Since a week, my Network (LAN) adapter on my HP Compaq 6730b Windows 7 64bit, einstalls itselves.I have no idea why this happens. Have installed the newest driver from hp.com (Broadcom Wireless LAN Driver for Microsoft Windows 7 ) but there's no change.(i've installed it, and a few minutes later it deinstalles itselves again -.-)There's only a message: "The network adapter was successfully removed."Updates from windows 7 are also done everytime there's one.I'm in the internet now with my WLAN-Adapter...but the speed is not that high if you know what i mean
My grandson is getting ready to enter his senior year of high school. They have been given the Aspire 3830-T TimelineX with Windows 7 Professional installed on it.
He is not supposed to download any programs on this notebook, but he did. So, he went into the control panel and uninstalled some things. Included in this was something called Babylon and also his Atheros wifi adapter. He has tried system restore and it will not work at all.
I went to look at the system recovery and it doesn't go back to the date he did this, nor before. So, I don't know how to reinstall this for him and get him back onto wireless.
I disabled my network adapter then restarted and now the adapter is no longer showing up in my network connections. How in the world do I get it back? I have looked at other options (like under the registry which was suggested on a couple of places). I have never seen this happen before. I even reinstalled my drivers and still nothing. How do I enable it again?
I have a linksys usb600n (v2) using the Windows 7 driver from linksys. It installs and is displayed correctly in Device Manger - BUT it doesn't appear in the Network and Sharing Center as an adapter. This same device and driver were previously working just fine in this system - but I rebuilt the OS (clean install) after testing a number of security products out.
The initial install went fine - no problems that I remember - just plug in the adapter and install the drivers obtained from Linksys (Ver 3.00.01.0). I tried the same thing on the re-build and it looks fine until I go into the Network Center and can't set up wireless networking since the adapter does not appear.
SIW shows TWO (2) linksys USB adapters under Hardware/Network Adapters, but does not show the network adapters in the Network Information section.
Installed Windows 7 on two home-network computers. Everything appeared to be good, including networking, but I could not access printers (linked through each computer) with the opposite computer. Windows update offered an update for the Broadcom 802.11n network adapter, but when I installed the update I completely lost the network.
I had to revert to the old driver in order to reastablish the network. But the printers still are not recognized. The network adapter on the secondary computer is a Linksys WMP300N. I did try turning the router off for ten seconds with the updated driver but that had no effect.
Whenever I turn network discovery on and click save changes, I go right back to edit advanced sharing settings to find that it has set itself back to off automatically.
i have windows 7 ultimate, although i have the connect automatically checked evry time i reboot i have to put the network key in. dongle is a billion and router bthomehub2, any help appreciated drives me mad trying to remember network key all the time.
I have Windows 7 Ultimate. I always have ran Malwarebytes Daily and RegCure.I had a trojan make it past Malwarebytes so I decided to give Avast a try. Didnt like Avast so I uninstalled it and went back with Malwarebytes. Malwarebytes didnt get it out, so I have Hitman Pro when I need it. Got the 2012 Trojan out. Now when windows loads it fails to load my Proxy Settings. Then I run the troubleshooter and it tells me this: Windows could not automatically detect this network's proxy settings So I tried all the netsh resets and it didnt help. Tried winsock. Nothing helped. Went into DevManager and nothing is grayed and no exclamations.I uninstalled the drivers for the net card and wifi card and restarted to let them reinstall. Nothing still. I opened Network Connections, NOTHING shows up. I also overwrote the Sys32 file nlasvc.dll and nothing happened.
I'd like to optimise windows such that it doesn't look for networks when I start up. I'd like to choose myself when to be signed in to network and when not to, just like I can open a program and then close it. At the moment if I disconnect my wifi connection it looks for a new automatically, and finds the very same and logs in to that one again.
I just got a new computer with Windows 7. My old one was using XP and I had a Linksys USB adapter for it, but it's not working on 7, and I guess it probably shouldn't. So I'll need a new one to connect to my router wirelessly, right?
My VPN does not work any more and kept getting the message that "Failed to connect for following reason :activating VPN adapter failed ". This happned after my system got hit by the Trojan "Win 7 Antispyware 2012 " and malware was run to remove it .
im running windows 7 on my toshiba sattelite L15 S104 and and i cant find a driver for my T60N871 802.11 b/g WLAN wirless adapter. its made by intel but it says foxconn with it also. ive tried toshiba.com and intel.com and still cant find it. does anyone know where i can because i really dont want to go buy a new wirless net work adapter.
I upgraded my windows 7 beta last night to the RC1 release. The only issue i am having is that now my wireless driver is not working correctly.
under the device manager the error is "Windows cannot initialize the device driver for this hardware. (Code 37)"
I am using a macbook pro with bootcamp on it, the initial beta public release of Windows 7 picked up the drivers fine. For some reason after upgrading i can get no wireless though. I have tried downloading vista drivers, and just about everything i can think of. I also downloaded the Bootcamp Vista 32 Update from mac, but it did not resolve the problem either.
I loaded some software that I didn't want to 'activate online' and to insure that there wasn't any internet connection I manually disconnected the cable from the port. I plugged it back in and I'm reconnected, until, I reboot.
Once the computer has rebooted I'm no longer connected. I either have to do one of two things, one disable/enable from the device manager or two uninstall and reboot till Windows 7 finds it and re-connects.
Any time after that if I reboot I never get internet connection. If I try to load the drivers I get a compatibility error/issue and if I do a driver update from the device manager it says I have the current/latest drivers.
Edit: I'm getting the yellow exclamation, to be more specific.
Running Win 7 Ultimate 64 bit. I have an HP desktop with a Realtek PCIe GBE Family Controller. All was working fine until I got the automatic Win 7 critical update issued 2/15/2011. That is the only thing I can think of that changed. Now for the problem.When my PC boots it appears that the NIC driver is not being started giving me no access to my Netgear WNDR3700 router and thus no internet connection. If I uninstall the Realtek Controller using device manager then restart the system it finds a new device, the Realtek controller, and installs it and I can then access router and the internet. When I shut it off the next time I start it up again I have no access to the router.I did restore my system back to 2/14/2011 using the restore point created by the 2/15/2011 update and it worked fine until Windows automatically installed the critical update again. That is why I blame the update. Since then there have been two or three more critical updates but the problem persists. Also I can no longer go back to the 2/14/2011 restore as it seems the system only retains the latest restore points and 2/14/2011 is gone.One other thing is there is another listing under Network Adapters in Device Manager. WAN Miniport (PPPOE) it has the little triangle with the exclamation point in it. I tried to reinstall it searching both my hard drive and the internet for a driver but it can't find one. Under Properties it also says, "Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52)" However this does not stop me from accessing my router using the method described above.
i have a windows 7 laptop and i need to install a network adapter so i can get online... i got a 2nd laptop so its good but WHERE can i get the driver so i can put it on a usb and install to the other laptop?
I bought a new laptop and I can't connect to the internet because it says "Windows could not find a driver for your network adapter."
I can try to manually download one but I don't know what network adapter I have. When I bought the laptop the only information it gave me was that is has an HM65 Express Mobile Intel chipset based motherboard. No word about what kind of network adapter.
what the network adapter driver is called for my z77 extreme6. I'm using a usb drive to transfer drivers from another computer. No. I don't have my disk that came with the motherboard.
I've recently came on my desktop and i realized that the internet connection was off it had a red XBut it was working fine before? im not sure what happened. Anyways i cannot seem to find the driver to download it nor do i know what it is.Amd Athlon ii x2 245 processor 2.9ghz4.00 gb64 bitati radeon 4200insiprion 570dell
ok i have a windows 7 laptop and i need to install a network adapter so i can get online... i got a 2nd laptop so its good but WHERE can i get the driver so i can put it on a usb and instsall to the other laptop
I have recently run a virus scanner from mcaffee stinger. I had several virusus and it removed them. Although there gone I had just booted my laptop and it wont let me connect to the internet. It said limited access on the icon. I troubleshooted the windows network diagnostics and it said this. Problem found windows could not automatically detect this networks proxy settings. Whatever I try to run as administrator it will come up with an error saying
C:/Windows/system32/cmd.exe <-that was an example the name changes for different items.
I basically cant use it at all now. I go to the control panel and click right click properties to disable and it will come up with the same error. It also said windows has encountered an error saving the wireless profile specific error: the data is invalid.
I have two network adpatro in win 7 one is lan card network adpator that use ip 10.1.4.100/16 Gw 10.1.1.249 one is VPN network adpator .If it enable , the IP will ber 192.168.2.X /24 .
I want to make bridge and so , the computer from 10.1.4.XXX /16 can use my computer to reach the 19.1.68.2.x . In this case , my PC work as a router .
I try to make bridge with above two adaptor . But after enable the bridge, I still cannot ping ,telnet 192.168.2.XXX from 10.1.4.xxx PC even after setup the route table .
I just installed Windows 7 Ent. (64) and can not connect to the internet due to the fact te system can not find a driver for my network adapter.I ran the DEVMGMT and it shows no network adapters BUt it shows two yellow.
I'm having a problem with staying connected to my network with my Windows 7 PC. I have several other machines running XP and a laptop with Vista none of which are experiancing the problem.Basically what happens is the network adapter drops the connection whenever there's a high amount of throughput. Streaming media, transfering files, gaming, download all do it. Browsing is totally stable but as soon as I try to download a few things or move some stuff around the network it disconnects.It's a Linksys AG241v2 with the Pheonix Firmware and an Asus Crosshair in the PC. I've tried sifting through the forums but none of the solutions have worked so far.
I have a AR9285 Wireless Network Adapter installed in my Asus Eee PC. Whenever I wake up the computer from hibernate or sleep, the wireless adapter takes a full minute or more before it will actually connect to a network. Once it is awake and connected, I have no issues, and I have no problems connecting to different networks. So it is working as intended most of the time. When starting up the computer from "off," it is usually fine as well, since the amount of time it takes to fully start up the computer is usually about enough time for the adapter to get going (though not always).I cannot ever "quickly" look something up on the computer, as I have to wait a few minutes in order to be connected to the internet. Has anyone had or heard of this problem? I checked and the driver is up to date.
A few months later i wanted to upgrade my 32 bit to 64, since i could only use 3,16 GB ram, and my computer has 8GB. So i bought a win 7 home premium 64 bit and installed it. Now i face the same problem, my computer can not detect any wireless network adapter, though i'm 99% sure that my computer has one.
since build 7068 I've been facing this problem with this network adapter, will try to explain as good as I can.
Problem as following: Everytime I start the pc after one or two minutes I lost my internet connection and when I try to restart the pc it hangs when shutting pc is showed, forcing me to shut it down only whit the power button.
I have tried to install the vista x64 driver that I have for this network adapter but cannot installed since is onlyfor vista x64, neither in compatibilty mode. After a few research managed to installed it via safe mode. and by now is working good but device manager shows a warning icon and a Cannot start device code 10.
any knows is theres a win 7 update driver?? can I just keep ignoring the code 10 till this bug is fixed??
