Doesn't Make A Difference Whether New Drive Is Connected Or Disconnected

Mar 4, 2012

no it doesnt make a difference whether the new drive is connected or disconnected , same problem

View 1 Replies


ADVERTISEMENT

Will It Make Difference To Make Partition At Beginning Or End Of HDD

Jul 11, 2012

I have two hdds (500gb 7200rpm) in my laptop and have 260gb of data on the second one. I wanted to create a partition for games at the beggining of the 2nd drive (the left side) as i heard it increased performance to put games in anoher drive and at the beggining of the drive.Will it make difference to make a partition at the beginning or at the end of this drive when it comes to gaming performance?My cousin showed me one game in the same drive installed in the 1st of four partitions of a 500gb 7200rpm (the same i have) performing with 3-5 fps more than that game installed in the 4th partition of that same drive....

View 9 Replies View Related

IPhone Network Location Doesn't Save When Disconnected

Oct 21, 2011

I have an iPhone 4 which has internet tethering. I can either connect this via the USB cable or wirelessly via my intel 6300N wifi card.

When I connect to my laptop via USB cable, the 'Set Network Location' box comes up, which I select Home Network. It is simply named 'Network', but I then go in and change 'Network' to 'iPhone'. This then shows up in the Network and Sharing Centre as iPhone on a Home Network. This works perfectly, is super fast and when I'm finished, I disconnect the USB and shut down.

When I next turn on my laptop and connect my iPhone internet tether via USB cable, I am once again asked to ''Select a location for the 'Network' network''. Windows 7 netwkr and Sharing centre isn't recognising the same iPhone is connected and asks me to set up a home network again.

I've gone into 'Merge or delete network locations' and the original 'iPhone home network' is set up (not in use) as well as the new 'Network' location that it's asking me to set up. If I merge the second 'Network' and original 'iPhone network', this removes the second network and I'm left with the 'iPhone Home network (in use).

If I disconnect the iPhone and reconnect, it asks me each time to select a network location for the 'network' network. If I don't merge them, I end up with Network 2, Network 3, Network 4 etc all the while still having the original iPhone network not in use as well as any other not merged or deleted.

Why won't it recognise the same iPhone as being connected and selecting the iphone home network that I set up and why does it keep asking me to create a new one whenever I connect?

This never happened before, with my laptop previously recognising the iPhone home network I originally created ages ago. There has been no significant updates or changes that I'm aware of, except that I updated my iPhone software, bt this has been done in the past numerous times with previous iPhone updates and hasn't happened before.

I have a Virgin wireless broadband usb modem, which the system recognises each time I connect it. It's only the iPhone connection that's not saving. The iPhone network is 'unmanaged' but so is the Virgin Broadband USB.

I have a Pioneer Dreambook P170HMx running Windows 7pro x64. If there's any other details you need, I'm happy to supply them. All I want is my system to save the network configuration and recognise when I connect the iPhone tethering that it's an already created iPhone Home Network.

View 9 Replies View Related

Is Adding Extra RAM Going To Make Any Difference To Performance

Aug 10, 2011

I'm looking for performance for graphics editing - high res and large files, 200MB files are not unusual - and do a lot of design and publishing work, sometimes on large and complex documents. Occasionally I'm working with video from phones but might get more into HD video in the future.Current machine does what I need quite happily - Windows 7 x64, 6GB (DDR3 10600) RAM, ASUS Sabretooth X58. I've got an opportunity to add some more RAM - another 12GB - for not much money. Might do it just to see what happens - but am I going to notice any difference at all? Are there any clever things that I (or the OS) can do with a surplus of RAM? Or will it just use more power?

View 38 Replies View Related

Disk Management - Chg Drive Letter-disconnected Drive

Jun 18, 2009

My backup software's profile database is expecting to backup to H:, which was the drive letter for my external backup drive back in XP. This drive comes up in Windows 7 as K, because Windows 7 has given my four usb card reader drives the letters F,G,H,I.

Disk Management will not show these four card reader drives unless media is inserted (connected vs. disconnected). I have changed the letters for F,G,I to T,U,W, but only because I have those types of cards (SD, CF, MS)...I do not have an XD or SmartMedia card for the one dang drive I really need to change.

What are my options, other than buying the cheapest SM card I can find to make the drive visible for this task? The SmartSyncPro database has many profiles, so remapping all those to point to K would be a major hassle.

View 2 Replies View Related

How To Remove Disconnected Network Drive

Mar 8, 2011

In windows 7 , i can't disconnect my network mapped path. when i tried to disconnect , it gives an alert "network connection does not exists". even i tried to connect i can't create for the same drive.

View 3 Replies View Related

Blue Screen If Optical Drive Disconnected?

Mar 26, 2011

I have just built a system running:Asus p8p67 motherboardIntel i5 2500kAti 6850 graphics carWindows 7 ultimate x648gb ddr3 1333My issue is, after removing my sata optical drive, the computer blue screens at windows loading screen and restarts. If I connect the optical drive back in, everything works fine.I have tested this several times and its always the same scenario.Both my sata3 hdd and normal sata optical drive are connected to the 6G/b ports on the motherboard.I have installed the latest videocard drivers and all my mboard drivers are installed

View 1 Replies View Related

Laptop Is Connected To WiFi But The Internet Doesn't Seem To Work

Jan 14, 2013

My laptop is connected to Wi-Fi but the internet doesn't seem to work. It shows "No Internet Access". the same network is working fine on other systems.

View 3 Replies View Related

Computer Doesn't Find Microphone - Headset Not Staying Connected

Jan 30, 2012

We have this headset. In the sound menu, it says not connected, while I did put it in the computer? (And I didn't put them the wrong way around, and have checked all my drivers.)

View 3 Replies View Related

How To Make Ssd Boot Drive To Make System Scream

Nov 29, 2012

I wanted to use my 180gb ssd as a boot drive and I do not know what to do. I installed windows and some drivers on the hdd but i want to start over and I need some guidance.I am doing a clean install now. once thats done how do i make the ssd the boot drive to make my system scream! also will i need to put drivers on both hdd and ssd?

View 5 Replies View Related

Computer Doesn't Make It To Desktop?

Jan 2, 2012

When I try to start my toshiba satellite L455D-S5976, it gives me the option between "start normally" or "system repair." When I chose "start normally," it shows the windows boot screen for a while, then restarts to the toshiba start screen, and the same menu again. If I chose "system repair," it shows an older type of windows boot screen, says something to the effect of "loading files" the the screen goes black, and the cursor comes up, and can be moved. I have left it on this blank screen for hours, and nothing has happened.

View 7 Replies View Related

Difference Between Homegroup And Mapping Network Drive?

Mar 12, 2009

Is it just Libraries and Public and Personal sections? How are those different than mapping a new drive and setting permissions and/or passwords accordingly?

View 6 Replies View Related

Difference Between Sleep And Shut Hard Drive Down?

Jan 29, 2013

i was wondering what the difference was between putting a computer to sleep and having a hard drive shut down (through power options).

View 3 Replies View Related

Windows ISO To USB Conversion Tool Doesn't Make The USB Bootable

Oct 19, 2012

I tried to use the tool windows provided to make it so you can put a ISO copy of windows on a USB...and it didn't make it bootable.

View 8 Replies View Related

Make My Laptop Startup Without Showing Error When It Doesn't Prop?

Jan 20, 2012

Want to know if their is anyway to make my laptop startup w/o showing error when it doesnt properly shutdown.My keyboard shorted out,wiggled the ribbon & the connector came off the motherboard.I have no usb keyboards.So if i don't shut down properly,it shows the error message with options.Usually startup repair is highlighted by default.And since I have no keyboard to change the option,it starts that automatically after countdown & I can't cancel it.

It's very irritating.I just been using the on screen keyboard,I actually don't mind that.I know just shutting it down properly will fix this.But their is times where I lose power to laptop sometimes.Im not a noob,I normally leave my laptop plugged up w/o battery when I use it.Sometimes the plug comes out(dogs knock it out etc.).I know most laptops are supposed to stop sending a charge to batt once it's 100%.But I think it's bs & don't trust it.My preference & opinion

View 3 Replies View Related

Massive Difference Between Between An External Hardrive And A Desktop Hard Drive?

May 14, 2011

I'm looking at getting an external storage device to store my files on, and I can't decide what to get.Is there a massive difference between between an external hardrive, and a Desktop hard drive? These are the ones I can't decide from..Western Digital 1TB Elements External Hard Drive | Littlewoods.com..Is there much difference between the two? Which one would suit me better? I'm running a samsung rv510 laptop.

View 4 Replies View Related

External Hard Drive Not Connected?

May 3, 2011

Running Win 7 home, acer 1800.About a week ago I installed a Buffalo 1.5 TB external drive and automatic back up package, it was working very well, however it now shows as " Not Connected".I have replaced the usb lead but no change in status.It is also no showing up with other drives?Any one had this problem and found a fix?I did a search but found nothing quite like this.

View 2 Replies View Related

External USB Drive Not Being Seen When Connected To Motherboard

Jan 16, 2013

I am using an external USB combo drive, now I decided to take out the drives and have them permanently plugged inside my system through sata. None of the hard drives are seen in the bios or windows 7 x64 yet when I plug them into my usb combo external they show straight away. I know it cant be a setting as I already have a couple of sata drives internally that work fine. Why are these two drives that have been sat in a usb external not being seen at all when plugged internally on the motherboard?

View 2 Replies View Related

USB Flash Drive Connected But Not Accessible

Jan 7, 2012

After installing windows 7 professional, I cannot access my USB pendrive when connected it says E: is not accessible.

View 1 Replies View Related

External Hard Drive Not Detected When Connected To PC

Oct 6, 2011

I recently purchased an Iomega 1TB external hard drive to back up my files from my Laptop (Toshiba satellite) because it has been constantly showing hard drive failure warnings and messages telling me to back up my files. When I connected the hard drive the first time, it worked fine and I was able to access it, but didn't use it for anything at the time. The next time I used it, however, the usual "New device" sound didn't play and the hard drive didn't show up in the file browser. I then looked up the issue to find that it is a common problem where the device hasn't been assigned a drive letter. I went to the Disk Manager to fix the issue but the device was not in the list of connected devices.The problem seems to be with my computer because it works fine on my brother's computer and has no issues.Additionally, I have been having problems with Windows Update being stuck on "Downloading 0%" and have had to use the system restore several times when getting stuck on an update message on startup. I think that this may be the cause of the problem (and yes, I have turned on the hard drive).

View 9 Replies View Related

Getting XP Mode Apps To Treat Usb Drive As Connected

Oct 14, 2009

I recently installed windows xp mode on my windows 7 installation. I also often use acronis true image 9.1 to image disks. I have a USB connected SATA drive bay that I use for imaging the drives, and I am wondering if there is a way to configure it automatically treat that device as connected instead of shared. I would like to be able to launch the app from my desktop instead of having to start the virtual PC every time. Any thoughts?

View 3 Replies View Related

Detecting Hard Drive Thats No Longer Connected?

Nov 27, 2011

I recently built a new computer and connected my old hard drive to copy files across to my new one. Both drives had Windows 7 installed and while staring up I had to select one to boot from. I have since removed my old hard drive but am still asked to select one to boot from even though there is now only one connected. How do I remove my old hard drive so that it will automatically boot from the new one?

View 8 Replies View Related

WD Drive Connected To Router Not Showing On Network

Dec 29, 2011

WD drive conected to router, doesn't show on network. Link light on drive & router lit. What I miss?

View 1 Replies View Related

Windows 7 Doesn't Assign Drive Letter With 2nd Western Dig Elements Drive

Apr 25, 2011

I have Win 7 home premium on an HP laptop with 4 usb ports. I have 2 Western Digital Elements 1.5 TB drives for backups. If I plug in one of the drives, Win assigns a drive letter, but if I add the second one it doesn't.

To troubleshoot, I've plugged each drive into every usb port on the laptop, and each port reads each drive alone, but if I plug in the second drive while the first is still in, it shoes up in devices but does not get a drive letter. I tried assigning a different drive letter to the device plugged in first, but Win still doesn't assign a letter to the second drive.

View 1 Replies View Related

DVD Optical Drive Appears As CD Drive And Doesn't React To Any Disc

Mar 7, 2012

My DVD optical drive appears as CD drive and doesn't react to any disc. The latest driver is installed.

View 5 Replies View Related

How To Make A Drive Primary Drive For Downloads

May 13, 2012

a friend is trying to download a big file from an ftp program to his pc, unfortunately it keeps downloading to his 30G partition that only has windows on it instead of the 1TB drive he's designated for download. The question is, how can he ensure that windows will download ftp files to his 1TB with plenty of room instead of downloading it to his Windows 7 partition drive? He says that Windows creates a ghost temp file of what he's downloading on the 30G and thats why he's having this issue..

View 1 Replies View Related

Installing Windows 7 To An External USB2 Connected Drive?

May 28, 2011

Not from, but to. It's do-able I know, but would it just utterly kill performance?

View 7 Replies View Related

Toshiba Laptop Connected Wireless / Keeps Showing Connected However No Internet Access

Feb 22, 2011

i have a brand new toshiba laptop connected wirelessly. however it keeps showing connected however no internet access.i have a notebook as well that is brand new and it connects no problems what so ever.im using windows 7 home premium and 64 bit os.

View 1 Replies View Related

CD Drive Wont Open, Drive Doesn't Respond?

Dec 25, 2012

My Windows 7 Dell Studio 1550 laptop computers disc drive has been acting up for a little while now, like having to insert a DVD twice before it starts to autoplay with Windows Media Player (WMP). Just little things like that. Now when I try to play my audiobook I got today and it isn't recognized by WMP. When the look in Windows Explorer the files it contains are garbage- default style files of size 1kb with default track names like: Track01, Track02....Thinking that it could be that the CD might be readable on normal car CD players and similar, I double check with an old CD that I burnt myself a couple weeks ago. It doesn't recognize that either and it Win Explorer displays the same garbage.WM Player does literally nothing when it is told to play to it, and VLC tells me that:"Your input can't be opened: In desperation I try the original CD in my gaming tower. It plays but now it refuses to eject the disk. It has a LG MODISC CD/DVD-RW with Lightscribe in it.

View 1 Replies View Related

Seagate Laptop Hard-disk Drive Connected To A Usb Port?

Jun 23, 2011

i am trying to connect my internal harddrive for my dead laptop via a usb port of a working one, but i get the message that the device is not recognized

View 1 Replies View Related

Unable To Boot From Laptop Hard Drive Connected Through USB SATA Cable

Mar 4, 2012

I have a Dell Inspiron 1545 laptop. I recently developed hard drive trouble and have had to order a replacement.Instead of installing Windows 7 all over again, with all the drivers, etc., I want to clone my existing hard drive to the new one.I intend to connect one of the hard drives to my system via a USB SATA cable with the other drive connected inside my system.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved