i have just installed windows 7 and downloaded a driver for my microsoft keyboard so my media buttons would work i got the driver from microsoft and after installed i was asked to restart. When i did my pc would nto boot up saying the cause was a recent software or driver change, however i can not even boot in safe mode to roll back driver.
View 3 RepliesI have a pc running windows 7 pro 64 bit, I received a update from windows and when the computer rebooted my monitor and key board will not work. I don't know what to do now, I can't even get it to boot in safe mode.
View 3 Replies View RelatedWhen I built this computer back in the dark ages of 2007, I set it up to dual-boot Vista and XP. Every time I powered on, I'd get a prompt to boot into Vista or "older version of Windows," meaning XP. I'd pick one and go on my merry way. In 2011, I formatted the Vista drive, installed Windows 7, and deleted the XP install since I had XP mode in 7 if I needed compatibility. No more dual-boot prompt. I had no issues until last night, when I went shopping for a new hard drive. My motherboard, a Gigabyte GA-P35-DS3L, was running an old BIOS that has problems with drives of 1 TB or more. So in order to be sure I could use the drive I'm buying, I updated the BIOS to the latest revision, using Gigabyte's @BIOS utility to do it in-OS rather than through the boot menu.
When I rebooted, the system POSTed fine. But instead of booting Windows, it gave me the old choice between Vista or the "older version of Windows" - despite neither of those operating systems being present. If I tell the boot manager to do anything, it spits out an error since it can't find any OS files it recognizes. The BIOS itself seems to be fine - I'm writing this on the affected computer, running Ubuntu with a Live CD. I can see all the hard drives, open files, etc. I just don't know how to get the boot manager pointed at Windows 7 again.
The short of it is that I reinstalled windows 7 HP, it booted up fine when no drivers were installed, I install drivers and it goes to starting windows, gets past it and just hangs on a black screen, no mouse, nothing.Tried using driver sweeper, removing everything and updating my drivers multiple different ways.This is a very new build, about 2 weeks old? Was completely fine until I installed a new CPU fan, but I don't see how that has much to do with it?ATi HD 7850 2GB is the card.
View 6 Replies View RelatedI updated the bios to the latest version on a gigabyte GA-Z68X-UD3H-B3, using @bios application in windows. I have two disks in a RAID1 All was working fine but upon boot i was getting a message about enabling ACHI. Stupidly curiousity got the better of me and I eventually I said Yes. The next time i turned off i couldn't boot to windows. I went into the bios and noticed that the SATA was set to ACHI, but the bios still saw my RAID volume set up and everything appeared Normal, so i changed this setting to RAID.
it still wouldn't boot to windows - giving some message about not having access to the drive. i tried using the windows install disk but that gives error messages about RECENV utility not working, use chkdsk. it does show a drive as a volume D: (not C: interestingly) I have tried running repair and that doesn't work. I have tried chkdsk/r and that didn't help. In fact that degraded the Raid so i had to rebuild it, and now that is running Normal.
I also can't see any of my restores when i use the install disk.
I don't want to do a reformat and start again as there is data on there that is newer than my last backup.
So the options i am considering
1. remove the disks - place one of them in an external usb case and try to extract the data to save it - not sure if this is possible? and then do a clean install or try the below.
2. can i go back to the previous bios version? is that just a case of power off everything and remove the CMOS battery? and power back on?
3. go through with a new install of win 7 but don't format the drive and see if it just corrects any bad files.
leptop is not suppoted wddm
View 1 Replies View RelatedMy problem is that i needs to define my graphic card card ATI Asus EAH4890 every time i log on windows 7 and i can't launch any game before i install the ATI CCC ATI Catalyst Driver. This problem effects of the Aero and every time i log on windows it will be disabled.
View 1 Replies View RelatedDriver updated d-link dsb-c310 for windows 7 32 bits system
View 1 Replies View RelatedIs there a bug if you boot up Win 7 with no keyboard attached?I have a special use computer using Win 7 on a touch screen and can do not allow a keyboard to be attached. The user is limited to touch screen only?
View 5 Replies View RelatedI booted up my desktop, it booted fine, then I restarted it because I wanted to cconfigure the BIOS. But couldnt get into the BIOS and my keyboard stopped working. My computer then brought up the black&white screen with two options:Startup repair and Start windows normally.I couldnt choose so it went to startup perair, now it tried startup repair the 20th time and my USB keyboard still isnt working.
View 3 Replies View RelatedI'm buying a new desktop and I am wondering if I can use this wireless keyboard and mouse during the first boot up (windows 7)Keyboard and mouse: [URL]
View 2 Replies View Relatedmy keyboard and mouse doesnt work when i boot my pc..but when i tried it again and again only my mouse will work but during startup repair it will not function again...whats the problem with my pc? is it the mouse and keyboard or its inside the cpu ?
View 9 Replies View RelatedSuddenly my Windows 7 dell XPS says Keyboard Failure during boot sequence. I can't "strike the F2 key to continue or F2 to run the settup utility" because the keyboard isn't recognized. I put in my windows system repair disk that I made few months ago, but still get the same error.I swap out the keyboard for another but still get the same error.
View 4 Replies View RelatedSo heres what happened. I was jailbreaking my ipod, and something went wrong.While I was doing the whole DFU thing a little pop-up notification showed up about installing new USB device. The Ipod rebooted and the computer froze.After I hit the reset button, everything starts loading and it get to the Win7 log in screen...... but the keyboard and mouse do not work.They work in BIOS. They are getting power, but if i unplug them and plug them back in while at the log in screen they dont get power any more. ( they light up, so when i replug them in... no pretty lights).So I tryed safe mode..... Can use keyboard to select boot options, but once win7 loads.... no go.Win7 CD ..... Keyboard and mouse work!!!! But it tells me that my CD is not compatable with this version.
View 1 Replies View Relatedthe boot manager always pop up, and i cant use my keyboard anymore. but when i press the f8 right after i start my laptop and simultenously press enter it works but when i need to use the keyboard it is not working again even the enter key.
View 3 Replies View RelatedI just replaced my old GA-Z77-DS3H motherboard with a new GA-EX58-UD5 and now after I boot my computer the keyboard and mouse stop working.
View 1 Replies View RelatedSo my keyboard and mouse are completely usable in the bios and during boot, but once the windows login screen opens up, there is a 30+ second delay before the keyboard and mouse become active. This doesn't appear to be a freeze or lag of any type, just like the keyboard and mouse hasn't been recognized yet. I have a printer and several external drives connected to my computer's USB ports, so I tried unplugging everything but the keyboard and mouse. The time goes down to about 5 seconds, however, the last few times I've tried, there was about a 10 second wait for the mouse to work after the keyboard worked. With only the mouse and keyboard plugged in, I feel this must be either 1) an issue with drivers loading or 2) a specific issue with my USB drivers. Here's what I've done so far to try and troubleshoot. Not sure what to do next.Used google (couldn't find anything that looked related enough to try)Unplugged everything but keyboard and mouse from USB ports - Decreased lag time to 5-15 secondsenabled boot logging, checked file for drivers not loading (attached)Checked bios for legacy USB enabled (it was)Double checked AV software (only MS Security Essentials and Malwarebytes installed, malwarebytes does not run any processes unless I start it up)Having multiple USB devices plugged in upon boot should not delay the usability of my keyboard and mouse.
View 1 Replies View Relatedtrying to recover from a system crash here.. One of the issues was me not being able to install/uninstall microsoft antivirus, since it seems some files were deleted which it needed. I tracked that issue to yet another issue what windows installer could not start, which suggested me to check if it was enables in Msservice.exe, which I couldn't start either.After some googling, I found a fix on MS website, which moved some dll around and asked me to reboot PC. After doing so, it stopped recognizing my keyboard and mouse (both usb) at the login screen, they are completely dead even thou they work on boot and in bios (and are detected in bios).I tried to restoring to the point before the "fix", but same issue.
View 8 Replies View RelatedI have this Samsung Notebook and after using it for certain time, the PC crashed giving DOS sounds. When I started the PC again, I was at the boot screen asking me to choose the OS. Although my keyboard didn't worked. Now my PC is somewhat a brick. How can I solve this issue? What's the best way to restart the keyboard?
View 3 Replies View RelatedEverytime I boot up the keyboard works for me to go to BIOS or Boot menu but once I get to the login page it stops working. I noticed that people are saying disable device signature enforcement or something but I can't find that in my BIOS. I have an Asus motherboard model - M4A88t -V
View 3 Replies View RelatedOn my home built system, when booting up, if I don't have this generic Dell usb keyboard hooked up, I can not choose from multiple drives I have installed with the Logitech G510 keyboard( which I use to choose, I just have to have this other keyboard connected). Other than that, it behaves normally, fine.Is there something I can do in the way of getting a driver onto a usb thumb drive and then keep that thumb drive permanently attached (like inside the case)?
View 4 Replies View RelatedMy Acer Aspire 5820tz laptop will not work. The keyboard does not respond. The laptop sometimes goes to the Boot Manager when turned on, the boot manager flickers and is uncontrollable. Other times it gives off a loud violent beep sound. Once it went to login but the keyboard would not work so i could not login.
View 2 Replies View RelatedI have been reading other threads about the instructions to update the driver for the "keyboard filter" but I didn't feel adequately that they applied to me. So, my basic question is, do I absolutely need to do this to have a working keyboard when I finish?
View 5 Replies View Relatedi give you ATi updated drivers.
737-39069: ATI Catalyst™ Beta Driver Package for Windows 7 The information in this article applies to the following configuration(s):
ATI Radeon™ HD 4000 Series GPUs ATI Radeon™ HD 3000 Series GPUs ATI Radeon™ HD 2000 Series GPUs ATI Mobility Radeon™ HD 4000 Series GPUs ATI Mobility Radeon™ HD 3000 Series GPUs ATI Mobility Radeon™ HD 2000 Series GPUs AMD 780G Chipset AMD 780V Chipset AMD 790GX Chipset Windows 7 Operating System ATI Catalyst Beta driver package for Windows 7 - includes the ATI Catalyst Beta driver for Windows 7, and the ATI Catalyst™ Control Center (with limited feature support).
To download the ATI Catalyst™ Beta Driver Package for Windows 7, please click on the links below:
Catalyst 32-bit Windows 7 Beta Driver
Catalyst 64-bit Windows 7 Beta Driver
To view the release notes for the ATI Catalyst Beta Driver for Windows 7, please click the link below:
Catalyst Windows 7 Beta Driver Release Notes
Note: This Beta driver is provided “as is” and is not supported by AMD, and may contain software bugs. It has not completed full AMD testing. Use of this software is at your own risk.
I recently reinstalled windows but it won't activate and microsoft support charges like 100 dollars for help? What do I do ?
View 13 Replies View RelatedI just got my new laptop, which has Windows 7. I tried to use my microsoft wireless laser mouse 5000 but when I try an install the 64 bit vista driver, it claims compatibility issues. How do you i get around this? I need this mouse.
View 3 Replies View RelatedI have a peacock infrared keyboard and media center in win 7. My remotecontrol works fine,but I want my little keyboard to work as well. What can I do ? I am a Civil Engineer in ALL AROUND electronic so my knowlidge should be good enough to understand any answers Cordially Teddy Grimstad Nokia Finland
View 2 Replies View RelatedWindows 7 installs million updates after format. How can I put these updates inside on my Windows 7 ISO file? Some people told that you can download manually the updates and copy them to Updates folder which is inside on ISO file. But I can not understand which updates exactly should I copy inside ISO. For example: If I put SP1 inside on ISO, should I also add the other updates which are published before SP1? I mean SP1 includes all updates before itself? I realised that after formatting-clean installation of Windows 7, first some updates are installing, after that SP1 is installing and after SP1 ome other updates are installing? So how can I find these update list or something...
View 6 Replies View RelatedI recently installed the latest version of the Super video converter and it forced installed this search bar called "Updated Search Bar". I have searched everywhere and cannot find a way to remove it. It is not listed in Windows Add or Remove programs list.
View 7 Replies View RelatedI was looking to download the new drivers for 64-bit version but the dell site is confusing me- some of the drivers they have in the list for my pc isn't for my hardware lol. Where's the best place to see which dirvers have not updated? Will they all show in device manager?
View 9 Replies View Relatedwhen I update a driver or go through the Windows Update, what happens to the old Driver? Can I delete/uninstall the old Drivers once I update to the current drivers?
Essentially, am I losing Hard Drive space after each update? Since as I update, I install which overlaps the older Drivers, so the size just keeps getting bigger and bigger after each update?