Slowed Down Boot Up?
Oct 2, 2011
i was in Cali for about 4 days so i left my pic on to remote access it from my iPhone (bf3 early beta was about to come out so i wanted to download it before i got back) any ways, when i came back i turned it off for the first time since i left and back on. since them my PC has been taking a lot longer to boot up. it use to take about 2 min, now it takes about 3/4. iv done virus scans with avast, did malwarebytes, i even did a system restore to before i left. nothing came up, so i don't know whats going on. i also randomly had my pc go into sleep mode wile i was on the internet.
View 9 Replies
ADVERTISEMENT
Dec 5, 2012
After log on for roughly 3 minutes or so the PC load times for most things are quite slower than usual. I can hear the HDD spinning being read and written to i presume.Under task manager processes tab (inc all users) the main culprits for CPU usage are a few svchost.exe (mainly PID 948 which includes windows audio endpoint builder, which is also the one that uses the most memory)After i stop hearing the HDD work which is usually when the processes stop jumping around the PC speed ups dramatically and to the speed that it should be.This happened gradually as the PC got older etc more programs installed.But this is my confusion, i have NO crap if you like on here just needed programs like office, Norton 360, Itunes, a few games and few others random things.I watch carefully what i download and scan the whole system every now and then with Norton 360, spybot S&D and malwarebytes. There is usually nothing there.I use Ccleaner and clear up everything once a month and also clean the registry.My msconfig.exe boot settings are cut down to barely anything, about 8 things max including my catalyst control centre. The non microsoft services are all enabled currently there is only 9 all kind of essential to me.
One thing that does effect this is if i do not enter password straight away on boot and leave for few minutes it shaves the startup time down alot which doesnt that point to microsoft services only?I do not overclock, temperatures are always fine too and all windows updates are installed.
View 1 Replies
View Related
Jul 16, 2012
My samsung 830 ssd (256 gb) was working excellently and last night for some reason it decided to no longer boot at the nice speed at which it did before. Now I believe it is still performing up to par in the OS environment due to my AS SSD score being 724, although I have not seen many others to compare to.The system originally would boot in a time of 15-16 seconds. however, after this error: The boot time jumped to around 30 seconds.The error occurred yesterday night, and I believe I played around with Samsung's SSD Magician Utility, allowed it to "Optimize" the OS, however I am not sure if this was at the time of the reported error.Here is what I've tried so you may dismiss possible solutions
-Flash Bios
-Update SSD Firmware (was already the Latest)
-Re-Optimize through SSD Magician
-Disable Prefetch and Superfetch in regedit
-Unplug My optical Drive from the SATA3 port
-Unplug the SSD, allow the system to enter bios, turn off, then plug in again, to no avail.
-Lastly I uninstalled SSD Magician hoping that the program was the cause of the error, yet that is a no as well.
View 9 Replies
View Related
Oct 21, 2012
I am using this Laptop for a couple of years, and lately I have noticed that it runs quite slow sometimes.While it generally working fine (running new games such as BorderLands 2), other actions such as simply browsing with my Firefox or installing applications can become problematic.The Firefox sometimes gets stuck (happened to me a couple of time while writing this), becomes unresponsive and asks to wait or close. After a short wait, it gets back to normal.The problem with installing is a lot bigger. It takes about 5 minutes for windows to understand that there is a request pending for installation (set so it asks me before installing), and then installs very slowly.
View 14 Replies
View Related
Dec 30, 2011
At the beginning of the problem when I booted up my computer, I would check to see if the built-in wi-fi was working. If it wasn't, then it would freeze up at some point (usually soon after) and I was forced to restart. Whenever I booted my computer up and saw this problem, I restarted immediately. If the wi-fi was working, then the computer functioned normally. This was only an occasional problem, so I was able to deal with it by restarting when I found the problem.Then, a couple of weeks ago, my computer automatically forced a hard drive scan upon startup and found 4 corrupted segements on my disk. Next time it booted up, it scanned again and the errors had dissapeared.
Unfortunately, my problem worsened yesterday. When I booted it up, everything has significantly slowed down. It hangs on the Windows screen before I choose my profile, after I choose my profile, when it's loading my profile, and when I perform any task. I tried to start it in Safe Mode and found the same problem. I've found that if I just wait around (usually about 30 minutes), the computer catches up to itself and can perform normally for a while until I start to perform a demanding test. Then it hangs again. Can anyone identify a probable problem? It seems like it is a hardware problem mainly because it isn't an isolated event.
View 2 Replies
View Related
Nov 27, 2012
In the past couple of months my win 7 Windows Explorer now takes up to 20 seconds of searching to finally land on the folder selected. This is much slower than it used to be. I guess I'm not at all knowledgeable on what the search process is when one loads Windows Explorer so I don't know where to look for problems. Generally, what things slow the search that Win Explorer goes through to load itself. Would a 3rd party file manager be a better bet rather than a long term investigation to find the problem in my system? I'm a good housekeeper on my machines but something is slowing Win Exp down markedly.
View 5 Replies
View Related
Feb 20, 2011
My pc specs are:
[code]...
bought my pc a few days ago. After installing all the drivers I decided to play Splinter Cell Conviction and the graphics ran perfect on max settings with max AA and AF, except the mouse felt like it was delayed a quarter/half second. So basically it became impossible to aim. Decided to try Quake Live - exactly the same, but it got fixed after turning vertical sync off. Checked on world of warcraft, at some areas it's more, at some less intense, but it definitely is there.It feels like the cursor on the screen is delayed half/quarter a second compared to how I move the actual mouse.In world of warcraft there in an option in video settings 'reduce input lag'. When turned on everything is perfect, but fps drops from ~60 to ~40.It's the first time I use windows 7 x64 so I might have missed something, or maybe even installed some wrong/old drivers, or just don't know something.then trying to fix it for the past 2 days. Checked some topics on this forum, but didn't find any fix either. Really could use a hand.
View 18 Replies
View Related
Jun 1, 2011
The issue is that all system functions, opening start menu, running control panel, opening folders or running internet explorer run extremely slowly, taking around 5-10 minutes to load or failing completely. Explorer.exe constantly fails and tries to restart. Safe mode seems to work like normal, no speed issues, he has since said it has run slow in safemode (he's not exactly happy right now, and so is snapping at me when i ask him about it so this could be a lie). The CPU is running at 1-2% constantly, i checked performance monitor idle time for it and it is consistantly showing high idle time so it's not like its thrashing. I have limited knowledge of his pc specs, i know he's running a 2.8ghz quad with 8gb ram (speed unknown but i doubt it'll have a relevance). I ran a sfc /scannow but came up with no errors, he doesn't have a restore point set (helpfull much?) and we cannot really access his antivirus effectively due to the whole speed of the system (2 hours before i managed to successfully open event viewer for example) Event viewer shows a number of issues which i will be able to provide more detail about tomorrow morning when he has calmed down a bit. We've tried to run the windows 7 disk however theres not a fix option, i'll be doing manufacturer default restore at some point probably if no solution is found (failing that a format and reinstall maybe?) however im hoping someone online can shed some light on the whole situation, something i've missed maybe. The biggest issue is it being so difficult to try to fix with it taking such a long time to open anything. This is a new custom built pc (from a website) and im assuming the components themselves are ok, (cpu or hdd broken and it wouldn't start, same with ram but im assuming a warning would of shown, and unless he's lost 7gb in one go i doubt it would show much performance decrease...) the system seems cool enough from general feeling around it, cold air being sucked in and blown out (obviously while idle but even so).
View 3 Replies
View Related
Dec 12, 2012
My laptop has suddenly slowed down considerably. I've run eset online scanner and scanned with my antivirus Trend Micro Titanium and found nothing at all. I've tried running Ccleaner and using the registry cleaner. I've also tried defragmenting my hdd but nothing is working. Overall its is generally slow but alot of the time Windows explorer freezes and stops responding and needs restarting.I have an asus K55VD notebook with Windows 7 Home Premium SP 1, quad core i7 processor, 8gb ram, 2gb dedicated graphics and over 200gb of free space on my hdd. If it makes any difference I have windows 8 installed on a separate partition although problems didn't start when I installed it.
View 14 Replies
View Related
Nov 13, 2011
I have for some time had problems with my computer slowing down and suffering from frequent bouts of 'Not Responding' on applications, mainly Internet Explorer and Microsoft Word, PowerPoint, Excel.My computer is now at the stage where it is periodically unusable?
View 2 Replies
View Related
Dec 23, 2011
I bought the Razer Lycosa tonight and plugged it in looking forward to using it but upon loading the computer my bios has gone so slow i see each letter as if it's being typed out and cannot load windows.I have plugged in another keyboard and managed to open my BIOS (blue menu bit). I'm not technical really I just liked the look of the keyboard. I think it's a software related issue?Above all I need my computer back working but has anyone come across this before?I noticed I had some windows updates recently and also read a similar thread of which I can no longer find on this web site.
View 7 Replies
View Related
Oct 31, 2012
In recent days, my computer extremely slowed down. A few months back, it started booting up really slow but I didn't mind it. It was working well, although if you opened a program too quickly before the system started, it would freeze. The fan is running full speed 100% when the computer is on. I ran Malware in safe mode, found one threat but didn't work. I tried services, turned them all off, didn't work.
One important thing to mention is that I can't type anything in explorer. If I open Menu Start and try to search for something, it will freeze. Same in explorer window. I can't delete a file with the DELETE key, I can't use CTRL+C, CTRL+V because explorer freezes. Right click works, though. I'm working on MSI FX603 laptop with i5 Intel Core, GeForce 425M and 4GB Ram. I just updated Graphics, Network drivers. No luck.
View 9 Replies
View Related
May 17, 2011
I am having a confusing time trying to figure out why my internet went from 10+ Mbps down to <1 Mbps after simply downloading a wireless card driver.From the beginning: My wireless download speed was 10+Mbps, and I was using the Dell Wireless 1505 Draft 802.11n WLAN Mini-Card. This information is found in the Device Manager, under "Network".The driver for the card was 5.30.x.y (I can't remember the specific version number, but I do remember it was 5.30.something.something). Upon navigating to the Dell webpage, I wanted to see if there were any drivers for the same wireless card that were more updated, to perhaps increase performance.I navigated to the page for my computer (Dell Latitude D830), here. That page is for my model laptop. You'll notice that, in the drop down for "Operating System", there is no option to select Windows 7.Regardless, I navigated to the driver under "Network", the Dell Wireless 1505 Draft 802.11n WLAN Mini-Card, and downloaded it. It was version 5.60.188.1, from 11/9/2009. This is where my problem began. After installing the driver and rebooting, my internet speed instantly went to below 1 Mbps. I have no clue why installing a later wireless card driver would mess up my speed.
My only hypothesis is that the driver I downloaded is only compatible with Vista. Do I just re-download driver version 5.30.x.y or something to get it back? Why did it get so slow? How do I get my computer back to the download speed it was/should be?
View 1 Replies
View Related
May 17, 2011
I am having a confusing time trying to figure out why my internet went from 10+ Mbps down to <1 Mbps after simply downloading a wireless card driver.From the beginning:My wireless download speed was 10+Mbps, and I was using the Dell Wireless 1505 Draft 802.11n WLAN Mini-Card. This information is found in the Device Manager, under "Network".The driver for the card was 5.30.x.y (I can't remember the specific version number, but I do remember it was 5.30.something.something). Upon navigating to the Dell webpage, I wanted to see if there were any drivers for the same wireless card that were more updated, to perhaps increase performanceI navigated to the page for my computer (Dell Latitude D830), here. That page is for my model laptop. You'll notice that, in the drop down for "Operating System", there is no option to select Windows 7.
Regardless, I navigated to the driver under "Network", the Dell Wireless 1505 Draft 802.11n WLAN Mini-Card, and downloaded it. It was version 5.60.188.1, from 11/9/2009. This is where my problem began. After installing the driver and rebooting, my internet speed instantly went to below 1 Mbps. I have no clue why installing a later wireless card driver would mess up my speed.My only hypothesis is that the driver I downloaded is only compatible with Vista. Do I just re-download driver version 5.30.x.y or something to get it back? Why did it get so slow?
View 6 Replies
View Related
Jan 4, 2012
[code] Reboot and select proper boot device or insert boot media in selected boot devic &press any key
View 4 Replies
View Related
Mar 21, 2012
when I turn on my pc I get the follolwing error message "Reboot and select proper boot device or insert boot media in selected boot device and press a key".
View 1 Replies
View Related
Dec 1, 2012
I am having a problem starting my PC! I have to start it in the boot menu under the RAID option. If I do not do this a message saying "Reboot and select proper boot device or insert boot media in selected boot device and press a key.." comes up, and just keeps popping up regardless of what I press! I would try using my boot disk but for the life of me I can't find it, and as windows 7 was already installed on this computer when we got it 3 year ago, I can't accurately recall if it came with one!I am no expert on BIOS, but I have read other problems similar to this one, and know that if I don't have the boot disk or the OS disk, I will need to know that at least.I am curious if the (Hard drive) is the issue. The BIOS tells me that anything in parentheses is disabled from corresponding type menu.
View 7 Replies
View Related
Oct 25, 2011
I recently received a new laptop. After starting after time with no problems I received a blue screen with Verticle black stripes then it shut off. After attempting to reboot it I receive this error in a black DOS like screen.
"Intel UNDI, PXE-2.1 (built 083)
Copyright (C) 1997-200 Intel Corporation
This Product is covered by one or more of the following patents:
US5,307459, US5,434,872, US5732,094, US6579,884, US6115,776 and
US6,327,625
Realtek PCIe FE Family Controller Series v120 (01/26/10)
PXE-M0F: ExitingPXEROM.
Reboot and select proper Boot device or Insert Boot Media in selected Boot device press a key"
View 2 Replies
View Related
Nov 24, 2011
i am facing problem while booting before Reboot and select proper boot device or insert boot media in selected boot devic this screen is coming
View 1 Replies
View Related
Sep 5, 2011
When it crashes the cursor still moves and sometimes I can move windows around but then it all shuts down and sometimes briefly shows a blue screen of death. On reboot I sometimes get this message and have to reboot again. "Reboot and select proper boot device or insert boot media in selected boot device and press a key"It's a brand new box just built last week but no warranty and I would not even know what part to replace if it's hardware related.I've attached a Hijackthis to the post if it helps but I don't think it's virus related at all.
View 4 Replies
View Related
May 13, 2012
When left alone..."Reboot and select proper boot device or Insert boot media in selected boot device and press a key"I have a new(ish) cpu that I bought last Christmas, it works great and it has not crashed on me whenever I am using it. However, when I leave it on overnight (usually when it is downloading something big), when I wake up in the morning I am greeted with a black screen with the words:"Reboot and select proper boot device or Insert boot media in selected boot device and press a key"When this happens I simply press the power button a few seconds to turn it off, then turn it on again and it boots normally. (pressing a key only results in the message being repeated)What infuriates me is that it only ever happens when I leave it on overnight so I don't know when and how exactly it occurs but it almost always does. Like I said earler, it never does this when I am using it as it works fine otherwise. It just won't stay on overnight when I need it to.
System info:
Windows 7 ultimate x64 (full retail, installed once from scratch)
Intel core i7 4200k
Nvidia Gtx 560ti
16gb RAM
Seagate 500gb hdd for OS, 2Tb samsung and 1Tb seagate hdd for storage (all internal drives; no external drives attached)
Connected via hdmi to Pioneer receiver vsx 1121 then to 42" 720p Panasonic Plasma Tv
View 4 Replies
View Related
Dec 27, 2011
So I have been trying to get my computer running for a few days now. At first it wasn't booting at all, it would be a black screen with a blinking cursor. I have cleared cmos a few times, turned psu off, drained charge from psu, turned psu back on and got it working that way for about 10 minutes, then it crashed. Ever since then I can't get it to get running again. I think it says something about "fatal error" and then goes on telling me to boot into safe mode to remove any new hardware. Is it a hardware problem I'm having? If so, I'm screwed, too broke The best I can get is the screen where it says run windows normally or run in safe mode. But it will just crash on either option I pick. And when I try to run from the dvd drive with my windows 7 disc it's just a black screen with a blinking cursor. I'm not sure what to do...ugh I feel like it's something really simple to fix. I left my computer sitting for a few months and havn't tried to boot it until recently, so I don't remember if I put any updates on it or not.
View 6 Replies
View Related
Feb 2, 2012
i left my computer on in the morning and i come back and see this message reboot and select proper boot device or insert boot media in selected boot device and press a key i just installed windows 7 64 bit yesterday and built the comp a few days ago here are the specs
RAIDMAX HYBRID 2 RX-630SS 630W ATX12V V2.2/ EPS12V SLI Ready CrossFire Ready Modular Modular LED Power Supply
G.SKILL Ripjaws Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model F3-12800CL9D-8GBRL
Western Digital Caviar Blue WD3200AAKX 320GB 7200 RPM 16MB Cache SATA 6.0Gb/s 3.5" Internal Hard Drive -Bare Drive
intel core i5-2500k
ASUS P8Z68-V LX
iHas 124b
View 1 Replies
View Related
May 7, 2012
I am running an Advent desktop PC and its stats are as follows; Intel Core i5-2310 CPU @ 2.90GHz 8GB RAM Win 7 64 bit.The problem I am having is when ever i boot up the computer it shows the Advent logo-screen where I can access the boot menu etc but then it goes to a black screen with a cursor/underscore flashing in the top left... This screen stays for quite a while and I am not sure if it stops because of a key I have pressed or just because it has run its course but after it disappears the computer goes back to the logo-screen for a moment and proceeds to boot up as normal except slightly slower than usual.It is a relatively new computer and it has no problems running at all once the boot up is complete it is fast and as friendly as ever.
View 4 Replies
View Related
Aug 11, 2011
I'm busy installing a computer for a friend but we're stuck at an error.This are the computer specs to start with:
Asus P8P67-M Pro Rev 3
1 TB Samsung Spinpoint F3 HD103SJ
Intel Core i5 2500K
Corsair 8GB 1600 mhz
Scythe Mugen 2 rev B
GeForce GTX 570
Lian Li Lancool PC-K56
Corsair CX 600W
Optiarc AD-72605 DVD RW SATA
The BIOS boot priority is 1# Dvd Player and 2# Harddrive (so it detects both).It's also a SATA harddrive so I don't need to do anything with jumpers.Then when I insert the Windows 7 DVD it outputs the following error:reboot and select proper boot device or insert boot media in selected The PC is new and got build at a store so the only thing I need to do is install the software.
View 11 Replies
View Related
Nov 20, 2011
Just installed a new Seagate Barracuda 500 GB replacing an exact model that has failed."Reboot and select proper boot device or insert boot media in selected Boot device and press any key."When I plug the old C drive back in it boots, but the new one won't. What should I do?
View 1 Replies
View Related
Jan 24, 2012
My laptop shows the following message when I turn it on- Realtek PCIe FE Family controller Series v1.19(08/10/09) PXE-EGI-Media test failure,check cable PXE-MOF-Exiting PXE ROM
Reboot and select proper boot device or insert boot media in selected boot device and press a key. I am using a Dell Inspiron N5010 with windows 7 OS.
My BIOS boot priority:
1st boot Hard Drive
2nd boot cd/dvd/cd-rw drive
3rd boot USB storage
4th boot Diskette drive
5th boot eSATA
6th boot Network
View 7 Replies
View Related
Feb 2, 2012
i left my computer on in the morning and i come back and see this message reboot and select proper boot device or insert boot media in selected boot device and press a key i just installed windows 7 64 bit yesterday and built the comp a few days ago here are the specs
RAIDMAX HYBRID 2 RX-630SS 630W ATX12V V2.2/ EPS12V SLI Ready CrossFire Ready Modular Modular LED Power Supply
G.SKILL Ripjaws Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model F3-12800CL9D-8GBRL
Western Digital Caviar Blue WD3200AAKX 320GB 7200 RPM 16MB Cache SATA 6.0Gb/s 3.5" Internal Hard Drive -Bare Drive
intel core i5-2500k
ASUS P8Z68-V LX
iHas 124b
View 2 Replies
View Related
Apr 11, 2012
I just changed my PSU and upgraded my graphics card today. I tried booting it up and it came up with this message "reboot and select proper boot device or insert boot media in selected boot device and press a key."I'm pretty sure I got all the cables in correctly and I only have one harddrive. No externals.By the way, I don't have my windows 7 CD because I let a friend borrow it and I won't be able to get it back for some time. However, I do have a Windows XP CD if that helps in any way.
View 1 Replies
View Related
Jul 19, 2012
i dont have the proper boot device?
View 2 Replies
View Related
Mar 26, 2011
I cannot boot into Windows because it says that the file /boot/BCD is missing with an error code of 0x0000007. If I run Repair from my installation disk and in System Recovery Options, it says that it has detected problems and asks if I want to repair it. The items it wants to repair are: " The following startup option will be repaired:Name: {bootmgr}Identifier: {9DEA862C-5CDD-4E70-ACC1-F32B344D4795}
The following startup options will be added:
Name: Windows 7 Ultimate (recovered)
Path: Windows
Windows Device: Partition=C: (476938MB)
Name: Windows Recovery Environment (recovered)
Path: Recovery9426aa67-30ff-11e0-a348-506313b5e718Winre.wim
Windows Device: Partition=C: (476938MB)
A copy of the current boot configuration data will be saved as C:BootBCD.Backup.0002"If I click yes, it says that it cannot save the current settings for the BCD and refuses to continue. When I choose Startup Repair, it attempts to fix the problem but fails.
The problem details are:
Root cause found:
No OS files found on disk.
Repair action: Partition table repair
Result: Failed. Error code: 0x3bc3
I think that this is because Startup Repair is trying to fix the thumbdrive that I keep my Windows 7 install files in. I am overseas now and as my computer does not have an internal optical disk drive and my external drive is back home, thus using my thumbdrive is the only way to access the repair console.
I tried running a few commands, namely:
bootrec /fixmbr
bootrec /fixboot
bootrec /rebuildbcd
Fixmbr and fixboot work, but when I run RebuildBCD, it detects C:Windows as having a Windows installation, but if I type Y(yes) or A(all), it says that the requested system device cannot be found.
View 4 Replies
View Related
