Split A Network Without Changing Hardware?

Feb 27, 2012

I have a small office network, it consists of a wireless router, 8 port switch, 5 computers and a DVR for my surveillance cameras.

Router is Linksys E2500 dual band wireless
8 port over the counter switch
Two computers are running windows xp pro

One computer is running windows vista home

Two computers are running windows 7 premium 64 bit

All computers are hard-wired and wireless connection is disabled.

Bell DSL internet

I recently leased out one of the offices in the building and I am providing the tenant Internet via my network.Is there any way that I can split the network such that my tenant cannot access my computers while my computers can talk to each other?I would like to do it with software if possible.

View 3 Replies


ADVERTISEMENT

Network Constantly Changing Between Unidentified Public Network And Home

Aug 30, 2012

Home network with Wifi and ethernet. Using 3x Notebooks and 3x workstations. One of the workstations (W7 ultimate) keeps changing between Public and Home. When this happens, the internet connection dies. I cannot see other workstations either when on public network. Workstation using wifi. Does the same on cable. When it changes to Public, it disconnects from the internet and I cannot get to the router even though it has the workstation has an IP(DHCP or static). Default gateway and subnet is correct. TCP v4 is being used and nothing else is enabled.

Why is this happening?
- I have tried DHCP as well as Static addresses
- Reconfigured NIC(Netgear WG311T), uninstalled and reinstalled it.
- Removed Wifi connection and re-added it.
- Changed auth type, encryption type and keys to connection

Have I covered everything? The only thing different is that I installed a new router - Duo Plus 300wr. It cannot be the router because all the other notebooks connect to it wireless and so does my iPad, Android device and tablet...so it rules that out?

View 3 Replies View Related

Changing Network Name

Dec 1, 2009

I have 2 copies of Win 7 installed, one on my lappy, the other on my main pc.

My lappy can see all my files on the main pc and share the printer no probs.

However my main pc cannot influence my lappy, although it sees it on the network.

The only difference I can see in the settings is that my laapy network is named 'home' on the work network, and my main pc is part of a network called 'network' on work network.

I guess I need to change the name of the network to 'home' on the main pc but can't find the route to do it. Funny the lappy can see the main pc but not vice versa.

Any ideas folks?

View 2 Replies View Related

Changing Windows 7 Network ID?

Feb 16, 2011

One of the computer is windows 7 and the other XP SP3. Both computers have the same 4 user accounts. Win7 pc is set to share file/printer and public files with password. On the XP machine, I went to My Network Places, to the specific Workgroup, to the win7 computer, and folders. A windows dialog came up asking for user id and password. I put in an admin id and password on the win7 pc. Here is my problem. I realized I shouldn't be using that id. But, I can't find a way to change the id on the XP pc. I went to the user account, then manage my network passwords. But, there is no ID and PW

View 8 Replies View Related

Changing An XP Network To Windows 7 With SBS 2003

Apr 13, 2012

We have 30 computers all running XP, we are now due to replace them as they are 10 years old. Would I need to update my Server OS from SBS 2003 before installing Windows 7 on the clients ?

I know the proper procedure is to upgrade all tech together, back end through to front end, but would SBS 2003 handle and function at 100% ? If I go for an upgrade on the Server OS I would need to upgrade the server hardware to 64bit.

View 1 Replies View Related

Default Printer Not Changing With Network

Oct 22, 2009

So, I have several different printers set up for different wireless networks that I connect to; the only problem is that Windows never refreshes or updates my default printer when I connect to a different wireless network.

If I go into the "Manage default printers" and click the network and printer combination (stored in the saved list below) and then click "Update" it will successfully update my default printer to the one it should be. However, that's kind of a pain to have to go through several menus just to update my default printer--it would be faster to do it the old-fashioned way (right click the printer and click "set as default printer").

Any ideas on why this isn't updating correctly--I haven't yet seen it update since setting up my default printers. Or, should this go in a different topic than Networking & Sharing?

View 7 Replies View Related

Changing Printing Preferences For Network Printer?

Oct 22, 2012

I click on Devices and Printers. I right-click my Printer, then click Printing Preferences (it's a network printer). I change the Original Size to A4, then click apply. When I try to print, the Original Size is wrong! When I go back to my printer's preferences, my change is not there anymore.

View 6 Replies View Related

Network Computer Not Accessible After Changing Password

Sep 3, 2012

I am on a network that contains both XP and Windows 7 computers. The problem at hand is on a Windows 7 computer (Computer 9). The XP computer is Computer 4. I succeeded in accessing Computer 4 from Computer 9 by typing my Computer 4 credentials into a window that popped up on Computer 9 the first time that I attempted to access Computer 4 from Computer 9. After that, the password on Computer 4 was changed. Now, when I try to access Computer 4 from Computer 9, I receive the following message: "Windows cannot access \COMPUTER 4..You do not have permission to access \COMPUTER-4. Contact your network administrator to request access." Can anyone please tell me how to access the pop-up window on Computer 9 that will let me type in the new Computer 4 password?

View 2 Replies View Related

Changing Wireless Network Connection Priority?

Nov 26, 2012

I have three different wireless networks I can connect to, but the one Windows connects to first by default is not my first choice. I'd like to reorder the connection priority. Problem is, as you can see, no networks show up in my manage networks control panel! It clear as day shows that there are five choices, but, does not list them for me to prioritize! Is there a setting somewhere I'm missing that will make the networks visible?

View 6 Replies View Related

Restore Network Settings On Windows 7 After Changing The Domain?

Apr 18, 2012

I accidentally took my laptop off the domain while installing a printer from a workgroup network, and placed the laptop on the workgroup, once restarted I cannot log in anymore, I am trying the password recovery tools to log into the administrator account.Is there a way for me to roll back the settings and have it back on the domain the way it was without being connected to the domain?And to get the user account back the way it was (basically just the network settings) so that I do not have to setup a new profile and migrate all the settings and programs?

View 4 Replies View Related

Can't Connect Directly To Wifi But Can Using IPhone As Hotspot - Limited Access, Changing It To Public Network Etc

Feb 8, 2012

I have been using my home internet in my new place for a couple of weeks fine, yesterday morning when I tried it it had the limited access yellow triangle and wouldn�t connect.I reset the router and connected to the wifi on my iphone which worked fine, I checked the DNS numbers were the same as on my iphone which they were and I had not changed any settings. I spent the entire day yesterday online looking for solutions, I�ve reset the adapter, disabled it etc, set the ip and dns to automatic and back again etc etc.
When my wifi tries to connect to my home internet it takes a LONG time to identify and then identifies it either as an unidentified network and/or public. Even when I change it to home it changes it back to public or just doesn�t let me change it to home and says try again later.

Ps- I just tried disabling then re-enabling the protocol 6 on the wifi which isn�t working and it just said �in order to configure TCP/IP, you must install and enable a network adapter card. But then it just let me configure it and is still connected but with limited access and public network.

View 9 Replies View Related

Font Size Changing Whenever Changing Settings In Personalization?

Jul 8, 2012

This all started whenever I wanted to change my text size different by changing my DPI settings. What I did was right click, go to screen resolution, and clicked on "Make text and other items larger or smaller". From this I changed it to 100% from 125%. I noticed it had changed my font size to the 100%. It then made everything SUPER small when I changed my theme settings.Whenever I right click and go into personalization settings, I do the usual customizing to my likings. Since I want to save the theme, I do so by naming it, blah. Now I want to use the blah theme by click on it, and I do so. Everything is fine and dandy until I right click my desktop to refresh(out of habit). This is the before and after of the font sizes.

Before
After

My workaround was to set a custom DPI setting, log off like it prompts me to, then changing it back to 100%, again prompting to do so. It is so annoying to do so.

View 1 Replies View Related

How To Split 1 Mp3 File To 2

Dec 3, 2012

I have an mp3 file that, although it says 1 file, is comprised of 2 individual meditation tapes. These individuals are separate (FLAC) files on the CD's shipped but for whatever reason they're combined on the download into 1 mp3.Although I can copy a FLAC file to the drive and convert it to ALAC (or mp3) for the iPod the process would be much easier to separate the 1 mp3 file into its 2 component tracks. Is there a relatively easy way to do what I want?

View 5 Replies View Related

Split Screen

Nov 10, 2009

I actually got my work station "my laptop/ two screens connected" and using split screen. I am on a terminal server environment and when I connect to a Terminal server (windows server 2003) I can drag the windows to any screen but once I can't drag back any applications of windows i open on that particular server.. which is annoying.. any thoughts??

View 0 Replies View Related

Set Up A Split Page?

Oct 14, 2011

how do i set up a split page

View 3 Replies View Related

How To Do Split Screens ?

Dec 25, 2009

how to do split screen on window 7 ?

View 1 Replies View Related

How Do I Split The Screen ?

Jan 29, 2010

I want to do 2 things on my monitor using win 7, how do I do it. How do I split the screen ?

View 2 Replies View Related

How To Get The Split Screen In Windows 7

May 23, 2011

I would like to be able to get two web pages displayed at once on my windows 7 system!! What I want to avoid is enabling the Aero Snap? I thought I overheard my IT guy say that it could be done without it? I have had problems with Aero in general. Like I wanted to do the cool thing with my files where they blow one after another through the screen like a deck of cards and you can stop to look at one or you can keep it going? How do I enable that feature? I think it makes the files like glass tiles and you can just see through them as they move along. Then I want to be able to have the two web pages at the same time on the screen? Is it true that you can not view secure pages when you use this feature?

View 2 Replies View Related

Screen Freezes Every Second For A Split Second

Nov 14, 2011

Earlier today my computer had a rather nasty shut down with no battery and then this started. I have checked around and I have done everything I can think of to see what could be causing the screen freezes including: Checking Processes for something hogging CPU, checking event viewer system and application for excessive errors, running memory diagnostics and running in safe mode but I have had no luck. What could be slightly more alarming is that I am fairly sure that this freezing problem is actually occuring outside of Windows, in the BIOS I could still notice the freezing.

View 2 Replies View Related

How To Split One ISP IP Address With A Switch

Jun 24, 2011

Trying to get two computers running on one IP through a simple dynex switch. Can comp 2 mimic the ISP's address?Edit: Or could I manually assign the homegroup an IP for the ISP and split it from there like a router? Trying to do this without a router.

View 6 Replies View Related

How To Split Application Windows To Top

Feb 8, 2012

Based on the Windows 7 feature where you can press Windows Logo + Right (or left) Arrow key to maximize an application window to the right (or left) half of the screen, is there a way to maximise windows to either the top or bottom half of the screen? I know that stacking windows is one option, but that only works to the top quarter of a screen, and affects all other open windows, so that's no good unfortunately. The main app I want to use this with is putty so that I can see the full width of commands when using SSH for example.

View 2 Replies View Related

How-to Split STR From Movies MKV File

Feb 15, 2012

I Need to Watch In Splash Pro EX But.. Problems With Subtitle. It Not Show. Now I Can Select Sound Only

View 1 Replies View Related

Split Os Data Between Drives

Jul 14, 2012

I recently built a new computer that has an ssd intended for the os, the problem is it isnt big eneugh for all the program files, and user data. I want to move that part of the operating system over to the hard drive but have no idea how to go about it.

View 4 Replies View Related

How To Activate Split Screen ?

Oct 29, 2009

I was told you can use split screen in Windows 7. I have Windows 7 Ultimate edition and I would like to know how to activate split screen. Does it require a special video card?

View 1 Replies View Related

Computer's Screen Is Split?

Apr 23, 2011

The screen is split so that I have one larger screen with no right side and then next to that I have a smaller left side on the left side. It keeps coming and going.. I have an Alienware m11x; brand FREAKING new, just set it up today.

View 3 Replies View Related

Program To Split The Screen?

Jan 11, 2012

i was wondering if there was a program that could like split the screen that way it's like havin two monitors when you hit full screen for web browsing or a movie that it would only full screen to half that way you can multi task side by side rather then constantly having too resize two windows

View 4 Replies View Related

Split Screen Windows 7

May 7, 2012

I'm having trouble with my HP 7515 Also,I need to know how to have a split screen

View 4 Replies View Related

Split Screen Windows 7

Aug 17, 2012

how do i fix my screen, that is split into 3 pieces?

View 1 Replies View Related

How To Do Split Screens On Windows 7

Oct 18, 2012

HOWDO i DO A SPLIT SCEEN WINDOWS 7?

View 2 Replies View Related

Split Screen Windows 7 Laptop

Feb 2, 2013

i have a medion akoya p8610 laptop with windows 7 home preminum edition,i have an hdmi connected from the laptop to my tv,at 3pm i want to watch football on the internet on my tv and go on facebook on my laptop,can i have two tabs on firefox doing both football and facebook and make only the football tab appear on my tv while using facebook on my laptop?

View 2 Replies View Related

RAID1 Split Drives Cannot See Erased Hdd

Jun 26, 2012

I'm running RAID1 with two 1tb drives. My RAID went critical and split the drives. One drive was listed as LD 2 -1. The other is listed as <single disk>. I was able to unplug either individually and boot into windows. I decided to erase one of them and planned to rebuid the array afterwards. At this point, I can see the erased HDD in BIOS and in RAID setup, but it will not boot to Window with the erased drive connected. It starts to boot into Windows, then gives a brief flash of BSOD, then reboots itself.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved