I am getting the all installed components were removed via the rollback feature while trying to download a game. I see some topics for other Windows programs such as Vista, but not for Windows 7. How can I install my games?
View 1 RepliesI installed a power supply and removed the floppy disk from a Dell Optiplex GX520. Now when I turn it on, it says there is no serial ATA SATA-2 nor parallel ATA, Path=0 (Pri Master.) Everything is working so I don't know what the problem is.
View 2 Replies View Relatedwhen I run the application newsid.exe. after the application process is complete I rebooted my computer. but. one irregularities. ie I can not open files that are on my documents and I can not open files on the desktop. when viewed in the documents and settings. the list grew and the user should have a user folder "user.RDM" (RDM is the name of my computer.).
after it happened I can not access the files that were old, and my computer will look like new again. please help me .. because I lack experience in this regard. please how do I get to rollback. I want my computer back before using the application.
I recently upgraded to SP1 via Windows Updates. Also, IE was upgraded from 8 to 9 around the same time. Ran a disk cleanup, and removed SP1 backup files. Tried to rollback from IE9 back to 8. IE9 is successfully removed but 8 does not come back. I cannot find a standalone installer for IE8 for Windows 7 either.An upgrade install of Windows 7 Ultimate SP1 x32 fixes this issue, but since it is an upgrade, I can no longer sysprep. Being able to sysprep is a requirement. Therefore, I cannot do an upgrade install.
View 9 Replies View Relatedi download nfs run but it was not open he give the eroor of vedio card
View 1 Replies View Relatedi installed gta iv but game is not open in my pc
View 2 Replies View RelatedI Installed A Bootleg Version Of The Video Game Hitman Contracts On My Vista Home Premium And When I Open It, It Says " ERROR, Please Close And Windows Will Notify you If There Is A Solution". I Saw An I-con Pop Up In The Icon Bar And When I Open It It Tells Me Some Sort Of Protection Has Blocked Use Of The Game Because It Says It Can Harm My Computer And When I Open Up The Settings And Put The Game Into The " Allow These Files Only" It Tells Me I Cant Do This.
View 1 Replies View RelatedWent through the recommendations for upgrading to windows 7 as per instructions on CD. Anything incompatible was removed, uninstalled prior to set-up. On first run through set-up failed, BUT, this was easily rolled back. Not so easy the second time round where there was no option to roll back. On rebooting I could not access any of the software programmes on the pc. Instead I was taken straight to the command screen:
X:$WINDOWS.~BTWindowssystem32>
The only access I have to all my directories is via this screen.I did attempt to a system restore but was asked to identify which system to restore and was unable to do that as I am not very technical.I can, by hitting F8 get to the advanced boot menu, but none of the options listed there function. When selected they take me back to the command screen. If I exit the command screen the pc reboots.Is there any way I can get to restore my previous o/s Vista and then hopefully I can get to do a clean install of windows 7? it currently looks like I am running two opeating systems and windows.
when i play atlantis 3 game the game is shut down in middle of game at a certain point
View 2 Replies View Relatedi just installed windows 7 and i want to set downloads while im sleeping. than when i wake up i saw that the game download is only 20% so my computer does "half shut down" the lights are going down and i cant download any game like that. so can i turn it off?
View 3 Replies View RelatedI can't seem to find a device I want to download free ninja fruit-slice full version on my blackberry
View 4 Replies View RelatedDownload game spider for windows 7
View 2 Replies View RelatedOn 4/19, I downloaded a game from wildtangent and my pc became extremely slow to the point of crashing because pages were taking so long to download. I unstalled the game (using Control Panel) on 4/21 and though uninstalled, still had the same problem. On 4/21, I attempted to use System Restore to restore my pc to a date before the game download BUT the earliest system restore point was actually 4/21, including my checking the box to "choose another restore point". Win XP would save restore points for one to two months prior, with Windows 7 it's anywhere from one to a few days and in this case, the same day. WinXP was the best of the Windows versions and Windows 7 has been nothing but problematic. My pc with Windows 7 is a year and a few months old and Windows 7 has been one problem after another. Restoring to factory settings will wipe out everything on my pc so is there a way to restore my pc to before 4/18/2012?
View 5 Replies View RelatedI have a windows 7 laptop, but when I put the Theme Hospital disc in the drive, it comes up with a message that says:
The program or feature "??D:WinSetupSetup.exe" cannot start or run due to incompatibility with 64-bit versions of Windows.
I have a sam problem and i have no idea what this means... is there any way to get the game to work?
need driver for above
View 1 Replies View RelatedUsed RT Seven Lite to slim down windows, but may have done a little too much in terms of removing Windows services (RasMan, etc.). Is there a way to reinstall the Windows components?I did try to manually create the services using sc create and trying to duplicate the service from another box, but so far it hasn't worked out that well
View 2 Replies View RelatedI've found this guide Windows 7 Installation - Transfer to a New Computer for changing all my components except HDD.My question is, I currently use my install as an HTPC. If I use the sysprep method, will the codecs (ffdshow etc) work correctly afterwards, or will I have to go through installing them all again?I understand graphics drivers will need re-installing.
View 3 Replies View RelatedI would like to know about the features and components of ultimate , starter , entriprise
View 2 Replies View Relatedevery time i go to major windows components such as add/remove programs, user accounts etc it refuses to open. I also dont get any error messages but just a click and then nothing.
View 4 Replies View Relatedafter a complete fresh install of windows 7 (the computer will be completely blank excluding the OS) what components (GPU, CPU, Motherboard, etc.) will require drivers to function properly and where would I acquire these drivers? Also are there any tips or things I should be aware about when restoring my PC?
View 7 Replies View RelatedI have met some problem when formatting my laptop when the formatting process reaches the complete installation of windows 7 part,it suddenly says that the windows cannot configure one or more system components n ask me to restart the installation for windows 7.I kept trying for many times but the result is still the same.So,i would like to ask is there any ways to solve this problem??
View 2 Replies View RelatedI am performing a clean install of windows 7 on my sony VGN-FW520F (which had Windows 7 previously). I performed a secure erase of the HD with "Clean All" command in DISKPART and reformatted the drive in ntfs. When I install Windows 7 64 bit I get an error 85% through that says "windows could not configure one or more system components" and requires a new installation. Did I wipe critical drivers from SONY that are needed to perform an install? If so what steps do I need to take to install Windows 7?
View 4 Replies View RelatedI just recently updated from XP to 7 and everything was fine for a few weeks but that honeymoon seems to come to an end.
First symptom was that Messenger couldn't connect, and after a few days I uninstalled it and tried to re-install it. Well, the installer couldn't connect anywhere to get files and I decided to let it be.
Then I installed some new hardware and allowed Windows to connect somewhere to get the drivers (I don't usually do that, but with this hardware it has allways worked well) and it couldn't find anywhing this time. I just thought that 'well, windows, it's allways a different battle' and got the drivers from the hardware manufacturer.
Now I would really like to get the Messenger up and running again and tried to look at it again. I thought maybe I should do a windows update first and off I went. At this point I realized that the problem lies deeper than Live Essentials / Messenger. After just 1 or 2 seconds the update tells that some updates (=none) couldn't be installed + error code 8007273D which 'surprisingly'
From day 1 I've had Zonealarm and Avast! running, I've also tried with them turned on but no help.
I tried to install Win 7 Home Premium 64 bit on my brand new rig and I kept getting a "Windows could not configure one or more of your system components". I tried reformatting, changing the SATA to IDE and AHCPI, nothing worked, so I installed Home Premium x86. Being a 32 bit system it only recognizes 3.5gb of my 8gb Dual Channel DDR3 with 4.5gb being "system reserved hardware".
View 7 Replies View RelatedTo start, a quote from Windows 7 EULA: Quote: ... 2. INSTALLATION AND USE RIGHTS. a. One Copy per Computer. You may install one copy of the software on one computer. That computer is the "licensed computer." ... As the older geeks certainly remember, in earlier Windows versions it was possible to use different hardware profiles. You simply got a boot menu asking which hardware profile to boot.In 7 this is not possible. You have to manually disable or enable the hardware components when the need arises.
What if I install all the software I need, activate Seven, then create a system image. Shut down the computer, disconnect the Windows 7 HD, attach an equal new HD, use recovery tools to return the said image to this HD number 2. Put HD 1 back, use BCEDIT or a third party tool to create a boot menu which at this point would include two absolutely identical Seven installations.Then strip down Seven setup #2, disable all unnecessary devices etc. thus creating a Seven - Seven dual boot environment, with two different HW-profiles. The computer is the same, only one of the two Sevens could be used at any given time, and so on
Windows could not configure one or more system components To install Windows, restart the computer and then restart the installation i get this message on clean windows 7 instal i formal my disk and custom instal from boot and on compliting instalation i get that error?
View 6 Replies View RelatedFor my custom computer I want it to have all of the proper parts in front (power, reset, LEDS, USB, audio), and I found how to do the switched and LEDs, but not usb ports and audio jacks. where do I get these? I can dissect a USB hub and wire it to a header, but a premade solution would be better.also i'd like to install a SD (and maybe MicroSD) card reader without using a drive bay (and ideally using the same header as the usb ports).
View 9 Replies View RelatedI originally partitioned my Toshiba NB205-N210 for Windows XP, so I only gave the system partition 8GB.Recently I installed Windows 7 Ultimate (x86) and of course 8GB is too small for it to really work well. This is even if I have enabled "compress files" for C: and I've already removed everything from "Turn Windows features on or off".I have actually been able to run Windows Update and update everything, but now it wants to install Service Pack 1, and there's not enough room - I only have 300 MB left.When I was researching what I could delete to make more room, I came across a torrent called "Windows 7 Lite - Dark Netbook Edition". The creator wrote that he had removed these components:
- Projector Connectivity
- Speech Support
- Welcome Center
- TV Tuner
- NVIDIA & ATI Video Drivers
[code]....
I recently created a virtual server of window 2008 x86 enterprise edition. I installed integrated components and configured my educational / testing server and things were working fine until I rebooted the host OS and everything seems peachy but after the OS splash screen something seems to be conflicting locking the OS preventing the user login screen to appear. I checked the bios and intel virtualization Is on in the bios and I can load into safemode so the issue must be caused from some conflict that isn't loaded in safemode. Has anyone run into this issue before and what line of thought did they use to fix the problem -posted from the smartphone of a tired programmer so please forgive any grammatical or spelling issue
View 1 Replies View RelatedI was importing 2 virtual machines from VirtualBox to Virtual PC, uninstalling the drivers on Windows 2000 provided by VirtualBox, importing that virtual machine to Virtual PC, installing the drivers provided by Virtual PC, but suddenly i got the following error: D:setup.exe is not a valid Win32 application.
View 6 Replies View RelatedI've been trying to update using the win7 updater to Sp1. I've beeen able to get it downloaded but the installation fails shortly into the process returning a message saying that it cant proceed due to missing components. I've tried one potential fix which is to restore backuped fies from my last usage of driver sweeper, but that did not work.
View 3 Replies View Related