I have an XP laptop and a Windows7 desktop. I wanted to reinstall xp on the laptop and did the mistake of using WET to transfer files to a stick as an MIG file only later to discover that xp doesn't recognize this file. Windows7 recognizes this file. But if I double click on this file it immediately starts copying the files (at least it displays this message and starts spinning). I then cancelled the action as I didn't want to extract into my Windows7 desktop. How can I extract the files into a separate folder so I can then take them to the laptop and transfer.
I am running OS Windows 7 Pro 64bit in my PC. I keep on having a corrupt file whenever I extract RAR files especially larger files. Almost all larger RAR (more than 3GB) will have this problem. So far smaller RAR I have no issue. I have tried extracting the same under different PC (OS Win XP) but without any issue. Which I believe not the RAR files been corrupted by itself. The corrupt files seems to be random.. Sometimes, I manage successful extraction, but sometimes I don't. I have the same problems even after clean installation. I have run memtest without any error. I am using 6gb ram
I have an Asus Essentio desktop and it didnt come with any Win7 discs. Is there anyway to extract Win7 and burn to a disc? I only ask because I want to rebuild my PC and wanted a fresh install without all the other software that came on my PC.
i forgot my windows 7 password and never created a recovery disk didnt know u had to well until it was to late and my hint isnt helping me what was the point of hints when they dont remind u anyway how can i get into windows to reset or system restore without a recovery disk?
I used to have win 7 x64 and I was having a problem with corrupt archives and not being able to extract with winrar etc. I switched to x86 for about a year. Being out of site out of mind type thing I wanted to get the best of my 6 gigs of ram I could and I reinstalled windows 7 x64. I'm having the same problem again.. Corrupt archives, damaged files etc. I'm 100% sure these downloads that I normally do (video games) archives are not corrupt and would be working perfectly in x86.
Apart from moving my profile to another disk, what can i do to prevent my mouse getting slow while some bigger setup or file extraction is running? Change location of TEMP files folder to another drive - Microsoft Community
I have an enigma with my PC. When i try to extract big files, copy, or install (games or anything) my pc becomes irresponsive and generally very SLOW. For sometimes I even cannot browse on internet, because firefox becomes very unstable.Recently i bought Assasin's creed brotherhood and while i was installing my pc was almost usseless. After installation i started the game and it was NOT playable, even the menu was usseless (cursor was very laggy, and impossible to control, and everything worked maybe at 2-3Fps)Strange thing is when i start task manager (c-a-d) my cpu ussage is at max 25% and memory at 55 max)notice that I can play assasin's creed 2 all maxed at 1920x1080.
Intel Core 2 Quad 6700 (2,66GHz) ASUS P5P43TD Motherboard 2GB DDR3 1333Mhz Seagate Baracuda 160GB (system) and WD Caviar 320GB (storrage) Saphire Ati Radeon 5770 1GB
Trying to figure out why everything I have tried to download is unsuccessful because there are plug-ins missing or else they need extracting and I can't figure out how the heck to do the extraction thing and it is seriously stressing me because I got stuff I need to do and all I'm doing is spending time trying to get the software i need to do my "stuff" but I can't because they all need extracting.Used to be you just downloaded something and it installed and that was that. How the heck did I end up with this program thing that has tools including extraction and lists all the sub files? Where did it come from? it doen't say what it is so i tried to get a screenshot of it and attach it here but the attachment wouldn't work and so then I lost all what I typed looking for that and now I'm back retyping and i'm being technologically challenged and up until today I never though maybe I have alzheimers because i'm getting nowhere?
When trying to install the Firefox 4 beta, the self extracting archive (Firefox Setup 4.0 Beta 12.exe) won't install. It would extract the archive into the temp folder, but the setup won't activate. I looked into my C:UsersDawnAppDataLocalTemp folder while the archive was extracting, and after finishing, the temp folder just auto-deleted.
I got me a new 1TB HD and Windows 7 Pro 64 bit (not USB install, actual new DVD. I was trying to install it. The initial parts were painfully slow but they worked.I got to the part where it Copies Files. Then it goes to Extracting Files and it stayed at 0% for about an hour (before I gave up). I could still move the mouse and I clicked on cancel (and then it did very little again).
I am trying to extract the files from Sysinternals Suite to my command directory in the System 32 file. However, WinRAR keeps giving me the diagnostic message "Cannot create blah.exe Access is denied". And I am running as the administrator. Is there any work around to this?
I have backed up all the files and emails from a faulty hard drive before inserting a new one and setting up Windows on it. However, because the drive was in such a bad way, I did't run Outlook to extract the email account settings - and now realise that these are hidden in the registry. I have tried importing the registry files (after doing some research on this), but cannot find the registry section which contains it.
Now that the the new drive is fully running (apart from the email account settings) - Windows Vista upgraded to Windows 7 - would it be too risky to re-insert the drive in the laptop to run Outlook and get the settings recorded ? I am concerned that it will cause error messages when I re-insert the brand new drive. I have thought about booting up a computer from the faulty drive, but think it may refuse to load because it's a different PC to one it came out of (Dell XPS M1530) - is this the case ?
I have what I thought should be a relatively straightforward question: What do I type in the command prompt in Windows 7 to extract all the files from inside an .exe? I remember doing it once a long while back, but I forgot how and Google is being especially unhelpful.One result instructed me to navigate to the file's location and type:
filename.exe /A /P C:destinationfolder
but that didn't work. I assumed it was for an older Windows version. Google got its hit from a comment saying it didn't work on Windows 7...
I have an SSD as my OS drive and HDD as a storage drive. If I setup any program to save downloaded files to my storage HDD (specifically the program Newsleecher for Usenet downloading) and allowing it to extract the downloaded rar files into the same storage HDD, would the files still "go through" the SSD before finally saving/extracting to the HDD?
Computer management -> Disk management -> attach VHD The VHD attaches fine, and it is the correct file. But when it attaches I get the message: "you need to format the disk in drive F: before you can use it. Do you want to format it?" I clicked cancel, and then tried to right click -> explore. I then got the message: "F: is not accessible. The file or directory is corrupted and unreadable."Out of all the tutorials I have read, the file should open just fine and let me explore it. Why is it asking me to format the disk? And is it safe to do so?The file system is listed as "RAW" and the status is "Healthy(primary partition)"I don't want to lose everything on the system image! Can I/should I format the disk?
I installed Win 7 and if i try to open my computer of click on desktop and open up screen resolution etc. I get "Explorer.exe -Windows cannot access the specified device, path or file. You may not have the appropriate permissions to access the item." I did a search but could not find anything related to this error in Win 7. I have found some others attached to Win XP but have to do with the installation of some software which prevents access to explorer.exe. When I boot in safe mode this issue does not appear...
I am running Windows 7 32-bit. I have a perl script which i want to start everytime computer starts. Setting it as service will be a good option as i can start and restart the service from command line.In windows XP I was using srvany.exe but that is not a good solution. Is there any way I can make this Perl Script which takes in some command line arguments as windows service. Tried using sc.exe, with that service is created but it fails to start.To run that perl script i run on command line:Quote: perl PesrSclipt.pl --arg1 Hello --arg2 Buddy --arg3 Good
whenever I open docx file there is hidden file ~$name of file.docx created. which type of file is that? Is it in virus, maleware. for example If I open house.docx file then ~$house.docx file created which is hidden form. I had saw this file when i select show all hidden file option. when i try to open ~$house.docx file it show message the file is corrupted and cannot be open.
I'm on a network where I keep my files but I'm very aware of whether or not these might be open elsewhere. From time to time at any old time of the day (randomly it seems in other words) I'll go in and try to arrange, rename, or get rid of files and I'll get "The action can't be completed because the file is open in Windows Explorer. Close file and try again". Except that the file ISN'T open anywhere.
After doing a copy and paste, we have, on 3 occasions so far, found the copied data in an entirely different file. Twice data from a copy appeared in an excel spreadsheet and once a picture copied in facebook appeared in an email. The excel problem is very worrysome as it is our family budget. how this could happen? In the case of the excel events no paste operation was intentionally done.
How to create a batch file that will move files based on the file type?My Requirement : I need a batch file to copy all .doc files in all my HardDisk to aremovable disk say (Z: drive) . Can anyone make it possible using a batch file
How to force Windows 7 File Explorer to display ALL audio folder content as normal files in detailed view with file name/size/date and without title/artist/album.
Whenever i take a file and put it onto the my desktop, all the permissions to the file is completely stripped. Leaving none able to open the file.I am able to go into access control and add myself again, but it makes no sense at all..