Sp1 Install Returns Error That Components Are Missing
Apr 11, 2011
I've been trying to update using the win7 updater to Sp1. I've beeen able to get it downloaded but the installation fails shortly into the process returning a message saying that it cant proceed due to missing components. I've tried one potential fix which is to restore backuped fies from my last usage of driver sweeper, but that did not work.
I was attempting to reinstall Windows 7 because it was getting slow, and I was almost finished and was on Completing Installation... phase I get an error saying that "Windows could not configure one or more system components" and then it started rolling back the system. I'm using Windows 7 Ultimate and I never had this problem before.
I am trying to share my MUSIC folder on my Windows Home Server (WHS) to my Music Library.
Pretty simply structure, so thought this should not be a problem. If I add the entire folder to the Library only 1/3 of my songs are listed. In trying to understand what is happening I found that only 2 of the 5 sub-folders under MUSIC are included (Songs1 and Songs5).
Starting over, I removed the "MUSIC" folder from the Library and then proceeded to add each sub-folder indivually. What I found is I could add 2 sub-folders (Songs1 and Songs5), but adding the other 3 sub-folders returned an error message, "this network location can't be included because it is not indexed". If I add any new folder under MUSIC I can't add it to the Library either.
I'm thinking this has to be some type of security or user issue but can't think of what it would be since some of the sub-folders under MUSIC can be recognized, while others, including new folders, can not be added. Anyone have any suggestions?
Windows could not configure one or more system components To install Windows, restart the computer and then restart the installation i get this message on clean windows 7 instal i formal my disk and custom instal from boot and on compliting instalation i get that error?
I was importing 2 virtual machines from VirtualBox to Virtual PC, uninstalling the drivers on Windows 2000 provided by VirtualBox, importing that virtual machine to Virtual PC, installing the drivers provided by Virtual PC, but suddenly i got the following error: D:setup.exe is not a valid Win32 application.
When I attempt to disable Windows fax and scan and internet printing client an error appears and all it says is that an error occured and no changes were made. It then prompts for a reboot as if something happened. I just did this install last week and finally have everything how I want it minus that. SP1 installed fine and no other issues. ic hecked the event viewer but see nothing in there when i try and disable the components.
I was doing some printing and it was fine. Right in the middle of a multiple page print job I got a printer error. Troubleshooter indicted a HP Photosmart C310 driver was missing. I went to Device Manager and every entry under Other Devices was missing their drivers. The C310 printer, the SM Bus Controller and the Ethernet Controller. Windows Update was unable to find and install any drivers. Why all the Other Device components lost their drivers at the same time?
I am performing a clean install of Windows 7 64bit Home Premium with SP1 integrated on a Dell Studio XPS 8100, and after the first reboot during installation, I get a message "Windows could not configure one or more system components. Windows installation cannot proceed. To install Windows, click "OK" to restart the computer, and then restart the installation." This is a 64 bit machine. Was running Windows 7 64bit Ultimate until yesterday.
Tried partitioning/cleaning/wiping the drives in so many ways I couldn't even count, including "clean all" from repair disk, booting to ubuntu live cd and making sure no rogue filesystems/partitions exist, letting windows installer create partitions, precreating the partitions in diskpart/ubuntu. Have tried several iso's and several cd's/usb drives.
Messed with some bios settings, but to no avail, and made sure my bios was up to date. Downloaded drivers from dell and loaded chipset drivers pre-installation just in case. Have removed all extraneous devices from system excepting the keyboard, mouse, HD, CD-drive, and video card. The 32bit version of Windows 7 Home Premium installed completely fine, with no issues whatsoever, even without pre-loading the chipset drivers.
System Specs: i7 870k 8GB 1333-MHz DDR3 Intel H57 Chipset Two regular old 7200 Western Digital drives GH50N CD-DVD Drive GTX 560ti
Yesterday I bought a new ASUS A55A laptop and was installing basic programs (Chrome, iTunes, Photoshop). I installed EASEUS partition manager and tried to resize the partitions. I tried because there was an error and now Windows will not boot.So.I read up on the subject: tried to active the ASUS recovery using F9, doesn't work. I opted to try and reinstall Windows using both an installation DVD and USB. Easy enough, just that I get prompted to look for the CD/DVD unit's driver.I've read various threads about it, but none of the things I've tried (different USB ports, downloading all sorts of drivers from the official ASUS page) seem to work.
I have had number of errors, the latest being 'Error number: 0x80070017' when trying to install windows 7. I'll start from the top. Originally I had problems exactly the same as on this thread below, incl same model PC except with Vista, also USB mouse often freezes or stops working: [URL]. I ignored the problem until crash during online streaming (assumed problem was to do with graphics card), usual multi coloured horizontal lines on monitor, repeating sound. Manual push button shutdown.
On restart, black screen no boot activity. Recovery DVD doesn't work/ don't have all the discs. So I bought Win 7 upgrade instead. Now I have a combination of 'BOOTMGR is missing', and when that doesn't occur PC freezes on any screen you can think of. Sometimes I can get all the way to 'expanding files' when installing Win 7, then I get Error number: 0x80070017. I have tried copying DVD to USB drive (in case it's a dvd drive speed problem), but then cannot copy the whole DVD usually there's an error stopping me (on another pc).
Also no OS available to select during repair system selection on Win 7 upgrade/install screens. Finally error regarding 'USB drive unplugged during boot' or something to that effect, also tells me DVD or CD or hard drive might no be connected properly. Had that message twice, again locks up. I've checked inside, every thing connected.
So to summarise: Bootmgr missing (on boot) Error number: 0x80070017 (on Win 7 install) No OS available to select (System repair) Constant freezing
whenever i try to install windows 7 from my usb it says cd/dvd device driver is missing after i click install now. how do i fix this? ive tried to mount the iso onto usb with different softwares and i redownloaded the iso in case the previous iso was corrupt wat else can i do?
I'm trying to install Windows 7 64bit. After loading windows 7 setup from my dvd drive I get the error "Required CD/DVD drive device driver is missing." From doing a lot of research, it seems this error has nothing to do with my DVD drive but has to do with the SATA Controller Driver. So I try to load the 64bit drivers for the SATA controller and it finds them okay but when i try to install, it says something like "no new devices found". The SATA Driver(s) are the only it ever finds, except for the time I enabled Raid... Then those drivers showed up as well but with the exact same results.
From another forum I was directed to this microsoft page: [URL] and the resolution says: "To workaround this issue, disable AHCI mode for your disk controller in the system BIOS. Typically the controller has to be changed from AHCI mode to "IDE" or "ATA" mode. "
My motherboard is an Asus P5N-E nForce 650i SLI Chipset LGA775 FSB1333 DDR2 Mainboard. However, I can not find anyway to change the setting from AHCI mode to IDE or ATA. As far as I can tell, nothing in my bios allows me to change that setting... or at best it's unapparent.
When attempting to install Windows 7 on my computer (it currently has Ubuntu Desktop 12.04 installed, and has no CD/DVD drive), I get the following error; Quote:A required CD/DVD drive device driver is missing. If you have a driver floppy disk, CD, DVD, or USB flash drive, please insert it now.Note: If the Windows installation media is in the CD/DVD drive, you can safely remove it for this step.I am installing it via a USB stick (copied the install files from my Windows 7 disk, due to the fact there is no CD/DVD drive). I've tried the common Internet solutions such as re-insert the USB stick, and try another USB port, none of the aforesaid have worked.
I've owned my custom computer for about 3 years now, done various upgrades on it. But now I don't understand what's happening. When I play Games or doing normal browsing, my computer will hang and everything will freeze for about a minute or two. It's more when I play Video games than when I surf the internet. It then returns to normal and I can do whatever for the next 10-15 minutes, and then it does it again. I tryed to get past it but it starts to do it more frequently.
I have a problem with 2 Windows computers located in 2 separate locations. When I login the computer will run for 1-3 minutes and then freezes for 8-20 minutes. After it returns from it's nap everything runs normally.
I have been told that their is no malware on the computer, see this topic --[URL]
when I first reported this on the Windows 7 forum about a month ago the freeze was 7-8 minutes, last time I rebooted and logged in it froze for 20 minutes.
I have a home network, based around a wireless router which our internet is distributed by. The connection is fine for internet but not great for file sharing.I take a lot of pictures and save them all on my desktop pc. This is sadly a windows machine running Windows 7. I have been using this for a good few years, it has an internal RAID5 array which I store the images on.I am not looking to access these files from my mac using a faster interface than the wireless which is already set up. My mac has a gigabyte ethernet port as does my desktop. I have purchased a crossover cable to save buying a switch.I have set up file sharing on the wireless network which work albiet very slowly by looking on the network on my mac, waiting till my windows machine appears, logging on using my normal credentials and having access to my files.
If I try and make the mac use the wired connection instead by going to the finder Go>Connect to a Server and then typing in 192.168.0.100 for example in searches for about a minute and then returns nothing. I can ping the machine and get a response.From what I can diagnose myself is that the unidentified crossover cable network is not liked by windows at all and won't allow sharing of files. This is just an inkling though.
Running Windows 7 (6.1, SP1, 64-bit).Previously, I was using WinXP file search in classic mode. Predictable, reliable results.I'm finding Windows 7 file searching to be unpredictable at best.I have dozens files of the form xName-<date>, where x is my first initial,Name is my last name, and <date> is the file date (e.g. - "mSmithCV-7jan09.doc").When I use the Windows 7 search to find "name:smith", no files are returned.Nor will "name:*smith*" return any files.The search does return the files if I specify "name:mSmith" (i.e. - the beginning of the filename),but I have no confidence that the search is returning ALL of the files.
Is there a classic search mode? Or a simple, cost-effective third-party file search utility? Or even a way to get Windows 7 to find all files whose filename contains (but does not begin with) a specified string?[I find Windows 7 to be better than XP in most respects, but I really can't believe that this search functionality made it out the door.
Recently purchased an Acer 5733. Why will my new higher zoom setting not remain as such, until I wish to reset. It seems erratic from one web page to another, and often automatically returns to 100%. Sometimes when I return to previous viewed web pages, the higher setting will have remained. If I set at 125% I want it to stay there!!
Every time I use the command Ctrl+C to copy. My Windows aero colour scheme returns to default colors. The only way to change it back is to hit Ctrl+C 10 more times!!! This seems to be an odd issue but its really annoying as I copy and paste allot XD.
When trying to run ipconfig using the cmd it returns nothing. Also, when downloading large files my internet will stop working and then start working after a while. OS is Windows 7 Ultimate x64?
I have already reported to Sony to but i heard their take their time but thats the one thing what i dont have at the moment so i know many people here know about that stuff to. So anyway. Some time ago SP1 launched for Windows 7. I installed but it but something went it wrong and it didn't install correcly and then i was forced to use System restore. Everything worked and i haven't used SP1 because i don't want to risk screwing up my computer before some important things, i got plenty of time later for that . The problem is after the system restore every time Vegas launches i get a error : Sony Vegas pro 10 an error occurred starting Vegas Pro Error 0x80070002 (message missing).
Used RT Seven Lite to slim down windows, but may have done a little too much in terms of removing Windows services (RasMan, etc.). Is there a way to reinstall the Windows components?I did try to manually create the services using sc create and trying to duplicate the service from another box, but so far it hasn't worked out that well
I've found this guide Windows 7 Installation - Transfer to a New Computer for changing all my components except HDD.My question is, I currently use my install as an HTPC. If I use the sysprep method, will the codecs (ffdshow etc) work correctly afterwards, or will I have to go through installing them all again?I understand graphics drivers will need re-installing.