I could not install winxp or win 7 before hand because I had wiped the drive completely. I've tried formatting and all the tutorials on the internet and nothing until I just now tried Clean All. I'm wanting to go about this the right way before I throw it out the windows.Steps to take after a clean all command?I'm using a usb to install because my optical drive is a no go. Can I call my dir for bootsect from the usb? Please note that I can not repair my MBR, I have tried using Gparted, Windows XP wouldn't install to the HDD nor Windows 7.
I have a new sata3 SSD drive on which I want to install Windows 7. The PC has an existing build of Windows 7 on a different disc which i want to reformat & use for data. I tried this previously and ended up with a dual booting system. Trying to remove the old Windows 7 installation and format that disc created much trouble so now I'm starting again, how to: Install Windows 7 on the new SSD disc (I'm assuming this will work ok as I've done it before), Have the system recognise only the new Windows 7 installation at boot & not the old Windows 7 installation so I don't have to select which OS to use, Reformat the old Windows 7 disc and remove any boot references that it might hold.
WHAT IS THE BEST WAY TO CREATE Windows 7 INSTALLATION DRIVE?? i know there are many softwares and techniques out there in creating usb installation drives ,i have tried many but none seem to work
I have a Lenovo Y560p 64-bit i7 machine sold without a recovery or re-installation Win 7 disk. It has a so-called OneKey Recovery button which will in theory recover or re-install Windows 7 from the O/S info stored on a special HD partition. But I would like a DVD-Rom that boots the computer and does a re-installation of Win 7 should Windows break down. How do I create such a disk?
I installed Windows 7 on a formerly Vista Business computer. Now I would like to know, does a clean installation of Windows 7 automatically create a recovery partition or backup? Or do I need to format the Recovery Drive D(from the Vista installation) and make a backup on that drive (D)?
I wasn't to create a Windows 7 installation disk that does not have ANY of my old files on it. I'm going to install Windows 7 on another computer other than mine. (And yes I have another license key) Is there any part on my hard drive that contains just the installation files?
I am getting a error during reinstallation of win 7 which is "setup was unable to create a new system partition or locate an existing system partition. See the setup log files for more information." I have win7 DVD for install. I have Dell xps studio 435MT/9100 desktop. I have 2 hard drives(640gb) each.
previously i have windows xp on my lappy. then i removed it and installed windows 7. but it wasnt restart. then with the help of windows recovery somehow i restared. but some of the drivers are not installing, and showing that system doesnot meet minimum requirments. then i tryed to find the problem. i observed that system reserved partition was not created. so i reinstalled windows.
How do I create a reinstallation disc for W-7 which was preinstalled on my Lenovo computer? Note: this would be in case my hard drive fails so that I can reinstall W-7 on a new hard drive. My first computer came with the disc (Win-ME). My second computer had a procedure where I was prompted to create/burn a disc of W-XP when I first started the computer. This time - nothing. I contacted Lenovo and they said I would have to pay $40 for such a disc!! Isn't there some way I can do this myself for free? I asked Lenovo about creating a System Image disc but they said it wouldn't work because I couldn't boot from it. (Note: the computer did come with a CD which has the drivers on it).
i am installing from hard drive .it worked for me 2 months back when i installed trial version of windows 7 .but now it doesn't .i have repeatedly tried but it says the same cannot create a temp folder
when i try to install windows 7 it says invalid pif file.i checked for the pif files extensions autoexec.nt and config.nt in windowssystem32 and i indeed found them. is there any way to solve this problem? please reply.
Not exactly sure how to explain or even exactly what im looking for but basically I had an older laptop running windows 7 home premium that allowed me from the boot menu to re install windows & home premium w/o key or anything. It was placed on a partition of my hard drive. I would like to do this again but im not sure what exactly im looking for or how to search for it in shorter terms. It was an MSI Intel duel core laptop. I would like to put it on my toshiba quad core. Im familiar with partitioning software and image restoration but not sure what exactly i should be looking for to do this. Just a clean Reinstallation of my OS without needing keys i dont care to back up any information except my os which is a clean install. Update Toshiba has this HDD recovery but i am not sure if this is what i need/want. MSI had a MSI recovery which did what i want. Is this the same/similar?
I have my HP Laptop which came with Windows Vista as the OS. I want to upgrade to Windows 7 so I bought Windows 7 from my local store.I entered the disc and did boot from CD. It reached to the page where it shows the disk partition. I deleted the partitions and created new one. However, whenever I create the partition, it creates a primary one and gives me saying Setup was unable to create a new system partition or locate an existing system partition.The stupidity that I did was deleted the partition which had the Recovery Drive in it. So, now I am stuck and not able to install Vista as well as Windows 7. I am not able to boot Windows as there is no OS in my laptop now.
I have my HP Laptop which came with Windows Vista as the OS. I want to upgrade to Windows 7 so I bought Windows 7 from my local store.I entered the disc and did boot from CD. It reached to the page where it shows the disk partition. I deleted the partitions and created new one. However, whenever I create the partition, it creates a primary one and gives me error saying Setup was unable to create a new system partition or locate an existing system partition.
I have just got Windows 7 Ultimate.I accept the Licence Agreement, set my partitions as i want them but when it gets to the expanding files part it will hang at 0%. This happens on both the 32 & 64 bit disc.This is a brand new purchase which I opened it about an hour ago.The laptop has a 400GB HD and 2GB of ram. It came with Home Prem x64 pre-installed, So the hardware meets the requirements.What seems to be the problem?
I just bought a new hard drive and a brand new Windows 7 Home Premium 64bit disc and I am doing a clean install on the new hard drive. it seems that everything is going normal, but at a random time during the installation, the computer just shuts off.sometimes it doesn't even get to the installation when it shuts off. sometimes it shuts off in the middle of the "windows is loading files..." black screen. there are no beeps when it shuts off or when I turn it back on. there are also no error codes.whenever i turn it back on it simply acts as if it never tried to install windows and starts the boot all over from the disc
So i have a new SSD Corsair Force 3 240 gig and all I want to do is install Windows 7 Pro on it. This board does not support parted magic (cannot wake from sleep and there are no onboard video to wake up to) so ive resorted to clean all.I have not been able to successfully boot the OS on the SSD. I never intended on setting up raid but apparently all the literature i see is on raid. I created a USB install disk as reccomended onto a 8gig ntfs primary active did the bootsect /nt60 X: and it successfully worked copied the cd over to the flash drive and copied the rste drivers in a folder called drivers My SSD is installed on port 1 6gig sata intel (as this board doesnt have marvel apparrently) My DVD is installed on 3gig Sata port 6 I set up Raid in the bios as reccomended by others (as this is the only way to install ssd?).
Nothing UEFI is enabled There are no other drives hooked up to the computer. Just SSD, USB cordless mouse, keyboard and no network cord or WIFI i started with a clean ssd as reccomended my bios recognized the ssd on post i booted into the win 7 install (MBR not uefi) i loaded the 64 bit rste drivers from asus as reccomended by others i left the machine to install the usb then booted into windows install (for whatever reason) i pushed f8 to boot my corsair windows brings up an error on a black screen File: windows/system32/drivers/adpahci.sys driver did not load Status: oxc0000221 Info: Windows Failed to load because of a critical system driver is missing or corrupt
1. How to download in Windows 7 from Internet to a DVD to create an ISO image? 2. If the ISO image is larger than the full capacity of one DVD how do I create the full image? 3. Once I create the full image on one (or more) DVD , how do I transfer the ISO image to another HDD? 4. Can I create an ISO image directly on a 2nd HDD? 5. Can I create an ISO image of the Windows 7 OS on a second HDD? I have tried to create an ISO image for a few months and i haven not been able to do it. Special note: 6. How could I copy the Win 7 OS into an ISO image on one or more DVDs? 6.1 What size is Windows 7 Home Premium OS? 6.2 Which partition does Windows 7 store the OS in?a. "Recovery" ? b. FAT32 ? how to create the ISO image, how to install it, and how to make sure that the "image" could be used to fo make a backup of my HDDs and also how to use the backup to fix the computer should a fatal crash prevented from booting up Windows 7? IMPORTANT: I use only DVDs, mostly re-writables. Which is the best free Image Burn Software that does work with DVD's.(as I dont use CD's anymore)
I am installing Windows 7 (Custom installation initiated from Windows XP) but I get the following error message when the installation is on the "Installing updates" step of the installation:
"Setup cannot continue due to a corrupted installation file. Contact the vendor of your Windows installation disc or your system administrator for assistance."
Do you have any idea what the problem may be with the installation? Is there a way to see what file that may be corrupted?
I have tried to burn the DVD in low speed, but the error appears anyway. I have a MSI K8T Neo2-Fir mainboard and the Windows 7 upgrade advisor application says that my hardware is okay for upgrading.
First, my laptop is a Aspire 5250-BZ853. I received it back in October, I think...may've been earlier. But anyhow, it was working just fine yesterday until I did a Windows Update. I had to restart, and it was fine again. But then it began running sluggishly slow, and just terrible overall so I restarted it once more and that was when the problems began.
This entire day, this has been driving me nuts. I have important files on here, and I backed up most on my external harddrive a bit ago but there were a few I missed and hadn't the chance to get (ironically enough the most important, papers and such.) At first, it said my password was wrong -- as if someone had changed it! I restarted it once more, thinking it an error or something, and did that again so I restarted it again. Finally, it worked but I think it logged me in as safe mode somehow. After that, it restarted on its own and began this loop. I did a LOT of searching on Google until finally someone suggested to someone else to try pressing "ALT + F10" I think it was as it was starting, and finally I made progress. Before that, it was just going into a constant rebooting loop and I couldn't even log into safe mode. Trying to reset it back to a time it was working was futile, because it said there was no recovery time there! So that shot that idea down. At last, I got somewhere.as well. I clicked the reset to factory settings, but still keep all the files (and they would be saved to "C:Backup" and I thought it had finally worked. But now as it reinstalls, I got an error saying something about how it needed to restart or something...so when I clicked "okay" it began again, and finally it all just came to a stop on "Windows could not complete the installation. To install Windows on this computer, restart the installation."
is there a way i can back up my PC and have it in an iso format? I have looked at acronis but it give me an .tib. I want to create and ISO of my whole PC to an external nas.
I have a USB Drive that I can use to install Windows 7. I would like to know how to put the Windows 7 Installation files that are on my USB on to a DVD so, I could boot to the DVD and install Windows 7.
I have a number of rss feeds of shops that I buy from on a regular base, and have placed them on my favorites bar. When a particular shop lists a new item the name shows up bold, after I clicked on the new item in the list that drops down and load that page, the name of the feed goes back to normal.
I've done it 100 times so you'd almost expect I would remember... NOT.
One of the feeds didn't seem to work anymore. When new items were listed, the feed name didn't change to bold. So i removed the rss feed from my favorites bar, and deleted it in the favorites list.
I tried to make a new rss feed by going to the shops website, click on the rss feed logo in Windows 'Tools'. That brings me to a rss feed but I cannot click on 'subscribe' anywhere, so the rss feed doesn't work. I had one favorite that showed up as an rss feed in my favorite list but when I put that in my favorites bar and clicked on it it said something like 'no contents' or something.
I recently got a new PC it has Windows 7 Pro 64Bit OS. My old XP box finally died. I have my music drive which is external USB 500 GB drive Seagate Free Agent drive. I used in on my old system. I have about 110GB of music on it. It is my main music drive. I got some new songs that i wanted to add to the drive. I tried to make a new directory and I received a message saying that I don't have permission to create a folder. I tried creating a new folder within my music directory. I can create a new folder within the root of the drive but I cannot create a new directory where I want it. I am an admin on the PC so I even made sure that I was added as a user on the drive when I set permissions and sharing.
I read somewhere recently that win 7 can create an iso file, just by sticking a cd and right click on the desktop and choose Burn. It suppose to have its own iso burner built in. I did just as that message said and nothing popped up. Now, it could be that it may be only on one of the win 7 versions, mine is the home premium one.
Just purchased my first Windows 7 Professional (64-bit) PC (Hewlett Packard). No media was supplied with the machine and I have been advised that media is not shipped anymore (apparantley it is Microsoft's way of ensuring media cannot be loaded onto several systems).
Reading comments on the internet it seems clear that I have to make an ISO file, but I'm unsure what directory/files I need to pick and copy.
i am tried to create schtasks in windows 7 but the task is not popup at scheduled task time. command is: schtasks /create /tn prabhu /tr notepad.exe /sc once /sd 5/2/2011 /st 10:00:00 /ru prabhukumara /rp prabhu
how to create schtasks in windows 7. the above command works fine in windows XP. And to run schtasks administrator permission is nessessary or any user can run the task.
