Transfer Files From An Xp Pc To A New Windows 7 Desktop?
May 17, 2012
I intend to transfer files from an xp pc to a new windows 7 desktop. I have the belkin transfer cable to accomplish the transfer. Question: With one monitor, how do I negotiate the graphic instructions from one pc to the other?
I have a windows 7 laptop and a dell desktop. The desktop has no enternet use and has a few songs in the Windows Media Player that I would like to transfer over to my laptop itunes library to sync to my ipod touch, but I don't know how to do that.
I used XP Transfer Wizard to store my files (over 200GB) on external hard drive. Now I have Windows 7 machine and can't use them directly.I tried to use Virtual PC XP mode to import files but Virtual PC can only handle something around 136 GB virtual hard disk, so after 6 hours of transfer it stopped... I don't have the XP machine anymore - I'm stuck with Windows 7 and can't figure out how to move these files over..Is there a way to actually open all these Wizard IMGXXXXX.dat files and read them?
I saved my files and settings from a previous installation of windows 7 to an external hard drive using windows easy transfer. Now when I try to transfer those files and setting to my new installation I get the following message:
Windows Easy Transfer can't transfer your files and settings.
The message pops up only a few seconds after the transfer begins.Why is this?! I need those files and windows has screwed me.Everything is basically the same as before I reinstalled. Same computer, same windows 7 installation just recovered to factory settings.Same system language as before.BTW I'm on a Toshiba L505 laptop running Windows 7 Home Premium.
I have tried all the usual suspects such as a clean boot and uninstalling my antivirus to rule out third party interference. I have more than enough space on both my computer and on the external hard drive. I have tried only transferring a user account a few MBs large. I have reinstalled the OS twice just in case something went wrong there. I have clicked on the .MIG file directly. All lead to the same error message.The transfer file seems to be intact and not currupt
Is there another software other than WET that can use the same transfer file that WET created to restore my files? Please help me solve this if you can or at least point me in the right direction because right now I'm clueless. I can't emphasize how important those files are to me. I've searched for solutions on several forums and it seems that this is a problem people have been having for years now and windows hasn't provided an answer yet.
An interesting note, When I reboot the laptop after trying to do the transfer, a new user account appears at startup alongside the one I normally use.This new user account has the same unique name of the user account I am trying to restore but that's where the similarity ends.All the settings for this account are default settings and empty folders.
So I'm going to be building a new system soon and I was wondering if its possible to use my laptop hard drive in my new build and if Windows would transfer over with it. The laptop came pre-installed with windows so I don't know if this is possible.
I know there are very similar threads but like I said I cannot find a solution. [code] I recently noticed the transfer rate really slow, at an average about 1.5MB/s.I have tried enabling Better Performance option but what happens is that it starts really fast and then goes down to about 1.5MB/s anyways and usually just freezes or stops.I also have a laptop, its an Acer Aspire AS5745DG-6681. Specifications are:Intel Core i5-480M, 15.6" HD (1366x768) LED-backlit, 4GB RAM, 500GB HDD, Blu-ray Combo Drive, NVIDIA GeForce GT 425M 1GB, Wireless N, HDMI, Webcam, 9-cell, Windows 7 Home Premium 64-bit.I updated the RAM to 8GB on the laptop.Using the same external hard drive, I can get rates at an average of 30MB/s and better performance is also disabled on the laptop.I Don't know what the difference is they both have Windows 7 64 bit, just the laptop is Home Premium and my desktop is Windows 7 Enterprise.
I have files backed up on a WD My Book external hard drive from my XP computer. When I plug in the USB in my new HP Touchsmart, it opens the jump drive, but says the folder is empty. I also have files on my PNY jump drive from the XP and another Vista computer. It opens the jump drive and sees the Vista files but not the XP files. The Vista computer sees all files on the WD My Book and the PNY jump drive. Any suggestion to get Windows 7 to see the files. My old computer died, so I can't use Windows Easy Transfer.
I was using XP Pro and am getting new Windows 7 Dell 8300 XPS i7 Home Premium 64 bit.
Last time I got a new one, I just installed the old drive as a 2nd drive in new computer and all my files were there as well as all my software I accumulated. Most of the programs worked but some did not, but no big deal.
I am thinking of doing the same thing when I get new computer again; probably will get it tomorrow. Since I am going from XP to Windows 7, will this be a problem?
I want to transfer files from xp to Windows 7 via LAN. however, i want the files to go to a specific partition that i just created for these files. Im unsure how to select the proper partition. there is nothing on the new partition, no OS, i just want to use it as storage.I have a 1tb hdd in the computer the files are to be transfered to. when i did a clean install of Windows 7, i created a 100gb partition to use as my primary, (with my OS and basically everything), leaving the other 900gb unallocated space. i just created a 24gb partition to use to back up files from another computer.in command prompt as administrator, in diskpart, i selected the new volume, but im not seeing a new drive designation for the new partition in which this volume is supposed to be located.i also did not choose a label for the new partition, such as C; D; E;....
I'm finally going to move on from my XP home edition to Windows 7. I really dont want to download and install all my games again and all of my other files. I heard that theres a file transfer program that lets you move your xp files to your new windows 7 OS. Is this even possible or is is there another way?
I had a Windows 7 HP system that the motherboard was going out, so I sent it back. I did a reinstall of Windows 7 at first and it had me to back up my files to a drive, so I did. I sent it back and now I have my XP system. Can I retrieve those files from that external HD and have them on my XP system?
My friend asked me to transfer her photo's from the LG UX300 to her Windows 7 computer and I can't seem to get it to work. I have the data transfer USB cord and installed the correct drivers but the phone is only appearing as a modem and won't let me access any files.
I recently built a new computer and, mistakenly, had both hard drives plugged into the board when I installed windows. I was having quite a bit of difficulty getting windows to install because of some memory problems and when I finally got it to work I accidently put the 100 MB's of System Files on one of my hard drives and the rest of the partition on the other drive.I wanted it all on my new 1.5 TB drive and instead the System Files were loaded onto my old 320 GB drive from my last computer. I'm only using it as a storage drive anyways.I was wondering if there was an easy way to move the System Files onto the 1.5 TB drive without having to format the drive and start over.
I recently used Windows Easy Transfer (cable) to transfer all my files from my old XP Pro laptop to my new 64 bit Win 7 laptop. All my music, pictures and docs transferred easily, but for some reason I can't find my old emails or email contacts. They aren't showing up in WLM. I understood these would transfer from Outlook Express to WLM.
I use Filezilla to transfer files to my website bobsmart. My copy of Filezilla can't see the updated file on my computer. It only sees the file dated 2010 instead of the current file. I suspect a security problem with windows 7 that is blocking this FTP client from making changes to my computer. How can I tell windows 7 to allow Filezilla to do its thing?
I got the transfer key from the old computer and entered it into the new computer to start the transfer over the network.The transfer started and it says it will take over a day to completer.I was expecting somewhere along the line to be able to select which files and settings to transfer. I never saw anything like that.
Right now I'm using Vista Home Premium but I'm thinking about upgrading to Windows 7 Ultimate. Is there a way to transfer all my files/folders to Win 7 from Vista without having to reinstall everything again?
Is there anything similar to Mac OS X Airdrop to wirelessly transfer files between two computers running Windows 7?If possible without an internet connection, but I'd still be fine if it requires one, since one of the computers doesn't have a wireless card.
I have a desktop with W.7. Ultimate - connected to Internet by WIFI - and I have just bought a laptop, which has W.7 Home Premium, to use when away from home.I have just returned and would like to transfer data from the laptop to the desktop. I do not seem to be able to do so.I could obtain a memory stick and transfer via that, but I was wondering if I could obtain a cable (USB) that I could use.I have a second HD inside my tower from my last Computer .- which contains my music collection - and I can access that through the Start button/Computer. I do not have a cable with a USB connection at each end - only an extension USB cable for my reception of WIFI which is an ordinary USB for the computer and a larger size to connect the radio receiver.
how I can transfer all the items on my user account to another account on my computer since my system icons are all grayed out and can't get them to work no matter what I try. So the best solution for me is to transfer to another account and then my troubles will be over?
My desktop dies after 6 years and I want to transfer data from old hard drive to new laptop. What do I need to buy. What is the cable called and can I use and buy a enclosure.
I can't transfer any files that are bigger than 1mb to any of my flash drives. I've tried many different sizes and types of files using different USBs and different ports and even formatted the USBs. I can transfer files in between my two internal HDDs without any problems. Also it seems if the file system is FAT32 it transfers files normally. When the file system is NTFS it has a speed of 600-1000 MB/s which shouldn't be possible since they are usb 2 flash drives. I wouldn't really mind but i need to transfer 4+ gb files.
i have a sata hdd western digital 500GB unfortunately it has hard disk problems but I can still use the drive for saving files..now Iam purchasing another 500GB HDD...my qeustion is how do I transfer files from my old hdd to the new HDD..what programs am i going to use?
I bought my mother a new vaio laptop with windows 7. Ive never used 7, so what would be an easy way to transfer all her files from her old XP dell latitude POS to the new Vaio. She has tax software, quickbooks, and a crap load of related and unrelated files.
I purchased Outlook 2010 out-of-the-box and am authorized to install it on two machines. It's been running on my desktop (duo-core Intel/Windows 7 64bit) for months now, and I've just gotten around to installing it on my Toshiba Satellite (Athlon/Windows 7 32bit) laptop.
So far, so good, but I don't want to have to manually and tediously set up my email accounts again. let alone copy calendar and notes, etc. How do I transfer all that data over? It'll be especially important when synchronizing the two machines. I tried copying over the C:User...AppDataLocalMicrosoftOutlook folder with contents and C:User...AppDataRoamingMicrosoftOutlook folder as well. No apparent effect.
It used to be that copying Outlook.pst would do the trick, but no longer, apparently.
Windows 7 PC and Windows 7 laptop.I have a PC with Windows 7 OS. I have recently purchased one laptop with Windows 7 OS.Now I want to copy large amount of User Data from PC to Laptop. Is there any easy way of copying from PC to laptop? Presently I am transferring user data using a pendrive of 4GB.