Could Not Load File Or Assembly
Oct 20, 2011could not load file or assembly.
View 3 Replies
ADVERTISEMENT
Office 2010 Error 1935 During Iinstallation Af Assembly Component
Apr 28, 2010We have identified a potential bug in the installer for Microsoft Office 2010 32-bit under Windows 7 32-bit. After entering the initial product key, if Office 2007 is already installed, the user will be prompted to perform an Upgrade or Custom install. If the user chooses a custom install under the 32-bit platform, the installer will attempt to first uninstall Office 2007 and then install the Office 2010 components. However, a symptom of the problem will begin with an unusually slow installation process, after which an error will appear: "Error 1935: An error occured during the installation of assembly component {E60D1DD4-B04F-4D3A-9E6D-63A0D4D8E4F1}. HRESULT: 0x80070005. Setup failed. Rolling back changes." This error occured with Microsoft Security Essentials v2 resident in the background, as well as XMarks for IE, Logitech Mouse and Keyboard, Realtek HD Audio Manager, and Intel Graphics Media Accelerator for Mobile. After some time the setup will apparently hault a roll-back.
View 4 Replies View RelatedCould Not Load File?
Apr 21, 2011"Could not load file or assembly 'sortkey.nlp' or one of its dependencies. The system cannot find the file specified." This is what it says. Is this something i should look into? I had recently gotten a bsod and used a system restore if that means anything. oh also its and amd notification
View 1 Replies View RelatedQuicken Won't Load Database File
Sep 29, 2012Quicken won't load database file. What are my options? infected with babylon.
View 7 Replies View RelatedDisable Page File - Faster Boot / Load Time?
Jul 1, 2011I am the proud owner of a Windows 7 Ultimate comp with 6gb ram, i7 920, etc... I have had this comp for about 1.5 years, and it has been slowing down... The bootup time has slowly been increasing, and the amount of time for me to actually be able to use programs once I see the desktop has increased. I have disabled all but the completely necessary startup programs/services, but this does not seem to work.
Whenever I start up my computer, sometimes I open task manager and check out the performance window and every time my computer is slow, I see the hard faults skyrocket. At startup, the thing is over the max shown on the graph for a while. To my knowledge, the hard faults/sec represent that the computer is either writing to or reading from the page file.
Anyway, down to the real question: Would disabling the page file decrease startup times, by forcing the computer to write everything to the ram, instead of tying up the already-slow hdd by writing/reading the page file?
Windows Failed To Load Because The System Registry File Is Missing, Or Corrupt
Jan 21, 2012installing Windows 7 on a virtual machine.I have 178MB RAM (which I know isn't enough), but it does the Starting Windows screen before the installation, but then it comes up with this error: File: windowssystem32configsystem Status: 0xc0000001 Info: Windows failed to load because the system registry file is missing, or corrupt.
I have no other OS on the virtual machine.
"error 1935. An Error Occurred During The Installation Of Assembly Component"
Nov 9, 2011I was having problem running office 2007 on my windows 7 desktop hp machine. I uninstalled and wanted to install it again, this time i am getting this error message "error 1935. An error occurred during the installation of assembly component{4C0384C6-ED23-4E23-95F5-C812AAD8EFFE}. HRESULT: 0x8002802F"
View 1 Replies View RelatedWindows 7 Refuses To Load And System Repair Wont Load
Jun 25, 2012I dont know if this is posted in the right area but I'm so desperate to get my laptop working its unreal. First it started off with my laptop crashing, I had totally forgot it needed to do a windows update and turned off my laptop in hopes that it would work properly. After that my laptop has not been working. The machine turns on and gives me two options. Start windows normally or do a repair. Upon starting windows normally, it loads so far before sending me back to the two options of start windows normally or repair. On the second time I clicked repair. My laptop then goes so far before presenting me with a blue screen that is usually the screen where my accounts are. The cursor still moves but it loads no further even after leaving it an hour. I decided to make a repair disk, hoping that the problem was because of windows. the disk loads, gives me a choice on the keyboard language then does nothing. I honestly have no idea what to do, I want to keep all the files safe on my computer as I havent backed them up and I have worked so hard on the projects.
View 1 Replies View RelatedDesktop Take A While To Load And All The Icon Thumbnails Load Slowly?
Apr 7, 2012Im having a couple problems with my computer, firstly when i boot up The icon for the LAN onnection has a red cross to say its not connected even though it is and it will recognise that it is after approx. 5 minutes and will only say network instead of the actual name if my connection (network99) secondly when i log on from booting up the desktop take a while to load and all the icon thumbnails load slowly one at a time and its really slow.
View 1 Replies View RelatedCPU Load Stuck On 100% Load?
Jan 12, 2013Recently my computer is always at 100% even when no apps are running. But as soon as i run Task manager load reduces. This doesnt happen in safe mode. Im sure that this is a virus. When i scan my computer with Avira Antivirus (Free) it doesnt detect anything
View 16 Replies View RelatedHidden File Of Docx File Created With ~$name Of File.docx File
Sep 27, 2012whenever I open docx file there is hidden file ~$name of file.docx created. which type of file is that? Is it in virus, maleware. for example If I open house.docx file then ~$house.docx file created which is hidden form. I had saw this file when i select show all hidden file option. when i try to open ~$house.docx file it show message the file is corrupted and cannot be open.
View 1 Replies View RelatedExplorer EXE File Error - Windows Cannot Access Specified Device / Path Or File
Jan 17, 2009I installed Win 7 and if i try to open my computer of click on desktop and open up screen resolution etc. I get "Explorer.exe -Windows cannot access the specified device, path or file. You may not have the appropriate permissions to access the item." I did a search but could not find anything related to this error in Win 7. I have found some others attached to Win XP but have to do with the installation of some software which prevents access to explorer.exe. When I boot in safe mode this issue does not appear...
View 9 Replies View RelatedRandom Pasting Of Data From Previous Copying One File Appearing In Another File
Feb 20, 2012After doing a copy and paste, we have, on 3 occasions so far, found the copied data in an entirely different file. Twice data from a copy appeared in an excel spreadsheet and once a picture copied in facebook appeared in an email. The excel problem is very worrysome as it is our family budget. how this could happen? In the case of the excel events no paste operation was intentionally done.
View 5 Replies View RelatedCreate A Batch File That Will Move Files Based On The File Type?
Oct 30, 2010How to create a batch file that will move files based on the file type?My Requirement : I need a batch file to copy all .doc files in all my HardDisk to aremovable disk say (Z: drive) . Can anyone make it possible using a batch file
View 4 Replies View RelatedCan Sort Recycle Bin On File Extensions So Can Easily Find File
Apr 24, 2011Can I sort the recycle bin on file extensions so I can easily find a file?
View 3 Replies View RelatedDisplay All Audio File Folders In Detailed File View?
Feb 20, 2011How to force Windows 7 File Explorer to display ALL audio folder content as normal files in detailed view with file name/size/date and without title/artist/album.
View 1 Replies View RelatedCannot Open Resource File Cd:Program File (x86)Calendar CreatorCC Sku.DLL
Aug 3, 2011Was using old veersion of Calendar Creator. I deleted it before installing new version. Now I get this message and it won't open
View 1 Replies View RelatedPut File On Desktop -> Open File -> Access Denied?
Feb 25, 2011Whenever i take a file and put it onto the my desktop, all the permissions to the file is completely stripped. Leaving none able to open the file.I am able to go into access control and add myself again, but it makes no sense at all..
View 9 Replies View RelatedPerl File (.pl) File With Arguments As Windows 7 Service?
Jan 1, 2013I am running Windows 7 32-bit. I have a perl script which i want to start everytime computer starts. Setting it as service will be a good option as i can start and restart the service from command line.In windows XP I was using srvany.exe but that is not a good solution. Is there any way I can make this Perl Script which takes in some command line arguments as windows service. Tried using sc.exe, with that service is created but it fails to start.To run that perl script i run on command line:Quote: perl PesrSclipt.pl --arg1 Hello --arg2 Buddy --arg3 Good
View 6 Replies View RelatedCannot Turn On File Discovery And File And Print Sharing?
May 22, 2012The problem I believe is that on the �change sharing options for different networkprofile page (Control Panel>Network sharing) I cannot turn on the Network discovery and File saring options. click on the two enabling buttons forTurn on File DiscoveryndTurn on File & printer sharing I then find the save changes tab greyed out
View 1 Replies View RelatedReducing Wav File Size (audio File) For Powerpoint?
Nov 5, 2011I had completed a beautiful 82-slide PowerPoint presentation, but the wav file I embedded was HUGE (about 200 MB) and not to my choosing. I just had to have the music a certain length to span across 82 slides. Is there ANY WAY to reduce the size of this music wav file (so that it conforms to the 50 MB max file size for PowerPoint). I would rather embed this music file than to have a link.
View 4 Replies View RelatedFile Too Large For Destination File System?
Feb 27, 2012So I found a post on this forum with a similar problem. I'm trying to move a file that is larger than 4GB in size from my main hard drive to an external, and getting the error message in the title. The consensus on the other post was that the hard drive must have been a FAT format, and that too fix the problem either split up the file or reformat the hard drive as NTFS.Well, by all accounts, my computer is telling me that my external hard drive is ALREADY formatted as NTFS, but I'm still getting this error. I would prefer not to split up the file, but other than that, what are my options?
View 2 Replies View RelatedDeleted File Mapped Onto Existing File?
Sep 4, 2011I'll give an example: two files, names 1st_file.avi, 2nd_file.avi, nearly same size, at different locations. Now I deleted 1st_file.avi and 2-3 weeks after deletion, I open 2nd_file.avi (which wasn't deleted) and find that instead of the original 2nd_file.avi, the contents of 1st_file.avi are being played.How can the contents of 1st_file.avi mapped onto the the contents of 2nd_file.avi?
View 9 Replies View RelatedCannot Rename File Because File (Doesn't) Exists
Oct 7, 2010I tried to save a file and got an error on saving it, so I quit the program. The file appears as if it was never saved and doesn't show up in directory listing (GUI or cmd.exe).
However, if I try to rename any other file to that filename, it says "Cannot rename file, because file exists" and appends a number to the end. I cannot remove the number. This happens both in the GUI and cmd.exe as well.
So, basically cmd.exe del says the file does not exist, but ren says a duplicate file name exists....
I have no idea how to delete that "ghost" of a file so I can actually use the filename. I checked folder options and it's not a hidden file or anything like that - it just (doesn't) exist, but it does?
While Trying To Open A File From Explorer / Could Not Scroll Down To File
Jan 28, 2011I had an unusual happening on my PC. First noticed some instability while trying to open a file from Explorer, could not scroll down to file and it was jittery. Then, every time I tried to enter on an input line, an endless string of zeros were input and I could not overide or erase. Even on Email addressees. I tried a reboot and the zeros appeared on the start up password line and I could not logon. Same thing after complete power cycle. I suspected a stuck key on the keyboard and tried a different keyboard but no help. So I tried a complete restore. At first, it seemed to have the same problem, but somehow, eventually, I got logged on and now everything seems OK. But I don't really know what caused this and fear it could happen again.
View 2 Replies View RelatedUsing File Permissions With An Online File Manager?
Apr 30, 2012I am using Ajaxplorer which is great but I am having some issues with file permissions. Let's say I create a file which is read only in Ajaxplorer it says it's changed file permissions but when I right click on the file to check it it's the same permissions as it was so didn't actually change.
View 2 Replies View RelatedReplace Default Pst File With Existing Pst File
Jan 9, 2013I upgraded from Vista Business to Seven Home Premium. Used Office 2007 in Vista and using it in Seven. In Vista, my .pst file was C:OutlookMyOutlookFolder.pst. Added it to Outlook using Data File Management, but none of my calendar entries appeared (my inbox and all my other folders are OK). When I upgraded from XP to Vista, this worked fine.Where are my Calendar entries?
View 4 Replies View Related.asx Video File Type 'WMP Cannot Play File'
Jun 4, 2012[code] I get the following error message when trying to view a video file *.asx."Windows Media Player cannot play the file. The Player might not support the file type or might not support the codec that was used to compress the file."Plus, I also get a similar error msg with WMC.However if I select VLC to play the video, it plays just fine. Plus I get the following information. [code] Why can't WMP or WMC play this native MSFT video format?
View 2 Replies View RelatedExplorer.exe File And Svchost File Corrupted?
May 8, 2011Explorer.exe file and svchost file corrupted??how do i find them? i am running Windows 732 bit?
View 1 Replies View RelatedFile Content And File Permission?
Feb 18, 2012The contents of several file and folders has gone missing. This includes the "My Pictures" library (my biggest concern) and a few others. Like a couple random Games, Steam, just odd seemingly random folders. This may have been caused by some recent changes, which I will get into- but I am pretty close to just saying several thousand pictures are just...gone.Secondary Problem: I recently had a pretty scary ordeal with the user profiles on my machine. When attempting to login, it would state that the User settings had been altered and would not let me log in. That has been taken care of now, but I feel the two problems are connected, and this is why:Several days ago I was attempting to install a Logitech Web Camera onto my Windows 7 X86 OS. Logitech does not provide drivers for this OS or support the installation, but I have in fact been able to install it in the past with some clever workarounds. While attempting to re-create the troublesome install I had used in the past I caused the Profile problem.The Logitech cam Drivers (Model V-uu22 Drivers for Vista if that is important) touch many parts of the machine they are installed on. There is a sub-folder that is installed in the "My Pictures" folder for storing your webcam snapshots, then a folder in the "Movies" library for a similar function. There is also a sub folder that is placed in the user profile area that stores your user information (I assume) So, while installing these drivers and trying to get them to work again my machine froze up mid-install and demanded a reboot. Upon reboot the user profile would not let me login, then when I rebooted once more to attempt to fix it, the boot file was destroyed. So, in goes the recovery disc, boot from CD and fixed the boot.ini file. Finally gain access to the windows logon and still the problem remains. It took hours to figure this whole thing out. booted into safe mode, deleted the improper SID (SP?) for the users that had somehow been created and ended up just having to use a restore point to undo all the changes. Long story short, I got it working and now the file contents are all wonky.
Now, seeing as I used a restore point to fix the issues, I don't see how the logitech install could have been the culprit, but all of my pictures are gone. I have searched the machine, used a file recovery service, looked all over and now I am coming here.Steps taken to find pictures: File recovery, Showing hidden files, searching all files, Ensuring that the user profiles had not been damaged, lots of google searches, you name it.I did notice, however, that there were hidden files and folders on both my drives that are labeled "pictures", "movies" etc. But I cannot access them. I am on an administrator account, I attempted to change the file permissions using the properties interface of the folders and do not have access, even tried the takedown command on them, but I am not using FAT. I simply have no idea what to do now.
Another thing of note: I use my XBOX 360 to wireless stream content from my machine to the Televisions in my home. I notice that the pictures all made it to the Console, and are viewable- but it seems as if the XBOX has created another User profile that I have no access to and moved the items in question there.All in all this has been very perplexing, and I know the pictures are there, somewhere, and have not been deleted- I just have trouble wrapping my head around what user profile they may be in and how to gain access to that folder.
Specs: MS Windows 7 Ultimate 64-bit SP1, AMD Athlon II X2 245 Regor 45nm Technology, Mobo: ASRock M3A770DE, AMD Radeon HD 6800.
I also have Hijackthis reports and have run full anti-virus and anti spyware on the machine several times.
Windows File OFV.msi Is Corroupt, How To Get That File?
Jun 14, 2012I am having trouble doing windows update as it's asking for a missing file called OFV.msi. I have tried to download this but to no avail.
