Windows XP Virtual PC - Importing Applications To Different Users?
Jan 24, 2013
I have just starting using a machine at work that was previously used by someone else. I am trying to access an application that I am told can only be accessed using the virtual XP. I created new credentials and launched XP Virtual PC. However, I have no application access under my credentials. The previous user had access to these applications under their credentials. Is there anyway I can transfer or import the applications from the older user to mine?
View 2 Replies
ADVERTISEMENT
Oct 2, 2011
is there a way to force Windows 7 to unload/close/kill (last resort) applications from the virtual memory even if the gui & any icon disappeared from the desk-task bar, when i closed them ?
View 8 Replies
View Related
Apr 4, 2011
For those who want to try out SUSE LINUX 11.4 (KDE version) without hassle of install etc then you can download a vmware version with a lot of apps already installed.The link also gives a few other Linux distro choices. These should also work with VMPLAYER too if you don't have vmware workstation.VMware image and appliance download Use the Bittorrent download to keep the server load bandwidth down -- BTW this is a 100% TOTALLY LEGAL and GOOD use of Bittorrent - all torrents aren't illegal / pirated software. Loads of linux distros are supplied this way as well.(Hope not against Forum rules - but I do know lots of people have an interest in trying out / learning Linux and by running as a VM on Windows seems to me an EXCELLENT way of not only learning about Linux but also discovering the great use of Virtual Machines too).
View 2 Replies
View Related
Nov 19, 2012
I've taken on a migration project for an SMB. They have an ancient application that they use and cannot find a replacement for.
The problem is that the application writes to the root of C: when creating mail merge documents, while this wasn't an issue on XP with the correct permissions its a problem with 7 due to UAC not letting standard users write to that location.
The software vendors have come back with the standard answer "turn UAC off" ... nope .. not prepared to do that.
I've managed to get a copy of the application so I could do some experimenting with Virtual XP mode. While this allows the application to run and create the mail merges correctly it seems to require the creation and setup of a VM every time a new users logs on.
Is there anyway to share a single VM between multiple users or could it be done by assigning published applications to all users on the host?
View 2 Replies
View Related
Dec 14, 2012
I upgraded to Windows 7, but I have a few software I installed on Virtual PC 2007 before. I use XP mode but can't find a way to use the virtual HD created with Virtual PC 2007. Is there a way to convert the virtual HD so that XP mode can recognize?
View 1 Replies
View Related
May 5, 2009
How to Change Virtual Machine Settings in Windows Virtual PC ?
View 0 Replies
View Related
Jul 25, 2010
How to Delete a Virtual Machine Created with Windows Virtual PC ?
View 0 Replies
View Related
Jan 31, 2010
How to Boot from a CD or DVD in a Windows Virtual PC ?
View 0 Replies
View Related
May 1, 2009
How to Create a Virtual Machine in Windows Virtual PC ?
View 0 Replies
View Related
Jan 24, 2012
My father replaced his Windows 98 machine with a new computer running Windows 7.He's currently on 32-bit ultimate, but we could change versions if needed.He's really hoping there's some way to force Windows 7 into a single user mode, primarily so C:usersAll Users, Default User, Public, and his own user are merged into one. It's absolutely driving him nuts the way it is.
View 2 Replies
View Related
Jan 9, 2013
I completed the transfer but I am having permissions and access problems to various files and folders. What is the correct way to release the security or permissions for files and folders?
View 1 Replies
View Related
Feb 12, 2012
Until last week I used the operatating system windows Vista and accessed my e-mails via outlook express. I transfered a copy of my e-mails onto an external hard drive (saved as EML files). I had my computer cleared up and Windows 7 installed instead. Is there anyway that I can now put the e-mail files into the windows 7 Outlook so I can read them. I can only open the eml files in notepad at the moment which isn't very good. I have managed to import my contacts into windows outlook but I cannot import the e-mails.
View 4 Replies
View Related
Sep 6, 2012
Got a new Windows 7 Enterprise 64 bit machine, found that it did not come with virtual PC. Downloaded the critical patch Windows6.1-KB958559-x64-RefreshPkg.msu and installed it. Windows Virtual PC shows up in my Start Menu. Good so far. I go through the steps to create a virtual machine and use the option to 'use an existing vhd file' and when I click 'Create' I get the above pop-up message "Cannot attach the virtual hard disk to the virtual machine. Check values and try again". A factual message but completely useless as with all error messages from Microsoft. I have tried the following:1. When I attach that vhd using Disk Management, it mounts in drive E:, I can see the files and browse the dirs in E:. In the Disk Management View, the drive shows up as 127 Gigs but 107 is unallocated space. The physical size of the vhd is only 25 Gigs2. Others in my company were able to create the virtual machine with the same vhd, checked the byte size and timing, so nothing is wrong with the vhd file itself.
3. Tried to create after shutting down all virus protection including the Micorsoft antimalware protection service. No luck4. Tried Vhd resize to resize the vhd to a smaller size (since it showed up in disk management as 127 Gigs, I thought maybe it was that size), but VHDResizer could not open the input file, gave an errors "Can only load fixed or dynamic drives"
View 3 Replies
View Related
Jul 13, 2011
I have just upgraded to Windows 7 and Windows Mail. My old drive was not in good shape and could not be left connected, so I had my Outlook Express email stored to a My Docs location, which is were they sit in an .eml file format.
1. I have tried to have Windows Mail import them - no luck there
2. I have tried to drag and drop the file from exsisting folder to a new Windows Mail folder - it opens the file, but in a strange unreadable format - no luck there/What do I do to be able to access and read my old OE emails?
View 9 Replies
View Related
Apr 25, 2012
I have installed a new larger hard drive into my computer and have reinstalled windows 7. This is the first time I have done this and did not realise that I needed to Export all my IE favourites. I simply copied the Favourites forder and all it's contents to a backup drive. Now I want to place all the Favourites back into IE. I can Import them from the folder one at a time but I have loads and it would take hours! Is there a way to get all my Favourites back into IE?
View 2 Replies
View Related
Dec 6, 2011
The import wizard only imports outlook express contact in wab file format. All my contact are in outlook in pst file.
View 1 Replies
View Related
Jan 30, 2011
I just installed a new 64 gig SSD in my computer. I also have a 2T secondary hard drive.The SSD is not big enough to contain all the stuff that will eventually be in "My documents",i.e. under "users" so I need to move the users directory to my secondary hard drive but havewindows behave as it were in its original location.I did some research and found the following technique which seemed plausible (and several people said it worked for them)
1. Install windows normally.
2. After install, boot from installation disk.
3. Get into the command prompt by clicking "repair".
4. Use robocopy to copy c:users to d:users. The command line should be: robocopy c:users d:users /mir /xj /copyall
5. Verify all files copied successfully.
6. Delete c:users. Command line should be: rmdir /s /q c:users
7. Delete c:documents and settings. Command line should be: rmdir "c:documents and settings"
8. Create junction to new users directory. Command line should be: mklink /j c:users d:users
9. Create junction for the old "documents and settings". Command line should be: mkdir /j "c:documents and settings" d:users
10. Restart computer.
Note:When in recovery mode the disk drives end up with different drive letters than what the normally have.Consequently my SSD drive which is "C" became "E" and my hard drive which is "D" became "C". Confusing, but I adjusted the above commands to reflect this.All seemed to go well until I rebooted. The computer booted up fine, but when I entered my password to log in windows complained that it could not find my profile. Since I could not log in at all I was forced to re-install windows. Supposedly, this is doable and I NEED to do it asap as my SSD will not hold all the stuff that will eventually be in "users".
View 3 Replies
View Related
May 4, 2011
I am cleaning a laptop out and i created a brand new user name. I deleted the other 2 users using the control passwords2.
So the machine starts and i select the user. Process usage is very high and it says 50, but actual user shows about 9. I click show processes from all users and i find the culprit as well as 50 processes. I deleted the users so there shouldnt be that option.
Why is there more processes if this is the only user, why does it even have the option?
View 1 Replies
View Related
Apr 3, 2012
What are the all users and default users folders? Do I need them or can I delete them if I am the only user.
View 2 Replies
View Related
Nov 10, 2012
I will if I have to manually delete them, although I'm not sure what other files may still be around on my drive that are located in Users/All Users that are redundant any recommended programs that I could depend on for this task ?
View 2 Replies
View Related
Oct 10, 2011
When I import messages from Windows Live Mail into Windows Live Mail, I proceed as follows:
- In Windows Live Mail I select Import messages, then Windows Live Mail and then finally I browse and select the location. Eventually I get a screen saying: Importing message ... of ... messages.
- When I check later in the Storage folder. I cannot find all the messages. During import it says that it is importing for example 21 files but when I check the Storage folder only 3 files are displayed.
View 5 Replies
View Related
May 15, 2012
I recently had to reformat my hard drive. Before doing so, I exported all of the registry mail rules and saved them on a flashdrive. Now, after reinstalling Windows and WLM, I am trying to figure out how to get the rules imported/reinstated without having to recreate them all again.
I merged them; i.e. clicked on the registry files I exported and saved prior to the reformat, and they are now in the registry themselves, but what else am I supposed to be doing because when I open WLM, there are no rules.
View 5 Replies
View Related
Jan 26, 2011
I am tring to import my outlook Express Address book to windows 7. It indicated I did indeed imported the files, but They do not show up in my contacts list. I also added my Comcast mail account to the windows mail list and they do not show up there either.
View 5 Replies
View Related
Jun 29, 2012
I can't imagine I can be the only one with this problem !! I have just purchased a new PC running Windows 7 and wanted to inport my backed up emails from Outlook Express which are on a hard drive in .dbx files.When I go to the drop down list in Windows Live Mail and click Import Messages a box appears and says select the format you want to import emails from and it lists Microsoft OE 6, Windows Live Mail and Windows Mail. I click the OE option and then next then a box about the location of messages appears. I click browse, find where the messages are and click next.A window opens and asks me to select folders and I select All folders (although I have tried a single folder without success) and then click nextA small box opens and I can see the folders being imported. When finished a window opens and says import complete and the messages are in Microsoft OE formatWhen I go back into Windows Live Mail in the Storage folders there appears a file called Imported Folder but when I open it there is nothing in there.
Mhy question is am I looking in the right place for the imported emails or have I missed something.I know the emails are on the hard drive and it says it is importing them but I don't know where.........I have looked on the desktop and in a couple of other locations but no joy.Apparently you can but a prog that opens .dbx files and displays them in an OE style. It is FreeFile Viewer but free it isn't.
View 4 Replies
View Related
May 30, 2012
I have been trying without success to export Outlook express mail from an XP computer into Windows live Mail on a brand-new Windows 7 HP computer. I have followed the directions on the Internet to copy the Outlook express mail folder onto a flash drive. The directions I followed were to go to Outlook express, click on tools, options, maintenance, store folder. Then copy store location, go to start menu, click run. Then when the Outlook express folder opens with the DBX files, I copied the entire folder to a flash drive. I have followed the directions on the Internet to copy the Outlook express mail folder onto a flash drive. I go into Windows live Mail import and follow the prompts. It acts like it is copying the DBX folders, however when it is finished there are no e-mails in the imported folder. I have tried over and over and have no luck. I have no idea where the e-mails are or if they are actually available.
View 6 Replies
View Related
Jan 21, 2012
I have bought a new computer with Windows 7 preinstalled. Before setting it up I backed up all my outstanding emails (204 .dbx files) and email addresses (one .wab file size 176kb) from my old computer on to a memory stick. I now want to import them into Windows Live Mail. I have gone through the recommended procedure for the emails, but only some of them have come across. I have been totally unable to import the addresses. The only procedures I have found seem to relate to a different version of Live Mail because they tell me to click on things that don't appear on my screen!It occurs to me that maybe not all the messages are being imported because I haven't imported the relevant contact details. Could this be the case? By the way I can't go back to the old computer as it has completely died, which is why I replaced it.
View 1 Replies
View Related
Jun 3, 2009
i installed seven and with the office along. i need to import all my e-mail that I backed up and i don't know how to import it onto my microsoft outlook on Windows Seven although on XP it was very straight forward.
View 2 Replies
View Related
Dec 7, 2009
In XP, you could assign custom names to a group of photos when importing, but i can't seem to do that in 7. For instance i could tell it Name: "08.09.2009" and it would name each photo 08.09.2009 001, 08.09.2009 002, etc... Why would they make it so you can only label your photos a few ways. Any way to edit a system file to have more options show up?
View 0 Replies
View Related
Jun 7, 2012
I added more favorites into IE and I'd like to transfer the new ones into Firefox.
Firefox imported some when I first opened it but how can I add more without manually adding each one?
View 4 Replies
View Related
May 18, 2009
Last night, early hours of this morning I undertook the herculean task of tidying up my favorite folder in internet explorer on my XP Home PC, I then exported the lot to a folder on my XP desk top. I then transfered that folder to a back up drive, then transfered it to my new Win 7 desk top on another PC.
So now I have this favorites folder but can't seem to find a way of transferring/exporting it contents into Win 7 favorites, how do I achieve this please?
View 9 Replies
View Related
Oct 30, 2012
I just created 3 new accounts in Outlook 2010 and set one of them as the default. Then I imported a csv file containing another compute's contacts. All went as expected but for the fact no contacts appear in the other accounts. I also imported another csv file for Calendar to the default account and each account shows the correct calendar entries. I guess Contacts don't behave like Calendar. So, I tried to import the Contacts csv file into the other accounts but could only find 'suggested accounts' a a target for the import.How can I get each account to have Contacts?
View 1 Replies
View Related