my system is a Gateway sx2800 with windows 7 64 bit OS.I just reinstalled my windows 7 os and various software that i use.My son was playing an internet game that needed Adobe Shockwave downloaded to play.Download seem to go fine, but when I came back to my computer about an hour later i found that my internet connection was gone. System says internet adaptor gone/no driver found.
View 4 RepliesInstalled Windows 7 on two home-network computers. Everything appeared to be good, including networking, but I could not access printers (linked through each computer) with the opposite computer. Windows update offered an update for the Broadcom 802.11n network adapter, but when I installed the update I completely lost the network.
I had to revert to the old driver in order to reastablish the network. But the printers still are not recognized. The network adapter on the secondary computer is a Linksys WMP300N. I did try turning the router off for ten seconds with the updated driver but that had no effect.
Anyone had this problem?
Currently I really really need your help for solving one of my problem below:
-I have cut one file (>5GB) from file server and past it to my Local Drive (D.
-During that process I got problem with network connection , so the process still ask to retry the process. After the connection is back, then I try to click on Retry and the process is completely finished.
-BUT the problem is both source and destination is empty, no file found.
Did any one know what the problem with this process?
And how can i get my important data back?
I have a problem with mapped network drives disconnecting.
I run Windows 7 Pro connecting to Win Server 2003. Reboot and the drives are there. After a while a red cross appears against them in Explorer. I can usually see the contents, but running a program that requires those resources fails.
The only way I can reconnect is to reboot, but then the red cross appears again after a while.
I've updated the LAN driver and even tried setting the registry key MaxNonpagedMemoryUsage to 0xFFFFFFFF as recommended in the only comment on the subject I've been able to find.
I'd really appreciate some help here as I don't want to go back to XP!
I have a wireless router for a desktop...want to use it for mini notebook, lost security key!
View 5 Replies View RelatedI have two PCs cabled directly to a Netgear WNDR4500 router. This morning, my Windows 7 PC had no network connection when I turned it on. These computers don't get moved, I wasn't messing with the cables beforehand. Everything was fine yesterday.The Troubleshooter suggested I had a broken cable. I tried another cable, but it still would not work. I connected the Windows 7 machine to the same router connection my XP machine uses, but it still did not work.Device Manager reports the Network Adapter is working properly. The system tray network icon reports "Not connected/No connections are available." The Troubleshooter reports, "A network cable is not properly plugged in or may be broken." I tried disabling/enabling the Local Area Connection, but it still reports "Network cable unplugged." My gut feeling is that the Ethernet jack on the motherboard is physically broken. But it blows my mind that it would break for no reason.Could an automatic update of some sort disabled networking in a way that it only appears the cable is bad? Could the physical connection at the back of the machine spontaneously break? I suppose I could go buy a network card, which would be cheaper than replacing the motherboard. I'm gonna get cleaned up and head to the store now.
View 7 Replies View RelatedMy desktop has recently been upgraded to Windows 7 Ultimate from XP. I set up a home group at another location, then returned the desktop to my normal connection. The wireless card I used was a D-Link that is XP compatible only, and I found this out after attempting to install, then I checked on it later. I deleted the driver, and tried a Netgear WT111G USB wireless card. Install failed, and I went online to look for a compatible driver.
I downloaded a driver, installed it, and the wireless card was detected, but could not connect to the internet. Uninstalled the driver, and tried plugging into Ethernet, and cannot find my home connection. Can only get into network settings (home,work,public).
Has any one here heard about this problem after creating a homegroup? Trying to troubleshoot, but it's a specific problem I'm not familiar with as of yet.
The faulty drivers are no longer on the PC, but it's still unable to find a direct wired connection.
i lost network adapter in manager device
View 3 Replies View RelatedI had problems with my computer not connecting to the network sometimes after restarting my computer. That was usually fixed by simply unplugging and replugging into my outlet. I have a hard wire connection and my ethernet cable gets plugged into the wall and connects to the modem/router (whichever it is) from there. After I reset my computer this morning though, my computer has absolutely refused to connect to the network. I've tried resetting the router/modem and unplugging and replugging in my Ethernet cable. I noticed however in the network center it showed me connected to Network 8 (my standard home connection) for a few seconds but then it changes to unidentified public network and breaks connection to the Internet. Wireless is working fine and I'm infact typing all this on my iPhone 4.
View 1 Replies View RelatedI can�t get online. Icon in taskbar says I don�t have a network connection. Upon exploring, I find that Windows 7 Pro has me setup for a �public network��which has a yellow exclamation mark on the left side between my PC and the network, and a red X on the right side between the network and the Internet.
DETAILS:Dell desktop PC. Was running Windows 7 Home, now running Windows 7 Pro (full install; not upgrade). I had a malware problem (images on webpages and links, etc. were not visible to me) with W7Home; cleaned it and went to W7Pro. However, now I have this whole new and far worse problem with W7Pro. (See �problem� above.) NOTE: I am the only person in my house and the only person using the computer. So I never had it set up for a network. I only own the desktop PC and don�t need a network. The �network� that is now set up on my computer was set up by W7Pro by itself as part of the problem. My IP is not static so I can�t input my IP manually�it�s set to automatically detect. Called cable modem service provider; they made the assumption my operating system came with my PC and told me to call Dell for support. When I explained my OS didn�t come with the PC, they then said �You need to talk to Microsoft.� Uh---no. The cable modem service provider said their server is talking to my PC�my PC is unable to get to them. (Makes sense, as that matches the pictures I�m seeing with the exclamation mark and red X.)
I'm running Windows 7 Ultimate on a network w/ 2003 Windows domain. When I first added this computer to the domain, everything worked fine for about a month. Then one morning I came into the office, tried logging in and received a message that the computer has lost it's trust connect with the domain.I logged into the server w/ the DC, reestablished the trust connection from the server side but the comp is still giving me the "Can't establish trust connection" error message when I logged in. My current workaround is unplug the network cable, log into the comp then replug the network cable.
View 1 Replies View RelatedI have a hp compaq laptop and am able to use the wireless internet connection..however I also have a Dell Inspiron notebook, a few days ago I lost internet connection on the dell but the HP was still connected. I have contacted my internet provider and they say there are no connection problems and all is fine. They think the problem is on the dell unit. I have tried disabling and enabling the Lan and wireless network connection. The system recognizes the wireless router but wont connect to it why and what can I do.
View 7 Replies View Relatedi lost my webcame driver Cd 012.
View 1 Replies View Relatedi have lost my driver of web camera.Ihave inspiron1440 model n windows7 as an operating system.
View 1 Replies View RelatedI've been using Outlook 2007 for a while with no problems. I used to select my account, and when the "Enter Network Password" box popped up it had the focus, so I would just immediately type in my password. I did a set of Windows and Office updates a couple of weeks ago, and now when that box pops up the focus is still on the main Outlook mail reader screen. I have to click the Password box to shift the focus so I can type in my password. Is there a way to restore this automatic focus for the Password panel when it pops up?
View 1 Replies View RelatedI had Windows 7 32-bit running on a Dell PC. About one week ago, I noticed Internet connectivity was gone and that there was "limited connectivity" as I was now connected to an "unidentified network". The other systems on the network are still connected and working perfect; the problem is isolated to this one system. The network uses a static IP scheme. "IPCONFIG /ALL" shows that the IP is assigned, is included on the correct subnet and has the correct gateway and DNS information. I've tried a host of solutions suggested on forums; from "route delete 0.0.0.0" to disabling my firewall to configuring for a dynamic IP. Nothing has worked. Reluctantly, I resorted to a fresh install as I began to worry that I may have picked something up. I completely wiped the hard drive and did a fresh Windows 7 32-bit installation all only to have the same problem. I assume that the NIC is functioning as it accepts all IP settings.
View 1 Replies View RelatedI have a HP Touchsmart 300-1060a (Home Premium Windows 7 64 BIT) which I bought few years back. Now for the last 6 months or so I started getting issues with my machine was not displaying anything at all after turning it on. So I had to hard reset my power from the machine and then was able to see it started displaying again.At first I suspected graphic card (NVIDIA GEFORCE) but then I did my diagnostic test and nothing was found.One day, I started re-imaging my machine as a fresh and then after this it never came back ONLINE. I read all HP forums & even HP Online support was unable to help me to find the cause.Because when I turn on my machine I can see the power light was on and could hear big fan noise but mo HDD activity at all.So at this stage, I suspected either motherboard or BIOS but wasn't 100% sure what could be the real cause because I was sure it was not due to graphic card.So first I re-setted by my BIOS to see if it helps but it didn't came up at all. So then I took my machine to a Computer repair shop (a friend of mine) and we detected it could be due to the regulator which supplies power to the CPU and motherboard.So we replaced that part and now my HP Touchsmart is running fin since then.But I have lost my HP Startup logo with options such as below: [code]
View 4 Replies View RelatedI delete my music driver .how can i ge it back.
View 2 Replies View Relatedi lost my all driver of dell laptop
View 2 Replies View Relatedmy laptop lost dvd-rom driver.matshita dvd-ram uj890as.Can you tell me where i can download it?
View 1 Replies View RelatedI want drivers of umax astraa5800 kindly give me link
View 1 Replies View RelatedThe NVIDIA OpenGL driver lost connection with the display driver due to exceeding the Windows Time-Out limit and is unable to continueError code: 7I keep crashing, is thereI tried the W7 fix, that did not work. I installed older drivers, after installing the newest ones[CODE]
View 4 Replies View Relatedi wiped my laptop n i reinstalled everything but now it wont read or burn discs
View 1 Replies View Relatedi connect the net setter but sum huawei mobile driver lost.
View 1 Replies View RelatedI recently purchased a new computer with operating system Windows 7. I had sound until I downloaded the drivers for Logitech wireless keyboard and mouse. I am at a loss as to how to get my sound back and continue using the keyboard/mouse.
View 7 Replies View Related(Problem 1)I've lost the driver after restart,
(Problem 2)got really annoyed with the cursor rings
(Problem 3)and experienced slow pen action.
Working for severeral days with these issues, uninstalling, reinstalling, deleting preferenses for the wacom intous 3 tablet, delaying the wacom driver load... and so on.., did not help that much. Nothing I tried worked out completely perfect. Therefore I made a decision to follow the procedure below, - to solve all of the problems mentioned, and it's working!I write this to hopefully spare some people the unnecessary time and frustrations with these problems. Win 7 are equipped with software for Tablets PC's, which's interferring/messing up the wacom tablet driver.(The lost driver)I was thinking; do I need the Tablet PC in Win 7? Answer: No! I have a Notebook.But it didn`t work out just to disable the Tablet PC in "Computer management, Services." (Right click on My Computer, Manage, Services And Applications, Services)is drastic and pretty time consuming, but for me absolute necessary for a permanent fix.I saved all my settings and files, reformatted and reinstalled Windows 7 and all the programs.
I followed this algoritm:Reinstalled Windows 7 First: I did not plug in the wacom tablet, and did not install the wacom drivers at this point.Installed all my programs EXCEPT Wacom drivers, did all the updates for windows and my programs except anything regarding the wacom tablet (The cursor rings)cursor rings from the pen following this article: Configuring Windows 7 and your Pressure-Sensitive tablet to avoid cursor(The driver)Restarted the computer Disabled the Tablet PC in "Computer management, Services," because I don`t need this application at all. (Double click on "Tablet PC" or right click / properties, disabling)Restarted the computer to be safe, but I could possibly just stop the service Now, I installed the wacom driver, making sure I installed the driver BEFORE plugging the tablet. I used the current driver version Wacom pro615-3a_int.exe.Then I checked to see if there was any windows update to my wacom tablet, (control panel, windows updates) but there wasn`t any. If there would be one, I will make sure to disable it, because I don`t want Microsoft to mess with my tablet!(The slow pen action)I changed the settings in Control panel for Pen and Touch:Selected the Flics tab and
- deselected "Use Flicks to perform common actions quickly and easily"
- deselected "Display flicks icon in the notifications area"Selected the Handwriting tab and
- Selected "Don`t use automatic learning, and delete any previously collected data"Hitted the OK button. (These settings will only slow down the pen action, despite what it says)
I have to critiscize The Microsofts, as said - giving me severeal days with frustration and destroyed productivity?
i lost scaner driver..could u please provide a link...
View 2 Replies View Relatedmy laptop is hp pavilion g6 notebook pc >> my problem is with the ethernet controller driver and the network contoller driver >> after i had install a windows 64 bit i couldn't find these drivers.
View 8 Replies View RelatedA few days ago I did a clean install of Windows 7. Now I have a problem. The computer is a wireless 'client'. It has a Realtek RTL8168D/8111D PCI-E Gigabit Ethernet NIC (NDIS 6.20).
When I bring up Device Manager and expand 'Network adapters' I see "Realtek PCIe GBE Family Controller".
When I expand 'Other devices' I see "! Network Controller" (Note the exclamation point.) Double click on that and I see "The driver for this device is not installed. (Code 28). When I click on Update driver I get a message Can't find a driver. I have tried many times with different source folders and files and nowhere is a driver found.
I have gone to MSIs driver web page and downloaded the Realtek PCI-E Ethernet Driver for Windows 7 32/64 bit "realtek_pcielan_7_nb.zip", extracted the files and still no joy. (M/B is MSI G41M with Intel E7400)
There is a wireless icon in the tray. I click 'Open network and sharing center". No matter what I choose Windows 7 ends up telling me to plug in an Ethernet cable. No, this is a client not the server. I have verified that the NIC can connect to the computer with the Ethernet cable by using the old XP hard disk.
Any suggestions?
want network controller driver and pci device driver.i have hp,amd laptop and use windows 7 32 bit?
View 1 Replies View RelatedI am looking for the onboard network driver for Asus m2n sli-deluxe win 7 64 bit
View 5 Replies View Related