Windows 7 Unable To Access "Local Uesrs And Groups"?
Oct 30, 2011
I tried to google for this phrase : windows 7 unable to access "Local Uesrs and Groups",,,,but all I found is related to XPMy issue is I have a standalone windows 7 ultimate 64 bit, "Local Uesrs and Groups" has a read cross on it Can't access "Local Users & Groups"- The error was: Invalid syntax - Petri.co.il forums by Daniel Petri Q. When you attempt to access the Local Users and Groups snap-in in Windows 2000 you receive 'Error loading type library/DLL'?From the cmd I run sfc /scannow the result was :Windows Resource Protection did not find any integrity viola
why, when connecting wirelessly under Windows 7, to a wireless access point I am unable to change the "Network Type" from Public to Home, thus no connection to the Internet is allowed? I cannot change any of the parameters of the network at all. Under XP on the same network I have no problems at all.I have set up three access points by simply adding additional wireless modems (of the same brand as the primary modem), turning off DCHP and U PnP and assigning a unique IP address, to avoid DCHP conflicts (as I understood it).Which change would I have to make to the access points such that Windows 7 fully recognises each access point and allow me to assign them to type "Home"?
So, I had to send my original schoolcomputer in for repairing. My, very rude, I might add, IT-staff at school did not include local admin for the temporary computer. I did try to ask him for local admin, as I need to change certain network-settings in order for my update my network-drivers.When asking the IT-staff for local admin, reasoning with the fact that I cannot access the internet properly due to the drivers not being uptodate, they simply wrote me off, saying that I didn't need it. They did, however, challenge me get local admin, claiming that they wouldn't care as long as I didn't cause any harm to the computer.I have a normal local user, connected to the schooldomain. It is still connected to the domain-name after leaving the schoolnetwork, where my username is DOMAIN\username. I am not able to access BIOS, do any changes in group policy or system32, and naturally, all the CMD-commands we did at junior high when we were twelve does not work. The BIOS is set to automatically boot from the HDD; thus any tricks involving .iso files and CD/USB-drives will not work.
I will cut straigh to the point! I am wondering if it's possible to set up a VPN to connect to a PC on another network so i can access the other machines on that network. e.g If I have an office with a router and 1 pc connected to the internet and 4 more machines conected to the router but not going out to the internet. Is it possible to connect to that machine via VPN so then it would be as if you were on that network to then be able to access the PC's on the network?
We have a scenario where a number of developers residing on a less secure network have access to Windows 7 virtual machines. Access is via the standard RDP protocol. In the domain that these machines reside we would wish to set in group policy access to the local machine USB devices. However, we would also wish to ensure that we block access to the local drives on the client. Looking through group policy are able to block acccess to all local devices channels but cannot configure or find solution where we can just access the USB (removable media devices). Looking through forums it appears that this is only available on Remote Desktop Services for 2008 R2 server.
first my hard disc crushed, now after formating the local C, my local D which is very important to me because that is where all my projects are says i need owners permission to open, i have tried all day long but till now only a pile frastration
I have just reinstalled Windows 7 64 bit and it won't see my local network. I'm running a hardwired network, my switch is a netgear RP614 set to act as a dhcp server. I had the 32bit version of windows 7 installed and that picked up its network address fine to start with and then just stopped working. I have tried hardcoding the ip address onto the network card but that makes no difference.My xp machine connected to the same network works fine.
It appears that windows 7 isn't picking up the ip address from the dhcp server as it should. it gets a default address of 169.254.107.37 whereas my network is 192.168.0.0 I have put in the default gateway and the dns server addresses that my isp uses but this makes no difference.
I have tried turning off the dhcp flag as recommended by microsoft in case that is the problem but that made no difference and it was working under 32 bit for a while without the flag turned off.
I have installed the nforce drivers in case it was the windows drivers causing the problem that made no difference. I have run a network capture and that shows that it is seeing the dhcp packets from the dhcp server.
I have done everything I can think of and everything I can find recommended by Microsoft but all to no avail. Any help with this greatly appreciated as I really like windows 7 and don't want to have to downgrade my system.
I have this problem in which, windows 7 basically locks up the hard drive. Start > Computer > Hard Disk Drives(1) > Local Disk (C: >"Location is not accessible - C: is not accessible - Access is denied."I can access other parts of the hard drive like c:usersetc... but other than that I just can't open drive c: from anywhere or any command, and even in cmd.I have included some pictures.one thing I did notice is that there is no window icon on the hard drive, on my desktop, the there's a little windows icon, on top of the local disk drive c: on top of the share drive icon in the windows explore
i have big mindf*** going on here..i have 3 computers,
A - Windows 7 ultimate x64 (PC) (LAN connected) B - Windows 7 professional x64 (laptop) (WLAN connected) C - Windows 7 ultimate x32 (laptop) (WLAN connected)
Theyre all connected on the same HUAWEI B260a wireless gateway, and theyre all under the same workgroup and connected within a homegroup Standard shared public libraries (music, picture..) are visible and accessible for all of them with each other.PROBLEM is @ network location
1) when i access from computer A to comp's B hard drive partition its all ok but it cannot access shared partition on computer C (but its visible)
2) computer B cannot access either one of their partitions
3) computer C can access everything and all All of the HDs partitions are shared?
how can i share my PARTITIONS and make them accessible for each computer without having permission troubles?ive even assigned static ip adresses for each computer (though they comunicate with each other ok so it wasnt necessary to do that)ofc, partitions are shared, FWs are disabled, all of the necessary services are enabled, there are no AVs blocking traffic - but because of line under * stated above, nothing of this is actually important?
Stuck with my local area connection problem.I can not access my internet,under networks options there is no local area connection or any thing like that.I have also tried to format my computer to fix the error but no success.I have also tried to uninstall and then install the drivers but it was of no use but when i troubleshoot the it says the drivers are not installed properly.
Last night I was on the internet at home absolutely fine and my laptop automatically downloaded an update, since then I have been unable to connect to my wi-fi. I deleted the updates and was still unable to connect, so I tried to used a system recovery restore point and every one I use starts but fails to complete.So, I did a factory reset after around 8 hours of trying to sort it out today and I STILL have the same problem. I can plug in the cable to connect and my housemate is having absolutely no issues connecting and neither is my phone so now I am at a total loss what I should do to resolve this. Prior to the factory reset I was able to connect to the wi-fi but it was stating no network access/limited access and now it simply won't connect to my internet at all. It finds my full strength signal but will not connect.My drivers for the Broadcom 4313 802.11b/g/n card are the most up to date and the laptop (HP G62) says it is working fine.
I am running win 7 and my LAC says "unidentified connection" no internet access. I can still connect wireless to other connection. I am running comcast broadband connection through a marvel yukon ethernet. I can't get my work done from home anymore!
I just moved to Peru for my study abroad. When I first connected to the wi-fi in my homestay I was successful. Suddenly, I cannot get internet access and it says it is an "unidentified network". I have tried manually inputting IP addresses, DNS, etc. I have tried forgetting the network and disabling my virus protection. I can't even get internet when I plug an ethernet cable into my computer, directly into the router. My laptop is the only thing that isn't working, other people's computers work and my iPod and smart phone work with the network. I have a Lenovo Windows 7 PC, running Windows 7 Home Premium 64 bit.
Above is the error that comes up after I troubleshoot this issue. okay so to start off let me say the things I have done.
1. I have restarted my computer multiple times and restarted the modem and router. 2. I've checked my services to make sure that that weird code is not there and it was not.
This problem just came up recently and had no issues with it before and this computer has been running for over a year.
I've had an extremely frustrating day trying to connect my WDTV Live to my desktop? I connect to the net through a wireless connection to my router. Because its in the other room, I can't connect my WDTV Live to the router without running cable along the floor. Having said that, its not far away from my desktop PC, so I'm trying to connect them directly via cable. The problem is that my WD keeps telling me that it can't obtain an IP address and I don't know how to fix it or what values to put in.
Windows IP Configuration Host Name . . . . . . . . . . . . : JoelsDesktop Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid
The OS installed some updates, and after re-booting and logging on, I got an error when one application that tried to start up failed to access my local temp file. I have local administrative permissions. I changed my temp folder environment variable to point to a different location, but this is the second time this has happened (first time was on different machine). "Cacls Temp returns Access is denied". I can't take ownership or anything of it.
I was just wondering, as I'm not that familiar with intermediate features of non-NOS windows releases. I noticed that when you log into different computers on the home network, they are still prefixed with a domain (the computer name/hostname). Is there a way to put all of my home computers on the same "domain" ? Of course, I mean to do this without the use of a server/domain controller.
I know that windows 7 has homegroups,ut i'm not sure if this will work the same way.
Basically my ethernet capability flew out the window ranomly the other day. Wireless works perfectly however.. before ...the other day.... it has been working solidly for almost a year Im plugged into a router which is running off my cable modem, both sitting less than a foot away from me. Also hooked up to the router is another computer, and my xbox the xbox works but the other computer cant seem to get a local connection either.
at first i assumed they were having an ip conflict of some sort, but why now after all this time?
I have tried:
- ipconfig /release - /renew - abolishing bonjour - taking the other pc completely off the router/network - updating drivers.....rolling back the updates - different cables different ports -plugging directly into the modem - and asking nicely
im on my laptop, Dell studio also the first time i noticed this happen was directly after having powered down the modem and router.
below is the ipconfig Microsoft Windows [Version 6.1.7601] Copyright (c) 2009 Microsoft Corporation. All rights reserved.
I'm creating a local group policy to lock down a Windows 7 Pro Workstation for use in the Staff room.It's the first time I've used it, previously I've worked a bit with AD. but I've been following on line tutorials and using google and I'm nearly there with it.But I'm stuck on one thing. My approach has been to remove access to pretty much everything apart from IE, Firefox and Skype icons on the task bar. I've got the start menu empty apart from the shutdown button, which is what I want but at the top of the start menu is the users icon/picture thing and if i click on it it takes me to "user accounts". I can't for the life of me work out how to get rid of the picture or just stop this happening.
i am having problems connecting to Xbox live because it has no internet access and i have tried lots of things and nothing is working. here is the story behind it.... i had tried connecting many times before but it wouldn't work but one day i tried and i changed sharing on something (IDK what i forgot) and it worked so i had live for a couple of days. then one day my bro was online and the power went out in the house for a while, the next day i tried to connect and it wouldn't... on the when i plug in xbox ethernet to computer
I have set up a large group distribution list of about 150 email addresses. I'm certain some are bad. What's happening is that when I try to send to the group the bad email addresses are preventing the message to go through to the good emails.
Just got a new laptop and am getting to know Windows 7! I have used outlook express for years and was bummed to find out it no longer existed. I found windows live mail 2011 on my laptop and have imported my csv address book. My problem is creating groups. I am not using hotmail. I use gmail.
I am using Win 7 64bit. I am unable to get to Facebook (and Mozilla, probably many others) through IE 9, Firefox, and Chrome.
If I use Win XP, I can access Facebook from all three browsers. I have tried multiple PCc/Laptops and the same thing happens....it works in XP but not in Windows 7 x64.
If I run an XP virtual machine within the Win 7 machine, I can access Facebook.It seems to be something with Win 7 64bit (maybe 32bit as well?)
If use a web proxy like HidemyAss.com I can at least bring up the Facebook login page, though cookies become an issue.
I have followed multiple suggestions from other sites i found such as clear cache, DNS cache, resetting TCP/IP stack etc.
I have a canon lbp 3300 printer attached to a windows 7 system. Recently i changed its user access configuration through device and printers. But now i am not able to access this even in administrator account or in any account having admin privileges.
I have 2 computers a desk top with Windows XP a new Sony laptop with Windows 7 Try as I might I cant get past the Play button when I go to the [URL] site All I get is blank page when I click on the Play button?
This same problem happened about 1-2 months ago on the first user profile on the computer. My cousin and I searched google and all we could find was deleting 1 of 2 registries or something along those lines, we tried and it didn't work. Since the problem seemed like a one in a million shot, we eventually settled on copying the contents of the other user profile into a new user profile through the hidden administrator account. We just used that account instead. The other account is still on the computer as well
