OK so on to my problem and question. I set my taskbar to be along the top of my monitor screen. It seems like ever since WinXP and probably before that, some windows that open creep under the taskbar. So when this happens, I have to move my taskbar in order to close the window. Yeah I know there's other ways to close this window without moving the taskbar, but another more elegant way to avoid this problem is make the taskbar solid so the window can't creep under the it
Can I make my taskbar of Windows 7 so that it is transparent and I can see my desktop into it? I found a program Chameleon Window Manager, is that good? How must I set it up then?
By default the icons for programs I'm using in the taskbar (firefox, fl studio, etc.) are on the left, right next to the start menu button. How can I make them on the right, next to the notification area icons?
how I could make the icons on the taskbar bigger.. the only option under 'right click' -> 'properties' is to make them smaller.. the other option under "Control Panel -> Appearance and Personalization -> Display" makes everything big..
Like if I have a few windows of my browser open and minimize it, it will go into one and I have to click it, then the one I want. But this annoys me. Can I change it?
So i just finished doing my mac theme for my Windows 7 x64 pc. So I put my rocketdock on the bottom of my screen and set my taskbar to minimize but now whenever i go down to my rocketdock taskbar the default one pops up with it! So how do i keep it from un minimizing?
Every icon on my taskbar only open off screen. I can see they are open by the thumbnail picture, but I can't make it my active window. I have tried the alt-tab, move method but still can't get them to appear. Is the problem caused because my computer thinks there are two monitors, when I actually have only one? How do I stop this from happening?
I saw if some folks screen shots, that there must be a way to cause the open programs on the task bar to display wide.. Referring to sergio's theme, and a few others. I have dug into the taskbar options, but not struck gold, anyone know how this can be done?
I added my user folder as a toolbar to the taskbar for quick access to its subfolders and files. I had set some of rarely-used system folders in my user folder (such as "Desktop," "Searches" etc.) as hidden, and selected "Do not show hidden folders, etc." in Folder Options. These hidden folders are not shown in Windows explorer's window, but they show up on the taskbar's toolbar. Is there a way to keep them hidden on the taskbar as well?
Just reinstalled Windows 7 64bit on my new Crucial m4 SSD. However..I have my taskbar set to never combine so that there's no icons.
My previous install of Windows 7, I found a registry hack where I can make the "Tabs" on the taskbar wider. Can anyone point me in the right direction? I found a million threads on how to make the icons bigger and the auto preview bigger.
What I'm looking for:
Example:I want my taskbar to show
|Windows 7 Forums - Post New Thread - Mozilla Firefox|
I have Windows 7 N Ultimate. I just bought Paragon Migrate. I tried to move os only to SSD. Although it has option of selecting other stuff to move, when i choose something, it doesn't get chosen and program just not choosing anything but OS. But this is not an issue. The issue is, when it gets to DOS after restart to finish moving os, at some point while it is moving, I get error message "Some Error occurred: Bad parameter of function". At the same time, at the top right corner it says Succeeded. When I try to boot from SSD I get strange error window saying "Windows failed to start 0xC0000034 Unexpected error.
This isn't recommended, I know. But would it serve any purpose at all? As far as I understand the matter, aside from the wear and tear issue, whether an SDD is 0% fragmented or 100% fragmented makes no difference to the performance, due to the way the information is read from the disc. Is that so?I run MS Flight Simulator from an SDD (my O/S is on another SDD too) and I am starting to get some performance issues. Some have recommended I defrag the disc - when I analyse it, it shows 100% fragmentation, but if what I wrote above is true, it wouldn't make any difference. Right??
I'm looking to install a SSD drive for my windows 7 64bit custom rig I have. Currently I have everything on a 2tb internal HDD. I'm looking to keep everything the way it is and just place my windows on the new SSD.My first thought was unplug my HDD, install SSD install fresh Windows 7 on it, change boot up in bios to SSD first, plug HDD back in and delet windows off of it. Another thought was is it possible to install new SSD and move windows folders to it from HDD?My ultimate goal is to not have to reinstall all of my programs and to keep all my current settings.... I'm looking for the most painless and easiest set up of my new SSD drive and to just have windows on it.
I recently was doing 'maintenance' on my network and during the process, decided to upgrade the firmware on my routers/APs. All went well except that my trusty old BEFSR41 didn't survive. I tried the known fixes, but no response.So, I'm asking for recommendations. I do have wireless covered with a WAP54G, but it may be time to update that as well.Features I want are good security (inbound and outbound MAC filtering, IP Range limiting, port limiting, etc.), speed and reliability. I'm not opposed to a wireless router with ethernet ports (at least 4), but I would like the ability to turn the wireless aspect off, since I don't use it that much (at the moment).I have several machines on site, connected to an 8 port gigabit switch, which was connected to the BEFSR41, which was connected to a cable modem. Netgear is not a preferred solution. At some point, I plan to connect my TV, if that is a consideration in choice. OK, I'm rambling now.
I'm thinking of using a ssd for my windows 7 build early next year. I was just wondering what everyone's thoughts are on them. Ocz do some good value drives but I've heard their write speeds are painfully slow
After clearing my computer of spyware yesterday, all of my file folders are a pale yellow color? Why is this? Is there any way to change them back to their normal yellow shade? Also, I can only set my backgroung as solid colors, but not images.
I recently bought a SSD (Solid State Drive) it is a Samsung 64GB. My computer is an Asus with an i5 Processor.
Anyway I know the SSD works fine because currently I have Ubuntu downloaded on it, running just fine. For some reason however, Windows 7 is not detecting my drive. Under my computer, or upon booting from a disk, it will not detect it. The reason I am wanting to detect it, is because I would like to backup windows 7 onto my SSD and boot from there.
Yesterday I did a load of windows updates.. Service pack was apart of it. After all was done I rebooted and found my pc was freezing solid. I then did a system restore and still had freezing. I removed my AVG for now. So far no freeze but I have not been running long enough to really know... but what is happening is when it's in sleep mode the hard drive revs up about every 4 minutes. the computer remains sleeping but does this 3 second rev? My next thought was to do the windows updates again?
When I try and change the background to an image it just stays as the solid color, I use to be able to change the background but I accidently set it as a solid color and I can't change it.I've tried Ease of access method.
My desktop background became solid black colors and can only select from solid colors.Even if I select image it still shows solid color and thumbnail of image inWindows 7/personalization does not work. (look at image 1 below)another problem all folder, video and image thumbnails dont work (look at image 2 belowand some of folder sometimes shows black square on it (look at image 3 below)All these happened after taking word document from usb my flash drie.Because those word documents are distorted in another computerand theirextension was .scr and i assume this may cause all these.but I use Eset Smart Security 5 and no warning and after I scanned pc insafe mode with Kaspersky 2012 and they found nothing.I tried Malwarebytes and Spybot - Search & Destroy.I also tried Combofix 4-5 times and it deleted some file but
I'm looking to buy a AMD Radeon 6950, 6970 that's 10.4 inches in length or lower.I recently purchased a Sapphire Radeon HD 6950 Dirt3 addition to replace my Crossfire setup of HIS Radeon HD 5770 cards.The card ran great for a day, and then I noticed artifact tearing and constant crashing to blue screen was an immediate sign the card was bad. But I gave it the benefit of the doubt, went to safe mode, disabled the card, uninstalled the old AMd drivers, swiped the registry for AMD video clean and reinstalled drivers. Still same artifacts and crashing. So I turned off PC, reseated the card, and still same issues.I had to RMA the card, and unfortunately Newegg doesn't have it in stock anymore (I figured these cards were good because they're out of STOCK everywhere.) so it's likely by the time it;'s finished processing I'll get my refund. Because if the item is out of stocked I have two options, replaced with a product of "equal" value, or refund. I'll obviously opt for a refund though.
Windows 7 pro 64 bit AMD Phenom II X4 925 @ 2.8ghz 4GB DDR3 Dual-Channel 1600mhz Gigabyte GA-MA785GT-UD3H Mobo AM3 soc HIS Radeon 5770 Crossfire setup Thermaltake Toughpower Grand 1200w 80+ gold certified
I'm looking for software that can do one of two things. It can either take a directory full of photos and videos and play them in a slideshow type loop, or can combine photos and video in a single file, movie, .exe, etc for playback on a computer connected to a TV for a trade show. I'd also prefer free, if possible.
We have a week long trade show coming up, and would like to put new photos and videos in a directory each night, and have the software start to play all of the content, like a slideshow, in a continuous loop. Then, each night, we could stop the software, update the content, then restart it...or replace the single movie file or exe with an updated one.
I was using Eraser and it seemed to work just fine on my laptop but there seem to be issues using it on my gaming PC. I built the PC from scratch (honestly, I'm still amazed every single time it boots up successfully) and went for Solid State Memory, as it's a gaming PC. I don't know if it's that, or some other issue, but the erase all unused disk space option in Eraser won't function. I can target and erase individual files, but I want to use the function that shreds the whole of the unused disk (although it's obviously not a disk). Titanomachy ps. the paperclip icon for attaching files is disabled, for some reason, which is why no dxdiag.
I am going to build a system (actually many of them) I would like to have two drives in this system. one a very fast reasonably large (100 gig) plus VERY fast solid state hard drive and the other a very fast and very large (10 or 2 Teri) mechanical drive. My question is how do I setup the prefetch or cache or whatever to run the operating system and my recent history of programs off of the solid state and have the mechanical drive there with everything on it in case I choose to something new into the recent history list by running some program once. also have oldest bumped off solid state, when space becomes an issue, but still keep it on mechanical hard drive. I think that this system will appear to run faster except the first time you run a program. I think this would be useful for instance on a system that plays the same online game everyday. Or works with the same complicated drawing in auto-cad for weeks. I have my own ideas about how to do this, but I thought I might throw this out there to what it sounds like when it hits the wall.
Whenever I try to change my desktop background image to "Desktop Harmony", the default Windows 7 background, no error message comes up but it stays the solid color. But when I change solid color to solid color, the result is different. The background changes.
BTW, I recently reinstalled Windows, I think I fixed my driver problem because I restored Windows.old, but I can't seem to get rid of all the errors such as this one.
edit: I tried to delete TranscodedWallpaper.jpg from %USERPROFILE%AppDataRoamingMicrosoftWindowsThemes
but, Windows keeps making the jpg file AGAIN and AGAIN...
I've been using computers since Win 3.0, but have recently built my own computer for the first time. Generally, everything works great right up until the point it doesn't.Sometimes my PC will randomly just "lock up". The screen freezes, the keyboard is completely unresponsive (including ctrl-alt-del), the mouse cursor is the spinning circle. The only way out is to hit the RESET button.It seems fairly random, and has happened while I was using iTunes, Outlook, or other programs.The one constant is that every time it happens, I can see that the HDD activity light is *solid*. It's not flickering / blinking like with normal HDD access, just solid. I don't know whether there is something truly being accessed, or whether the solid light is just a red herring.
Also, I don't know if the system is actually frozen, or whether there's something hogging the system to the extent it's so slow that it appears frozen. It's a pretty beefy system, so whatever it is would have to be really doing a number. I've only ever waited like 2 minutes before giving up.Given that every time it happens the HDD light goes solid, I have to suspect it's something with the hard drive subsystem, but I don't know how to begin troubleshooting whether it's a mobo SATA port issue, an Intel RST driver issue, a hard drive issue, a cable issue, or maybe it's not the hard drive at all!Here's some details (see more in my Systems Spec)Recently purchased DZ68BC mobo Prior to Windows 7 installed, verified mobo BIOS default was AHCI Installed Windows 7 64-bit Home Premium Win 7 appears to use AHCI After installing Windows, ran Intel utility to update/install all drivers, including Rapid Storage Technology drivers (did *not* update mobo BIOS) I am NOT running any RAID.Again, everything seems to work really nicely, right up until the point it decides to instantly freeze It's hard to troubleshoot because it's so random, I don't know when to expect it, and after it happens I can't bring up any tools (i.e. Resource Manager) to see what's going on.
no place on any website can i find out if a intel ssd work in an amd gaming computer.
windows 7 ultma system mother board msi 890Fxa-GD70 amd phenom II x 6 3.2mhz 16 gig gskil ram
[code]....
i want to add as boot drive intel ssd will i have to reformat all drives to the new format/control and will the intel ssd work in system it does have usb 3.0 and sata 3 i actually have 5 of these systems and trying to finish up the last one.
i am looking to build a new PC and will include a Corsair SSD.. need some information re TRIM support..Win7 I understand supports TRIM but do you need to install a program or is this already in Win7?
