When using a program on my PC, I get a .net framework error and the program does not shut down correctly. I'm wondering if this is linked to my .net update problems.For a good while now, windows update has failed to install 2 security updates for .net framework (KB2604121 and KB2656405) as well as one update for .net framework (KB2600217). Each time I receive a error code 643 from windows update.I have also tried to manually repair my .net framework by going to .NET Downloads, Developer Resources & Case Studies | Microsoft .NET Framework and downloading then installing. Each time, halfway through the installation, my PC will shut off immediately and restart without warning.I figure the .net framework error I get from the program I use is linked to this update problem.
I always seem to get that dreaded BSOD warning a lot of times after I hibernate. The night before I'll set my computer into hibernation. I'll wake up the next morning, press the power button on the computer, and receive the "windows did not shut down correctly" black screen error. The computer always starts up fine, but then I get the message:
Quote: Problem Event Name: BlueScreen OS Version: 6.1.7600.2.0.0.768.3 Locale ID: 1033
Additional information about the problem: BCCode: 9f BCP1: 0000000000000003 BCP2: FFFFFA8005BC9060 BCP3: FFFFF80000B9C4D8 BCP4: FFFFFA800BD27D10 OS Version: 6_1_7600 Service Pack: 0_0 Product: 768_1 I have a HP p6234f running Windows 7 64bit OS which was installed in this computer when I bought it two years ago.
Occasionally my Laptop (Windows 7, 3gb RAM, Compaq Presario CCQ61) doesn't boot up correctly. As in normally the problem is ''Windows cannot find an OS'' thats not the exact wording but somewhere along the lines, its a blue screen and there is also some other writing underneath. I tap the off button to turn off and then i turn on again, sometimes it boots up fine and works good but sometime like it says run system repair (reccomended) so you do and it go's through steps and tells you to do a system restore which I do then it does work...but then maybe a week later you will open the lid and it won't respond (the mouse won't move and you have to hold the power button the turn it off., its starting to get annoying at this stage, considering restoring to factory settings.
Windows doesn't display some shortcuts correctlyFor some applications I see: But in properties of the file i can see it's icon.How to fix this?p.s. I tried to delete IconCache.db and reboot,
I have a program (written by a community member for this game) that hooks into the game itself, and grabs the onscreen text. Now, the program itself works, but only when UAC is disabled. I can run it as administrator, and approve the changes it makes to the computer, however it still won't work unless the UAC is disabled.Do any of you guys know what the problem is? When UAC is off, the program does not need administrator priviledges. When the UAC's on, when the program starts up it the UAC makes its appearance and asks if you'd like to allow this program to make changes, and i always click "yes." So I don't understand why, even though i allow it to make changes, it still can't do those changes.My friend, the one who showed me it, runs XP and has no problem with it. if you want the link for it, if you need it, i can get you it. It's pretty simple really, just the program and a .DLL file that goes with it.
I just bought an HP7500A wide format so that I can print my 12 x 12 scrapbook pages at home. It prints borderless fine on cardstock but when I try to print on photo paper it stops about 1/4 inch from the outside edge and leaves a line of ink. I am using Red River glossy paper.
I have an issue with my computer and Window 7 that I was hoping you could provide insight on how to fix. Recently I have noticed that Windows 7 doesn't want to shut down. Heck, it doesn't even restart and Hibernate. When I go to Shut down the only option it provides is Log Off. You can shut down after the the computer Logs Off my account, but this wasn't the case before.
I also feel it might be important to note that the computer prevents me from entering the Task Manager and Ctrl- Alt- Del no longer does anything.Is this an issue with the OS or could this be something like a Virus.
I have windows 7 professional 64bit and it won't shut down by it's self - it will just restart. I had the RC version (64bit) earlier and that did the same too. I used to run vista (32bit) on the same machine/hardware and that was fine. Any ideas what might be up[CODE]
Just randomly, my computer hasn't been able to shut down the normal way. I'll go to start > shut down and it just sits on the "Shutting down" screen for a while and actually reboots and says Windows did not shut down correctly.
I'm writing about my friend's computer so I don't have all the info at my fingertips. It's about two years old. I know she has Windows 7 on it. She has been having trouble for a long time with the darned thing not wanting to shut down. I'm going to quote her description to me in an email and hope that someone has some ideas. I'm trying to help her out because she is not comfortable with going into forums and doing this. "It turns off some times right away. But then a few times it sits and waits to shut off. If I close the lid it only shuts down the screen but the computer is still running. Then later it turns back on as I hear the start up tone. Then I can click off again and it shuts down. If I don't turn it off then it shuts down after it use all the power."
I have a problem running Patran 2007 in Windows 7, the program seems to run fine, and I am able to open data bases and work on them. The problem comes in when I want to either save the database, open a new database or just open a current database. For each of these functions a new smaller window pops up so I can navigate to the correct file or path to click on it or whatever.
Initially the window opens as I would expect, but as soon as I move the mouse or try to use the keyboard to navigate, the window goes blank and I can do nothing with it. Strangely, using the compatibility setting to open the program in a 640x480 display, they do seem to work fine, but because of the small resolution, I cannot actually see the part of the window where the files are - so that also doesn't help me.
It seems as though there is something between Patran and Windows that one of them don't like, but it baffles me that everything else works fine. If any one else has had the same problem, maybe with a different program even, let me know what you did to resolve it. Otherwise any advise would be useful.
I would like a way to program my notebook computer to 'turn off' not 'shut down' when I press the power button, like a desktop computer would. In Windows 7, there does not appear to be that option available in the list of available options under 'Power options'.
1 x Antec Twelve Hundred V3 Black Steel ATX Full Tower Computer Case
2 x Asus VH242H Black 23.6" 5ms HDMI Full 1080P Widescreen LCD Monitor
1 x Corsair Vengeance 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model CMZ8GX3M2A1600C8
1 x GIGABYTE GV-R695D5-2GD-B Radeon HD 6950 2GB 256-bit GDDR5 PCI Express 2.1 x16 HDCP Ready CrossFireX Support Video Card with Eyefinity
1 x Microsoft Windows 7 Home Premium 64-bit 1-Pack for System Builders - OEM 2 x SAMSUNG Spinpoint F3 HD103SJ 1TB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive -Bare Drive
1 x COOLER MASTER Hyper 212 Plus RR-B10-212P-G1 "Heatpipe Direct Contact" Long Life Sleeve 120mm CPU Cooler Compatible Intel Core i5 & Intel Core i7
1 x CORSAIR Enthusiast Series CMPSU-650TX 650W ATX12V / EPS12V SLI Ready CrossFire Ready 80 PLUS Certified Active PFC Compatible with Core i7 Power Supply
1 x ASRock Fatal1ty P67 PROFESSIONAL (B3) LGA 1155 Intel P67 SATA 6Gb/s USB 3.0 ATX Intel Motherboard
When I click the "Shut Down" button within windows, the computer will restart and not shut down.
When I physically HOLD DOWN the "Shut Down" button on the computer case, the PC restarts.
I do not have any BSOD's. I do have a memory dump file that say's to be 470,628KB in size but I can't open it.
I have tried disabling my overclock and I have left my overclock on and it DOES NOT make a difference. When I press the "Shut Down" it restarts. When I hold the "Shut Down" button down on my case, it also only restarts.
I would like to add that my motherboard has "Shut Down" button as well and a "Restart" button on the Motherboard, when I hold the "Shut Down" button it also restarts.
I was starting to think about the small 30 Gauge wires that have the super small headers, you know the ones that go to the bottom right of the MOBO, I was thinking perhaps that I got those mixed up in different spots.
But that doesnt logically explain or solve the problem I have from shutting down from within windows, does it?
Is there a tweak possible to cause a program that doesn't have the ability built-in, to open multiple instances of itself to do so?I use Movie Collector for cataloging videos, and often when using it's scraper function, the options for a particular program's data download, is for each season of the program, which means that the program tree and thumbnail display fills rapidly, causing some orderly disorder.I prefer to integrate the seasons that I have of a series into a single listing, but to do that requires not only a lot of copy/pasting, but is hindered by the fact that one must go back and forth, opening and closing windows a lot. It would be much, much easier, if one could place two windows of the program side-by-side.
My itunes and safari icons have both changed to a completely unrecognisable icon. I cannot run either of this programs on my computer. I have tried reinstalling but this didnt work.
I have tried installing windows live essentials to use live mail, it says live mail is installed but it doesn't appear in the program list and i cant open it.
Essentially, upon starting up my computer, from time to time, I have no yet been able to isolate what may cause this issue, I will find that I cannot launch programs from their shortcuts in the Quick Start or Taskbar menu. As of right now I have not tried to launch said programs from the original .exe file in this scenario.I've noticed that when I try to open these programs from the Taskbar, the icon will be surrounded by a square to indicate that it is active, but, after a period of maybe 5 seconds or so, sometimes longer, it will disappear and the program will no longer look active. Opening up the task manager, the programs usually show up in the Processes under the appropriate name. Multiple instances of a program can appear, even when, under normal circumstances, multiple instances aren't allowed (such as with Firefox). The processes will usually show a static amount of memory used, like 108k for any firefox.exe in the process list, and will simply sit there until they are ended, despite the program not actually running. When this happens I generally have to restart the computer and hope it works on the restart.
In Windows 7 I cannot get shortcuts to open from my destop. I get the error message "The protocol "http" does not have a registered program". How do I fix this
I built a website using MS Publisher 2007. Im using Filezilla to upload changes to the site. Everything works great. Except: When I use a computer which runs on Vista, and I upload the changes, all the changes are good on IE, Firefox and Chrome.
However (and heres the very strange part), when I upload the changes on a computer running Windows 7, the changes are all good on Firefox and Chrome but on IE, the menu bar down the left side doesnt show up which, of course, means that anyone viewing the site on IE cant go to other pages. Ive tried to upload the changes using another computer running Windows 7 to be sure it wasnt just my computer and the same thing happened.
I recently built a new computer using the Asus P67 Sabertooth Motherboard.I am using a Crucial SSD drive as my boot drive. This is my problem.If the computer ever goes into sleep the monitor will not wake up when moving the mouse and the computer has to be hard shut down in order to get it to get the screen to come on. The computer sounds as though its waking up just no video at all.The second thing is every couple of weeks my computer will start to boot up and then after the Bios screens it will sit at a black screen with a blinking cursor.I will restart and go into the bios and select boot menu and select the Crucial C300 SSD and it will say its resuming windows. But it will never boot correctly again.I will always have to boot this way.I am wondering if the SSD is bad.
dvd will not function correctly, tired seven dvd player/writers all from working units. it telling me no disc then said checking disc. I have used writeables rewriteables then put them in a unit with xp on it works fine format try again works fine again. I have installed 7 on this machine and it will not work. all the other systems work. JUST will not write or read a DVD HELP!!!!
I just bought a new 3 TB hard drive and I'm trying to install it. So far so good (I figured out how to do it) but for some reason it only partitioned 2048.00 GB on the drive. 746.52GB is unallocated and I can't figure out how to add it?
I am running Windows Home Premium on a HP a1624n computer. I was trying to find a file the other day and what I did was sort a folder contents in My Documents by date modified to find the file. Great! I found the file I was looking for. The problem is, now the My Documents folder is not displayed correctly and I can't figure out how to fix it to display correctly. For example folder names in My Documents are:Word Docs, System Stuff, ## Outlook, My Scans, Temporary Copy Spot, Nexus One Related etc.These are displayed in that order. By my question, I want the folders displayed in order by name meaning the list above should be Left to Right:## Outlook Files, My Scans, Nexus One Related, Temporary Copy Spot, Word Docs etc. If I select : Arrange by Name, I see a list of all files inside of all the folders. If I select Arrange by Folders, I see the list folders in the incorrect order I have listed above. If I select any other option, I am presented with file lists of all files in all the folders in My Documents.How do I get this fixed to display correctly? I haven't tried a system restore as these files are personal files and System Restore doesn't touch them. Daviddude has chosen the best answer to his/her question.Click here to view the answer that was selected.
It seems all my applications are acting up so I have to use a separate computer. I know its not a virus since I never accessed the internet but all my applications went hay-wire, if I double click for example: notepad, it tries to open up internet explorer then shuts that down and asks me to run or save the file application, either choice I make causes the screen requesting those two options to reappear over and over. It all started when I made my falloutnewvegas.exe try to open with the falloutnewvegaslauncher which was the only one allowing the game to launch. so after that every application has a internet explorer icon in the middle of it with a blank page.
So when I came back from class today, my computer was off and so I turned it on. It never got passed what seems to be the BIOS screen (I don't actually know what it is, but that's what I think it is).
I have a Predator G Series G5900, with no modifications. Attached is the photo of the screen I have when I turn on the computer.
What I have tried:
- Unplug every USB device and take off the power supply. Hold the power button for 30 seconds. Reboot.
Certain websites such as eBay, Facebook & Hotmail are not loading correctly. Once I hit log in the page just shows as text to the left hand side of the screen. I have cleared all history, cookies & cache, I have restarted my computer, I have tried accessing them under a different windows PC user name, upgraded Mozilla, tried internet explorer, upgraded Java and made sure it was enabled.
For a desktop theme the i saved a theme right? then i got a new background and the first one was saved, but i save the second one and every background i choose it makes a "default" background and it overrights the second save. How are you suppose to save a theme without it being overwritten?
My display has suddenly decided to reduce it's size and doesn't any longer stretch to fill the monitor screen. There is a black border of about 1.5cm all round the desktop display. Using Windows 7 on a Dell All-inOne.
am having a problem with many of my programs. For example, my minesweeper does not save my game anymore, my curse client does not open saying it is a logging system error, my google chrome does not save my history and the extensions i have on it do not save any of my history as well, my windows desktop gadgets do not update anymore (my weather is not updating and says it cannot connect to the internet), and my taskbar does not recognize my cursor leaving it so it keeps whatever icon i had my cursor on last highlighted. The last thing I remember installing before all the errors occurred is minecraft and a minecraft server
Just set up a homegroup using 2 pcs running Windows 7 Ultimate (Build 7600), both pcs can see each other and connect to view the librariesthis is where the problem ariseswhen i try to open a library on the remote pc, it wont open it even though there are files in that area on the pc i am trying to access. it is exactly the same if i switch pcs and try to access the 1st one.
For some odd reason, about a month ago all gadgets in my win 7 ultimate stopped working correctly and now look like this when extended:Not even samples for the clock are displayed correctly anymore, instead I just get this red X-es.I've tried many things already, such as repairing windows for the dvd and so on but none have worked.
