after boot up I click on anything above the taskbar and the icon opens then freezes, ie: control panel opens then I cannot open anything in it, the window outline turns grey? I do ctl,alt del for task master then I can click on control panel and it will open? ie: click on computer icon and I cannot open C drive, nothing happens until I open task manager?I did a full repair.when I click on the taskbar after a boot, nothing happens, nothing highlights or attempts to open. I am using a wiresless microsoft mouse. I aslo tried a usb mouse.
This issue is bugging me for some time.Does anyone know how to stop mouse keys from starting on their own on startup?This happens since I first used them on this pc.I did try turning them off before logging off,but it didn't work.It's not something serious,but the icon confuses me.
Is there a way to start a screen saver with a hot-key or a mouse gesture (or perhaps by putting the mouse into a certain corner for a certain amount of seconds)?
I would like the ability to start the screen saver on command without going to the display option and clicking the preview button. For example, when surfing the web or watching a video, I would like to push alt-s or something similar, or perhaps move the mouse to a corner, and the screen saver starts automatically, right away, then acts normally as if it started by itself (meaning, it is "on" until I move the mouse or push a key).
My mouse takes a full minute to be usable after boot. the first time this happened I did a system restore and it fixed it. It came back, I did another restore, it came back again I did it 3 more times like this. I am current on all updates. I am running a asus px658d-e board. All the drivers are up to date. I am running the most recent bios, I am using a usb keyboard and mouse. I have tried booting with the mouse in each usb port with no improvement. I deleted the mouse in the device manager and rebooted. it reinstalled the driver and the problem did not improve. I am running win 7 pro 64bit.
I've been getting this problem lately where both my mouse and my keyboard start acting up after a few hours of the computer being turned on. What happens is that the keyboard stops using it's normal functions (ie. pressing m to type m) and starts doing a number of different things instead, ranging from not work at all to opening programs and closing them down by pressing F keys and pressing unique characters such as umlauted letters. The mouse also acts up, trying to run programs in administrator when they are pressed on the windows bar at the bottom.The computer is pretty brand new (a month old) and I've been using a new mouse and keyboard since buying it also. I've tried unplugging and resetting the keyboard when this happens but the only thing that seems to reset the issue is restarting my computer which fixes the problem.
My computer qwill freeze for a few seconds followed by system lag which seems to get worse (freezing every few seconds/taking 2 seconds to recognise a click etc.). If i reset my computer it resolves the issue but i was hoping you guys may be able to give me more insight as to what the issue may be.It nearly always happens when i am browsing in firefox. Have never had it happen to me during gaming etc. which is why i'm hesitant to believe it is to do with my GPU or it's drivers which are always kept up to date.i have included pics of the cursor and what processes were running at the time of the freeze/lag
Lately I have been having an annoying problem with my wireless mouse. For some reason the pointer will lag, and be very sluggish and jumpy. I've had this mouse on this computer for about a year and I've had no problem. Out of nowhere this problem is happening. I've tried re installing drivers with no luck. I tried uninstalling intellipoint and re-installing it, but when I tried I got the BSOD, and then it completely disabled my mouse and keyboard so I had to use wired peripherals to go in to safe mode and do a system restore. Now everything is working again, except my mouse is still jumpy.
i'm trying to order something from a website and the cursor want open my cart for me to look at it and finish my order. this is happening in several sites not just one.
Is it possible to turn the mouse acceleration on only when using the touchpad on my laptop and off when I'm using the mouse? I usually don't use the touchpad when the mouse is plugged in if that's an
I probably spilled some coffee on the keyboard and now I can not inactivate the mouse pad in favor of the external mouse. The only way I can eliminate the conflict is to uninstall the mouse pad. That works fine but every time I reboot for something I have to uninstall it again. As you know rebooting is common and therefore I have to reboot twice for every time I have to reboot. Anyone with a solution to this problem? This is a HP laptop. The mouse automatically installs everytime I have to reboot. I do not shut down normaly.
I have a W7 64b laptop.My mouse has started having problems, first it didn't click on things when i pressed it but if you persist it does no no big harm there. Biggest problem I am facing is the mistaking of the wheel with mouse 1. Some times when I am browsing the net and i have to scroll, and generally every time I move my mouse fast, it automatically presses the wheel. It is getting really annoying and I dont know how to stop it. I changed the mouse with another,and I had the same problem.I dont know what to do.I believe its a virus but pc didnt find anything with avast.
I'd like to have 2 mouse pointers locked inside 2 different windows and also have my keyboard inputs being active on both windows at the same time.Imagine 2 notepads open with the size of half screen each, and have 2 mouse pointers controlled at same time by the same mouse for each of the windows and typing in both notepads at the same time.whats the program called?
I have a TT esports theron its a nice mouse but for some reason it no longer reads it as such. Whenever i plug it in it reads it as HID-compliant mouse. Which doesnt allow me to use the program and set the extra button commands. How can i go about fixing this?
I used my Turtle Beach Headset while playing a game and since then the computer has started saying i have two mice connected to my computer. The problem is that since its reading two mice the one i have been using forever has stopped working right.ouble Click is disabled and it moves extremely fast. I go to disable the HID Mouse and everything is working fine again. But when the computer restarts it seems to reinitalize the HID Mouse. So i uninstalled the driver for it. Next reboot it was back again and this time the headset wasnt even plugged in. I am not getting any error messages in my device manager but i cant seem to get the HID mouse to disappear. Whenever i plug anything into the USB port even if its a Thumb drive the mouse comes back.
So ive been getting the black screen with movable cursor lately and have tried many a methods to remove it i tried checking in my event log for something, and this is waht it said "The following boot-start or system-start driver(s) failed to load:dtsoftbus01" So what does this mean and how can i fix this?
Monday couldn't boot up PC, had to go to system recovery and restore to previous day.
Log files show below that 4 things failed to load. Tuesday couldn't boot up PC again.. tried to restart like 4-5 times.. Finally comes up and in the logs there's numerous things that failed to load. Running a sfc /scannow right now.
I found corrupted system files, but it appears that the hard disk is fine. executed chkdsk and no bad sectors.Just looked into this on event viewer-The following boot-start or system-start driver(s) failed to load:xsoaynmfmfxpefxbozedltnzvijcvI am running Acer Aspire X3950-U3022 with Windows 7 Home Premium Home Edition.
I'm not sure where to even begin to fix these problems. Some online searches suggested doing a system repair but I want to get some more feedback here before proceeding.Here is the message from the event log:The following boot-start or system-start driver(s) failed to load:
AFD cmdGuard cmdHlp CSC DfsC discache ElbyCDIO
[code]...
I realized some of these are not Windows 7 related but most are. While the computer "works", I do experience frequent reboots and freezes. Perhaps some of these driver loading failures are part of the cause of my issues.
When i got home today didn't my computer work, my girlfriend has been the last one using it. So don't know how things were just before the shutdown or anything.when i turn on the computer i get to the screen where "touch bios" is and where i can see the options like Bios settings, boot menu, xpress recovery.but i cant press anything, and after about two seconds on that screen the PC shuts down again.The keyword lights up so there is a responds on it, but just doesn't work to press anything before it shuts down.I've got BSOD upto several times a day for a few months time.believe that my computer is affected by some virus or something is delaying my computer. might be an combination of several things.I got no external things hugged up to the stationeer computer right now.it is a windows 7 x64 machine. usually when i get issues i can access advanced boot up or bios, but can neither in this case..I wonder if it might be a hardware issue.
When I start up my computer, my Steam starts up, then I manually start Chrome. Chrome comes up fine, Steam does too, but when I try to right click on Steam and click friends, all it does is create another steam process running at 100-108 K. Then if I close Chrome and try to reopen it, it will do the same. This happens with EVERY program after I start up. There's a 5 second window where I can open programs without issue, then after that it will only start 108 K copies of them. It takes me around 30 restarts just to get it working properly, if not more.
I have a video card that used to boot up in windows 7 - but know this computer with a GeForce 9500GT video card boots up with the Vista boot up logo.I found out this was the video card because I have another card with another GeForce video.I took the swapped the video cards, and the indication changed. The original computer booted with the windows start up screen. And the test computer booted up with the vista boot up screen.
I was told by a local computer repair facility this had something to do with video drivers.I tried what the organization suggested and uninstalled all video drivers (I used generic Windows 7 Video Drivers).Then the organization recommended downloading the latest video drivers for the GeForce 9500GT.This video card has 512GBytes of memory. I did this.Then I was told to install the newly downloaded video drivers.I resrted the computer with the Vista login screen with windows 7 operating system,and the vista login screen was displayed.
Last night I was on my computer and then I shut it down. Today when I came home from work it keeps saying windows failed to start. I tried hitting f8 and loading to the last good configuration doesn't work, safe mode same thing, repairing nothing, so my last resort was my windows 7 cd. So I went into bios and made my configuration boot from cd/dvd popped it in and restarted, a black screen came up saying windows is loading files, then the windows 7 menu came up, picked my language, next, and first I tried repair my computer, I get the little circle meaning its loading for like 5 seconds them it does nothing, rebooted again but this time I chose, install and I've been on the setup is starting for like 20 min. And forgot to mention, when it boots seem like it does good then comes to the screen where it says windows failed and gives me two options repair our start normal, if I pick repair it just reboots and start normal takes me to like the pick your user screen but its just blank no users, so I can't even restore our access the computer.
1. Which DLL uses W7/64 for the sound at start-up of Windows? I would like to edit it for my own sound.
2. How can I alter the sequence of the entries in the Start-menu? Now the sequence is in sequence of creation, I would like to group them by application-area.
I have an error that system32/hall.DLL is missing so I put in my windows 7 DVD ( I Have 4 DVDs for my windows, gateway, I always put the first one) so I could start start-up repair but when the windows files is loaded it keeps starting recovery mangment which gives me options to recover my hard drive to factory defaults (ie delete files on c and reinstall windows) ,why I don't get options to choose startup repair, how can I get it to start start-up repair?
My laptop freezes when i turn it on after a minute or two just enough time to maybe sign in but i can go into safe mode and it wont freeze but you cant do anything in safe mode that
My dell n5030 laptop isnt getting past the windows start up screen. It boots up fine up to the part where the four balls become the windows logo, but then freezes there everytime. When i try to select the windows start up repair it blacks out the screen and I cant do anything.
I know its not a faulty hard drive because its newly fitted and this problem occured previously on a different hard drive aswell.
using windows 7, have a blue screen at start up issue, memory dump. Sadly the PC wont start so unable to try too much, it lets you select user, attempts to ,log onto the user then just goes to mthe blue screen and starts the cycle again. It will not start in safe mode either, basically the same result although sometimes it loads and you are in but when you try to do anything it goes to the blue screen again. I did get the error code (not always the same on the blue screen but this one comes up most time), "driver IRQL not less or equal"
