I got a popup window that says your hard drive failure is eminent backup your computer. so I created a backup disk uninstalled windows 7 reinstalled 7 booted up and got the same message The message reads disk drive failure is eminent back up your computer press f1 to continue. My question is how do I get rid of this message. Tried Dereks boot and knuke and was only able to wipe 15% of the hard drive.
View 2 RepliesStarted experiencing playback lag on most movies that were stored on my E Drive which is a 500gb western digital, taking a movie off that harddrive and placing it on my C drive(150gb WDraptorx) sometimes would hang during the file transfer for 10 minutes then start up again. playback would be smooth if played from my external or main c drive , so i thought this could be my E drive was failing, so i tried a disk check over night but was only 10% when i got up and didn't seem to be moving at all.1week later i get a BSOD and freezes for 15 minutes so i did a hard reset, freezes on loading screen for windows and BSOD once again, once is started up in bios got windows is missing a certain file and prompted me to system restore and was freezing every couple of minutes but completed successfully. 2 hours later i get BSOD and BIOS reports the C drive as BAD. did a check disk for it and had a ton of unreadable sections but it completed, haven't been able to get back to windows since. ATM am trying start up repair but its already on 2 hours +.Should i take the main drive out and install windows on to my secondary or is it possible that they are both failing and should just purchase a new hard drive.
View 9 Replies View RelatedSo I am here because I am having some hard drive problems. Firstly for my Primary drive i am still running my old 250gb Hard drive (with windows already installed on this drive). Secondly, for my slave drive i have a Samsung Spinpoint 1TB Hard drive that wont display in my bios or in disk management. The 1TB drive seems to spin up fine etc. but i just can get it to display. i can format this new disk. Also i must add that my motherboard is an ASUS p8z68-v-pro board.
View 9 Replies View RelatedI have a W7 upgrade disk which I purchase when W7 was release and my l copy of Windows XP SP2. Is there any way I can just install W7 on a newly formatted harddrive.
Reason:
I have a trojan virus they cannot be deleted, it can only be quaranteen. Unfortunately while quaranteened, it still creates temp files...more than a 100. After trying numerous outlets: Symantec, my product is Syamantec Endpoint Protection., Mcafee on-line, Trend Micro House Call and Web Root Secure anywhere, I am afraid I will have to reformat the drive andi install from scratch.
im usin 2tb segate new hard disk sir..in my system i cant able to boot my os and also my hard disk...its showin that hard disk boot failure insert system disk press enter ...i restarted many times its sayin the same problem...in my gigabite mobo bios my hard disk is not get detected sir....the problem is that wen im installin the new os for 2nd time its all went nice only sir but at the completion of the os it wil ask for the user name and password but in my system its frozen sir fully of black screen and i cant able to do anythin so i restarted my system from that im gettin this error as hard disk boot failure insert system disk press enter.....that my new hard disk and all of my data is in that hard disk only..this problem arises wen im installing the os for 2nd time sir.
View 6 Replies View Relatedwindows 7 disk boot failure insert system disk and press enter
View 1 Replies View RelatedI woke up this morning, and I found that my computer was displaying this message"Disk boot failure, insert system disk and press enter". There are a ton of needed documents on the computer, and I'm hoping that they can be saved some way.
View 5 Replies View RelatedI've been having this error even after reformatting and reinstalling Windows 7 on my desktop. I've done reformatting / reinstalling Windows 7 several times, yet the problem still occurs. I'm thinking of my HDD as being corrupted or messed up. The problem occurred after I accidentally hit the CPU when I was stretching my foot. The screen froze after that. Upon rebooting it, 'Disk boot failure, Insert system disk and press enter' occurs. After I entered the DVD installer of Windows 7, the screen just hangs.
View 9 Replies View RelatedMy friend bought a new PC and needed to put am OS on it. He put in the W7 disk and the error message 'disk boot failure insert system disk and press enter' appeared before installation was shown. He has tried changing around BIOS and it also recognises the hard drive and DVD/ CD ROM drive. Here is the specification he was given:Case : CIT Reaper Black Mesh fronted Tower CaseMotherboard : Gigabyte 78LMT Motherboard TechnologyCPU : AMD Bulldozer FX 4170 4.2ghz 8mb CacheHard Drive : 1tb Sata Hard DriveMemory : 8gb DDR3 1600mhz MemoryOptical Drive : 24x Dual Layer Sata DVD WriterGraphics Card : Nvidia Geforce GTX 650 2gb GDDR5 With HDMIPower Supply : 750 Watt Branded Power Supply Also, he has tried booting BIOS in different order
View 3 Replies View RelatedWhen starting the computer, I keep getting "Disk boot failure, insert system disk and press enter". Nothing works other than putting in the boot disk and hitting the restart button on the tower. Then it will boot up and run fine. But how do I stop it from having to have the disk in order to load? Checked in the BIOS and the hard drive is the first load.
View 3 Replies View RelatedI tried to add a new 1TB HDD into my computer. not realizing what i was doing wrong. i just threw it in there no software or anything. now my PC is getting "DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER" and i no longer have my windows 7 disk. is there anything i can do ?
View 1 Replies View RelatedI started my pc,and i get this error."disk boot failure insert system disk and press enter"
Windows 7 will not load.I have the disc which i assume re-installs windows 7? Will this delete all my files i currently have on the drive?
I want to do a 'custom' reinstall on my C: drive. It's clogged with unused programs and it runs very slow.I set the BOIS to boot from HD and CD; neither worked. I purchased a new HD and may want to install it as my C: drive.I set the BOIS to boot from CD; still I get the dreaded message:"Disk boot failure insert system disk and and press enter"I recently installed a new mother board due to the fact it was defective, not as an upgrade.To make it clear I already had Win7 Ultimate installed. On my first attempt to perform #1 I got to the question of which install did I want; I clicked 'custom'. From then on nothing happened, and now I keep getting "THE DREADED MESSAGE".I put my win7 disk in another OSXP computer and it displayed, "This disk is not compatible with this system" so I assumed my disc was not corrupt.I bought my win7 disk legally on line a couple of years ago, and I have used it once. Will that be the problem? I never got to the "License key" so I don't see how it could be?
View 4 Replies View RelatedRunning Windows 7 Home Premium. For three days now I have seen nothing but the error Boot Disk Failure when trying to boot up.. I can overcome it by putting the IOS 7 disk in the DVD CD drive and let it boot so that I can then run the repair on the computer. I borrowed an OS 7 install disk and the same thing happens. After a series of checking the system I am informed that nothing wrong was found. If I leave the disk in the drive, even through rebooting, the machine runs just fine. If I take the disk out of the drive, I am dead in the water until I put it back in the drive, reboot and let the tests start over again and all is fine.
View 14 Replies View RelatedWindows 7 64bit has popped up saying it has detected a HDD problem, I need to back up my files immediately. I installed a new 2TB HDD (Samsung HD204UI) a couple of months ago, surely it shouldn't be failing already? This is my secondery disk. Is this by any chance a malware or virsus playing tricks on me?
View 7 Replies View Relatedfirst it cannot load BCD, so i try to rebuild it, but nothings happen, next is I reformat may hdd, yes, win 7 installed fluently, but after I restart it won't continue on loading the windows, and restart the system automatically, after that it boot on repair, and it detects sector error on hard disk, then I let system repair to do it, after that it restart the system and boot again to system repair, and it was a loop...I already re installed by OS thrice.
View 1 Replies View RelatedMy system is configured with a SSD drive for my Windows 7 x64 Partition (C:) and I setup two 500 GB drives in a RAID 0 config (Z:) to host only game installations. One of the hard drives suffered a heart attack (I can only assume as there was no warning signs) therefore wiping out my games partition (all my saves are backed up to a remote location). Now, I'm trying to re-do my raid setup with a new drive, but when I try installing Steam (it's an .MSI file), it tells me that: "Error 1327.nvalid Drive Z:" and crashes prematurely without any option to specify another point of installation, the same happens when I try to uninstall via "Programs and Features" in the Control Panel. Now, I have quite a few games that are still showing up, and I get the error "Ble bla blah no longer exists or
View 1 Replies View RelatedI am running Windows 7 32 Bit Home Premium, and at random times the PC will shut down and come up with the BSOD. After I try to boot up the computer I get a message saying 'Disk Boot Failure Insert system disk and press enter. Most of the time the only way I can get it to boot up is if I open up the case and disconnect the hard disk and dvd drive and reconnect them. On the initial screen after pressing the power button, it'll take a while before it detects IDE drives. If I don't disconnect/reconnect them, then at the initial screen it will sit at that screen and will not detect any disk/dvd drive.Does anybody know a proper solution without having to disconnect and reconnect the hard disk/dvd drive as I think that this may not be a good idea?
View 4 Replies View RelatedI have a modified HP Media Center Edition. My dad was on it and said that it crashed with a BSOD. When I rebooted it said Disk boot failure, insert system disk and press enter. I inserted the Windows 7 64 bit Ultimate installation disk that I had used to install this copy and the computer booted. Thee black screen with the windows logo showed before the computer did another BSOD. The message read:
"PAGE_FAULT_IN_NONPAGED-AREA". I booted the computer again and attempted to do a system repair but it said that the problem could not be repaired automatically. I was unable to do a system restore because it said no image was saved. I keep getting the BSOD every time I attempt to boot. I have not recently added any new hardware and there is nothing in the USB ports.
I notices some sound issues so I restarted. Then my computer froze seconds after windows had launched like on the web. After cleaning my fan and stuff it worked again I feel asleep watching something and awoke to a froZen black screen. I restarted and have been getting disk boot failure ever since.
View 9 Replies View RelatedI have a "DISK BOOT FAILURE" error during startup. I just installed Ultimate x64 and now this error appears. It was OK on Ultimate x86.
I detached all hard drives and USB devices except system disk and DVD ROM and still error appears. I booted from installation disk and ran repair and still error appears. I booted again from installation disk and ran next cmd:
bcdedit /export C:BCD_Backup
c:
cd boot
attrib bcd -s -h -r
ren c:ootcd bcd.old
bootrec /RebuildBcd
and still error appears.
The only way to run Windows 7 is to insert installation disk to DVD, wait until message "Press any key to run from cd or dvd", DO NOT press any key and wait. In a few seconds Windows 7 starts.
I am running Windows 7 32 Bit Home Premium, and at random times the PC will shut down and come up with the BSOD. After I try to boot up the computer I get a message saying 'Disk Boot Failure Insert system disk and press enter. Most of the time the only way I can get it to boot up is if I open up the case and disconnect the hard disk and dvd drive and reconnect them. On the initial screen after pressing the power button, it'll take a while before it detects IDE drives. If I don't disconnect/reconnect them, then at the initial screen it will sit at that screen and will not detect any disk/dvd drive.I have 4gb of ram (3.21 usable) and 10 mins after booting up, my PC will be using 1.20gb of ram and I have only opened the web browser.
View 1 Replies View Relatedmaybe a week or two ago every time i start my computer it showed a black screen and said Hard Disk Failure iminent and have me to back back the hard disk and remove it.
Just today i start my computer and press F2 to continue the blue screen came up and now i can't go to the desktop and can't event use safe mode. I'm using another computer to open this thread.
What should I do???
So starting last week, my computer started getting a blue screen. So yesterday it was so bad to the point where it wouldn't load windows at all. So I ran Ultimate Boot CD and it diagnosed the HDD was messed up. So I wiped it clean using Dban and now I'm trying to reinstall Windows 7 Professional but whenever I put the disc in and restart the rig I get a "DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER"
Oh and if it helps, the rig is only like 6 months old. I did some reading and the only lead I have is to format the HDD and try again. I am also just realizing that I'm a dumbass and should have done system recovery, but too late now.
My system is a Hewlett Packard CQ 1040UK
AMD E350 1.60 GHZ
3.00 RAM
64 bit OS.
It is six weeks from new. When I load a dvd rom into the drive bay at the front of the computer the dvd is taken into the machine. When I try to play the disc I get the message 'insert disc'.Watching DVDs worked perfectly until a few days ago.
A while back my computer crashed when playing ARMA2. I was playing and suddenly my screen turned black but the sound kept playing. I did a hard reboot and i got a Disk Boot failure. I decide to do another hard reboot and the computer turned on normally. After this i haven't had any problems any more.
Until yesterday when i installed a new game (Dishonored) A minute into the game the same thing happened as with the ARMA2 crash. Screen turns black but sound keep playing so i did a hard reboot. I got a Disk Boot failure but after a hard reboot it is gone again. But unlike with the ARMA2 crashes this happens every time i try to play dishonoured. I reinstalled the game on a different partition of the same drive and it stilled happened although this time it let me play for about 5min. But i don't think it had anything to do with reinstalling it on different partition it seems to randomly crash within 1-5 min.
I check a few other games and they don't seem to give any problems. I also did a chkdisk of the drive the game is installed on but no problems where found. I also did a memtest86 but also no errors.
My Windows is installed on a SSD but the game itself is installed on a HDD. don't know if that matters but i thought i just add that.
So is it the game or is it the drive ?
2 days ago, my laptop stopped working and when I rebooted it, it didn't let me get into windows and took me to startup repair and after 24 hours, nothing happened, so i decided to reboot my labtop again (while it was doing startup repair still) and i used recovery cd to try to repair but it said "Imminent Hard Disk Failure" and i click continue with the startup repair, my CD work ( got into the options) and i chose startup repair and it work but after that i gave me that my Hard Disk Failer
View 8 Replies View RelatedI seem to be having a problem with some disk boot failures. Two weeks ago, I opened up my computer and I got a disk boot failure. I manually closed the computer and opened it again afterwards, and the computer started up normally. Today, my computer opened up normally by itself. I left the computer alone for five minutes, but it restarted by itself and brought me back to the same screen that I saw two weeks which told me I had a disk boot failure. I manually closed my computer and opened it again, and the computer started up normally as well again.
View 26 Replies View RelatedSetup 4 disks on a windows 7 PRO unit using the disk manager raid utility. Created a JBOD. On re-boot, all drives are reflecting a failed message.
View 1 Replies View Relatedso i was trying to change my sound card, but the new sound card wasn't compatible with my computer. So i went ahead and put my old sound card back in, screwed everything back on. turned on my computer, and next thing i know it says, "disk boot failure, insert system disk and press enter". All i did was try to change the sound card. I don't think i unplugged anything else or moved anything around. I made sure everything was in securely too.
View 2 Replies View RelatedI get message windows failed to start. a recent hardware or software change might be the cause. It tells me to load installation disk for windows 7 and then I get boot failure.
View 1 Replies View Related