after a complete fresh install of windows 7 (the computer will be completely blank excluding the OS) what components (GPU, CPU, Motherboard, etc.) will require drivers to function properly and where would I acquire these drivers? Also are there any tips or things I should be aware about when restoring my PC?
I was doing some printing and it was fine. Right in the middle of a multiple page print job I got a printer error. Troubleshooter indicted a HP Photosmart C310 driver was missing. I went to Device Manager and every entry under Other Devices was missing their drivers. The C310 printer, the SM Bus Controller and the Ethernet Controller. Windows Update was unable to find and install any drivers. Why all the Other Device components lost their drivers at the same time?
i have dell 1558 laptop.each time i press start button it does not start than again i oress start button than the laptop get start normally. during first press nothing happens, even the start light does not glow.
Does windows 7 OEM require an OPK or do you just install it like a normal full retail version? I have looked for similar threads and all of them are from 2010 or earlier. I was wondering if any of it has changed or you can still just install it without having to worry about the OPK.
Used RT Seven Lite to slim down windows, but may have done a little too much in terms of removing Windows services (RasMan, etc.). Is there a way to reinstall the Windows components?I did try to manually create the services using sc create and trying to duplicate the service from another box, but so far it hasn't worked out that well
I've found this guide Windows 7 Installation - Transfer to a New Computer for changing all my components except HDD.My question is, I currently use my install as an HTPC. If I use the sysprep method, will the codecs (ffdshow etc) work correctly afterwards, or will I have to go through installing them all again?I understand graphics drivers will need re-installing.
every time i go to major windows components such as add/remove programs, user accounts etc it refuses to open. I also dont get any error messages but just a click and then nothing.
Does win 7 require a 'newer' widescreen monitor for best visual? Everything is so small on screen. And the offered alternative configs. all look distorted. My flatscreen monitor is a 15" screen (33cm x 26cm or 13" x 10").
some of my programs require administrator permisson. unfortunately, when I ran the program as administrator, the yes button can't be clicked because it was grey. what's the problem? I already tried to log in as administrator, but the administrator account is disabled. any help please?
I've lost msvcr71.dll from my computer. I'm a Windows 7 Home Premium user and sadly can't run any of my games. They all worked fine before I installed a new graphics card, but my computer kept crashing during game play. So I thought a factory reset might of helped, it has in a way but not for my games (PCM2011, GP4, CSI's).
I just bought a new dell pc running windows 7 which is my first experience with it, however my computer only came with a Drivers and utilities disc. Is 7 not like xp where you use a disc or did my pc just not come with it?
My current motherboard is a socket 775 G41 chipset with 2 x DIMM slots for DDR2 RAM. I currently have 2 x 2GB Kingston RAM in them, but need to increase RAM to 8GB.However 2 x 4GB DDR2 is so ridiculously expensive it is not economically viable to do this.Around �175 for branded RAM or �100 for unbranded stuff that might be dodgy.So I am thinking of getting a motherboard that runs DDR3 RAM, then I can put in 8GB of cheaper DDR3 RAM and even with a new Mobo I am still better off, even using branded RAM.16GB would be nice but I don't think socket 775 mobos exist that support that much.I am keeping the same CPU (Core 2 Quad Q8300) and everything else.Running Windows 7 64 bit. My question is will I need to reinstall Windows? in fact I probably wouldn't bother if that was the case.
I have met some problem when formatting my laptop when the formatting process reaches the complete installation of windows 7 part,it suddenly says that the windows cannot configure one or more system components n ask me to restart the installation for windows 7.I kept trying for many times but the result is still the same.So,i would like to ask is there any ways to solve this problem??
I am performing a clean install of windows 7 on my sony VGN-FW520F (which had Windows 7 previously). I performed a secure erase of the HD with "Clean All" command in DISKPART and reformatted the drive in ntfs. When I install Windows 7 64 bit I get an error 85% through that says "windows could not configure one or more system components" and requires a new installation. Did I wipe critical drivers from SONY that are needed to perform an install? If so what steps do I need to take to install Windows 7?
I just recently updated from XP to 7 and everything was fine for a few weeks but that honeymoon seems to come to an end.
First symptom was that Messenger couldn't connect, and after a few days I uninstalled it and tried to re-install it. Well, the installer couldn't connect anywhere to get files and I decided to let it be.
Then I installed some new hardware and allowed Windows to connect somewhere to get the drivers (I don't usually do that, but with this hardware it has allways worked well) and it couldn't find anywhing this time. I just thought that 'well, windows, it's allways a different battle' and got the drivers from the hardware manufacturer.
Now I would really like to get the Messenger up and running again and tried to look at it again. I thought maybe I should do a windows update first and off I went. At this point I realized that the problem lies deeper than Live Essentials / Messenger. After just 1 or 2 seconds the update tells that some updates (=none) couldn't be installed + error code 8007273D which 'surprisingly'
From day 1 I've had Zonealarm and Avast! running, I've also tried with them turned on but no help.
I tried to install Win 7 Home Premium 64 bit on my brand new rig and I kept getting a "Windows could not configure one or more of your system components". I tried reformatting, changing the SATA to IDE and AHCPI, nothing worked, so I installed Home Premium x86. Being a 32 bit system it only recognizes 3.5gb of my 8gb Dual Channel DDR3 with 4.5gb being "system reserved hardware".
I am trying to move a .dll file from one of my folders in Downloads to Program Files (x86)/some_folder, but it keeps showing "you require permission from my_machine/Owner to make changes to this file", so I can't finish the job; I tried take owner ship of the dll file, but it didn't work.
Here is what I tried: First of all, I changed the own ship of the .dll file located in Download folder to my_machine/Owner(full control), and then i changed the own ship of program files(x86)/destination folder to my_machine/Owner(full control) as well; then tried to move the dll file to the destination, failed. Then I turned off the UAC, tried but failed again. The error msg is still "you require permission from my_machine/Owner to make changes to this file".
To start, a quote from Windows 7 EULA: Quote: ... 2. INSTALLATION AND USE RIGHTS. a. One Copy per Computer. You may install one copy of the software on one computer. That computer is the "licensed computer." ... As the older geeks certainly remember, in earlier Windows versions it was possible to use different hardware profiles. You simply got a boot menu asking which hardware profile to boot.In 7 this is not possible. You have to manually disable or enable the hardware components when the need arises.
What if I install all the software I need, activate Seven, then create a system image. Shut down the computer, disconnect the Windows 7 HD, attach an equal new HD, use recovery tools to return the said image to this HD number 2. Put HD 1 back, use BCEDIT or a third party tool to create a boot menu which at this point would include two absolutely identical Seven installations.Then strip down Seven setup #2, disable all unnecessary devices etc. thus creating a Seven - Seven dual boot environment, with two different HW-profiles. The computer is the same, only one of the two Sevens could be used at any given time, and so on
Windows could not configure one or more system components To install Windows, restart the computer and then restart the installation i get this message on clean windows 7 instal i formal my disk and custom instal from boot and on compliting instalation i get that error?
For my custom computer I want it to have all of the proper parts in front (power, reset, LEDS, USB, audio), and I found how to do the switched and LEDs, but not usb ports and audio jacks. where do I get these? I can dissect a USB hub and wire it to a header, but a premade solution would be better.also i'd like to install a SD (and maybe MicroSD) card reader without using a drive bay (and ideally using the same header as the usb ports).
I originally partitioned my Toshiba NB205-N210 for Windows XP, so I only gave the system partition 8GB.Recently I installed Windows 7 Ultimate (x86) and of course 8GB is too small for it to really work well. This is even if I have enabled "compress files" for C: and I've already removed everything from "Turn Windows features on or off".I have actually been able to run Windows Update and update everything, but now it wants to install Service Pack 1, and there's not enough room - I only have 300 MB left.When I was researching what I could delete to make more room, I came across a torrent called "Windows 7 Lite - Dark Netbook Edition". The creator wrote that he had removed these components:
- Projector Connectivity - Speech Support - Welcome Center - TV Tuner - NVIDIA & ATI Video Drivers
I recently created a virtual server of window 2008 x86 enterprise edition. I installed integrated components and configured my educational / testing server and things were working fine until I rebooted the host OS and everything seems peachy but after the OS splash screen something seems to be conflicting locking the OS preventing the user login screen to appear. I checked the bios and intel virtualization Is on in the bios and I can load into safemode so the issue must be caused from some conflict that isn't loaded in safemode. Has anyone run into this issue before and what line of thought did they use to fix the problem -posted from the smartphone of a tired programmer so please forgive any grammatical or spelling issue
I was importing 2 virtual machines from VirtualBox to Virtual PC, uninstalling the drivers on Windows 2000 provided by VirtualBox, importing that virtual machine to Virtual PC, installing the drivers provided by Virtual PC, but suddenly i got the following error: D:setup.exe is not a valid Win32 application.
I've been trying to update using the win7 updater to Sp1. I've beeen able to get it downloaded but the installation fails shortly into the process returning a message saying that it cant proceed due to missing components. I've tried one potential fix which is to restore backuped fies from my last usage of driver sweeper, but that did not work.