I checked and tried many different things. I can not get the set point software to show my G500 mouse at all. I'm trying to uninstall it now and download the older 5.2 software and see if that works.
View 2 RepliesI have installed WIndows7 in my Laptop dell xps 1330 about one and half months ago. It was running perfect and was not a trial version for one month.
However, still I can update my windows and so forth as original. The fact was, I installed some programmes and softwares which I used before, in Windows Vista! Now-a-days, I experience having problem with the touch pad, CD Rom hardware and Volume...
1. touch pad stucks, pointer doesn't move sometimes.
2. CD Rom start functioning automatically without having a CD inside.. sounds like CD is ejecting from rom.
3. volume button starts increasing automatically and sometimes mutes !
what I guess, it's a virus. I installed a scroll pad driver, I thought the problem was due to the driver. After uninstalling that driver, the touch pad was functioning normally (without the scroll functioning though) and the error was removed. But after two days, I see the same problem again..
Basically, my pointer keeps pushing to a certain point on my screen. It is not pushing in a direction but to a certain point on my screen. It does not do this during safe mode. It also does it during certain times during gaming, where I discovered the problem. For example, it didn't do this when I was placing a turret gun, during the game, but, did so when I tried to make the turret face a certain way and I could only make it face one way. I am doing to do virus scans. It is probably a virus because earlier that day when I tried to download something I accidentally used a download link inside a pop.
View 4 Replies View RelatedOS: Windows 7 Professional x64
Hardware: Logitech G500 gaming mouse
I installed Windows 7 on an SSD and when I plug my Logitech G500 mouse into the motherboard, the mouse appears to work fine for about 30 seconds and then it freezes Windows 7. When I mean freezes, here's what happens:
-I can right click BUT i can't left click on icons, task bar, files, folders, etc.
-I have to switch between windows using TAB
-OS comes back to life only after unplugging mouse
-No setpoint installed
I tested the mouse on other computers and it appears to be working fine. I'm not really sure what the problem is as this never happened when I had Windows Home Edition x64.
my battery condition levels for mouse and keyboard have vanished from my taskbar.running win7 home premium on desktop?
View 2 Replies View RelatedI'm putting together a slide show of 3D images that I want to show on my TV next week when we have company.I would like the images to stay on the screen a little longer without having to actually create a slide show in some special application like Premiere.
The Slide Show function in Explorer works great if I can control the timing.
just completed a first-time new Windows 7 PC build. Successful installation of Windows 7 Pro on WD 600GB 10000 system drive. Went back and installed 4 additional HDD. (2) WD Caviar Black 1TB 7200 RPM and (2) WD Caviar 7200 500GB HDD from XP system that were used for storage.
BIOS sees all HDDs, but are not viewable in Disk Management.
System Specs:
Antec Nine Hundred
ASUS P6X58D-E MOBO
[Code].....
However, only three are visible in Disk Management. Missing (1) WD 500GB (previously used on WinXP system) and (1) new WD 1T.
I dont know what happened to me suddenly my antivirus AVG 2012 detect an intruder on the web browser and remove the browser morzila and after that I have no restore point but i dont know what happens and I feel that my PC has something strange how I can solve this problem?
View 1 Replies View RelatedI was using my desktop like normal then an error came up saying that there was a hdd failure, and that i needed to scan for errors. all my files disappeared and only this error would come up. There would be hundreds of the same msg spamed on my screen. I scaned my hdd for errors using my Bios/Advanced options and no errors came up. I decided to take out the hdd and put it into my External Hdd bay to hook up to my laptop to extract the data off it.When i hooked it up to my laptop it showed up empty. I went into folder options and clicked on show hidden files and folders. Everything came up but it was grey/transparent. I then copied the files to another hdd for backup.
Then i formatted the hdd and put on a fresh new OS. Id like to mention i have a second internal drive that i use for backups but it wasnt backed up recently when this issue happen so i had to take out the main drive and use it as an external to back up onto another external drive.so then when i click on my second internal drive after the reinstall of the new OS it shows empty i have to go in and show hidden files and folders.. now they show again transparent. also i plug in my external to get the recent back up and all those files are still transparent when i move them to my desktop that is freshly OS installed they are still grey/transparent and i have to keep the show hidden files and folders to view them.. so its all my music, pics, documents etc they are all greyed out..i tried to copy my backup IE favs into my new IE browser and they wont show up because they are hiden it shows it copied to the favs folder but in ie i cannot view them if that makes any sense.
My computer qwill freeze for a few seconds followed by system lag which seems to get worse (freezing every few seconds/taking 2 seconds to recognise a click etc.). If i reset my computer it resolves the issue but i was hoping you guys may be able to give me more insight as to what the issue may be.It nearly always happens when i am browsing in firefox. Have never had it happen to me during gaming etc. which is why i'm hesitant to believe it is to do with my GPU or it's drivers which are always kept up to date.i have included pics of the cursor and what processes were running at the time of the freeze/lag
View 9 Replies View RelatedLately I have been having an annoying problem with my wireless mouse. For some reason the pointer will lag, and be very sluggish and jumpy. I've had this mouse on this computer for about a year and I've had no problem. Out of nowhere this problem is happening. I've tried re installing drivers with no luck. I tried uninstalling intellipoint and re-installing it, but when I tried I got the BSOD, and then it completely disabled my mouse and keyboard so I had to use wired peripherals to go in to safe mode and do a system restore. Now everything is working again, except my mouse is still jumpy.
View 3 Replies View Relatedi'm trying to order something from a website and the cursor want open my cart for me to look at it and finish my order. this is happening in several sites not just one.
View 1 Replies View RelatedI have a USB mouse which works fine when it is plugged in at boot time.
When I then (when Win7 is already up) plug the USB mouse out and 10 seconds later back in again then it is not working any more.
Another USB mouse on another Win7 computer does not have such problems.
As I've read over and over, it seems to take at least 4GB RAM to unleash the power of 64 bit computers. That being said, why do the PC makers install only 2GB and says it's not upgradable. In the future, will I be able to get a 4GB RAM upgrade for it. Had I paid attention when purchasing, I would have noticed.
However, my PC runs fine for me now, but what if I want to install some RAM hog programs? This is almost 2010, not 2000, when if you had 512MB RAM, you had something. But I assume that in the not too distant future, a 4GB option will be available to me.
Is it possible to turn the mouse acceleration on only when using the touchpad on my laptop and off when I'm using the mouse? I usually don't use the touchpad when the mouse is plugged in if that's an
View 9 Replies View RelatedI probably spilled some coffee on the keyboard and now I can not inactivate the mouse pad in favor of the external mouse. The only way I can eliminate the conflict is to uninstall the mouse pad. That works fine but every time I reboot for something I have to uninstall it again. As you know rebooting is common and therefore I have to reboot twice for every time I have to reboot. Anyone with a solution to this problem? This is a HP laptop. The mouse automatically installs everytime I have to reboot. I do not shut down normaly.
View 3 Replies View Relatedcan u do a restore point for another hard drive and not c:drive system disk?
View 4 Replies View RelatedIve used DOS then Windows all my computing life (which happens also to be all my life) and i recently converted over to primarally using Unix Derivitives. Now Unix derivitives such as linux have a etc directory which stores all the conf and unmarked configuration files while DOS uses interdirectory INI files for configuration... WHile windows uses INI files, appdata directories in each user directory, a program data root directory, configuration directories in the windows/system32 directory AND the registery...... What is the point of it all, the registery is a great single point of failure and its redundant.
View 4 Replies View RelatedJust ordered the following router: TP-Link TL-WA901ND Advanced Wireless N Access Point: Amazon.co.uk: Computers & Accessories I have a garden shed 30 metres away so hopefully 802.11n should be able to reach. The aim is to use 802.11n so speed is better in my house and my shed. However I heard that 802.11g dongles and computers limit the network speed if you connect them to a router running 802.11n. (Can you do this?)So I might try running 802.11n on the new router (in the main house) and running an ethernet cable down from the new router to the shed where I will have my old Belkin (g) router running 802.11g (as a new access point, if you can do this- if not what are my options)On Amazon, this is the cheapest wire I could find but its not external so will it get damaged quickly if I have it exposed (will burying it underground make a difference?): High Quality 40M CAT5e RJ45 Ethernet Network Fast LAN: Amazon.co.uk: Electronics
View 5 Replies View RelatedI need to a system restore point file without getting into the desktop through Windows 7.
View 3 Replies View RelatedI have a PC with win 7 pro 64 bit which has been working fine for months. A few days ago, I fired up the PC and noticed an old wallpaper and some application icons in the desktop were missing and some that I had deleted suddenly back there. I looked at the restore points and there are none older than a few weeks, but this particular config is 8 months old. When I try and restore to a more recent recovery point I get an error message telling me that there is an invalid parameter.I rebooted the PC and all was well again for a day but now it has reverted to the old config and nothing seems to shift it.My data is intact ( backed up as well ) but I am at a loss as to a) what to do next and b) what caused this problem
View 6 Replies View Relatedhey should i create an restore point right away before i start scheduling them in ? just to be sure it all works first?
View 1 Replies View RelatedI have two hard drives. C: drive and a D: drive.
Is there any way to point the Recycle Bin away from the C: drive to the D: drive in Windows 7 Professional?
I was having problems with my i7 system freezing during installation. After reading through these forums I removed 2 sticks of RAM, my sound card, and my wireless PCI adapter and both of my WD hard drives. Everything's working now!
My question is at what point should I start reinstalling my hardware? Should I install my mobo drivers first? Can I also add everything back in at once now?
By the way, these forums seem really helpful! I'm looking forward to browsing through the different forums here!
I'll try to be detailed on this. I've worked on it and read on it for almost 7 hours and I'm stuck. I'm using a Win 7 Pro desktop that is hardwired and a Win 7 Home Premium laptop wireless. Both current on all updates.My Comcast modem is hooked into a WRT160N that is hardwired to a WRT400N which is being used as an access point, and to the desktop PC. Both routers have the latest firmware. Both routers have the same SSID and password but use different channels. (2 & 6) Internet works perfect both wired and wireless through both routers.The homegroup has been set up through the desktop but I've removed and added homegroups on both machines multiple times. My problem doesn't go away. The homegroup works when the laptop is either wired or wireless using the WRT160N. It will not work at all through the WRT400N. I can be in the room with the WRT160N on the homegroup, when I move to the other router so the wireless switches to the WRT400N, it drops the homegroup. The internet stays connected just fine. Once it drops the homegroup, it can't find it until I go back to the main router.Both machines have IPv6 addresses, auto discovery is on.
View 1 Replies View RelatedHow do I pdf A TABLE FOR THE THUMBNAIL point to the document
View 3 Replies View RelatedI have received email PPS, 13 Mb. But I cant open it with my new laptop. OFFICE HOME and STUDENT 2007 is installed. But I can open it with my old computer of 32 bits where Office home and Student 2007 is also installed (same CD).
View 2 Replies View RelatedI want to restore my computer to May 31, 2012 11.am so I type this in and I'm told the restore point has been created successfully. However, when it finishes I see that the computer will be restored.
View 11 Replies View RelatedI have Microsoft Power Point Reader installed. When I receive a Power Point presentation in an email, Windows 7 can't open it and I have to save it then open the Reader myself to see it.What can I do to get Windows 7 to find the Reader?
View 3 Replies View RelatedWhenever I boot up my computer from a shutdown or a restart, the following error message comes up:"FAEnrollWiz.exe - Entry Point Not Found (Title of the window)The procedure entry point fgetRTLREADING could not be located in the dynamic link library FAConsIfDLL.dll."Only option shown is an OK button.Ran CHKDSK and a few other basic diagnostics, but I'm thinking it's a problem in the registry.
View 3 Replies View RelatedOn particular s/w startup I'm getting Invalid floating point error and application freezes.
Sys config:
Win 7 Prof 64bits SP 1
AMD A8 with AMD Readon HD 6550D Graphics
4GB DDR3