Why Does Windows Firewall Say Public Networks Connected?
Mar 18, 2011
Why does it say "Connected" next to "Public Networks" in my Windows Firewall page when in fact my computer does not show it is connected to any network at all? Why is Windows Firewall telling me I am connected but all the other relevant notifications in my computer say that I am not connected?
Even when I disable all my network connections and turn off Windows Firewall, the Windows Firewall page still says I am "Connected".
(This is on a brand new computer -- just a few days old -- with Windows 7, 64-bit.)
View 9 Replies
ADVERTISEMENT
Oct 11, 2011
I am running an hp g4 notebook with windows 7 64 bit. I can connect to my home network just fine, but I am unable to connect to any public network. The networks show that the connections are available, but when I try to connect I either get a cannot connect error or connected but with no internet error. I have updated the driver for my wireless adapter (Broadcom 4313GN 802.11b/g/n 1x1 wi-fi) and tried resetting the winsock, dv4 and dv6 in ipconfig. No luck with either. The networks show as open.
View 2 Replies
View Related
Nov 30, 2009
I am trying to connect to a home group in windows 7; However it says I must set my network to a public network on both computers first. I don't know what I am missing - but I am unable to find where to do this. If anyone can help by providing step by step on how to adjust my home network to 'public' - I am sure it something easy, but I just can't seem to find it.
View 7 Replies
View Related
Apr 2, 2010
How to Set Unidentified Networks to be a Private or Public Network Location ?
View 0 Replies
View Related
Mar 10, 2012
Recently I've been experiencing some painfully slow internet browsing and downloading speeds on my Sony Vaio VPCSE, it's basically not possible to use internet because of this. These problems first occurred about a week ago and came from nowhere. So far I've tried to connect to three different public WiFis and it seems like there's something wrong with the network card or internet settings on my computer as these problems show up regardless of wifi. I have been browsing the web for a solution to this and tried quite a few different things in order to get it fixed but so far nothing has helped.
View 6 Replies
View Related
Mar 28, 2012
I have two network cards in my PC. One of them connects to the internet while the other connects to my home network.
The issue is enabling public folders for the home network in "Network and Sharing Center" enables public folders for the public network also. In other words Windows grants permission to people on the internet to access my c:usersPublic folder.
Disabling public folders under public network settings disables public folders for the home network also, preventing people on my local area network from accessing my PC.
[URL]
In other words Windows grants permission to people on the internet to access my c:usersPublic folder.
View 4 Replies
View Related
Jan 3, 2012
Recently had a virus infection and noticed that the windows firewall service is missing. When trying to reset to recommended settings by using control panel received error code 0x80070424. Cannot access other computers or shared files/folders on home network. Saw a previous post dated 12-17 that appears to be the same problem.
View 14 Replies
View Related
Mar 4, 2009
I've recently installed Windows 7 Ultimate x64 Beta Build 7000 and I have Comodo Firewall 3.8.65951.477 64-Bit installed as my firewall. I get this problem that I can't solve at all .
When I click on " Run Diagnostics" I have this :
Indeed, I click "Yes" and this is what comes next :
PS : The Windows 7 Firewall is desactivated!
Anybody haves an idea on this problem, please ?
View 8 Replies
View Related
Feb 22, 2011
i have a brand new toshiba laptop connected wirelessly. however it keeps showing connected however no internet access.i have a notebook as well that is brand new and it connects no problems what so ever.im using windows 7 home premium and 64 bit os.
View 1 Replies
View Related
Dec 1, 2008
Microsoft has released Windows7 Ultimate beta 1 (build 7077) to the public in both 32 and 64 bit.......Go get em crew!
You can access the Microsoft database from this link if you like or go direct.
http://www.microsoft.com/windows/windows-7/beta-download.aspx
View 0 Replies
View Related
Jan 31, 2013
I am using the method suggested in the Windows 7 Inside and Out book to relocate my user files. All seemed to be fine until I attempt to relocate the 'public music, public pictures, and others' files. The 'location' tab of properties of each public folder will not allow/accept changes to the files address.
Is there something different about the 'public' I need to be aware of?
View 1 Replies
View Related
Jun 13, 2011
Under "Advanced sharing settings", one can really turn off a lot of network sharing features to secure a computer.The "Public folder sharing" switch allows one to turn off Public folder sharing, but people logged on to "this" computer can still access these folders. Does anyone know if this means *remote* login? If so, is there a way to deactivate this so that it is only accessible at the "console"? And by Public folder, does that mean a folder that is user-specific (and controlled by owning user), but open to the public? Or does it mean a file space "commons", accessible and controlled by all users?The "Password protected sharing" switch allows one to restrict access to the computer to only those who have an account and password on the computer. Again, is there a way to ensure that access is only possible from the console?
View 7 Replies
View Related
Jan 24, 2012
I posted a reply on a similar topic but figured I'd start a new thread even though it seems this has been discussed a lot.I have a verizon wireless cell access point I connect a w7hp pc to it and set it as a home network. I also have a nic in the same w7hp box connected to a local 10/100/1g switch with a bunch of other stuff on it, an xp pc, a ps3, a directtv dvr, and a majicjack. That's my home LAN.I'm letting the w7hp machine do the dhcp as part of internet connection sharing which mostly works fine. I had to hard set an ip address for the dvr. There's even a registry entry that you can control the dhcp local subnet.What I'm finding is that with windows 7 home premium even though you can share an internet connection there is no way to change an independent home LAN network to be a "home" location.
Because w7hp decides the home LAN is "unidentified" it won't let you change the type and it's stuck as a "public" network. So none of your home computers can talk to the windows 7 computer. They can use the internet but that's about it.here's a lot of fixes floating around but none seem to correctly fix the problem.It's not a problem if you have w7pro because you can edit the security settings forunidentified networks and let the admin change them. But I can't even find the security registry entries in w7hp.
View 1 Replies
View Related
Aug 6, 2011
I installed Avast AV when Norton expired. In order to activate the internet security stuff, I had to install the upgraded library file, blah, blah, blah. In order to do this, I had to show hidden folders. Having only recently begun my foray into Windows 7 (coming from XP), I was flying a bit blind. I must have hit the wrong thing. After I was able to see hidden folders, install the library file to Avast and continue on with the reboot, the desktop came up wiped clean of my documents/pics, etc and my C:\Users\Susan folder has disappeared and is now called Public. Next, I thought I may have switched my user from Susan to Public, but I have not.
View 1 Replies
View Related
May 8, 2012
We moved our offices from one location to another over the weekend. New ISP but everything else is the same.Have a peer-to-peer network with one pc (Windows 7 Professional) acting as the file server. Everyone now has access to internet and we can all "see" each other.For some reason now when we want to connect to Public Folders on our "file server" it is asking for login credentials such as username and password. I have it set to not require a password since we have a mixed environment.It has always worked in the past and I am not sure why it would be requiring that now. I had read somewhere to try and setup an admin username and password that was the same for both computers. I tried that and it was still unsuccessful (Although I still have it set to not require a password).
View 6 Replies
View Related
Nov 12, 2008
I just noticed this that when you open the network from the desktop it says its not connected but when you click on the network icon in the taskbar it says its connected is anyone else having this problem.
View 3 Replies
View Related
Apr 9, 2012
I can�t get online. Icon in taskbar says I don�t have a network connection. Upon exploring, I find that Windows 7 Pro has me setup for a �public network��which has a yellow exclamation mark on the left side between my PC and the network, and a red X on the right side between the network and the Internet.
DETAILS:Dell desktop PC. Was running Windows 7 Home, now running Windows 7 Pro (full install; not upgrade). I had a malware problem (images on webpages and links, etc. were not visible to me) with W7Home; cleaned it and went to W7Pro. However, now I have this whole new and far worse problem with W7Pro. (See �problem� above.) NOTE: I am the only person in my house and the only person using the computer. So I never had it set up for a network. I only own the desktop PC and don�t need a network. The �network� that is now set up on my computer was set up by W7Pro by itself as part of the problem. My IP is not static so I can�t input my IP manually�it�s set to automatically detect. Called cable modem service provider; they made the assumption my operating system came with my PC and told me to call Dell for support. When I explained my OS didn�t come with the PC, they then said �You need to talk to Microsoft.� Uh---no. The cable modem service provider said their server is talking to my PC�my PC is unable to get to them. (Makes sense, as that matches the pictures I�m seeing with the exclamation mark and red X.)
View 9 Replies
View Related
Aug 23, 2012
I have Windows 7 home and have run into a bit of an issue. I have a program on my computer that runs through the internet. At my home, it connects fine and I am able to run it without any issues, but I go to school and connect to their WiFi and it stalls on the connecting prompt. Everything else I run and the internet works fine, I have re-installed the program and made sure it wasn't blocked from public access on firewall.
View 1 Replies
View Related
Apr 19, 2011
my connection to my work's wireless network was fine.
Last night, I installed driver software for my network card for my Ubuntu OS (dual-boot machine). Ubuntu and W7 are on separate partitions; I am not running Ubuntu inside of Windows. This morning when I came into work and booted into windows, it did not connect to the network. I have already updated the driver software through device manager (I already had the most current driver installed) and have downloaded the correct drivers from Dell's website.
I have also done a system restore to prior to last night's Ubuntu driver update. And that didn't work. At this point, I am connected via cable, but if I remove it, my wireless card will not see our wireless network. I have tried to manually create our network through the "Set up a new connection or network" with the correct SSID and security code, but that did not work either.
How could my work on the Ubuntu side have affected the performance of my network card or settings on my Windows 7 side? I can connect to a wireless network in Windows?
View 2 Replies
View Related
Dec 20, 2012
I turned on my Windows 7 comp yesterday and my wired (into the ADSL wireless router) local area connection is stating its unidentified.
1. Hard Reset the Router and Modem
2. Tried installing new protocols through the adaptor settings.
3. Tried updating the realtek drivers
4. Tried uninstalling the LAN and reinstalling
5. Tried stopping and starting Bonjour.
6. I added a USB wireless dongle and this ALSO says it is an unidentified network.
View 1 Replies
View Related
Nov 19, 2011
For the past few weeks I have been having problems with my HP laptop.
For starters my laptop will not restart. I try to restart it and it shuts down, but won't reboot all of the way. It gets stuck on the black screen you get just before the HP sceens comes up. So I have to press the power button ( after which I do, I get a loud POP sound before the computer shuts off ) and then turn it on again myself. Also, if my computer goes in to sleep mode due to inactivity, it will not wake up. I have to press the power button to turn it off, and then start it up again.
After this happens, my laptop cannot detect any networks. I have to unplug the charger, and then I have to take out the battery and put it back in before it detects networks.
I took it to best buy ( where I bought the computer and have a warranty at ) and they did a diagnostic test and determined that I had several viruses causing the problems. After paying 200 bucks they ''fixed'' my computer and I brought it home, only to have the same exact problems I was having before.
View 3 Replies
View Related
Mar 6, 2011
Windows 7 does not remember/save wireless networks even though I check "connect automatically" when I connect. In the Manage Wireless Networks control panel ONLY the current wireless network I connected to is ever listed. If I connect to another wireless network then that previous network is gone from the list.
P.S. - I'm running Windows 7 Professional 64-bit
View 1 Replies
View Related
Dec 1, 2008
In this tutorial I will show you how to detect wireless networks in Windows 7 and how to connect to them. As you will see, the procedure is very simple and requires very few steps. On the right side of the taskbar, you will see a wireless network icon like the one below. Click on it.
View 0 Replies
View Related
Aug 17, 2011
My problem is that I work in a school and we have bought 22x Samsung N145 Plus Netbooks. They use Atheros AR9285 wireless cards and I'm having problems connecting them successfully under Windows 7 to my D-Link access point. The fact is that the security has been set to WPA, using AES. The laptops are the same and are connecting, but 9 times out of 10 they pick up an autoconfiguration IP of 169.x.x.x.I sometimes get one working, but never have more than one connect at the same time. I need it to just pick up my 'chads.internal' domain network but it rarely does it successfully. I've tried adding the settings manually, I've tried 3 different network card drivers for WLAN (latest out from the Atheros homepage, second latest as requested to be tried by Samsung tech support, and a version 8.x.x.x driver after reading that 9.x.x.x drivers are 'flaky'), 2 different wireless access points, and the next step that I'm trying is to see if Windows XP will connect!!! I really don't want to have to go down that route!
View 1 Replies
View Related
Dec 26, 2009
My LAN (local area connection) is automatically on a Public network, I'm not sure why or if its always been like this. My Broadband is on home. I cant change the LAN to home. A message popped up and said something along the lines of "this network has too many internet connections".
I'm wondering what it means if my unidentified network is public and if there is anyway to change it to home?
View 9 Replies
View Related
Nov 4, 2011
I've been fiddling like mad for a couple of days now with a new Win7 Ultimate x64 machine "desktop", and using an old XP Pro machine as a fileserver, the last few hours getting the XP machine, which is rather old, to respond to Wake On LAN. I've been trying to track down why the DSL router is triggering it from standby mode, so I swapped to an older router than my usual one to see if it causes the same problem.Suddenly, the Win7 machine has decided it's found a "new network" and called it the exciting moniker "network 3". I don't want a new network. I am quite happy with the old one. I cannot find anywhere in the baffling wizards etc to tell it which network I am on. It just seems to be an arbitrary decision by Win 7. It seemed to happen a while after I unplugged the DSL side of the router from the phone line, to see if it was stuff coming in from the internet waking the server, but it didn't happen immediately, so I have no idea why Win 7 suddenly decided it had found a "new" network. All the IP addresses (static) are the same, etc.
Every version of Windows seems to get more opaque and designed to prevent anyone getting "under the hood" to see what is actually going on. How do I get under the hood to delete this network that I do not want that is precisely the same computers as the old one? If I plug in another different router some time, do I get yet another "new" network? Is there somewhere I can delete these networks? From the command line perhaps? I can find a "set up a new network" link in the Network And Sharing Center, but "get rid of this one you didn't want" doesn't seem to appear, for some reason.
View 2 Replies
View Related
Dec 1, 2008
Hidden wireless networks are those networks which do not broadcast their Network ID (SSID). While not that many people use such networks, it definitely ads a bit more security to have your home wireless network hidden from unwanted guests. In this guide I will share with you what details you need to know in order to connect to such networks and what are the steps for making a successful connection.
View 0 Replies
View Related
Jun 8, 2011
I had a network with 2x Win Vista PC's, 1x Win XP PC, and a shared printer. I replaced the Win XP PC with a new Win 7 PC. Now the 2x Win Vista PC are on separate networks: Network 2 & Network 3. The Vista Network 2 PC can no longer see or use the printer, which is cable attached to the Network 3 Vista PC. Seems like the Win 7 installed new, separate networks for the existing Vista PC's. The network hardware is: Comcast modem > Dynex router > Cisco ethernet switch > 3 PC's. I did not change any network connections, hardware or software on the Vista PC's. I simply removed the Win XP PC, and replaced it with Win 7 PC on that network cable.
View 2 Replies
View Related
Sep 18, 2011
I am having a wireless issue on my laptop. I have had my connections in the two locations for months now. One network was recently upgraded to another router and the other network router was reset. I am at the location where the router was reset. My available networks are showing and are in excellent strength but whenever I hit "connect",nothing happens.I don't even get a prompt to enter the passcode. I even tried to connect at my local library's wifi with no such luck. When I run diagnostics it keeps saying "None of the networks you have previously connected to are in range"?? My drivers are up to date. I am a novice when it comes to computers so I really need help on this one. Just tell me what is needed in terms that I can understand (again, I am not that computer savvy,lol) and I will provide them. I am running on a 32bit and my laptop is a HP. The router is a Broadcom 4313 802.11b/g/n
View 1 Replies
View Related
Feb 17, 2012
i just formatted and reinstalled windows 7. wireless internet was working perfectly fine before, however after reinstalling windows 7 my bluetooth network adapter is not able to detect any signals. i attempted troubleshooting and it said to connect a ethernet cable. i did notice in device manager in "other devices" theres a device "network controller" that isn't installed. i'm not able to cuz i can't access the internet with that laptop.
View 5 Replies
View Related
May 4, 2012
I am having a problem connecting to the internet in a public library where all other laptop users are connecting successfully. The curious part of the connectivity issue (to me, anyway) is that according to my computer I AM connected to the network. I have provided some screen caps of the issue (links below), and tried to run the Intel ProSet Wireless Tools diagnostic to troubleshoot the problem of connectivity. The test run by my computer indicated that my Ping Test failed Response: Default Gateway, DHCP server No Response.
View 3 Replies
View Related
