Windows 7 Upgrade Then Upgrading Boot Drive?
Mar 31, 2011
I tried to replace all the old drives and put my old C in an e-sata toaster. It boots, runs fine etc, but get errors from the install disk. MS said the install disk was bad, sent it back to newegg who verified it was good.A friend (IT mgr.) said this upgrade methodology can be an issue. He said put the old drive back in, upgrade, then Backup an image and put it on one of the new drivesA old drive 160MB new 1TB I've read if I do this I'll end up with only 160 MB availableB Acronis seems to be the program to get, will it do this and keep the entire drive, all 1 TB available?Are the instructions with Acronis sufficient?Really stuck now for a month between crap MS Support and newegg saying the disk is good and really need to sort this now, I need my computer for work, Photographer and have images to deliver, reason to upgrade to Win7 64 is the Ram expansion for CS5The install disk just came back from newegg last night and I have reloaded the original boot disk back into the system and it functions normally.
View 5 Replies
ADVERTISEMENT
May 29, 2011
I was running an upgrade version of Win 7 Home Premiun 64-bit and decided it was time to upgrade to a larger capacity hard drive.I got a new western digital HD and for the 1st time decided to use the Acronis True Image HD Clone feature for the installation.Cloning took about 25 minutes and was completed successully. Upon reboot, I got a message that windows wasn't genuine and I could either select to do it then or remind me later. I recall selecting remind later.My thinking at the time was to make sure my clone of the older drive was indeed successful so I selected remind later.So at this point, I still have my older hd with Win 7 installed and also the new hd with win 7 installed and also my previous win xp pro hd installed to access older files as a slave drive. I'd never utilized a dual boot setup.Once I verified that my newly cloned hd was successful, I shutdown to remove the older win 7 hd which I did and rebooted. This time my older Win XP loads (it is not selected as boot dive in BIOS) however it still loads.
I then remove that drive (the win XP drive) rebooted to BIOS and selected my new HD drive with win 7 as boot drive. Win XP still loads! At this point, the only drive connected is my ne hd with Win 7 but XP is loading.At this point no matter how I arranged my hd drives, win XP loads. I even removed all the drives and booted to see what would happen. Win XP loads with no hd's installed in my PC?? It's almost as if Win XP is within memory in my motherboard or something if that makes any since.
At this point:Only XP loads no matter hd arrangement I am unable to get into BIOS anymore I've tried my del key, F1 and F2 keys when post screen appears. XP is adamate about loading no matter what If I connect either my older win 7 hd or the new hd with win 7, my data is still there but only accessable as a secondary drive (without the hd with XP connected)Can't boot from cd/dvd drive, Unable to access BIOS anymore to select boot from cd/dvd Drive letters are screwed up, current drive in DOS from XP reads (E:Documents and SettingUser Name>) Any drives that I have connected all show in disc management but again no matter the arrangement, win XP still loads?
View 2 Replies
View Related
Feb 20, 2012
I have a Windows 7 upgrade disk and a XP upgrade disk so is there anyway to install Windows 7 from these two disk and a blank hard drive? I also have a windows 2000 disk.
View 6 Replies
View Related
May 27, 2011
i have done a clean install of win 7- 64 bit and it wont boot up, the pc runs but blank screen, i take the new 8 gig of ram out and put the 4 gig back and all is good again.
View 17 Replies
View Related
Jan 13, 2011
i'm trying to upgrade from vista 32 bit to 7 32bit using an official CD. Doing a clean install isnt something I can do b/c I dont want to lose everything on my harddrive. When I do the upgrade I get the error "Windows could not prepare the computer to boot into the next phase of installation." I've tried disabling everything but microsoft services at bootup before installing, but to no avail. The compatibility checker thing doesn't come up with any problems before installation.I've got over 20gigs of space still on my harddrive, so I don't think that's the problem. I've also run the chkdsk utility from the command prompt, but I don't think it found anything.
View 8 Replies
View Related
Jan 5, 2012
I have a laptop currently using Windows Vista Home Premium - 32 bit and I wanted to upgrade to Windows 7 with the Windows 7 Home Premium - 32 bit ISO I downloaded. I can't use the DVD upgrade since my laptop's DVD Drive got broken, and since I saw that it's possible to install Windows 7 using a USB Drive, I decided to try it. But I keep seeing in the internet that this option can install Win 7 by using a "clean install". I still wanted to keep my files in the laptop so I wanted to do an Upgrade instead of a clean install. So I wanted to know if it is possible to UPGRADE to Windows 7 from a USB Drive instead of a clean install.
View 1 Replies
View Related
Nov 23, 2011
I am trying to upgrade windows vista ultimate 32 bit to windows 7 ultimate 32 bit on a computer i built. I've tried custom installation and the recommended installation, but the same problem arises. The problem is, whenever the computer goes to restart, it does not boot back up. So, during the installation, it starts to restart, but does not boot back up, but the machine is still running.
View 5 Replies
View Related
May 5, 2012
I have just upgraded to Win 7 and want to use old hard drive (Seagate 500 gb) as external usb drive. Other drives work just fine in the caddy. However, when I connect this Seagate drive it does not show up in disk management. In device management it does show as USB Mass Storage Device.
View 4 Replies
View Related
Jun 17, 2012
I am upgrading my Hard Drive to an SSD and I was going to do a Clean install of Windows 7 but for some reason I can not find my Windows 7 CD including the case. I have the product key since it is in my computer but I just don't have the disk, What I should do.
View 9 Replies
View Related
Nov 27, 2009
I just performed an upgrade from Windows XP to Windows 7. Despite backing up all documents and settings to an external drive for subsequent, selective reinstallation, the upgrade appears not to have wiped and reformatted my C drive as I’d hoped, but to have ignored all files and folders on that drive, which remains 95% full. Despite the drive’s bloated status, opening My Documents in Win 7 reveals no files or folders. Can any tell me what happened, and how to access and/or remove these old files/folders?
View 5 Replies
View Related
Feb 9, 2012
Since then I have installed a SSD for the operating system and porgrams so just use these drives for back-up and user data. I have another PC that i use for all my main work and photographs which I backup nightly onto one of the HD on my wife's PC 320HD. I have gigabit ethernet conenctions via my router. Also once a month I backup everything to a 500GB portable drive that i keep outside of the house. Problem is as my photo collection grows I am running out of space on the 320HD. So my question is if i want to get a bigger back-up HD should I:a) Buy a large external drive which I just leave permantently attached to my pcb) Replace the 320HD with a larger interanl HD. IF so can I put any old HD into the Vostro or are there so restrictions I need to look out for compatabiltiy
View 6 Replies
View Related
Jun 13, 2012
I'm looking to install a SSD drive for my windows 7 64bit custom rig I have. Currently I have everything on a 2tb internal HDD. I'm looking to keep everything the way it is and just place my windows on the new SSD.My first thought was unplug my HDD, install SSD install fresh Windows 7 on it, change boot up in bios to SSD first, plug HDD back in and delet windows off of it. Another thought was is it possible to install new SSD and move windows folders to it from HDD?My ultimate goal is to not have to reinstall all of my programs and to keep all my current settings.... I'm looking for the most painless and easiest set up of my new SSD drive and to just have windows on it.
View 9 Replies
View Related
Oct 25, 2011
So, I have a i7 2600K system with a solid state disk as the boot drive, and an older (c2008) Samsung Spinpoint F3 500GB drive as the data drive for programs (that I deem as not worthy of the quick load times). The hard drive has given me some errors over time, and I bought a hard disk to replace it (a Hitachi 1TB). The issue I'm having is that the fact that Windows 7 puts a small (100MB) partition on the F3, and for some reason, even though I'm running Acronis 2012, it doesn't seem to be able to clone the F3 over to the Hitachi. I've also tried Drive XML, and for my 2 hour wait, I only managed to acquire a boot error. Thankfully, I've not done anything rash to destroy the data on the F3, but given the fact that I've seen corrupted files in Steam from that drive, I'm not will to trust it long term with my data. I really need to get the data onto that Hitachi, though... Anyone have any advice for upgrading the HDD in a SSD/HDD system? I don't really feel like it should be so hard, especially if I've bought Acronis True Image, but maybe they haven't designed their product to handle this scenario quite yet?
View 9 Replies
View Related
Feb 7, 2012
I have a Dell inspiron 1545 with a pretty measly hard drive of 135gb. I have an old hard drive from another laptop which is 320gb and i'm wanting to upgrade. I have done this before but i just used all the installation disks to reinstall windows and everything onto the new hard drive. This time however, i want to be able to copy the whole contents of my current hard drive onto the new one so that when i swap them over and i boot up the computer it contains the operating system, software and files that are currently on the 135gb hard drive. I presume there is some sort of wires, software and housing that i might need to achieve this. So far i have been pointed in the direction of this software pack (Apricorn EZ Upgrade Universal Hard Drive Upgrade Kit (SATA and PATA 2.5" Notebook Drives) Deals, #EZ-UP-UNIVERSAL - Expansys.com UK) but i was wondering if there was a cheaper way to perform the required task.
I was also wondering if the new hard drive will affect battery life. The new one spins at 7200rpm compared to the old at 5400rpm.
View 1 Replies
View Related
May 18, 2010
Is there any way to do a upgrade from vist to Windows 7 from boot, as I cannot access vista, got damaged beyond repair.
View 9 Replies
View Related
Jan 23, 2012
i accidentally bricked my old motherboard, so I upgraded to sandy bridge with a new motherboard, processor and RAM but now windows tells me it is unable to boot. I have a i5-2500k and a Asus p8z68-v motherboard
View 16 Replies
View Related
Jan 22, 2013
I have an ASUS N61Jv that came stock with 4 GB DDR3 RAM. Everything else is stock on the system except for a 500 GB Seagate Hybrid drive. I'm trying to upgrade to 16 GB (2x8 GB) and my install of Windows 7 Pro 64-bit fails at the loading windows black screen and reboots. "Attempt Repair" option fails, as well as trying to load the setup disc. I made sure UEFI setup in BIOS is disabled so as to not effect the Windows 7 boot disc.I would start to think it's a hardware issue, but BIOS recognizes 16 GB and I can boot into Ubuntu 12.10 (dual boot setup) and look up with an app that reports 16,xxx MB of RAM so I see Ubuntu can pretty much recognize the new RAM sticks as well.
View 7 Replies
View Related
Sep 7, 2010
I'm running XP pro and would like to know if I can use a Win 7 pro upgrade DVD to make a dual boot system.
I would not be keeping it that way for long but I'm not happy going completely over to Win 7 in one go
View 9 Replies
View Related
Mar 15, 2012
OK So to begin Im upgrading from windows XP Professional.. Before I decided to up grade I ran into this error on my PC: C:windowssystem32configsystem missing or corrupt
I tried the recovery disk and pressing r and typing in the commands in microsofts website and it said: access denied (or something along those lines) Ok so I gave up on that and when I start the computer I can go into BIOS and everything but as soon as it hits the screen where "windows didnt start last time, safe mode, blah, last known good configuration. If select any of them it freezes and if I allow the countdown it usually goes to a white / black screen and says that error up there ^^.
We couldnt get it fixed so I decided that I would upgrade to windows 7 and I purchased it online and downloaded it and it WILL not work with the computer. I go into BIOS and set CD/DVD first and press a key to boot from disk and it just restarts as soon as it loads and keeps redoing it. Occasionally Ill get a " the file is possibly corrupt, the file header checksum does not match the computed checksum.
View 9 Replies
View Related
Jul 24, 2010
Yesterday I upgraded one of my computers from Windows Vista to Windows 7. After the install completed and the computer restarted, it shows the Windows 7 "Starting Windows" screen and then loaded a black screen after that, and after a long time with the harddrive light blinking, the computer restarted itself and then stuck at the same black screen again.
I tried putting the Windows 7 disk back in the computer and running startup repair, but it said it found no problems.
View 9 Replies
View Related
May 18, 2011
I have used windows 7 for some time now and am qjuite happy, however.I just recently upgraded to the latest verson and now my HP tablet 64 bit amd turion wont boot.
View 1 Replies
View Related
Aug 1, 2012
I have upgraded a machine from an Intel motherboard to an ASUS P8H61-M LX. New CPU and RAM. Before installing the new hardware I changed all drivers to standard drivers, did a system image to an external HDD. After installing the new hardware Windows hangs with 4 little colored dots on the screen (start of win banner?). A safe mode boot stops at classpnp.sys. The same thing happens if I try to boot from the WIN CD. I went back to the old hardware setup and tried to do a sysprep, but that failed with fatal error, but no more info. The HDD is set to IDE, using a PS2 mouse and keyboard. I cannot do a clean install as there is some very old software on the machine.
View 1 Replies
View Related
Nov 2, 2011
I have an Acer Aspire M5100 Desktop that was running Vista 32 bit. I tried to upgrade to Windows 7 and am now stuck. I think it is either a problem with BIOS or with an incompatible graphics driver. After the upgrade process (I did not do a clean install), when the computer rebooted for the last time, the screen went black and it it did not advance past a certain point. The error message read, cannot boot from CD.
Since then, when I turn on my computer, the screen goes to black. That's it. If I push delete, I can access BIOS. Even when the boot priority is the CD Rom, nothing happens. I cannot access a GUI to make changes to drivers, etc. With all of the known incompatibilities this computer has with Windows 7, it probably would be best to return to Vista. Ideally, without a clean install because of all the software and files on the computer. But I understand a clean install might be necessary.
How do I use my Vista recovery CD when there is no GUI accessible? Can I do this through the BIOS menu? I am not good with command prompt coding, so if that is mandatory. Unfortunately, I do not know the exact computer specs, again because there is no GUI. The best I can do is this Acer website: Acer Support: Aspire M5100 Specifications.
View 4 Replies
View Related
Aug 16, 2010
I am trying to perform a clean/custom install of Windows 7 Professional 32-bit on my VAIO SZ-650N. I have the upgrade disc and though its primary purpose is to upgrade from Vista to Windows 7, it is confirmed to work with clean installs as well. Since I want to perform a clean install, I must boot the installation from the disc and not within the OS. The problem is that when I insert the disc into the drive and start up the computer, it'll pause for a moment longer than usual, as if it detects that the CD is there, like I can hear the disc spinning in the drive, and this little gray underscore will blink on the screen, but it will never give me the "Press any key to boot from CD" message and it'll eventually just load up my OS.The disc is in perfect condition and I can view its contents and run it from within the operating system...I just can't boot from it. Even the directions for clean/custom installs that come with this disc say that it must be done from the disc, not when the OS is loaded. The problem can't possibly be my BIOS startup order, because first of all the disc drive is selected to load first thing and when I insert other bootable CD's such as my beta copy of Windows 7, I can boot from it fine.
Edit: It will not let me do a custom install from within the OS regardless because it is unable to detect any drives/partitions to install Windows 7 onto. And the "advanced" option isn't there...I'm guessing because it's impossible to wipe the drive clean when the OS is already loaded.
View 2 Replies
View Related
Apr 15, 2012
My toshiba c650 laptop recently acquired a virus and now it will not boot. I was running windows 7 home premium 64bit at the time with ubuntu 11.10( I think) my computer crashed while I was running a mcafee scan and has not booted since ubuntu also does not boot due to the windows 7 system failure. Any way I was wondering if I bought a windows professional 64bit upgrade, could I Install it from boot? I also need to know if it would wipe all virus's from the hard drive. It would be best to mention that I have tried safe mode, safe mode with networking, my recovery discs and a blue screen repair discs all that happens when running these is a black screen with white cursor I left them all for an hour to see if anything happens but sadly nothing does.
View 8 Replies
View Related
Jun 22, 2010
I have a dual boot scenario currently on an Intel 80GB SSD, with one partition as XP Pro, and the other is Windows 7, split 20GB(XP)/50GB(7).
The XP partition needs to be upgraded to Windows 7 for my wife's work remote access, and it will also include Office 2010 Pro.
Will I run into any issues dual booting into the existing Windows 7 partition after the upgrade, or should I just reinstall our personal Windows 7 OS after the upgrade is installed?
I have other hard drives to use as well if space becomes an issue, but I'd like to keep the existing Windows 7 install without starting from scratch.
View 9 Replies
View Related
Oct 19, 2012
I have a drive on a desktop that had XP on it, and I removed the drive, and formatted it. When I try to install Windows 7 to the clean drive, it says windows is installing everything, but all I get is the splash screen, and nothing else, no files or anything. I have tried this a number of times with the same result. I have an ASUS motherboard. (A8V). 2 GB of memory. The hard drive is a 500 GB Seagate I got about 11 months ago.
View 2 Replies
View Related
Apr 19, 2012
I would like to install Win 7 to a new Hard Drive. I have the Win7 Upgrade CD. I have XP running on an old HD that came with the original PC. how I can do this?
View 6 Replies
View Related
Dec 27, 2011
i just bought a 60GB crosair force3 ssd. i connected it as usb drive first and set it as an active partition, and formated it. then i took off my HDD and replaced it with the SSD. then windows installation did not detect my the SSD. i went to bios and i saw that the drive is being detected as a primary slave. its a sata so no jumpers needs to be changed... do you guys know of any other methods i could try to
View 6 Replies
View Related
Jan 6, 2010
I have a Kingston 4 GB usb pen drive, I am able to store large files (>50MB) on computers running on xp.However, pen drive unable to store large files (>50MB) on computer running windows 7.No problem reading from usb, but when i write data on it , stops midway and usb drive disappears. Have formatted drive with both fat32 and NTFS, scanned fo errors, scanned for viruses but no improvement.
View 5 Replies
View Related
Oct 22, 2012
I have ordered an SSD drive that should arrive at the same time as Windows 8 is released later this week.
I want to install the SSD drive and do a clean install of my PC OS at the same time. I intend to keep my HDD for saving photos etc.. What is the best order in which to approach this?
I was thinking I could:
- re install Windows 7 on the SSD, format the HDD and then buy the Windows 8 upgrade
OR
- buy the upgrade before installing the SSD and create the upgrade installation DVD. Install the SSD drive, boot up from the HDD and then use the clean install facility on the Windows 8 upgrade DVD to install Windows 8 onto the SSD and reformat the HDD?
View 1 Replies
View Related
