Computer Ram Is 3.78 Usable?
Nov 24, 2012my computer ram is 3.78 usable
View 4 Repliesmy computer ram is 3.78 usable
View 4 RepliesI've had a HP Desktop for a few months with 6GB Of Ram, 5.95 or so usable.Recently my computer has been going slow, so I check around and I only have 2GB of usable RAM, is it possible to get it back?
View 3 Replies View RelatedFor some odd reason, my new Windows 7 32 bit laptop is constantly using 40+ precent of it's installed RAM. I checked my computer's properties and found that Windows is only using 2.84 gigs of my computer's 4 gigs of ram. Is there any way I can force it to use 4 gigs? Or at least, force it to use more than my current amount? I have attached a screenshot of my computer's RAM specs.
View 4 Replies View RelatedI have an older desktop, Acer Aspire running Windows 7 Ultimate 32 bit, it had 4gb ram installed (I did know that only 3gb could be used)yesterday I took one of the ram sticks out ( had 4 x 1gb) and put in a different computer. Since then it has started crawling along, I have noticed that it says 3gb ram 1 gb usable. is this something that I need to go into the bios for? I ran the memory diagnostic tool this morning but did not get to see a report.
View 3 Replies View RelatedI have quite a new ASUS laptop, which came with 64bit windows 7 and I took off and installed my copy of Windows 7 32bit (I didn't see the point in having 64bit on a laptop).
When I first installed the OS and everything Windows said I had 3.25GB ram usable or something like that which is normal but for some reason I now only have 2.92 usable and I don't know why >.< (this may have happened when SP1 was installed)
The specs are:
Intel(R) Pentium(R) CPU P6100 @ 2.00GHz
4GB DDR3 Ram
Intel HD Graphics
Mobile Intel HM55 Express Chipset
320GB 5400RPM HDD
Print screen of control panel>system: Image - TinyPic - Free Image Hosting, Photo Sharing & Video Hosting
I have 4g of ram. In control panel it is listed 4.00gb RAM(Only 2.00gb usable) I have 2x(2g) sticksMemory hole remapping is enabled. Max memory is unchecked.I have an M4A785-M motherboard.I have Windows 7 Ultimate 64 bit.This problem started happening a couple weeks ago.
View 9 Replies View Relatedi used Windows 7 64-bit with 4GB of My RAM, But In My Computer detect Is 4GB ( 3.25 GB usable)
can i use FuLLY of may RAM ?
Okay, this is really weird. Previously, I had had a ordered a kit of 4GB ram with one defective stick. After installing Windows 7 Ultimate 64bit with the good stick, I RMA'd the kit back to newegg. The exchange arrived today, and after installing the new kit of ram, windows only recognizes 3.26GB of it! Under the system information panel, it says:
Installed memory (RAM): 4.00 GB (3.26 useable)
despite me having a 64 bit OS.
Whats up with this? I Memtested the ram and it shows up as only 3255 MB in there also.
Does anyone know why?
decided to install hardware with my computer on and i sliped while putting a pci card in and hit su,tin that booted off my computer. now when i got it back on i have this message in my system properties "4.00 GB installed (3.25 GB usable)" anyone know hot to fix this. im using windows 7 ultimate X64. i think i may have either hit the GPU or a capacitor?
View 9 Replies View RelatedSo I have had the MSDN AA version of Windows 7 64-bit for quite some time now and this has never shown up until after I did the latest update. Was wondering if this was out of the ordinary.
View 6 Replies View RelatedI have installed windows 7 64 bit version on new computer with a 64 bit processor Quad CPU Q8200 233 ghz , I have 4x2gb of DDR2 800 RAM 8gb in total all are same frequency but it lists only (3.19 gb usable) after the 8gb in computer properties.
why isnt windows 7 accessing all my RAM as this is why I moved to 64 bit ?
I have 6144mb of ram on my Compaq Presario CQ62 402AU. So I have the 2GB Hp stick which came with the laptop (2GB DDR3 1066MHz) and I have a 4GB stick from G-Skill). So there should be 5.76GB usable, but I only have 1.74GB usable. This is what is it when I only had the 2GB. The Bios says there is 6144GB in there. Windows says there 6.0GB in there also.
So what I have tried:
- Running Mem Tests (HP one which came with my laptop and Memtestx86)
- Taking out the ram and putting them in there sorts again
- Taking out the ram, running a pencil eraser over the connecters and then putting them back in
- Doing testing so Only 1 is in and try that in both slots for both sticks of ram
- Swapping the ram positions
- Making sure that Max ram is not selected in Msconfig
So basic System info you may want to know (Most of my profile info is there of my computer) Windows 7 Home Premium 64-Bit SP1 Installed Memory (Ram) (This is from the basic system info page) 6.00GB (1.74GB Usable). The odd thing is that it worked fine for a while. Today I went to school with the 5.76GB and I come back home 8 hours later, the computer has only been on lock for this time and there is only 1.76GB usable.
My laptop specsWindows says only 3gb out of the 4 I have installed are usable, why is that? Can I do something so that all 4 are usable?Attached is my dxdiag fileThis is my msinfo32 file: url...
View 3 Replies View RelatedI have a computer that is running Windows 7 Ultimate 32-bit. It has 6 GB of RAM installed, but it says that 3.00 GB are usable. My understanding is that Ultimate 32 bit can handle 4 GB of RAM. What do I have setup in correctly?
View 4 Replies View RelatedI have 6gb ram installed but only 3gb ram is usable why is this and how can I get it back to 6gb again.
View 7 Replies View RelatedI have 7GB of ram and right now it says 5.75GB usable, could the rest of it be taken for other programs or for startup?
View 6 Replies View Relatedi am running windows 7 Home premium 64-bit and recently upgraded my RAM from 3GB to 4GB. Windows 7 reports only 3.25 being usable. i have a dedicated video card an my onboard one is definitely disabled. my BIOS reports 4096MB RAM detected. max memory and CPU are unchecked in msconfig. from looking at the resource monitor i see that 770MB of RAM is labeled as hardware reserved memory.also i don't know if my BIOS supports a memory remap feature or not but even if it does its a locked HP BIOS so most setting are inaccessible.is there any way to get my full memory? or does anyone know why this is happening on a 64-bit os?
View 9 Replies View RelatedI have performance problems. Even though I have 4GB RAM installed physically, my hard disk runs like crazy. A moment ago, I encountered the system report below, which says that only 2GB of my RAM is usable.
View 9 Replies View RelatedMy motherboard is the ASUS Maximus III Formula, using Intel Core I5 760. And I recently did a dual boot on my system. One copy of Windows 7 Ultimate x64 on my original hard drive, and a Windows 7 Home premium x64 bit on another hard drive ( Hitachi ) and after a month or two, I had to format that ( Hitachi ) hard drive as I needed it for extra storage and now I'm getting only 2 Gb usable RAM but I installed 4Gb.
View 9 Replies View RelatedI updated my XP 32 OS to windows 7 64 bit professional. Everything works fine on this upgrade. BUT when i go >start>mycmputer>right click and select properties i see 6 gigs but only 3.25 GB usable. Any way i can use the rest of those gigs. When i bought windows 7 two days ago i bought 2 stick of ram with 2 gigs each stick. so i have (2) 1 gig stick and (2) 2 gig sticks.
Like i sed my PC (Alienware was built in Dic2005) originally was made with 32 OS xp if someone can guide me on how to get my info of my mother board I will be glad to follows those steps so i can post them here and hopefully gets some help. If not I just will return the extra gigs I bought.
PS- I reinstall windows 7 from scratched but with OS 32 bit and I could see the same 6 gigs but only 3.25 gigs usable.
i have corsair xms 2x2 4GB 9-9-9-24 1333mhz with phenom 965 and biostar890gxe..........for about 15days after aasembling the pc running windows7 x64 my pc showed ram installed 4gb 3.25 usable
View 5 Replies View RelatedIt is usable only 2.98 GB is seeing there What is the Problem I'm Using the Windows7 ultimate 32-bit
View 5 Replies View RelatedMy PC says it has 4GB of RAM installed but only 3.5GB are usable, I have windows 7 home premium X64.
CPU: Athlon II x3 Unlocked to Phenom II X4 @3Ghz.
Motherboard: Asrock N68-VS3-UCC
RAM: 4GB DDR3 generic brand.
HDD: 1x 320GB SATA, 1x 250GB SATA and 1x 250GB IDE
GPU: XFX ONE 5400 series
PSUEM 500w PSU.
Windows recognized the full 4GB and the whole 4GB were usable but when I checked about 2 days ago it said that only 3.5GB were usable. I started to do a little research and I found out that my GPU might be using Hyper Memory so i tuned off my system, removed the GPU and when I went to see how much RAM was usable it said 4GB installed 3.25GB usable. So its not my GPU.
i am using wndow 32 bit with processor-i3 -3rd gen 3.1ghz mother board-1333mhz intel original ram 8 gb (1600 mhz)- but showing usable 3.43
View 6 Replies View RelatedI have a Trust gaming mouse and for all the buttons to work I should install a driver. However on the site they provide only a 32bit driver for Windows7 and clearly state that a 64bit driver will never be available!
Would the 32bit driver work with W7 64bit?
I know you've probably seen dozens of threads like this, but here's an interesting twist:
The laptop it's on (the Compaq Presario V2000) only has 512MB of RAM, and is showing only 383 available. Nothing near the level of the OS restrictions. (Besides, it's 64-bit.) I've already tried the solution here, but the "maximum memory" box was unchecked.
Any insight?
Under my Windows 7 performance information it is listed that I have 2.5 Gigs of usable RAM even though I have 4 installed. I think this is because I have 1.5 GB of graphics memory but I don't fully understand what that is. I also don't understand the difference between the listed "dedicated graphics memory(512MB)" and the "shared system memory" that I guess make up the 1.5 GB I'm "missing".I was thinking of installing a 64 bit version of my OS to take full advantage of my installed memory and I think my system is fully capable. I just need to have the right processor and enough memory to make it worth it correct? I assume my motherboard is capable if it is using a capable processor.
View 14 Replies View RelatedWasn't sure if this should go here or in the security area. My company has given me a year-old Dell Latitude that they were going to throw out because it got a virus. However, the laptop has all of their network security stuff on it, so I can't even get past the CTRL + ALT + DELETE screen. I mean I can't get in and do anything on this computer. I know I have to buy a new hard drive and probably reinstall Windows 7, but how do I know that this will get rid of everything and give me a clean slate? I don't have accesss to the administrator password, either.
View 5 Replies View RelatedMy computer's memory was 2GB and i added 4GB more, but only 2GB is usable. I have tried many time take the Ram out and put it back but i still have the same problem.
View 9 Replies View RelatedI have also checked the BIOS . but there is no place where i can dissble " Dram over 4Remapp" or something like that.
everything i can think of i have checked.
I know 32bit can't handle more than 2 or 3GB memory, but it can handle 2gb, that much i know.
when i start my computer. it show 1024mb ram . that counts that up. but in everything else it shows 2GB bit 1 usable.
and it says that 1024mb is hardware reserved, ( maybe it is that ? how do i change that ?
I have run a test. nothing wrong with either of the memory sticks
I also have seperat graphic card with 512BM Ram on.
Okay so i have a Quad core x6850 Intel CPU, EVGA 280GTX GPU CARD.
Now i installed window 7 x86 bit version ULTIMATE. And i have 6GB DDR3 RAM INSTALLED INTO MY geforce Nforce 790i motherboard. Now the problem is that in Windows 7 it shows "Installed Memory: 6.00GB (2.75 GB Useable)". But in Bios it shows me that 6gigs in installed.
Now does that mean it is WIN 7 that is just reading my DDR3 RAM WRONG? But i am still getting the full performance for all of my 6GB DDR 3 RAM? Since my bios is reading all of the 6GB RAM?
Also i tried doing what other forums indiated i should be doing like type config and check mark or uncheck mark MAX MEMORY. Tried doing that, but noting happened.
Now the only thats left and i am having confusion with is, some people are saying i should Enable Memory remapping in bios? I have a nforce 790i motherboard, and i can't find that exactly in my bios mode. Is there any other way to fix this problem?