Slow Boot Due To Slave Drive
Jan 26, 2010
I have recently upgraded my computer from vista 64bit to win 7 64bit. I am usually ok with computer problems, but this one has stumped me. I use 2 hard drives. One 500gb SATA for OS. The other is a 250 Seagate IDE slave drive. Everything has been good since back in my xp days. Until this week when I installed windows 7. It takes about 10 minutes for my computer to boot into win 7 OS while my slave drive is plugged in. When I unplug the slave drive my computer runs very nicely.
SPECS:
ASUS P5Q-Pro
Intel 8500 -OC to 3.8 from 3.16
8GB DDR2 RAM
If any other specs are needed I have no problem giving the information.
View 3 Replies
ADVERTISEMENT
Apr 12, 2011
I have a OCZ RevoDrive 120Gb I recently installed as boot drive C:, for Windows 7 64bit and it is running fine.I want to install WinXP 32bit on my SATA slave drive, but not sure if it is as simple as booting to DVD drive and selecting a partition on my SATA drive and loading it, or because the REVO is now the boot drive if there is more involved.
View 5 Replies
View Related
Sep 9, 2011
I installed a new hard drive, and then installed windows to that new hard drive with the old one still connected and I now the two drives are somehow, linked so that if I remove the old drive, windows doesn't boot. When I reconnect the drive, windows boots up fine. I checked the boot priorities in the bios and its all as it should be.
I tried the windows repair disk, used the top option three times (as I've seen recommended on other forums), to no avail. I've tried the other options but the problem is, the windows installation is not detected, same with restore points, nothing works.
I think there's something to do with the Disk Management utility. I have the two disks, disk0 and disk1, disk1 is the disk I want to remove.
this is what the page looks like:
disk0 (boot, page file, crash dump, primary partition) disk1 (system, active, primary partition) + (8mb unallocated)
It seems the System-(thing?) is on disk1 so when i remove the drive, the computer doesnt boot. Makes sense. What doesnt make sense is that windows ISNT installed on that disk so why the hell is "system" on there and causing trouble??
Would making the partition on disk0 active solve my problem? I dont want to click on anything and break it so I ask here.
View 3 Replies
View Related
Jul 7, 2012
My Win 7 drive refused to boot, refused to repair and refused to restore.I slotted in a spare little Win 7 drive, booted okay, can see the 'dodgy' drive, can see the data and need to know if I can fix it in this way to become my bootable drive as it is full of programs I would rather not have to spend hours reinstalling.I have Win 7 home premium for my sins.
View 3 Replies
View Related
Oct 7, 2009
I am a first time Windows 7 user, coming from XP. I read that you could not go directly from XP to 7 without having Vista first, so I did a full wipe and format of my drives and installed 7 last night.
I noticed that I could not access the newly formated slave drive through the computer, but I could see it in Device Manager. As seen here:
I am unsure whether this is because of something I had done unknowingly during installation or by chance something entirely different. Might anyone have an idea?
View 4 Replies
View Related
Sep 27, 2009
Can I do that? I have windows XP right now and i was thinking about buying another hard drive, making it a slave, and installing windows 7 on the slave drive so that i can keep XP on the master drive and have a dual boot setup. Is there any problems i would encounter or does it sound ok?
View 5 Replies
View Related
Jul 2, 2012
I have a win 7 hard drive that would not boot up. So I purchased a USB 2.0 to Sata/ide hard drive adapter in hopes of accessing the drive to copy the users files off of the drive. I see the drive in disk manager and it says that the drive is healthy & encrypted so enter the bitlocker recovery key for the drive, butI get the following error: 'f: is not accessible. The parameter is incorrect.
How can I get the data off of this drive?
View 2 Replies
View Related
Jun 23, 2011
I've recently upgraded to Windows 7 and I'm having problems. I had originally used IE 9 but i was having so many problems i went back to using IE 8. Right now the problems that i'm having are, Windows 7 does not recognize my slave drive and it will not let me open an external link for a new window from an open window (thus i can't even verify my e-mail address for the game i want to start playing). Oh and one other thing, i keep getting a message that says i'm not running a valid windows program. Any help in this matter would be greatly appreciated. I've included the TSG SysInfo as well.
Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Enterprise , 32 bit
Processor: AMD Phenom(tm) 8400 Triple-Core Processor, x64 Family 16 Model 2 Stepping 2
Processor Count: 3
RAM: 2942 Mb
Graphics Card: NVIDIA GeForce 6150SE nForce 430 (Microsoft Corporation - WDDM), 128 Mb
Hard Drives: C: Total - 305142 MB, Free - 247178 MB;
Motherboard: ECS, MCP61PM-GM, 2.1 , OEM
Antivirus: AVG Anti-Virus Free Edition 2011, Updated and Enabled
View 5 Replies
View Related
Dec 5, 2009
I have a second internal hard drive with data. Currently it is the slave. I have tried cable select with the same result. Disk management sees the drive but I cant assign it a letter. All options under Task -> All options are greyed out except delete volume. How do I give it a letter so I can access the data?.
View 4 Replies
View Related
Feb 6, 2012
I have two hard drives one 40gb(IDE) and a 2tb(SATA). I have my 32bit OS installed on the 40gig and all my data on my 2tb. Now I recently got more ram and now need to install 64bit.
My question is can I install the 64 bit on my 2tb and have a dual boot.
I'm installing Windows using a setup that I Downloaded that has a few tweeks added in so no disc to install from just a setup file.
View 9 Replies
View Related
Apr 10, 2012
quick breakdown. Ive installed windows 7 onto my ssd (primary drive) and updated and installed all drivers. so its now a blank canvas. ive got a 500gb wd hd which has all my programs, data, pictures etc on it, including the old o/s.files and folders I can easily backup and move across as i please but ideally id like to keep the ssd relatively clutter free. (for games, data hungry apps)do i need to back that old drive up, reformat it and start again, installing the same programs to it minus the o/s?or does anyone know if i can run those original programs from a slave drive and if so how can i access them in the new o/s?in particular things like antivirus programs, itunes (which has a 130gb library) and so on which are already installed on the old drive but at the moment inaccesible as programs except for their folders.
View 3 Replies
View Related
Jan 24, 2012
New win 7 pc, had old HD fitted as slave drive, can see & move photos across but wife christmas card mail list (all I really need from old docs) will not view/move/print. If they can be moved there does not seem to be a labels template in win 7 word pad. surely the designers should have expected home premium user to want to write a few labels once a year!
View 4 Replies
View Related
Sep 20, 2012
find a solution to how open sata slave and master hard drive on a desktop
View 1 Replies
View Related
Feb 8, 2012
I know there are a myriad of slave drive access issue posts on here. My thing is that I've managed to take ownership of my slave drive; formerly in a tower - now trying to access it thru my windows 7 laptop. Ive taken ownership of " my documents," but it doesn't seem like it took; I still have to take ownership of every folder in it individually when I go into it. Furthermore, when I going into my music or video folders - I get a "file not found" error when I try to open the files.
View 1 Replies
View Related
Mar 14, 2012
I was having no problems with my Windows 7 X64 bit till I plugged in a USB floppy and copied some photos to the hard drive. The windows portion of the boot went to approx 5 times what it was. I have disabled all the boot devices except the hard drive and have uninstalled the driver that Windows 7 installed when I plugged in the floppy.Runs fine after the boot.
View 5 Replies
View Related
Aug 10, 2011
i want to make my spare sata hard drive as a slave my master hardrive is also satahow to do it . my OS is win7
View 4 Replies
View Related
Nov 18, 2011
I bought this Fujitsu laptop for less than a year. Its only for my school work. It takes forever to bootup, startup and it sometime hangs when I open up a program or typing.For the bootup, it takes very long time on the window logo, after that the black screen, followed by the welcome page with the loading cursor. Each of this process take a long time. For startup, its not so long but its still quite lag. For the opening up of program and typing, everytime I open up my visual studio, it will take a long time to show up and even if it showed up, it will be "not responding".So I will have to open it a second time before I can start using itWhen I am typing my codes, it will randomly hang and show that the program is not responding. I am still able to move my cursor though.
View 9 Replies
View Related
May 8, 2011
I just received my external enclosure which I will use my FAT32 drive, do I set It to master or slave Setting? Just want to save a little time and be sure I'm not fighting with Win 7 Settings.
View 3 Replies
View Related
Sep 13, 2011
just bought a new computer for my business, it is windows 7. I have a lot of customer information and a program on my old computer that is a windows xp home edition. Can I slave the old one so I can run both and not have to transfer over any files?
View 4 Replies
View Related
Apr 2, 2012
Gathering a Startup, Shutdown, Sleep, Hibernate, or Reboot Trace As cluberti said, the trace may not show useful data as it came after a BSOD - I have not been able to get a startup trace without error messages coming up at the end: I can avoid BSODs by removing the +DRIVERS part of the string, but I still cannot end up with a proper boot trace for some reason (please see the above thread for details of the error message I get).This trace is the one gathered after a BSOD. I have another trace which measures 3.5GBs in size - no idea why so large, I guess part of the error ('can't stop trace'). Can't upload it anyway.
View 9 Replies
View Related
Jun 2, 2012
I am using Asus UEFI M5A97 motherboard. I have GPT formatted WD30EZRX Caviar Green 3T. The OS is Win7 64-bit Ultimate. The system is working fine with that hd. I have another hd WD2002FAEX, a Western Digitial 2T Black edition. On it, there is also similar OS Win7 64-bit Ultimate. This one is formatted in normal MBR. It is also working fine on its own.The problem arise when I am attaching both the hds on the system. I want to boot on the 3T and to treat the 2T as secondary (slave). When I do that the system does not boot. So far I am not able to configure the BIOS to make it work. After a few trying with the BIOS settings, the system manages to boot on the 2T but that is not what I wanted.
The only way I could use all the hd is by 'brute-forth'. I think that's the term. I make use of hds hot swapable. Leave the side cover open at all times. Plug the power cables to all available hds (but not the sata cables - the cables are plugged onto the board only). Plug the sata cable to the 3T drive and boot the system. When the system is up, plug the other sata cable to the other hd that I want to use as secondary. Plug in more sata cables to other hds if you need. I tried with four and the system recognizes them all.
View 6 Replies
View Related
Sep 18, 2011
whenever i boot up windows 7 ,i see the circle over the wireless network icon in the taskbar.It takes around 3 minutes to connect to the home network.Once the connection is established windows works fine with optimum speed.
View 11 Replies
View Related
Jul 23, 2011
My Computer is running Windows 7, 64 bit.
Everytime when I do a restart, it takes a while to boot up my PC. I forgot the procedure to cut those softwares from running up. The only thing I remember is unchecking some software in a list. So when I do a boot, it doesn't take long.
View 5 Replies
View Related
Jul 28, 2012
I recently build my first pc and it runs great. the only problem is that it boots real slow. here are my specs:
Graphics Card: Asus HD7970 GDDR5-DC2-3GD5
Memory: Gskill Ripjaw x 32gb (4x8gb)
PSU: CoolerMaster Silent Pro Gold series 1000w ATX
CPU: AMD FX-8150 AM3+ 3.6Ghz
MOBO: Gigabyte GA-970A-D3
CPU Cooler: Corsair H100
Case: Corsair Obsidian 650D
Boot Disk: Two OCZ Solid 3 60gb RAID 0
Storage: Seagate Barracuda 3TB 7200rpm
View 7 Replies
View Related
Jan 14, 2012
I'm not sure if this is the right thread, but I was forced to by a new cpu and have taken my old C: drive and hooked it up as a slave. Now I need to get the old emails to windows live messenger.
I also ordered another motherboard for the old computer and will at some point attempt to put the slave back in and hope it boots up normal so I may be able to work this that way.
I can't even find the outlook express emails, and Im not even sure if I could read them if I could find them. also, as most of you know, there is no outlook express for windows 7, so I don't know how common this problem is, but I can't find much that helps.
View 9 Replies
View Related
Oct 27, 2012
I have been noticing a gradual increase in boot time to the desktop - not actually sure when it was relatively normal. However yesterday it took so long to get there ( 5 minutes plus), I though it was not going to boot up. Did eventually get there after a few reboots.
This morning it's still slow but at least I'm getting there. System seems fine once it's up and running. This is what I'm getting;
Black post screen - seems to take a while to initialise USB controllers - around 30 seconds or so. Goes onto Windows splash screen - sits there for around 20 seconds.
Screen then goes black - monitor says "no signal detected" - sits there for around 30 seconds Welcome screen appears with whirring thing in the middle - around 20 seconds
Desktop appears but can take around a minute to fully load. Going into event manager and viewing the ID 100 log shows;
Log Name: Microsoft-Windows-Diagnostics-Performance/Operational
Source: Microsoft-Windows-Diagnostics-Performance
Date: 27/10/2012 10:57:58
[Code].....
View 14 Replies
View Related
Dec 13, 2012
]I have been experiencing a real problem with my computer. It started to Boot slower and slower about 2 months ago.First, the computer: A VM Win 7 w/ 1 CPU @ 2.4 GHz & 2 GB of 1067 MHz DDR3 RAM.
View 6 Replies
View Related
Mar 31, 2011
I have a new Dell Latitude E6510 I-5 that I have only had for about 4 weeks and it is booting up slow taking over a minute.Once the computer starts up it runs great.with what is slowing down the boot up[CODE]
View 7 Replies
View Related
Apr 18, 2012
like the title says.the hdd light is ALWAYS on.ALWAYS..even not a second OFF..and most of the time..boot pauses at motherboard name screen..and it makes the boot slow.
View 9 Replies
View Related
Jun 4, 2009
Ok so I have a brand new install of the RC
It is loaded on a I7 920 gigabyte x58 ud4p mb /12g ddr3 1600 ram /raid 5 set up with a rocketraid 2640x4 /4 wd 32m cache 640gb hard drives and It takes forever to boot from power button till log in screen 2.5 min approx
View 6 Replies
View Related
Mar 30, 2012
Slow Boot Times with a SSD?
View 4 Replies
View Related
