Audio :: Soundblaster Card And Microphone On Headset Not Working
Feb 12, 2014
The microphone on this non-brand headset isn't working due to the microphone not showing up under the recording devices. Audio is working for the headset (and anything else that I plug in ), but not the microphone. The green bars do not go up in the audio manager either when I test the microphone. I'd like to use this for teamspeak, but there doesn't seem to be anything that I have found on google to solve this so far, or anything that I've figured out on my end. I have attached a screenshot of what is happening in my audio manager. When any headphones/earphones are plugged into the green jack, they work and sound is audible, however in the audio manager it still says that no headset is plugged in even with them plugged in & working.
- As well, I have a d945gtp motherboard
- I also have an actual sound card in the motherboard ( a soundblaster live sb0060 )..it currently doesn't work at all, and shows up in the device manager as 'multimedia audio controller' with a yellow exclamation mark. If I could get this working instead, that'd be much better too as an alternative fix.
So today I got a new acer laptop with windows 8. The laptop only has one audio/microphone input in it. When I first plugged the headset microphone jack into the singular input, it asked what device it was. I selected headset and moved on. Later, I could not find my headset mic in my audio devices/microphones. I could only see the computer default internal microphone.
I was recording with my internal realtalk hd mic on my laptop, but it stops working everytime I plug in my head set. There's nothing special about this headset, and there's no microphone on it. Sadly, my RT mic does this with any headset I use. It's frustrating when I unplug my headset and the mic begins to work fine again. Is there any reason why it might be doing this? Whenever I try to configure the mic, it simply just doesn't recognize any noise being made when the headphoes are plugged in.
After the latest lot of Windows Updates for 8.1 my Asus Xonar STX no longer works and I get an error message saying
"an Asus Xonar STX has been detected but the drivers appear to be corrupt, please try reinstalling them."
I have tried uninstalling and reinstalling both the card and drivers and the card is still not working.
It is 100% to do with the latest updates, I have done a system restore to before the updates were applied and my sound card works fine. If I install the updates again, my card stops working, so there is no doubt it is the updates causing the problem.
There are no driver updates for my sound card either, so it's not driver related. I have also seen several other people with different sound cards on other websites reporting the same thing, so the problem is also not unique to me.
Which update is causing it or if there is a work around? I have turned Windows Updates off for now but I don't like having to do this and would rather find a alternative work around or fix.
I just bought a new pc and received it today, and i plugged my headset in to check if i hear audio from both speakers and headset but its not working. When i plug my headset in i only hear audio from my headset and not the speakers. Ive been googling and found something about it but with the newest realtek hd audio i dont have the Playback Device there, only the Recording Device. In this picture it has both the playback and recording device.
I have a pair of headphones, with a microphone, and a headset that I use for my PS4, both with 3.5mm jacks, that I want to use as a microphone for my laptop, as opposed to the garbage built in webcam one.
However, having tried both of them in the microphone jack on my laptop, I can't record any sound. Yes I am plugging them into the correct jack, and yes they are recognized by the computer and sound menu of the control panel as microphones.
However, they will not record ANY sound, even with the recording level turned up all the way. I have even acquired a 3.5mm to USB converter, and tried plugging them in, but I get the same results.
So yesterday I did a refresh of my PC (full) and before I did, I would have my speakers and my headset in the Playback Devices, where I would enable or disable which ever one I was usning.
If I was chatting on Skype I would enable my headset and disable my speakers and vice versa. However, there is no option, I have chcked for Disconnected and Disabled devices and still no luck, it's not a USB but more just pink and green colour coded jacks?
- All updates for GPU and Soundcard aswell as Windows are up to date. - The mic is working and is being picked up.
I have an Asus R503U laptop running Windows 8.1, 64 bit, and the headset has never worked properly with this computer. I am pretty certain it is not the headset, but a settings or software issue..
For one thing, there is no "headset" listed as a separate playback option even after I plug the headset in - however, I can hear through the headset if I choose the speaker as a playback option, and if I unplug the headset, sound will play through the computer speaker, so I have just been using the speaker setting for playback when wanting to hear through the headset.
However the recording/microphone option produces a horrible humming feedback sound when I try to use Skype or record through the headset mic. The recording options are "microphone" or "stereo" and even if I disable "stereo" I have the problem.
My drivers are uptodate - I am using VIA drivers. I have fiddled with various sound settings but can get nothing to work. I have all enhancements to sound disabled and also tried using the trouble shooter to no avail.
I am trying to do some recordings of video games for my friends videos but I am having issues with recording desktop sounds (in other words the game itself) anything I do doesn't work. What I am wanting to do is have stereo mix as my default recording device and have my headset as the communication but my stereo mix is currently unavailable while my headset is default. If my stereo mix is default then it works and my headset is currently unavailable. I really don't understand what is going on. Everywhere I look to fix the problem has nothing for me. I am using Windows 8.1 and have an HP Envy Laptop. I have specs written in my profile.
I've read that you have to go to the microphone, double click on it, go to the levels tab, and move the lever all the way up, as long as the boost lever. I don't have the boost. Only the microphone is present as you can see in the screenshot. That doesn't work.
I just downloaded Windows 8 last Thursday so all of my updates are installed. I updated to the latest drivers for my sound card thing, which I guess is intergrated. Now, before you tell me it's my mic, before Windows 8 I was using xubuntu until I could afford Windows 8. My microphone was fine. It picked up great. I could hide it behind my monitor (which is atleast 3 or 4 feet away) and it would still pick up fine. Now in order for it to pickup my voice like it did behind the monitor I have to have it literally 1 cm away.
I have two laptops running windows 8, Asus AO756-2626 and HP dm4-3099se. Internal mic works on both. I have two computer mics and one professional type that needs an adapter for the jack. When I insert either mics, nothing happens on either laptops. The external mic in the sound settings is grayed out and says currently unavailable.
I just got myself a brand new PC with Windows 8. My problem is getting my mic to work the same way it did with my laptop with windows 7 64 bit (Worked perfectly, microphone level at 47 and boost at 10db). I've tried everything, and even with microphone level at 100 and boost to 30db its just alot of background noise and still low volume. Disabled everything on the enhancement tab, and i've tried everything on the other forums. And yes, i've updated my Realtek drivers to the lastest version. So i'm down to maybe something with the motherboard, or bios?
When I was setting up my microphone I set it up so that the mic comes on when the computer starts. I want to reset it so that it doesn't do that and put it in the Quick Launch toolbar / system tray instead where it would be more convenient a la windows XP style.
I have a windows eight computer, and when I plug in my microphone (on my headset) my speakers are muted. I assume there is a simple sound option somewhere that does this, but I have been unable to find anything by looking around or searching google. The headset does not mute speakers on other computers when the microphones are plugged in, nor does it differ with other headsets.
I only just bought a new computer with Windows 8.1 on it. (SO not impressed with this OS.) Anyway, I'm trying to set up all my externals. I have an external microphone I use through a Tascam US-200 audio interface. It has the ability to record in stereo and I have done so for some time using Audacity on my old computer running Windows 7 with no problems.
I checked that the Tascam system has been tested with Windows 8. No problems there. I installed the drivers and audacity and set everything up. However, I'm still only getting mono sound instead of stereo when I attempt to record. I've double checked that the Default Format for the input device is set to 2 channel, 16 bit, 441000 Hz and that Audacity is set to take in a stereo input. No joy. I can record sound but only in mono.
P.S. After repeated attempts I CAN get the system to recognise the stereo input... for less than a second when first turned on. Something is getting through but for some reason it just doesn't keep.
I have a HP dv2519tu laptop. I have clean installed Windows 8 Pro wmc last week. But after installation my default microphone is not working. I have checked everything like drivers but still there is no solution.
I am using a USB headset with a microphone (Logitech G35). my microphone levels are too high. My microphone picks up almost everything, especially keyboard- and mouseclicks which people have complained about. Whenever I try to adjust the microphone levels to something lower, for example 18dB instead of 24dB, it will reset back to 24dB almost as soon as I start to speak. I have tried to change the levels both in Windows Sound Settings and in the driver for the headset. I have tried multiple dB values, not only the one in my example.
I recently upgraded my HP Touchsmart IQ500 from Vista Home Premium to Windows 8 Pro. Aside from the lack of a media center or otherwise out-of-the-box-inability for DVD playback I've been enjoying the change. I solved the DVD problem with VLC, but I cannot figure out how to get my microphone to work now. It was fine before the upgrade, and now there's just silence when trying to Skype or record otherwise.
updating the drivers in the Device Manager which I have tried, only to get a message that reads:
Windows has determined the driver software for your device is up to date.
I have a new windows 8.1 laptop and my built in microphone does not work. When I plugin an external headphones that includes microphone, it works. I have checked the Device Manager and the microphone is enabled. I checked and the driver is updated.
I have a home built HTPC running Windows 8 with Windows Media Center. My sound card is a Silverstone EB01 USB DAC (i.e., it's an external USB device). When the computer wakes from sleep, there is no sound. I can fix this by either (a) unplugging and reconnecting the USB connector or (b) disabling then re-enabling the sound device.
What's worse, it worked perfectly fine under Windows 7.
There are no drivers for this device, it's pure plug'n'play. In case it's relevant, the Device Manager seems to recognise it as a Burr-Brown PCM2072E.
I recently update my Dell Inspiron 15r with an inbuilt ATi Radeon HD 8730M to Windows 8.1. Unfortunately, after the update only the Intel HD card worked. I re-installed the drivers from the Dell website but they did little to solve the problem except fix CCC. Games such as Assassin's Creed Revelations which used to run at 60fps at maxed out settings now stutter at medium to low. I bought this laptop because of its dedicated card and it is a shame it is not working. I have the Windows 8 re-install disk supplied by Dell but I would like to fix this problem rather than shy away from it.
My problem is Windows 8 will occasionally BSOD after the sound goes quiet or dead while watching a video or playing a game and I turn off my M-Audio Fast Track Pro in an attempt to recover sound. This is basically a soundcard that is used to record music or MIDI components. It is attached via USB. I have disabled all other soundcards besides the M-Audio.
Im certain the drivers for this device are current and up-to-date. They do state to support Windows 8 on the M-Audio website found at Fast Track Pro Drivers
My tool named "Blue Screen Viewer" shows to have 2 dump files, but I used the "SF_Diagnostic_Tool" as per forum instructions. The zip file has been attached ...
Updated all drivers, realtek, nvidia, amd chipset and bios. Remove everything from USB post and booted without services, disabled network drivers.
When I uninstall the nvidia drivers I dont get that much latency, I do a clean install and using different drivers and it always comes back. I read on this thread that its some interfering with the drivers.
My irq's seem strange the Microsoft acpi compliant system has 511 entry's is the normal?
::System::
Windows 8.1 all updated. Memory (RAM) 16281 MB CPU Info AMD FX(tm)-8350 Eight-Core Processor
I have installed windows 8 pro with media center-64bit,on my pc . I think my graphics card is not running, none of my games are running,I think my pc is using onboard graphics .
running win 8 on inteldh55pj motherboard,ati Radeon 5770 graphics card
I have a windows 8 laptop and today the sound just stopped working. The windows audio service will not enable and everytime i try to enable it fails due to a duplicate in Windows Audio Endpoint Builder.
Now tricky part is i cant open control panel as it doesn't load, i tried reinstalling windows 8 but it also not load. This all was working perfectly just earlier today. I have no sound, just an x by the sound.
I updated to 8.1 because supposedly, it was to offer features similar to win 7. Instead, it's even worse than win 8. Now, the sound quality on my laptop is lousy because the Dolby Audio driver receives an error message and isn't working. I went to Lenovo (I have a Ideapad N Series 580) and followed these instructions from Lenovo and microsoft, which unfortunately didn't work. I'm still getting the same error message. I wish I had never heard of windows 8.1! Many have had this same problem after installing 8.1. This instructions are from Answers.Microsoft, but didn't work.
Open Device Manager. (Right-click on the Start button and choose Device Manager).
Expand the Sound, Video and Games Controllers section.
Right Click on the Conexant Smart Audio HD item and choose Uninstall.
Still in Device Manager, click on Action>Scan for new Hardware.
The Conexant Smart Audio item will re-appear.
Right-Click on it and choose update driver.
Navigate to d:driversaudio.
When that's done, close Device Manager.
Open File Manager and navigate to D:driversAudioDolbyGUI and install Dolby Home Theater.
These instructions are from Lenovo and didn't work.