Startup Repair Loop / Root Cause No Hard Drive Detected
Nov 11, 2012
My pc is a stock Asus G53SX-A1, no hardware changes. Yet it says the reason I got a blue screen was due to hardware changes. My computer froze and rebooted during a video game. So I have been experiencing the classic startup repair loop and I tried everything I could find on google without progress. When I try to the option to fix the problem automatically it says it wasn't able to help and tells me the root cause is because there is no hard drive detected, and that if a hard drive is installed it is not responding. I can't detect in command prompt, but somehow I can see contents of it through BIOS so its really odd. When I tried to reinstall windows it says it can't find a hard drive to install on and I need to insert a drivers disk so I can set up the hard drive to continue. So I put in my Asus drivers disk and yet it tells me there's no drivers detected. I looked at the Asus website and all the downloads they have available are the same as on that same drivers disk it said it couldn't find drivers on. So right now my main problem is my pc doesn't detect that I have a hard drive at all even though I do, the same one the pc came with. This laptop has worked fine for almost a year and this issue just came out of nowhere, so any ideas as to why my HD would suddenly disappear in my computers eyes?
The hard drive on my laptop recently failed and I purchased and installed a new one to replace it. I cloned as much of the data off of the old drive as possible. However, when I go to boot from it, it gets stuck in a startup repair loop. Startup repair doesn't find any problems, but it is unable to boot windows. I installed windows 7 on a new partition see if I could do a repair install to the other hard drive, but that does not appear to be possible. I've ran chkdsk and it does not find any errors. Is there anything else that I should try to be able to run the older install, or should i just start reinstalling everything.
The screen cracked on my old laptop and my insurance decided it would be cheaper to give me a new one as opposed to fixing it. The new laptop arrived today, along with the hard drive from my old one. I thought it would be simply a case of opening the new laptop up, taking out the hard drive and putting in my old one (note: I turned on the laptop with it's new hard drive first to make sure it worked ok).
However, after doing this and turning on the laptop, I am faced a message saying "Windows failed to start. A recent hardware or software change might be the cause.". I am given 2 options, Launch Startup Repair or Start Windows Normally. Clicking Start Windows Normally just brings me back to the same screen, and I've tried running the startup repair several times to no avail. Following the instructions at Startup Repair Infinite Loop Recovery also does not solve the problem.
I have a Dell Inspiron and a while ago I shut down my PC and the next morning I was faced with options to repair my computer. It hung on the screen for ages before it actually came up with startup repair and supposedly fixed the problem. A few days later, everything got very slow and started to freeze a lot and before long, booting the computer got very slow as well as it hung for about ten minutes on a black screen after the 'welcome' screen before finally starting up. I decided to reinstall the operating system (I did NOT reformat the C drive), so I borrowed my Grandma's external hard drive and copied my files. After reinstalling using a Dell Windows 7 64-bit Home Premium Re-Installation DVD, I copied and deleted the files off the external hard drive onto my PC (I didn't know it would create a Windows.old folder) and started installing programs. Then I left it overnight to install quite a big program. This morning, somehow it had turned off. I turned it on and it gave me the safe mode options and a 'start windows normally' option. I chose the latter and after typing my password it hung on the welcome screen again. I left it for ages and it just went back to the user login screen again. I pressed the red button in the corner to shut it down but it just hung once again on an empty screen so I did a hard shutdown (held down the power button). I turned it on again...startup repair. It gave me the option for system restore, which I did (then realising when it finished that I hadn't made a backup). I booted it, and again it wouldn't start properly. At this time, safe mode booted fine. After trying various things (even using a compressed air can to get rid of dust) and a few hard shutdowns, suddenly every option from the advanced boot menu took me to startup repair except 'Repair your Computer' which gave the normal options for repair (although now it only gives me 2, Startup Repair and DataSafe Restore and Emergency Backup. Now when I do startup repair, some times it says it has fixed the problem, and sometimes it says it cannot be fixed automatically and gives me information on the problem (a few things it said were: 'StartupRepairOffline', 'AutoFailover' and 'CorruptRegistry').
I can't reinstall my computer because then I would lose my precious files.
Is there some way I can save my files and reinstall or even just save my files somehow or am I screwed?
I was recently using my girlfriends computer when a message came up saying something about an automatic update then went into a repair mode. Then when the computer restarted it went into startup repair. It says it can't find any problems, and when you restart it, it keeps going to startup repair. The computer originally had XP on it, and her step dad installed 7 right before we moved across the country, so we don't have any kind of install or recovery discs
I get into startup repair everytime i boot my pc which is never successful. I am definitely goin to explain it in detail but dis is basic problem nd plz dont mind typing coz m typing fast on iphone which may cause errors in typing!Yesterday,i used my pc for 7-8 hrs continuosly which is not big deal but due to it i can't figure out my action which caused problem. I kept it on for downloading at night nd when in morning i got boot screen which comes when pc is directly turned off. I did Start Windows Normally nd i got usual windows 7 loading animation for a secong nd den it started startup repair after that everytime i boot it takes me to startup repair resulting in continuos failure. I hv googled nd found many threads but none matched my exact one. Startup infinity loop didn't work. Below r given few conclusions nd obstacles-1.) i can't get into advanced boot options using F8. But i can get into recovery menu using install dvd nd view advanced options frm startup repair.
2.) System restore din't work. I mean its not successful in restoring.3.) bootrec.exe didnt work4.) imp point to be noted is my last update was on 23 dec while pc worked fine on 24 th & 25th dec means dont knw wat happened 25th night that caused this problem on 26th morning.5.) sfc/scannow says "a startup repair is left to be completed." it says to complete that first then use sfc/scannow.6.) chkdsk results in last line saying failed to transfer log......7.) i also get a report like many others about that problem signature.8.) repair install not possible coz windows can't start only.9.)i hv made a backup using cmd but is there any way without clean install?
I have looked into the startup repair loop problem a bit and have tried the advanced repair option but when it prompts me for a login and password, it only gives the option to log in as "updatususer".
I get the following on boot up Launch startup repair (recommended)start windows normally Selecting either options causes it to enter an infinite loop The last thing I did while it was working was to install a HP printer, it then said restart and since then I have not been able to get pass the Launch startup repair (recommended)start windows normally stage I have tried all the options under F8 on boot, but happy to try any suggestions as I could be completely wrong or may have overlooked something.PS I have read the threads on this forum but can not seem to get it started using the suggestions.
After a (sloppily done on my part) multiple driver update on 7 Home Premium x64, I've been tossed into Startup Repair. SR goes into an endless repeating loop - never reporting failure, just an endless repeat. I've used the Windows 7 install disk and tried System Restore. Twice System Restore has reported success, yet I immediately end up booting back into the Startup Repair loop.
I am given no options - when I try F8 I'm simply tossed back into Startup Repair. I'm thinking there may be a command prompt way out of the loop, but I'm clueless in that area.
It started about a year ago, i just left it but now i feel the need to try and fix it. I have gone through Startup Repair Infinite Loop Recovery but it was no helpful.
I'm not sure if I am in the right category but I'll just leave it here. I downloaded a corrupt file and my computer went crazy and so I shut it off and now it keeps going through the start up repair over and over. It'll say that it's rapaired and it will restart but then it will go straight back into doing it over and over. Can someone please answer this quickly because finals are next week and I have unfinished papers and websites and animations on my computer that need to be handed in pronto.
I am currently working on an emachines e525 (its for a friend, I would never buy an emachine) and when I got the machine it was stuck in a boot loop to the startup repair. I could not boot into windows via safe mode or any other method. I ended up reinstalling Windows 7 and everything looked fine until I rebooted. The startup repair loop started again. Frustrated at this point I formated the hard drive and installed Windows XP. It was working great for a while even after I rebooted several times. I went to bed and then today turned the laptop back on and I got the unmountable_boot_volume blue screen.I also have ran chkdsk multiple times and it doesnt find anything to repair. I also ran a memory test (even though I did not believe that is/was the issue and it came back with no errors.
I have been fighting with this tower that I am working on for a bit and I need to solicit your experience.his is an older tower, a Radiant S336-024 with an Intel 945G board.I am installing an SCSI Samsung 40Gb HDD and a SATA 180 Gb HDD.I had it booting before. I installed windows 7 with the 40 installed and it was hit and miss. I have turned off the automatic updates and now it will run some of the time. I often restart the system and it goes straight to Startup Repair without warning.
Before I start this happened after updating the motherboard BIOS from version 1.4 to 1.7, I went to 1.6 after just in case the latest BIOS had a bug
I've been stuck on the startup repair for almost 5 hours saying that it's repairing my hard drive or whatever (i forget exactly what it said), I first booted linux to check the SMART data on the HDD (i now know that I can do it with HBCD too) it came back all fine. I am now running Hirens Boot CD and DRevitalise to scan and repair bad sectors.
my problem is rather odd (or at least I haven't seen it before). Whenever I boot up the netbook it goes right into startup repair, without the option to cancel it, even if I try to start windows in safe mode (or any other startup options for that matter), the system launches the startup repair.The repair itself runs fine (doesn't freeze or antyhing like that), however it is never able to fix the issue ("Startup Repair is unable to repair this computer automatically").
The problem details read as follows:
Problem signature: Problem event name: StartupRepairOffline Problem signature01: 0.0.0.0 Problem signature02: 6.1.7600.16385 Problem signature03: unknown Problem signature04: 6
EDIT: This is added by moderator. The problem system has been "restored" to factory defaults, so you can skip to post # 11 and be missing only some history. I have also at this time moved the thread from Networking to Windows 7.Okay, this is my boyfriend's laptop. He's left it with me to see if I can fix it. I'm at work right now, and it is at home, so I can't try anything until I get home tonight.Here'e the situation, as best I can tell:He has 2 laptops...one is old, and connects fine, the other is probably 6 months old - a Dell - Windows 7, and this is the one that is having problems. The other laptop has no problem with its connection - it is just the Dell laptop. He brought it over to my house last night, and it is doing the same thing. It finds and connects to my network, but it states that it is a "limited access" connection, which essentially means you have no internet connection (apparently).
So here is what I have found out. For one, his laptop came with few months subscription to McAfee...and apparently that is now expired. He's never renewed it. I did put MalwareBytes on there for him, when he got the thing, but I don't think he runs it unless he thinks there is a problem. I've told him to keep it updated, but I guess he thinks I can fix it if there is a problem. Again... (Once we get this fixed, he WILL keep this stuff current..darn it.) Anyway...he said he kept getting some popups - the ones that ask if you want to "allow a program to make a change to your computer"...and he always said no. I think he got several of those in one night. He ran the MalwareBytes, and it found and quarantined some malware (I don't know what sort of things - I was not there when he ran it) and then when he tried to access his network again, he got the "limited access" thing. So...something has happened, just on that laptop. I messed around with it a little last night, but I couldn't get anything working.
So I was using a program called TuneUp Utilities, and I used this function called the Disk Doctor to check for errors in my computer.While it was checking for errors, my computer shut down automatically and when I started it up again a black screen appears giving me the option to either load Startup Repair or Start Windows Normally. When I start Windows Normally, everything goes fine until I see the cursor. Nothing happens and then the computer restarts on it's own. I've even tried disabling restart on system failure but when I did that the computer just stayed at a dark screen until I restarted it.When I load Startup Repair, it searches for problems for like 5 minutes and then says it can't be automatically fixed. It says to remove all USB cables and everything (which I did but had no effect) and lets me have advanced recovery options.When I load advanced recovery options, all that appears is Startup Repair again.When I press F8 and do a Safe Mode, it starts up normally but once I see the mouse cursor the computer restarts.
Packard bell PC imedia something, radeon sapphire 5670 HD GPU upgrade, recent (Jan 2012) windows 7 64 bit custom install upgrade from vista 32 bit, during which I backed up all files on a Samsung external hard drive, then did a complete hard drive wipe install of windows 7, then put it all back on using software run by the Samsung drive. Went perfectly as planned. Other than that the PC was stock. One day playing Cod 8, screen inputs failed, then keyboard failed, then funny smell from PC tower, so I switched it off. After analysis, showed to be PSU fail. I took the opportunity to build a better PC, as this one is quite a few years old now.
So I only used the hard drive (WD6400AAKS) Blu ray reader disk drive, memory card reader drive and Radeon GPU from the old PC ASUS P8Z68-V LX mobo Overclocked intel i5 processor with artic cooling freezer 13 CPU fan Corsair TX650 PSU Antec DF-30 case with 4 led fans
All cables and such are new, and all plugged in correctly. When turned on the first time, all fans on, leds, and everything started as it should have, but No beep, monitor came on, instead of showing initial boot screen, asus version came up, then tried to boots windows, then just as the circles begging to circle the logo, it crashes, screen turns off, then on again, then back to asus screen, the windows screen crashes like before, then asks me to do startup repair or start as normally - No other options.
Every time I do this, it says it couldn't solve the problem, and restarts, then crashes, then restarts, then goes to startup repair option again. If I select start as normally, it just crashes again like before then loops back to startup repair option again. I have tried all options possible after the startup repair fails, including command prompt stuff, system restores, image restores, hardware diagnostics, basically everything. It either fails, then goes back to the startup repair loop, or tells me there are no problems with the hardware, then goes back to the startup repair loop.
I think my hard drive is corrupt, but signs have led me to believe its not completely corrupt - like it will see all the places and times on my hard drive to use when I select system restore, however after a fair time of trying each time, and with multiple possible restore points, it fails every time. I think all the other hardware is fine, and working as it should. I think some of the windows system files were damaged when the old PC's PSU blew while playing COD (it usually handles COD fine).
I am having a nightmare with my Dell Latitude E4300 laptop. At the moment it runs a continuous loop of start up repair and will not allow me to even attempt to get into Windows 7 until this has been done. When it runs the test it stops, giving the error message no OS files found on disk. Everytime I restart this process just continues.It is a work laptop, so I do not have and windows recovery disks.To make matters even worse, before the startup repair loop the laptop wouldnt even let me into the Windows system, even in safe mode. After attempting to get into safe mode it would stop at the driver classpnp.sys. Further tests would also show up the error message 2000 0146.I am not technical at all, so am hoping this is going to make sense to someone who can explain it in very simple lanuage.Just to reconfirm, I do not have any windows recovery disks - and cannot access safe mode at all.
So I've got a gateway laptop here that one day was booted up and went to a boot menu screen stating there were errors with the option to launch startup repair. After doing so there has been no sucess, after a looooong process of checking for errors, it says it's unrepairable, says to exit/reboot and goes back to the same screens.
I've tried with a Windows 7 disc in there (vs using the recovery option built into the laptop) and still no success. I've tried restore to an earlier restore point with no success. I've tried to get into safe mode with no success and I've tried the 'last known good configuration' option with no success either!
I booted using 'spinrite' to do a deep check of the HD itself. It gets about 6-7% in and than suddenly completely shuts off! Powers off as if someone yanked the plug. The Cpu area and heatpipes underneath are VERY hot after this point so I suspect it's an overheat protection kicking in, but why it's overheating while running spinrite I can't figure out.
So I removed the HD and have connected it to my PC. It was accessible, could see the win and system folders etc. I right clicked the drive from my PC now and ran 'tools' error-checking. It makes some progress while counting sectors but eventually gets to a certain sector number and hangs there with no further progress of the error check.
At this point I'm planning to just yank any important files off of it (since it's still accessible when plugged into my PC) and reformatting/reinstalling Windows 7 but I am curious, these symptoms, are they synonymous with an imminent drive failure, or is it just a corrupt system?
my computer, a toshiba satellite L655D-S5159, has been broken recently. At first, I got an infinite startup repair loop, because of a corrupted registry. I checked the registry files and they are all 256kb. I tried to run sfc /scannow and chkdsk /f /r, but that didn't do anything. Then I tried to run bootrec rebuildbcd, and now I'm getting error 0xc0000225 at startup.
I turned my computer off so it could update. It turned off correctly. The next morning, I turn on my computer, and windows starts, and then configures it's updates. After this windows restarts my computer. When the computer restarted, Windows couldn't start. I tried multiple times, but got nowhere. System restare didn't work, I got errors when trying to restore. (I have tried 2 different restore points.) Startup repair, after a few tries, finally gave me an error. It said:
Root cause found: Bad hard disk: Bugcheck 7a. Parameters = 0xfffff8a001342c00, 0xffffffffc000009c, 0xdda0b8c0, 0xfffff900c0780000.
Every other test ran without errors. This was somehow caused by windows update, because my comp has worked perfectly until windows installed these updates.
While attempting to perform a startup repair....I get a hard disk could not be found. I have a HP dv6 -3050 US....I'd like to know if this is for sure a hardware issue...before wasting time and money on ordering HP recovery disks..
so I got a new asus P8z68-V pro motherboard. Im re-using my current 750gb SATA drive. I plugged it into the sata port, and start the computer. When it starts it says "no hard drive is detected!" I go into the bios, and on the bottom it has a disk drive, and a SATA drive. It recognizes that the sata drive is there, but when i go to start up it says no hard drive is detected. I have tried a few different sata ports and it is the exact same thing.
I've got an issue during post installation. One of my hard drive is never given a drive letter, but it does show up as a possible install drive during setup.
I always have to go into Drive Management and assign that drive a letter (and moving my DVD drive down a letter to keep the letters in order).
Under Drive Management the drive has the Properties (System, Active, Primary Partition), so I'm wondering if that is the issue.
Is there a way to change Drive Properties (if that is the case)?
my acer computer stop-ed working while been surfing net, first frozen ,switch it off by pressing power button, then comes message :reboot and select proper boot device, i checked the bios then nor hard drive western segate 1tb neather dvd been detected. i tried to hold f10 but does not work?
having an issue with a brand new HD I bought. Right now Windows 7 will not detect the HD as a drive.It shows up in the BIOS correctly, but not in My Computer. It is in a Frankenstein setup: SATA connection into the SATA port on the MB (it is enabled and showing), with power from an external HD enclosure.I don't think that would affect it though, as it is just drawing power from a different PS.i did some digging and found it in the System Information under 'discs' instead of 'drives' like my original HD.[URL]...
for some reason my internal hard drive after installing it and reinstalling windows 7 it does not show up for some reason... I have check the cords to make sure they are in correctly
My Boot menu says it's there but my OS does not see it?
