finally after i got win7 to recognize my hdd, i thought i was home free. nope. now when i install 7, it goes thru the setups and file copying and all that, but once it hits the first reboot, it goes back to the initial "install now" i realized that maybe the boot order needed to be changed, so i did that, but going that route will cause a blue screen, and back to a restart.
1 time, and im not sure how, i managed to get to the final step before it was 100% done. but i cant figure out how to get there.
right now, i booted from the flash drive (my windows 7 installtion) and it now appears to be frozen on the starting windows screen.
First off this is a newly built computer, all fresh components. aftercleaning/activating the hdd via shift +f10 at Windows 7 setup,(which took me a day to figure out) i was very excited to see my hdd available for Windows 7 installation. as i proceed windows does its thing, after installing its time for the first restart. it restarts right back to the initial windows 7 setup ive done a lot of research, and majority of the problems seem to be the boot priority in bios. so i made sure that it was usb-hdd, then hard drive. (Windows 7 on flash drive for me, no dvd burner available). still the same thing, right back to initial setup. i tried maybe to remove the flash drive during the 10 second countdown to restart, but when it restarts, the windows splash screen comes up and then blue screens and restarts real quick. cant see what the error is on bsodthere have been a couple different start up issues, "windows did not start properly" "select version of windows to start from" (or something to that effect.) but its all the same outcome. windows 7 just wont finish installation
I formatted my hard drive to reinstall windows and for some reason when I reboot the computer after installing from the DVD it won't go further than a black screen...
Back in October my wife's machine had a malware infecion (http://www.bleepingcomputer.com/forums/topic423457.html). After much work by Gringo and me, the machine was declared clean. However, even at that time the Service Pack install would not complete. It would churn and try to install and reboot and certainly act like all was well and completing, but eventually it would say something like "Service Pack failed. Resorting to previous cnfiguration". With the holidays approaching, solving this issue was pushed to the back burner. Now that I have some time, I'd like to get the machine fully updated.
Trying to install Windows 7 and get hung up after clicking the "Install" button on boot-up using DVD. It loads for a bit, then tells me a CD/DVD Driver is required and can't be found. I've tried using the WindowsSystem32Drivers directory but it says no drivers can be found. I had to get the iso from a bit torrent; could it be I've got a 64 bit install disc and only 32 bit drivers? Maybe that's a dumb question but I'm trying to figure out why I can load the install up to that point from the DVD but it won't locate drivers.
New gaming PC project: Asus Rampage Extreme IV I7 3960x 32gb Gskill 2133 mhz Sound Blaster Recon 3D 2 Corsair Force GT 60gb sata3 2 Corsair Force GT 120gb sata3 Windows 7 home 64bit w/anytime upgrade to Professional (Didn't know about the 16gb ram cap...) 9800 GTX video (ran outta money...)
The issue I'm having is everything seems fine till the first reboot, then I get errors about some random important file is missing or corrupt, please insert your DVD and repair windows or whatever the hell it says. The specified missing file is always different each install attempt (I have made about 30ish attemps so far in every drive configuration I could think of). Once it even said 'a system file' is missing or corrupt with no file specified. One attempt (120gb drives in raid0 with no other drives attached) did make it to the Windows 7 load screen, but then windows encountered an 'unknown error' and had to close while finalizing.
What I wanted to do was raid0 the 60's for boot and raid0 the 120's for games, but I can't do that because while this mb has 4 sata3 ports, only 2 ports are raid capable (Intel C600 controller) as the other 2 are on an ASMedia controller. As that is the least of my problems and only my fault for making assumptions before I buy crap, what I thought to do instead was install win on one 60 on the ASMedia sata3 controller in AHCI with OPROM enabled, use the other 60 for task file, and raid0 the 120's for game installs. At first I thought the problem was bad drives because it installs fine on my old HDDs, but all 4 drives DOA seems unlikely so I figure I'm doing something wrong.
There are multiple posts about issues with these drives on Corsair forums, however none of their solutions provide a fix. Currently I have Windows 7 installed on 2 seagate 160gb HDD's in raid0 on sata2 with both 60's on sata3 ASMedia and both 120's in raid0 on sata3 Intel C600 controller. I am convinced there is no problem with any drive as I have multiple games installed on the raid0 with task file on 1 60 and the other 60 is dedicated to ready boost. Honestly I have no idea what ready boost does, and with 32gb of ram it probably doesnt do much - but I can't think of anything else to do with the drive to see if I get any system hangs or issues.
After a week in this configuration I have had no issues whatsoever. I have run error checking from the properties tab in win for all drives, as well as chkdsk from command prompt and the disk checking utility in partedmagic which all came back no problems found. ATTO benchmark shows the the 60's around 475mb/s read/write and the 120's in raid0 are about 1100mb/s read/write. These SSD's are lightning fast. My HDD's are not - 275mb/s read/write in raid0 . Must needs faster boot.
I have tried installing win on each drive individually on each controller twice (16 attempts) and tried each set in raid0 a few times. Every attempt started out with a partition deletion and a secure erase using partedmagic AND sata3 controller in AHCI mode per Corsair forums. I have done Corsair's 1.3.3 firmware update to each drive. I have tried letting windows partition/format each drive during the install. I tried booting from my HDD's, then creating partition tables, allocating sapce, and formatting the SSD's from disk management, then installing win on the drives already setup. And a few other various things in different orders.
My steps for the 1 result that yeilded and actual Windows 7 loading screen after 1st reboot: - 2 120gb ssd's on Intel C600 sata3 - Enter bios - change sata from raid to ahci - exit -Boot with partedmagic bootdisk - deleted partitions both drives - system suspend for drive reset - secure erase both drives - shutdown - Plugged in 2 160gb hdd to sata2 - Enter bios - change sata from ahci to raid - exit - Enter raid setup utility - create raid0 on 120gb ssd's with 32kb strip - exit - Boot win from hdd - create MBR partition table, allocate all avail space, format NTFS (not quick format) - shutdown - Unplugged 2 160gb hdd - Boot from Windows 7 install disk - install to SSD raid volume - 1st reboot yeilds load screen then 'unknown error', but I guess it was some-what better than windows failed to start due to whatever random file missing or corrupt.
i was having problems with my pc and did a complete reinstall windows 7 after install up dates take place after install restart pc freezes to get going again i have to restore and loose all my updates does that sound as if this question is from a pc expert.
I was successfully running Windows 7 Ultimate x64 on my machine as it was with a AMD Athlon dual core processor, on my MSI 770T-C45 motherboard.I purchased and installed a AMD Phenom II X6 1055t which IS supported by this motherboard (after bios flash).
I flashed the bios using the correct procedures, and any time i wold log into windows i would get BSOD and the message "SYSTEM_SERVICE_EXCEPTION" and also down below "rushtop64.sys" something... i would post the dump, but i have since formatted.I couldnt solve that issue, the computer would run fine in safe mode.i had not changed any other hardware. I googled for ages, and saw that if i was to change processor to more cores, that i should re format and reinstall windows.I got my windows disk, tried to do a clean install. Once it "completing install" and restarts, all i get is a blank black screen with the ( _ ) cursor type thing flashing in the top left of the screen and the computer freezes.
Last night I was upgrading from Vista to Windows 7 via download off of the microsoft site (so I do NOT have a startup disc). As the computer was in the middle of a restart, I lost power during a storm last night.Now when I turn the computer on, it gets past the "Starting Windows" screen and to the point where I can see a default desktop image, but I never actually see the desktop. Instead of seeing the taskbar or any shortcuts, it just brings up a DOS prompt and I have no idea what to do from there or how to get it to restart the install or pick up where it left off.
I'm at a friends house posting this, so I don't have all my computer specs, but I know it is completely Windows 7-compatible.
i am planning to install windows 7 very soon but am worried that while installing windows 7,vista will be completely formatted if doing a fresh installation in-case if i don't like it, can i re-install vista using the recovery disc?my pc came with vista installed on it so i dont have a guniene DVD for vista.
First, my laptop is a Aspire 5250-BZ853. I received it back in October, I think...may've been earlier. But anyhow, it was working just fine yesterday until I did a Windows Update. I had to restart, and it was fine again. But then it began running sluggishly slow, and just terrible overall so I restarted it once more and that was when the problems began.
This entire day, this has been driving me nuts. I have important files on here, and I backed up most on my external harddrive a bit ago but there were a few I missed and hadn't the chance to get (ironically enough the most important, papers and such.) At first, it said my password was wrong -- as if someone had changed it! I restarted it once more, thinking it an error or something, and did that again so I restarted it again. Finally, it worked but I think it logged me in as safe mode somehow. After that, it restarted on its own and began this loop. I did a LOT of searching on Google until finally someone suggested to someone else to try pressing "ALT + F10" I think it was as it was starting, and finally I made progress. Before that, it was just going into a constant rebooting loop and I couldn't even log into safe mode. Trying to reset it back to a time it was working was futile, because it said there was no recovery time there! So that shot that idea down. At last, I got somewhere.as well. I clicked the reset to factory settings, but still keep all the files (and they would be saved to "C:Backup" and I thought it had finally worked. But now as it reinstalls, I got an error saying something about how it needed to restart or something...so when I clicked "okay" it began again, and finally it all just came to a stop on "Windows could not complete the installation. To install Windows on this computer, restart the installation."
on my new hp laptop i used to do schedueled backups on my elements wd external hard drive regularly but suddenly it stopped completing backups because as soon as it gets around 70% my windows restarts the drive it happened 20 times already
something shut down my new laptop when i went to put on for some reason it needed to reinstall windows 7 home premium.... after loading windows files appears ....then it stops says please wait..... the screen goes black then reads setup is starting services a box appears andsays ........windows could not complete the installation............i push OK...it then says to install windows on this computer restart installation ............th;is happens over and over again....and nothing more........i have tried a restore,systems check,tried to open in safe mode,....
Just got a new HP laptop for Christmas (yeah. It's not even 7 on Christmas morning and I'm already having problems.) I've seen a lot of people with this problem, but I can't fix it the way they did. "Windows could not complete installation. To install Windows on this computer, restart the installation." Here's the catch:I can't start it in Safe Mode.I can't access task manager.F11 does nothing.I've tried alt+tab to see if these things are running in the background; they're not.I don't have any disks.It's an HP Pavilion dv7, and I got it refurbished.
I have just restored my c drive and now during setup is preparing your computer for first use a message appears saying windows could not complete the installation. To install windows on this computer, restart the installation. It shows this message everytime I startup and keeps resetting the computer
I had a Windows 7 installation but then installed Windows 8 over it, a few weeks ago.I felt like my computer was getting too bulky and slow, so I decided to restore it to the factory conditions (system restore) by using my Windows 7 recovery disc. The restore finished and restarted, and went right to the Windows 7 loading screen, where it ended in this error message: Quote: Windows could not complete the installation. To install Windows on this computer, restart the installation. I can't restart the installation though, since the "System Restore" option is grayed out on the Windows 7 recovery disc.
Error: Windows could not complete the installation. To install Windows on this computer, restart installation. Then it gives me the option to select ok, but when I do, it will keep repeating itself. The pc will not do anything else. I have tried F2 and selecting some options, but its still the same thing. I guess what I am trying to say, its that it does nothing else but repeat itself. I do not know what else to try.
so i was trying to do a clean reinstall of windows. so all was good till i got to the completing installation part where it just stoped and said windows could not complete installation restart and try again
after this is said setup is starting services then a pop up comes up saying windows could not complete installation. to install windows on this computer , restart theinstallation. after i restarted my labtop the same thing pops up and it loops this message and my system is a windows 7home p 64bit
I am totally at my wits end. Been trying to get Windows 7 Home Edition to work on my pc for the last 4 days but no joy.I installed it first on Sunday, which worked, loaded up and I started putting on my antivirus, updating graphics drivers and windows updates. Then, it all froze on me, and since then I have been unable to load Windows 7 at all. I assumed it was down to a corrupt download/update it had done, so I tried the Repair option on the Windows 7 disc. No fix there. So, I decided to format the drive, and redo a clean install, but now, it reaches Completing Installation stage, and either goes into a reboot loop, over and over, or it reaches the Setting Registry Settings, and then goes into a reboot loop. I've tried so many options through the google sites, but nothing is making it work again. Can anyone advise me what to do to fix this and get it working again?
when i try to boot up my laptop i get a WerFault.exe error. (WerFault.exe Exception illegal instruction (0x000001d) ocured in the application 0xfb686842.
I've seen some postings on this subject telling people to do various things in control panel settings, but my computer never makes it that far. It just stays on the desktop screen with no widows button or any desktop icons ever appearing.
I'm running Windows 7 and have activated the Windows Fax & Scan software. The modem Verizon USB760 is our fax modem. When the software was initially activated, outgoing faxes were sent fine. Recently, it's stopped working completely. Only the coverpage is sent, the fax job fails and retries as many times as I have it configured or until I delete the fax job. I've tried typing directly into the section for page 2 of the fax, and I've tried attaching pdf or txt files with the same incomplete result. I can view the complete fax in the outbound box.
I am trying to install my windows 7 and it wont complete the setup. After all the files load from my original disks, the computer restarts and starts the setup but its been a blank screen for over 2 hours now and still nothing. I can use the restore from an image file and it sets up in 30 minutes and works but i have no home group setup and cant read some external hard drives right so I wanted to try a clean install. The computer is a Gateway 64 bit.
each time try do schedule back up it fails to complete. Repeatedly requires first dvd subsequent attempts and says unable to write to dvd. driving me bonkers.
Basically as it says in the title. .turned on autocomplete to remember email addresses etc and its not...read various threads on other sites before i started this thread but not clued up enough and quite wary to use their methods.
I have an Acer aspire 5732z windows 7 computer I tried to restore to factory settings from the same computer Everything was going well, but near the end of the installation appears like Windows can't complete the instalation because of some error! I have tried many times to reinstall it in all modes but I gets the point where tells me to reestar again and again?
I have a new computer, Dell Inspiron 580 Windows 7 64-bit. I was trying the "Format" option in Windows Explorer and got the following message: : Windows was unable to complete the format." I had a DVD R/W disc in the drive.
i have a problem..my labtop isnt starting up. its constantly telling me that windows couldnt complete the installation. to install windows on this computer, restart the installation.
My sister has a miniHP 110, which was experiencing virus troubles, so I offered to do a factory restore. I have used that option several times on my regular HP laptop with no issues, but on her's, it's giving me the error message 'Windows cannot complete the installation in safe mode. to continue installing windows, restart the computer.' It goes on in a loop. I've tried booting it in safe mode, but to no avail. I've been playing around with it for a couple of days, and got to the screen where you choose accounts from. It said the account had been disabled, and to check with my administrator. I would go through the trouble of getting a windows 7 disk, but with this version of HPmini, there is no disk drive. I'm at a complete loss, is there anything I can do?
