So, I have several different printers set up for different wireless networks that I connect to; the only problem is that Windows never refreshes or updates my default printer when I connect to a different wireless network.
If I go into the "Manage default printers" and click the network and printer combination (stored in the saved list below) and then click "Update" it will successfully update my default printer to the one it should be. However, that's kind of a pain to have to go through several menus just to update my default printer--it would be faster to do it the old-fashioned way (right click the printer and click "set as default printer").
Any ideas on why this isn't updating correctly--I haven't yet seen it update since setting up my default printers. Or, should this go in a different topic than Networking & Sharing?
I click on Devices and Printers. I right-click my Printer, then click Printing Preferences (it's a network printer). I change the Original Size to A4, then click apply. When I try to print, the Original Size is wrong! When I go back to my printer's preferences, my change is not there anymore.
I have a 64 gb ssd, which I use as the boot drive, and a 1tb hd I want use as a game/data drive. Most programs would ask where to install or you can choose a 'custom install.' However, there are a few which automatically start installing on the default/boot drive without making a user inquiry. This PC is my first build, but I'm thinking that boot problems are usually solved through bios, while program installations problems are solved through the OS. I've tried disk management, i.e. an unsuccessful attempt to change disk 0 to disk 1 and vice versa, but to no avail
I have an MX850 and an MX870 printer both connected to my LAN.I also use an application called CD Label Print. When I started that program I noticed that there were 3 MX850 printers listed, the original and a (Copy 1) and (Copy 2).So I went to devices and printers and saw there was a MX850 and a MX850 (Copy 2). No (Copy 1). So I removed the (Copy 2) printer and fax.I went back to CD Label print and saw that it still said MX850 and MX850 (Copy 1). Went back to devices and printers and sure enough, MX850 was gone and MX850 (Copy 1) was present. So I pressed F5. It changed to MX850. Press F5 again, it changed back to MX850 (Copy 1).It changes non-stop. It alternates betweem the two settings every time I press F5.I've tried uninstall re-install. I've also contacted Canon support who are dumbfounded. I also had to manually remove the registry entries and start menu entries because the canon uninstaller doesn't so it.I cannot use CD Label print. Each time I try to print a label it insists on asking where to save the file, rather than printing it.
Somehow I changed the background in windows and now everything is HUGE. I managed to find a browser to work and that is visually "ok." But everything in my computer is out of reach due to the size of all icons, fonts, etc. How can I get it changed back? I can't even get to system restore to go back to a restore point.
How can I change the default My Documents folder from SSD to HDD, so that everytime I save a documents or data and or download a software from the Internet it will not save on the SSD instead it will save on the HDD auotmatically?
How to I change the default save location of any saved file from C drive to D drive?How to delete current user and program folders on my C drive? Info:I am trying to tidy up my computer and need some assistance with default save locations.I have 2 drives, A 60gb SSD (c:drive) and 1TB standard HDD (d drive). I have my OS on the C drive. I currently have 12gigs of information between two default folders named programs and user. Also when I download, files automatically go to c drive/users/andrew, I get no say in the choice, I want all files going to D drive.All I want to do is remove them from my C drive and have the default locations for any file saved to be to the D drive. This is because I only want select programs, i.e the ones I use regularly to be be on the much faster SSD c drive.[CODE]
I am new to Windows 7 and all my attachments from emails download to the defaulted "Download" folder. How do I change this so that I can choose where to save my files?
A few days ago I decided to install windows 7 7100 on my newly built desktop, unfortunately a day later i get an error called 651, i looked around and found out that it is a bug so i am resorting to a more stable os (vista...but only for now) and i am trying to boot it from daemon tools becuz my dvd copy has trouble booting, but every time i try to install it, it keeps trying to install the OS on my system partition and gives me an error that says there is not enough space available.
So my question is, how can i change the default drive letter that windows 7 gives to Daemon Tools?
I find it folly to install my applications on the C drive, especially the larger applications. Doing so makes the C drive so large that it is cumbersome to make the image backups that I think are necessary to insure an easy recovery from any problem causing a failure to boot. In WinXP, there is an easy way to change the default install location by changing ProgramFilesDir at HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindows Current Version. I changed that to a specific folder on my D drive and have used that for the last 8 years with no problem. It appears this registry key is only used by install programs to let them know where you want your programs installed.I really miss this wonderful feature in windows 7. Actually windows 7 has the same registry key, but unfortunately it does not seem to be used for the same purpose. I'm not sure exactly what it does, but at least for some programs, Windows seems to use it as a path to find the program when it is to be executed. Of course that would make little sense because there would be no way to actually change the key without breaking something. (What sense is there in having a registry key that can't be changed?). I have tried changing this key on two different systems and eventually it did lead to problems on both systems. So now I'm back to laboriously changing the path from C:program files or C:program files (x86) every single time I install an application (which it turns out I do quite often).
Is it possible that a script could be developed to search for C:program files or program files(x86) in an edit box and replace it with my preferred path with a single hot key? That would at least take most of the drudgery out of it, although it would still require choosing the "custom" install on many applications, not to mention the occasional errant applications that always install to the default install path with no chance for user intervention.
I just upgraded from 32 bit to 64 bit windows 7, I have two harddrives, a 40 gig for my os (C and a 1 tb for everything else (D. That's how it was on the 32 bit system, but now on 64 bit, there are more folders to mess with (Program Files and Program Files x86). How do I tell windows to install to the bigger D: drive and not fill up my small C: drive? Also, the programs that were already installed on my D: drive, will they need to be moved to the x86 folder, reinstalled, or can I continue to run them from their current location?
I want to change the default directory of my Internet access files like the Temp,cookies, download etc to a new hard drive. Actually, all data is stored in my SDD drive and I want to displace them to a new location.
I open the WIndows 7 file manager by right-clicking on the start button and then choosing Open Windows Explorer. It always defaults to Libraries, but I would rather it defaulted to C: Is there a way to change this?
Is there any way of changing the default pop-up menu of the Start Button? I would like to be able to simple click on the Start Button and have the "All Programs" menu selection displayed as deault instead of having to do two clicks each time (Start Menu followed by "All Programs"
Whenever I open Google Chrome, it opens really close to the bottom of the taskbar, and I always have to manually drag it into the center of the screen and maximize it. How can I set it so that automatically opens in the center of the screen?
I am a big fan of user account controls in Vista and Windows 7.
I would like to know how I can stop any and all newly installed programs from being able to change or affect my default programs.
I build and maintain computers and once I have installed and set up a new system I don't want any program to change my default programs. Not even win media player or Internet explorer if they update themselves.
Does that make sense.
I use GOM as the default media player and firefox as the default browser. But sometimes if there is a system update for media player, internet explorer or even iTunes and quicktime these programs sometimes after the update change my default programs.
Once I have finalized my install and set up my preferences how can I lock down the default programs permanently?
Home network with Wifi and ethernet. Using 3x Notebooks and 3x workstations. One of the workstations (W7 ultimate) keeps changing between Public and Home. When this happens, the internet connection dies. I cannot see other workstations either when on public network. Workstation using wifi. Does the same on cable. When it changes to Public, it disconnects from the internet and I cannot get to the router even though it has the workstation has an IP(DHCP or static). Default gateway and subnet is correct. TCP v4 is being used and nothing else is enabled.
Why is this happening? - I have tried DHCP as well as Static addresses - Reconfigured NIC(Netgear WG311T), uninstalled and reinstalled it. - Removed Wifi connection and re-added it. - Changed auth type, encryption type and keys to connection
Have I covered everything? The only thing different is that I installed a new router - Duo Plus 300wr. It cannot be the router because all the other notebooks connect to it wireless and so does my iPad, Android device and tablet...so it rules that out?
If you have a small but fast (or maybe not so fast) drive that you would like to ONLY run Windows off of and a larger separate HDD that you want to use as the install drive for all programs.In my case I have a 50GB SSD and a RAID0 array of 2TB. With space being limited on the SSD the best option for me is to install everything to the RAID array and leave the OS on the SSD. Mind you, you don't have to be running a RAID array to do this. That's just how my system is set up. You'll probably be better off just using a larger single HDD for stability reasons.And if you are doing a fresh install you should give this tutorial a look: User Profiles - Create and Move During Windows 7 Installation So the first step is to open REGEDIT. Simply click the Start Menu, type REGEDIT in the search bar and hit ENTER.Next look for the "HKEY_LOCAL_MACHINE" Once opened go to "SOFTWARE". There are two folder in this directory we will be editing. Note that the second folder "WOW64" is only for 64-bit users. If you are running 32-bit then the "WINDOWS" folder is all you will need to make changes to.Now from the "WINDOWS" folder you want to select "CURRENTVERSION". Simply click the folder itself not the arrow next to it. This is what you should see in the main window to the right of the directories. Now my registry settings have already been changed. Note that my secondary drive is "D:". Originaly everything here was set to "C:".
Once this is finished the 32-bit users are finished and can restart their systems. 64-bit users have one more step. Now you want to go to your "WOW64" folder. While I just realized I forgot to cut a snippet for this step it's fairly simple. Once in the "WOW64" folder you once again want to click the "CURRENTUSER" folder and observe the main window to the right.Just like in the "WINDOWS" registry you will make the same changes. Once you have implemented your drive your registry should look like this.Now restart your system. Though there is a chance you are completely finished I highly suggest running a command prompt session and typing "sfc /scannow". This will allow your system to scan for any conflicts in the internal settings and fix them.
I build, and then support many computers for my friends and family. I have recently started making them feel a bit more "manufactured" by using a factory-style recovery option (press F9 at boot to enter recovery / uses a hidden recovery partition etc...).
The issue I have though, is I often get asked to "wipe" someone's computer following a virus/malware infestation (and yes, I do supply AV, but that isn't always enough).
So, I use Sysprep to install all additional software, drivers etc... but the one problem I have is that I like to have, and usually always configure PC's to store items like Documents/Pictures/Music/Videos etc... on a seperate partition.
The problem is, when I configure this in Sysprep - the settings are lost when the user completes OOBE.
Ideally, I do not want to move the entire "Users" directory, I just want the libraries to never look at any folders on the C: drive, only the ones on D: (D:\%USERNAME%Documents etc...).
I want it so that when files "detect" where to save, it locates the appropriate directory on the D: drive, so they dont have to always manually locate the folders.
The reason I dont want the entire "Users" folder on D: is that following a restore or 2, it will get messy...
I would like to either automate this during setup, or would happily take a manual approach during Sysprep - as long as it applied these settings to all users as and when they are created.
I would like the cleanest way to do this, ideally without junctions/symlinks.
I did a clean install of windows 7 pro using sysprep to move my user files and program data to other drives. This works well as I only have a 120gb SSD running Windows 7 and a partition for Win 8 Pro that I haven't installed yet.
I changed the default installation path from c: to s: in both the 32/64 bit registry and now some of the programs (photoviewer, media player, defender) won't run. I've fixed the programs that I could, pointing those back to c: as I did not move any of the programs that comes with windows.
A few months ago I upgraded my PC and reformatted my main HDD (C Partition) to Win 7. After the reformat, I changed the default installation location to the larger partition (E) via adjustments in the registry through regedit.exe.
In Outlook 2007 Calendar, the default reminder time is 15 minutes. That is, Outlook will remind you of each appointment 15 minutes in advance. In ToolsOptions., I've tried to set the default reminder time to a shorter interval. But no matter what I set it to--10 minutes, 12 minutes, 5 minutes--Outlook keeps reminding me of each appointment 15 minutes in advance. In ToolsOptions, there's a checkbox called "Default Reminder:" Whether I check it or leave it unchecked has no effect on the reminder time either--Outlook keeps reminding me of each appointment 15 minutes in advance.
I have 2 copies of Win 7 installed, one on my lappy, the other on my main pc.
My lappy can see all my files on the main pc and share the printer no probs.
However my main pc cannot influence my lappy, although it sees it on the network.
The only difference I can see in the settings is that my laapy network is named 'home' on the work network, and my main pc is part of a network called 'network' on work network.
I guess I need to change the name of the network to 'home' on the main pc but can't find the route to do it. Funny the lappy can see the main pc but not vice versa.
One of the computer is windows 7 and the other XP SP3. Both computers have the same 4 user accounts. Win7 pc is set to share file/printer and public files with password. On the XP machine, I went to My Network Places, to the specific Workgroup, to the win7 computer, and folders. A windows dialog came up asking for user id and password. I put in an admin id and password on the win7 pc. Here is my problem. I realized I shouldn't be using that id. But, I can't find a way to change the id on the XP pc. I went to the user account, then manage my network passwords. But, there is no ID and PW
I am currently running Windows 7 64-bit off of an 80 GB SSD while storing the majority of my programs (and documents, videos, etc.) on my 1 TB other drive. I am quickly running out of space on the SSD and I think it has to do with the fact that it keeps my saved game files there in the User directory while some saves stay on the F (1 TB) drive. Is there a way to transfer/redirect the profile so that it defaults to saving in a User folder on my F drive?
I changed the values in HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindows NTCurrentVersionProfileList in order to move the default user locations to my second partition. I then created a new user profile but when I try to login I get the message 'The User Profile Service failed the login'. When I set these values back to normal, new accounts work fine but I really want my user accounts on the second partition.
