OK so sometimes my video card will display the video to the monitor when i boot up my pc but most times than not it will not display it.
If it dosn't then i have to reboot repeatedly until it does. I have already attempted to fix this issue by reseating my video card and that did not work at all.
This issue is really annoying and can take 10-15mins of time to get it to boot up.
Mysteriously, the audiodg.exe service seems not to run in the active processes as a result of which I could get sound. When I try to run the process through new task option , it loads up and immediately disappears.What do I do? Other audio services and everything seems fine. It used to run on same machine with the process on.
View 4 Replies View RelatedThe Intel(R) 82579LM Gigabit Network adapter works about 40% of the time. The other 60% it says there is a hardware issue and it cannot connect. I then generally fiddle around with the ethernet cable ie unplug it plug it back in move it around again and restart. This sometimes works and I have no problems. Then when I restart my computer its a whole game on whether I can get it working again or not.
I have the latest drivers, and it is not a firewall/security issue.
It plays about the first 5 minutes of a video pretty well, but then it stutters...Stops n goes... Windows 7, wmp 11 i think, on the gateway n72 laptop.Upgrade to wmp n/a... May it be that i need a service pack to windows 7?
View 5 Replies View RelatedI am desperate! I recently installed windows 7 Ultimate 32 bit on my DEll Machine's. It has and add on DVI video Card Silicone Image model SIL1364 ADD N-2 I have looked everywhere including under the sofa and cannot find a driver for this card. I went to the Silicone Image site and it appears they don't make the cards or support it. From their site they very vaguely send me to Intel where I found nothing. I have 4 machines all with the same add on card.
View 4 Replies View RelatedI am trying to take some training videos at a website [URL]. The videos are in windows media player format embedded in IE. I selected 4 trainings. So these are in my favorite list. I launched the first video, a new window opened and it started buffering the video and then the video started. I face a problem when I closed this video and wanted to go to the next one. A new window opens with windows media player embedded in the window but it doesn't do buffering to play. Interestingly, it still showing the title of the previous training that I closed. Looks like it is getting stuck in the memory. I am using IE 9 on Win7 (64bit).
View 3 Replies View RelatedI just recently upgraded Windows 7 Ultimate from Vista Home premium. When I "upgraded" though I chose to completly reinstall my OS.Anyways I used to have transparency, but when I try to get that same effect it says "The current video card may support Aero with a driver that is compliant with the Windows Display Driver Model (WDDM). Contact the manufacturer of your computer or video card for a WDDM-compatible driver."and then when I try to troubleshoot it says "Video card driver doesn't support Aero effects" . I've tried the "Fix it" options, but that doesnt work. I just don't see how transperancy would work on vista but not with windows 7... do I seriously have to purchase a new video card?
View 9 Replies View RelatedWindows Doesnt recognize my video card Ati radeon 5650 HD, it just says stantard video card for windows, neither my monitor its recognice....
I installed the driver many times , My pc is SONY VAIO Vpcef2s1e , i even downloaded the driver from sony site and still doesnt work...
My windwos is URALSOFT WINDOWS 7 ULTIMATE x64
I own a Dell Inspiron N5010(service code 8ypspp1). I installed all drivers, but when i enter lets say solitaire it says that either hardware acceleration is disabled either my video card doesn't support it. I checked if h.acceleration was turned on and it was. My graphics card apears to be : Standard VGA Graphics Adaptor. I installed java , flash , directx...This happened after i reinstalled windows and format.
View 3 Replies View RelatedI have installed windows 7 in C: drive and after than i installed windows Xp in D: drive.But now when i start my computer it automatically start windows Xp.in the C: i searched for the boot.ini it was windows xp written there also.
View 2 Replies View RelatedI've been having problems with Facebook for the past few days. It loads erratically in both Firefox and Chrome but it doesn't seem to have any problem loading in IE.
View 2 Replies View RelatedI got a problem with dual booting, I first installed windows 7 and right after that I install xp on a different partition. But now it only loads up xp? I cant chose which one I want to start. Pressed my computer and properties but there isn't any windows 7 only windows xp?
View 3 Replies View RelatedRan my Uniblue application to update drivers; after that cannot run mouse or keyboard once Windows loads (I have tried different USB ports--none seem to work).
View 1 Replies View RelatedToday I clicked on Internet Explorer and tried a Google Search. I only did one left-click of my mouse each time.Multple windows appeared and continued to propagate non-stop, until I closed all windows. Does anyone know what could be causing that? I know that I could do a restore to yesterday and the problem would probably go away, but I would like to know the cause of it.
View 7 Replies View RelatedI'm getting an inconsistant BSOD just after my desktop loads from a bootup. Meaning, sometimes it BSODs and sometimes not. I read the minidump everytime and it shows the same information. This is what it shows.
PAGE_FAULT_IN_NONPAGED_AREA
Caused by driver: win32k.sys
Caused by address: win32k.sys+2517af
Crash address: ntoskrnl.exe+7cc40
I just ran a Chkdsk /r but nothing was found. I'm thinking it may be a memory error?
With mouse in the middle and cannot go any further.
View 7 Replies View RelatedMy computer BSODs at random times usually whenever I load Star Wars: The Old Republic. At first I thought it was overheating, but I have changed my cooling and it is still doing the same thing.
View 1 Replies View RelatedI am running: Windows 7 64bit
On: Acer Aspire 5750 laptop
For a couple months my computer has been locking up at random intervals for several seconds each time. I got no error messages and each time it came back acting fine, so I just assumed I had too much running. Now, I'm not so sure it wasn't the HD failing, because...
Last week, I noticed the shield on the shutdown button indicating windows needed to run an update. I closed out of everything and pushed the button to shutdown/install updates. The computer immediately crashed almost as if I had held down the power button. When I attempted to restart it, my only 2 options were to start normally or launch repair mode. Normal didn't work, so I launched repair. Repair ran for close to 4 days. In the first 36 hours it asked to be restarted twice, after that it just kept running until finally I gave up and shut it down with the power button.
Like a moron, I do not have a recent backup of my files and really wish they could still be saved.
Since then:Tried to rescue files with Umbutu boot stick- error said it could not mount to drive. Tried to launch safe mode with command prompt via F8- system went back into repair mode instead. Tried to launch to last known good configuration via F8- system went back to repair mode, again. Tried to launch via Windows Boot Disk- the screen it gave me was not the same screen as the screenshots on the forums suggested I should get. My screen was an Acer logo with 3 options, but only 2 I could chose and both promised to wipe my data. One was to repair windows and the other was to replace it. I chose neither in an effort to not loose my data. From other peoples screen shots it looks like this disk should give me many more options, including one for command prompt. Tried Windows boot disk again, disk would not load this time. Now I'm stuck! How can I check for HD failure if I can't get a command prompt or OS? It seems like everything I try goes right back into the same repair mode that ran for 4 days and did nothing good and forces me to shut down with power button despite how bad that is to do.
Last week I tried to install IE9 after some annoying pop-ups. The installation got interrupted somehow. I didn't care about that because I would never use that browser anyway.
Soon I realised I was not able to use Windows Live Messenger anylonger. After logging in, an error occurs: "Can't find ordinal 379 in DLL-files iertutil.dll" (translated from dutch, so it could be a little different in English). After this error, msn closes directly. I did some research and I read I could fix this problem by editing some internetoptions in the control panel. But when I click on internetoptions, nothing happens.
MSN isn't the only application giving this error. I experienced the same error in some other applications like paint.NET.
Also, I can't open VMWare anylonger. It runs in processes but on screen nothing happens. Skype closes directly after crashing, WOW won't start anylonger,... These are just some of the problems I experienced in the last 6 days.
I get this icon when I restart the PC but I have no idea what it is , can't point the curser at it while the page loads .
View 2 Replies View RelatedI'm new to startup repair and not sure of what it is actually doing but when i start my laptop i get a choice of start windows normally or startup and repair. If i click start windows normally it loads as normal but then i get black screen and the mouse nothing else. When i choose startup repair its attempting repairs and not getting any further.
View 1 Replies View RelatedI have a home build pc msi mother board p45 neo, 2gb corsair ram, nvida geforce 9800, wd 400 hd & WD 160. After I shut down and restarted PC it states windows is staring but never loads.I tried to go in safe mode trying all their options but nothing happens, I can not go into safe mode.I also tried booting from the cd but still it will not load.
I have search several internet boards and have tried everything, so while searching the boards from another computer it finally went into the option for sytem restore or repair I hit system repair and it ran thru a few things and i neglected to copy down the results but i believe it said something about boot config error. hit repair I hit repair and it said to click finish and restart still nothing.
I'm setting up my system drive with 3 operating systems:
1) Windows 7 64 bit (for home use)
2) Win XP (for legacy programs)
3) Windows 7 64 bit (for work use)
...in that order on the hard drive. Rather than using Windows own boot manager, I'm using the open source GAG boot manager (which, like lots of third party boot managers, runs before any OS loads so you can pick which OS to run - and then hides the other OS's and their entire partitions until you reboot.) I've done this sort of thing with multiple WinXP loads before, no issues. In fact, this very hard disk used to have three WinXp loads on it (in position 1 and 3 above). I formatted those partitions and replaced them with the Win7 loads, which is when the problem started.Everything worked fine until I added the SECOND load of Win 7 (third on the hard drive, as above). It installs properly, but when I try to run it, it hangs on the "Starting Windows..." screen (and the spinning windows logo just stays spinning infinitely).if I then immediately reboot and run the FIRST load of Windows 7 (which was hidden, worked fine before, and lives on its own separate partition), I get a screen right away saying a problem happened last time I ran it! Which isn't true - the problem happened when I just ran the SECOND load of Windows 7, not the first! Remember, these Win7 loads are totally separate. But for some reason, it thinks there was a problem. It even asks me if I want to enter repair mode. Spooky...Anyway, I do NOT choose to repair and instead just say "run normally". And everything then boots fine. (Of course!) And sure enough, if I shut down and simply choose to run that same first load of Win7 a second time, it again works with no problems reported. BUT... if I then proceed to run the SECOND load of Windows 7, it again hangs on the "Starting Windows..." screen, and - you guessed it - if then try to run the FIRST copy of Win7, it will again report it had a problem last time it was loaded. Which starts the whole thing over again....
I built my PC in november of 2010. These are the components:Motherboard - ASRock M3A770DE AM3 AMD 770 ATX AMD MotherboardHard drive - Western Digital Caviar Blue WD2500AAKS 250GB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive -Bare Driveprocessor - AMD Athlon II X3 440 Rana 3.0GHz Socket AM3 95W Triple-Core Desktop Processor ADX440WFGIBOXgraphics - PNY VCGGTX570XPB GeForce GTX 570 (Fermi) 1280MB 320-bit GDDR5 PCI Express 2.0 x16 HDCP Ready SLI Support Video Cardpower supply - 1 x Rosewill LIGHTNING Series LIGHTNING-1000 1000WATX12V/EPS12V 80 PLUS GOLD Certified Modular Active-PFC Power Supplymemory - 2 x Crucial 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10600) Desktop Memory Model CT2KIT51264BA1339The monitor is a 1920 x 1080 LED 23 inch monitorI just bought windows 7 from best buy and I installed it and it was working just fine until I installed the drivers that came with the motherboard. After I installed the drivers and rebooted the computer it would load to a black screen and stay black. I get a windows 7 logo and a progress bar and then the screen goes black right when it is supposed to go to a login screen. I decided to reinstall the operating system again and after the second install it worked fine until I installed the drivers for the graphics card.
View 7 Replies View RelatedI have recently started having trouble booting Windows 7 on my fairly new Gateway PC. When I power on the computer it loads up to the Windows Desktop and the task bar appears like it normally does, but the computer keeps loading as if the desktop icons would pop up in just a few seconds, except they never do. I've let it sit and load for hours and nothing comes up. I can't click on the start menu and the Ctrl+Alt+Del doesn't work so I have no choice but to do a hard reboot with the power button, which I hate since it can't be good for the PC. Sometimes it does this multiple times in a row, and sometimes it starts right up and loads like normal with everything working.I have ran complete scans in both safe mode and running regular Windows to no avail. I used Avast, Mcafee, and Malwarebytes Anti-Malware in both modes. I don't run any of them at the same time, however and I will disable one while I run the other. I've been working hard to keep this computer safe so I don't download anything suspicious and I use it mainly for gaming.
Gateway DX4860-UR11P
Intel i7-2600 3.4Ghz
16GB DDR3 1600MHz Ram
2TB HDD
Nvidia GTX 580 3072MB
DVD-R/W
LG Blu-Ray BD-RW
I opened up my PC to move the front audio cable so that it wasn't sitting on the graphics card (was causing EM interference).When I tried to reboot, my computer now gets to the windows loading screen, then stops outputting video - so the monitor goes blank and eventually turns off. Windows continues to load in the background as I can hear the startup sound play.
Computer Setup:
Gigabyte GA-EX38-DS4 Motherboard
Intel Core 2 Duo E8400 CPU
Gigabyte 670 GTX Factory OC GFX Card
4GB RAM (I think XMS2)
500GB Samsung Spinpoint F3 7200rpm HDD
Corsair 650W modular PSU
Linksys PCIE wireless card (can't remember model)
Things I have tried:
1) Booting into safe mode (works fine, can view the desktop etc.)
2) Booting into low resolution mode (doesn't work, same issue)
3) Booting into safe mode, un-installing the graphics card, booting into normal mode and reinstalling drivers for graphics card (doesn't work, same issue)
4) Trying a different PCI-E slot (doesn't work, same issue)
5) Trying a different output on the graphics card (doesn't work, same issue)
6) Hard CMOS reset (doesn't work, same issue)
7) Trying a different graphics card (even worse, didn't get any video out even at BIOS screen - can't guarantee card is working as I don't have a second machine to test with but it was working the last time I used it a couple of months ago. Second card was ATI rather than Nvidia so shouldn't be using same drivers).
Things I intend to try but haven't had time:
1) Plugging into a different monitor (heard some people mentioning it may be to do with the monitor drivers not reporting max screen settings properly, I could find any windows 7 x64 drivers for my monitor as its so old but I do have a TV I can test with)
Running Windows 7 o/s. Internet Explorer now loads a "Blank Page". Have removed several malware which highjacked IE. Used Malwarebytes, CCleaner, Revouninstaller programs. Believed to have cleaned Registry correctly.
View 10 Replies View RelatedI am trialing Macrium Reflect because of its good reputation. I have a simple requirement. Backup to external hard drive (WD Passport), it is USB 2.0. Then use the Windows PE rescue CD to boot up and restore from external HDD. I have been researching this. I know about the lack of USB 3.0 support. But my drive is USB 2.0.
View 9 Replies View RelatedEvery time I make a new User and log in it loads up with a black screen and the task bar and says that the system as loaded the default profile. This even happens if I log on as the system admin. My original profile loads fine but nothing else. I think It may be because the folder that holds all the basic information to make a new user profile has been deleted from my Users folder. Is there anyway of fixing this? Prohapps a place where I can download and replace that folder? I am using windows 7 ultimate 64bit. System restore has already been tried but the folder was deleted too far back to recover by that method.
View 3 Replies View RelatedI have a weird situation: Just a normal day working on my pc while it messages me, system rebooting. It reboots without any errors. I log back into my system,everything seems fine. I notticed on my taskbar none of my applications loaded.Usually, MSN, my vid card, winamp...icons are loaded up and icons are in taskbar but not there! I performed many actions to no avail.System restore, safemode boot, selective services boot, sfc /scannow and so on.I checked in Event viewer and see 5-6 service that did not responde to the start or control in a timely fashion. Ex: acrobat, asus, bonjour, apple.... Got one I dint like: The server {06622D85-6856-4460-8DE1-A81921B41C4B} did not register with DCOM within the required timeout.When i click on any applications mostly non-MS apps nothing happens. Not even the services starts up in task man. I tried to open the service lets say, Steam client and get the Timeout error right away.
View 7 Replies View RelatedI 'm having problem installing windows 7. on new hardrive. Windows loads files, but freeze at windows starting.
View 3 Replies View Related