Apps / Software :: 16Bit DOS Program Won't Run In Windows 8 32bit
Aug 5, 2013
I d/ld the trial version of Win 8 32 bit specifically to see if a DOS program that I have would run in Win 8 32bit.
To my surprise it doesn't run, or at least run correctly. I get the warning about running a 16 bit program so I OK it.
Then it tells me the program can't be run in a window or full screen. It might as well say it won't freaking run at all that would be more accurate!
Odd that PC World Mag touts Win 8 as being able to "run your DOS programs" just like you did before! There was also a reference to something being in Control Panel to enable 16 bit programs.... again no joy there I see nothing in CP in my trial version.
Sure I can run the program in a VM like I do on Win 7 and yes I can run it on XP Pro just fine. But it would be nice to have correct information about what the OS can and can't do.
I have purchased notebook with OEM version of Windows 8 64bit. The system is not professional version of Windows 8. I would like to run 32 bit application which is not possible to install it on 64bit system.
The Direct3D acceleration for 32bit Windows applications is disabled. I need to enable this so that most games and Direct3D using Windows Store apps start working again.
How it went:
Previously, Microsoft WDDM v1.0 drivers were installed (from Windows Update) and the system had no problems. Everything was working, well, almost everything. That was when I installed Minecraft. As I launched it, an error popped up saying 'pixel format not accelerated'. I researched on that and found out that it was an OpenGL issue. I downloaded and launched GPU Caps Viewer and found out OpenGL v1.1 on my system, whereas Minecraft needed 1.4 or more to run. I further researched and found that the Microsoft's WDDM v1.0 drivers supported the maximum OpenGL v1.1 (well, at least for my GPU). However on Intel's official site, it said my GPU CAN support OpenGL v1.4. And also on Minecraft forums someone said that Intel's drivers were needed for older GPU's in order for Minecraft to work. So I looked at the Download Center, but the latest drivers for my GPU were for Windows 7 32 and 64bit not Windows 8 [URL] .....
Upon thinking that at least Windows 7 drivers would work on Windows 8 if not XP's or Vista's, I downloaded the Windows 7 x64 drivers. They installed without an issue. Restarted my PC. Checked GPU Cap Viewer again, and voila! OpenGL version 1.4 was displayed. I re-installed Minecraft and it worked like a charm! Also checked another OpenGL animation software Blender and it was also working . But then I noticed something. Some Windows Store games and apps were exiting as soon as opened them. Also all the desktop games I have e.g Warcraft showed some Direct3D or DirectX related error. All of these applications were 32bit.
I then opened up "dxdiag".The 64bit version said "Enabled" for all three as you can see below:
But when I opened the 32bit one, first it said this:
And then on the display tab, Direct3D acceleration was disabled:
What have I tried:
1- As seen from some tutorials around the web, I went to Advanced Display settings but no troubleshoot tab was found:
So yeah, no moving the slider to right side to give 'Full' Direct3D/Hardware acceleration. Those XP days are long gone.
2- As stated above, I have updated the video drivers to 'Intel's' latest version. ( Also tried the second latest version just in case).
3- Updated the DirectX through web setup. It now says that newer or equivalent version is already installed. Also installed DirectX 9.0c (June 2010) all to no avail.
4- As referred by many people, I have checked this link: direct3D acceleration is not available in Windows 7 - Microsoft Community (look at the answer) There is no "SoftwareOnly" registry key that I could change from 0 to 1.
5- Note that this problem persist only in 32bit Direct3D using applications NOT 64bit. The driver works well for the 64bit apps.
Now from what is stated above, it is clear that this issue caused by Intel's driver but it may also be a Windows problem too. And I think I am currently running out of options here. WDDM drivers are nice but wouldn't it be great if you could have OpenGL v1.4 along with Direct3D enabled? So I could run things like Minecraft. As a side note, a year ago I had Windows 7 32bit installed having latest Intel's drivers and with Direct3D enabled without an issue. Now this problem either could be because of Windows 8 or drivers.
i am wanting to install some application that i had on my windoes XP 32 bit....but when i try to install them to windows 8 64 bit,there pops out a message saying that the applications are not supported by the system .....Is there any way to make a 32 bit application to run on a 64 bit windows 8?
Windows 8.1 32bit OS. My audio/video editing needs are relatively simple, yet I only seem to find programs which are insultingly simplistic and don't offer the functions I need; needlessly overly complicated, or they do not work just right and are literally frustrating to use.
I am in need of a video editing software. It has to not have the 4 main problems that I keep running into, which all of the ones I've tried have to some degree.
1. Output file sizes: If I import a video which is 87mb, my output options shouldn't all be several hundred mb's or a few gb's. Why can't these programs just import and output files which are like-for-like? If I'm cutting parts out of the video, then the resulting file should be just under 87mb. If I'm joining two equal sized videos together on a timeline, then the resulting file should be 174mb (the total of the two 87mb source files).
2. Output video resolution: If my input/source file fills the entire screen when played in full screen, then I don't want my edited file to fill-up a much smaller area in the center of the screen with large black borders around it, and sometimes the loss of visual quality is huge. Again why can't they just do like-for-like? Windows Movie Maker is a swine for doing this.
3. Quick seeking on the timeline, ability to 'cut'/'split' video into pieces easily: Some programs are hard to quickly move through the timeline as the movie is playing in the preview area (I believe this is called seeking, I may be wrong). This can be usefull if you're trying to find a specific point in the video without blindly clicking the timeline at random. Sony Vegas 9's always gives me issues when trying to do this, by not allowing me to seek properly, or jumping my arrow to the start/end of a clip and I have to start seeking all over again.
Only the old Windows Movie Maker had 'cutting' correctly in my opinion, as it was an easy button to press on the preview window, instead of having to right-click the timeline at just the right spot, or go into the File,Edit,View menus every time you want to cut a part of the video.
4. Ability to separate audio track and manipulate it: I have a downloaded video, and something is seriously wrong with the audio. Not only is it out of sync with the video (which in itself I could probably fix with some faffing around), but it's also decreased in speed. Media Player Classic lets me increase the speed again, but there is no way to save the audio track as such, and I haven't found any other audio/video editing software that would let me increase the speed of the audio.
I am planning to get a new computer soon and would like to securely overwrite the information from deteted files. I tries using Eraser, but I get a message saying I need to run as administrator, even after I run it as administrator. I think it doesn't work with Windows 8.1. Is there a tool that I can use that will overwrite information about already-deleted files, including the filenames?
Background: I have been using windows since 3.11 when I was in second grade and we got rid of our DOS box. I consider myself a proficient user to highly proficient user, having built 4 of my own machines. I have installed Office 2010 Professional and the program works.
Setup: Lenovo ideapad y500 purchased January 2013 with Windows 8
Problem: Windows will not allow me to set Word 2010 as my default program for opening .docx or other valid formats. I can open the documents from within the program, just not by default.
Steps Taken:
1) Right-click file > choose default program > Word 2010 not available > browse for and specify location > set program to default. Result = System Message "This app can't run on your pc."
2) Consulted Microsoft support site to search for solution. Same result.
Desired Resolution: how to set that default application. All of you who read this are also annoyed with Microsoft's awful customer service.
In windows 8.1, I installed the Lenovo Power Manager which is not yet available for this system, and I did it running it in compatibility mode, as described in the next link
Lenovo forums : Lenovo Power Manager in Windows 8 - Page 3 - Lenovo Community
and it got installed correctly, and seemed to work asking for a reboot that I did
The problem: I run into a BSOD and I believe it is due to this software (safe mode works ok)
So, as I try to unistall, and the uninstaller is called from "ADD or REMOVE PROGRAMS", all I get is again the message: "Warning : Cannot run on this system"
And of course, here there is not compatibility mode wizard .. How can I complete uninstall and clear this?
I have a recovery partition and use it quite often if I encounter any problems which are very few.
I use CuteFTP to upload to a server but like all the programs, when I do a recovery the software is lost as well and I have to do a reinstall of them including CuteFTP.
There is only a certain amount of times that the program can be activated, (obviously to stop it being installed on multiple pc's), which is where my problems lay.
I want to install the program on a second internal hard drive or on an external hard drive so it doesn't get removed when I do a system recovery. What I don't know is how do I link to CuteFTP after the recovery has completed.
So to sum up, how to link to a program previously installed on other than the C: drive ?
Any way to automate program installation? For example if I have a fresh install of windows 8 and I have the installer for ccleaner, AVG and malwarebytes. Is there a way for me to take those .exe files and automate the entire installation process? I heard AutoHotkey might be able to do this but have not returned many search results.
I'm trying to uninstall Acronis Disk Director 11 Home but it will not uninstall.
I go to add/remove programs, select it in the list and click uninstall. That window comes up and says please wait while Windows configures etc. etc. then it just disappears and nothing happens. The program doesn't uninstall.
I've never had this problem with any other software before...what gives? How can I get Windows to uninstall it? Should I use something like this? [Solved]Acronis Disk Director 11 Home Build 11.0.2121 Completely Uninstalled or is that spyware/viruses/unnecessary?
I have some old XP graphics software that I need to run every few days. The problem is that it automatically goes full screen at start up and here is no way to reduce it.
When the software was written 4:3 monitors were all there was, so going full screen was fine. But, now with a 16:9 monitor it stretches everything and makes stuff very difficult to make sense of.
I am looking for something that will run the XP stuff in it's own work space so I can adjust the size of that window and in return, adjust the graphics size and shape back to 4:3.
I tried using Virtual-PCs like VMWare Player and VirtualBox but they both seem overkill and made the software run very slow as I had to use my old copy of win98 as the Guest OS. I can't afford to buy a copy of XP or win7 to use as a Guest.
I have been using a program called Family Tree Legends for years now, but just recently when I try to open the program I receive the following message: "This program has been damaged, possibly by a bad sector of the hard drive or a virus. Please reinstall it." I have removed the program and reinstalled it several times and it still won't work. It's a family tree program that I used almost daily and now I'm concerned I lost everything. I even tried to open the program via the administrator function but it still won't work.
I am having trouble trying to find out how to keep adobe file showing on top of program in use.
As an example, I use an on line portal for my work and when I click on the program button to view an invoice it opens in an adobe file but then stays behind the program screen, I then have to go to the task bar to bring it to the front so it can be printed.
For long time now I have been using the below program for my web designing and it has worked perfectly up to and including Windows 7. I just got a Windows 8 laptop and now the program crashes or hangs whenever I start to type I get maybe 1 or 2 characters out and then it hangs.
I saw a similar post in the Win 7 forum but there was no final answer or solution and it was posted quite some time ago. The only response to the user was to check the Event Viewer. So I tried that and the below is what I got back but unsure what to do with this info.
I am using a now no longer supported version of this program I even tried mailing them and they refuse to do any sort of update. So the software people won't do anything to try and resolve this issue so that is why I am hoping I can fix the issue. And the newer version stinks so refuse to use the newer version.
I'm running windows 8 x64 and when I open 'Programs and Features' to uninstall a program, the 'Uninstall' button that is usually next to the 'Organize' button is missing. Also when I try to right click on most programs and left click the 'Uninstall' option, I get the message "An error occurred while trying to uninstall X. It may have already been uninstalled. Would you like to remove X from the Programs and Features list?" However, those programs have not been uninstalled.
I've installed Quicken 2004 on Windows 8.1 in compatibility mode for Windows XP 3 to run as administrator. Everything seems to work well. All my data appears to have been restored including Home Inventory. I can download bank data.
Automatic backup works. I tested this by changing the system date to trigger the backup.
The infuriating thing is I cannot do a manual backup from the file menu. The dialogue box opens. I can complete the relevant fields but when I click OK the program freezes. There are no error messages.
Not sure if this is a Windows issue e.g. permissions or Quicken issue e.g looking for a file that doesn't exist. I have checked the 'Ready for archive' box of the folders, sub-folders, and files property boxes.
Are there any settings in Win 8.1 that I need to change to allow a program to write to a drive when it is running in compatibility mode for Windows XP 3 as administrator?
I am unable to run install program for realplaver 16. I get the error message "This app can't run on your PC" However the Windows Eight compatible website says that it is!
Is there a app or a website or something that can send large files?
So I have about a dozen files that I want to send to a friend in another state. Ranging from about 100 MB to 5 GB. The total of all the files together is roughly 26 GB. One Drive won't let me upload anything over 4 GB. Plus it takes forever.
What I can use to send all these files?
I was looking into this. I don't know how good it is though: Firedrive | Free Cloud Storage for Everyone
Trying to find a decent program to create a DVD from rips / downloads of movies such as MP4 / MKV etc is a pain --there's the PAID for version CONVERTXTODVD but a good one is the FREE Linux program DEVEDE (works on .RPM distros (Opensuse, fedora etc) and there's also a version for DEBIAN/LINUX MINT and UBUNTU. The created DVD will play DVD's in stand alone DVD players.
Read the documentation as it's a little bit confusing -- also ensure you have the FFMPEG package installed and either MKISOFS or the CDR-TOOLS (or any other package that contains the mkisofs library). Ignore any missing dependencies when installing using your package manager - it's usually looking for mkisofs which is often incorporated into other libraries --it works OK.
Program will add subtitles too if you want it and you can adjust the disk usage (quality will adjust to the amount of DVD space you use.
Works either on a Linux HOST or a Virtual machine - I'm testing mine on a "Portable Linux" booted up on a USB3 thumb drive.
Here's how to use the program -- the link refers to UBUNTU but the program is the same on other distros too.
I'm trying to delete the games listed here in my start menu programs list:
I've read online that you should be able to delete them by going into the program files folder for "Wildtangent games" but the problem is that I ACCIDENTALLY DELETED THAT FOLDER PERMANENTLY, so now when I click on "open file location" I get this games window that I cant do anything with:
I already tried re-installing wildtangent games to see if that would somehow re-instate access to these games' files in program files, but to no avail.
Is there still some way to make it so they dont show up?
I am running a Win 7 OS on an SSD and I have some programs installed on a different hard drive. And I want to move this program files folder on the same hard drive but different partition. Is it possible to do this without breaking the program links?
So there's my start screen and as you can see, the only program that is not Windows' built-in is Skype but actually I've installed several programs. The problem is, the installed programs don't appear on the start screen, like what windows 8.0 did. They showed on the app screen. My windows is MSDN 8.1 Pro.
How to set all installed programs to appear on start screen?
