPU than the browser. This by the way happens in every browser, IE, Chrome or Firefox.
It doesn't happen when playing music in iTunes or watching videos from my hard drive.
That being said I'm not posting about a buffering type stutter, I am aware of that and this is not it. This is like basically suddenly the computer has a big spike in memory or cpu usage and the video/sound clip stutters for a sec. But it happens often enough to be very annoying. In a 15 min YouTube clip it happened 10 times.
I have reinstalled my IDT High Definition Codec and my Intel HD Graphics 4000 driver, but still the problem persists.
View 9 Replies
View Related
Jan 10, 2014
I have Asus All In One ET2701INKI, the problem is the microphone does not work properly, It has dense distortion and echo, microphone works in other devices very well.
I am using Windows Pro 64 Bit, and I have latest Realtek Driver, I have tried High Definition Audio but again no solution.
I have read that if I choose "Separate all input jacks as independent input devices" from Realtek Audio Manager's Advanced Settings, I am sure the problem will be solved, but I do not have Advanced Settings.
I have only:
Display Icon Notification Window
Enable Auto Pop Up Icon
View 9 Replies
View Related
Nov 24, 2013
I was trying to fix a problem, and then I removed some programs, and I think i accidentally removed a file that is needed for the dolby. Now I can't open it, and when I try it says that I could re-install it. But how?
View 2 Replies
View Related
Feb 11, 2014
I've been trying to configure my brand new hp PC with Windows 8.1 pro to auto-sleep but I have been unable to do so. If it hit the power button or select sleep from the menu it will sleep, however.
I ran powercfg/energy and it appears from the report that this is the issue:
System Availability Requests:System Required Request
The device or driver has made a request to prevent the system from automatically entering sleep.
Requesting Driver Instance HDAUDIOFUNC_01&VEN_111D&DEV_76E0&SUBSYS_103C2B04&REV_10014&3288eeae&0&0001 Requesting Driver Device IDT High Definition Audio CODEC
Why audio codec would prevent sleep? Is there anything I can do?
View 1 Replies
View Related
Oct 24, 2013
I updated to 8.1 because supposedly, it was to offer features similar to win 7. Instead, it's even worse than win 8. Now, the sound quality on my laptop is lousy because the Dolby Audio driver receives an error message and isn't working. I went to Lenovo (I have a Ideapad N Series 580) and followed these instructions from Lenovo and microsoft, which unfortunately didn't work. I'm still getting the same error message. I wish I had never heard of windows 8.1! Many have had this same problem after installing 8.1. This instructions are from Answers.Microsoft, but didn't work.
Open Device Manager. (Right-click on the Start button and choose Device Manager).
Expand the Sound, Video and Games Controllers section.
Right Click on the Conexant Smart Audio HD item and choose Uninstall.
Still in Device Manager, click on Action>Scan for new Hardware.
The Conexant Smart Audio item will re-appear.
Right-Click on it and choose update driver.
Navigate to d:driversaudio.
When that's done, close Device Manager.
Open File Manager and navigate to D:driversAudioDolbyGUI and install Dolby Home Theater.
These instructions are from Lenovo and didn't work.
View 9 Replies
View Related
Jan 28, 2014
So about a month after I bought my computer,all of a sudden there was no audio comming from my headphones or speakers. i do have to say that windows 8 was a bit new for me because i was using windows xp the only way i can get audio now, is by plugging in a usb with bluetooth connection. even HDMI won't work. i'm getting no errors when running errorchecker.
Perhaps usefull info:
-pc Model No: HP ENVY h8 PC series
-running windows 8.1
-i have extra beats audio (for audio settings).
View 6 Replies
View Related
Oct 13, 2013
I have a Gigabyte GA-F2A75m-HD2 (Rev 1.0) board and this is quite an odd one. The front port worked with Ubuntu and other Linux distros but it seems to be the opposite case with Windows 8.1. I installed the latest Gigabyte version of the Realtek HD Audio Manager but it still doesn't work. What should I do?
I have the codec ALC887
View 9 Replies
View Related
Jul 22, 2014
Whenever I use my computer, if I don't play any audio on my computer for a certain period of time, and I have to restart the computer.
It's really annoying because I like to view Facebook and Tumblr for a while before I do something such as playing Team Fortress 2.
View 2 Replies
View Related
Feb 13, 2014
HP ENVY 20-d094 TouchSmart Desktop
How can I use 'external speakers' (using the external speaker jack on the back of my touchscreen) ...
AND NOT have it over-ride the BEATS audio.? Once plugged in , the external speaker are heard BUT the BEATS AUDIO is muted. ! (OFF)
Is there a way to have BOTH speaker 'sets' be heard ?? The Touchscreens Beats Audio & my external Boston Acoustics speakers ?
View 4 Replies
View Related
Feb 14, 2013
how to configure FFdshow to work with WMP12
View 5 Replies
View Related
Feb 2, 2014
Two programs are creating audio outputs such as a game program and iTunes, I desire to send the game program to my headset while remain the iTunes audio to my default playback device, speakers.
I am wondering if there is audio management software. Similar to how if I am on Skype I can communicate through headset and hear them on the headset while the audio on iTunes by default is outputted through the speakers.
I want to play Nether and hear everything through the headset and keep music playing on the speakers so my girlfriend does not hear me play games.
View 5 Replies
View Related
Jan 24, 2014
So today I got a new acer laptop with windows 8. The laptop only has one audio/microphone input in it. When I first plugged the headset microphone jack into the singular input, it asked what device it was. I selected headset and moved on. Later, I could not find my headset mic in my audio devices/microphones. I could only see the computer default internal microphone.
View 2 Replies
View Related
Mar 12, 2014
I just bought a new pc and received it today, and i plugged my headset in to check if i hear audio from both speakers and headset but its not working. When i plug my headset in i only hear audio from my headset and not the speakers. Ive been googling and found something about it but with the newest realtek hd audio i dont have the Playback Device there, only the Recording Device. In this picture it has both the playback and recording device.
View 9 Replies
View Related
Jul 19, 2014
i've been having this problem since I THINK starting to use a HDMI wire. But now, i cannot get any audio from the audio jacks, they are detected, but no sound is produced and I just cannot figure it out. I've disabled the HDMI, installed, un-installed, re-installed audio drivers and pretty much any method and i can find thus far and nothing at all has worked. I'm a huge lover of music, and the is driving me insane!
Note: The speakers are fine, they work with my iPhone.
View 1 Replies
View Related
