Windows 7 Stalls At Starting Windows?
Feb 24, 2011
this computer has been working fine. i did notice a windows update installed last night before i shut down. i let it install fully.
today the computer stalls at "starting windows" for about 10 minutes before it starts. I loaded the latest bios. I disconnected all usb devices. I had windows look for any system errors and found none. I don't know what else to try.
asus p6x58d-e
windows 7
24 gig ram
i7 950
GTX-470
antec 1000 watt power supply
nec pa271w monitor
no other cards or devices
View 4 Replies
ADVERTISEMENT
Sep 12, 2012
First time I've ever booted windows 7, it started up in literally 15 - 20 seconds. Now it takes about 2 minutes and stalls at the "starting windows" screen for about 1 minute. I'm not sure why this is happening.
View 12 Replies
View Related
May 15, 2010
I decided to upgrade my Dell 1525 Inspiron laptop from Vista Home Premium (32 bit) to Windows 7 Home Premium (32 bit). I bought the Dell disks and ran the upgrade assistant first. It told me to uninstall two programs - which I did. I should say I do not want to do a clean install for two reasons (1) there will be so much hassle in re-installing programs, files etc. (2) people on the web who have this 63% problem report a clean install aslo fails at 63% and they are even worse off then before!i have now tried four times and each time it fails at the last hurdle at 63% when it is transferring files back to the system. A search of the net will show that several people have experienced the same problem (there is also one at 62%). After my first failure I tried the tips of unplugging the LAN/Internet connection; inserting MIG-UPGRADE-UGBIRE-PLUGINS etc.; I disabled most things in the startup list but each time it failed at the 63%. I left it running for 7 hours over night just in case the 63% needed time to sort itself out but it made no progress.I don't have any unusual software - Kaspersky Internet Security, Mailwasher (which I disbled during the last attempt) and a Western Digital external hard drive (which I also unplugged and disabled during the last attempt). [code]
View 9 Replies
View Related
Feb 16, 2012
About a week or so ago we had a big storm that knocked the power out a few times... my computer rebooted each time and after the second time Kaspersky detected a "memory mode kernal" or something like that (I accidentally deleted it from the list) and stated it had the same pattern as Klogger or something like that. I thought it was odd but after those restarts programs started to open slower on my computer than normal and sometimes I could see at the top of the program it would say 'program not responding' or something along those lines. This has mostly happened with Furcadia and Firefox but other programs like Adobe Elements come up slower than normal and even Windows 7 sticky notes come up slower.So what I have done was rebooted in safe mode and ran scans with both Malwarebytes and Kaspersky (with no problems to report as far as malware/viruses), ran CClearner, then ran defraggler (in normal windows). The problems seem to have gotten worse so I did a Memtest86 scan to see if it was my memory... no errors were shown (Memtest86 was ran after the most recent update to windows). So I still have some of the problems but for some things not as bad or just about the same as before. However, with my last reboot my computer had stalling problems.. it was trying to install the drivers for my new keyboard and load everything else (including NVIDIA System Monitor, Internet connection, Kaspersky, adobe reader update message, and windows action center [maybe something else too, I closed some of that stuff afterwards]).
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Professional, Service Pack 1, 64 bit
Processor: AMD Phenom(tm) II X4 945 Processor, AMD64 Family 16 Model 4 Stepping 2
Processor Count: 4
RAM: 10237 Mb
Graphics Card: NVIDIA GeForce GTX 465, 1024 Mb
Hard Drives: C: Total - 343296 MB, Free - 276222 MB; E: Total - 476937 MB, Free - 445652 MB;
Motherboard: Gigabyte Technology Co., Ltd., GA-MA785GM-US2H
Antivirus: Kaspersky Internet Security, Updated and Enabled
View 2 Replies
View Related
Oct 11, 2012
I am trying to re-image a laptop but both with a USB or a CD when it is loading up the install it just gets stuck with the loading graphic just going and going and going....I've replaced the hard drive on this laptop already, but I've used the same CD and USB to re-image other PC's.
View 2 Replies
View Related
Dec 26, 2012
For the past month, every time windows update automatically reboots my computer to finish the updating process, the computer shuts down, fades to black, but then something curious happens. Instead of the BIOS coming up, the screen remains black, and every single fan in my system (GPU, CPU, and 3 other case fans) spin up to full speed and remain there, with the pc never rebooting. I thought this was a BIOS issue, so I updated my BIOS, but this did not fix the issue. All my drivers are updated, and there are no yellow exclamation marks beside any items in Device Manager. My system is running 64 Bit Windows 7 Ultimate, SP1.
View 2 Replies
View Related
Dec 16, 2012
A custom RT7Lite disc was used and a lot of tweaking has been done, so the system is well in need of a fresh format. Unfortunately, this was planned for after the holidays, and as I was unprepared for this crash, it could take me longer to figure out what I need to transfer to a new install then it would to fix the current one.
System specs:
OS: Windows 7 Pro x64
CPU: Intel Q9550
Motherboard: Gigabyte EP45-DS4P
Memory: 8GB PC2-8000
Graphics Card: ATI HD4870 (PCIe/512MB)
System Drive: 2x Intel x25-V SSDs in RAID0 (via mainboard's ICH10R)
Network: Intel Gigabit CT PCIe card
Firewall: Outpost Pro
The current problem:
System passes POST, bootloader, "Windows is Starting" animation. USB devices initialize, and the mouse pointer appears. The screen remains black (no background, login dialog, accessibility/power buttons, etc.) indefinitely. The mouse still moves and NumLock can be toggled, so the system has not halted - it just doesn't get any further than that. After 15 minutes power-saving kicks in and the display goes to sleep - Moving the mouse or pressing a key turns it back on again as though everything is normal, but it's still stuck at the black screen.Events leading up to this:I have been using a PCIe JMicron-based SATA card with a broken eSATA port, and I recently got an ASM1061-based SATA 6Gbps card to replace it. This new card is PCIe 2.0 and my motherboard only has two 2.0 slots - the x16 and x8 slots meant for video - so I was testing what difference it made running my gfx card in x8 mode. I decided running it this way was OK, so I started tweaking the SATA card. I had seen reports that using the generic Microsoft driver with this chipset was hugely detrimental to write performance, so naturally I tried to install the newest ASM one. This didn't work, as Windows told me "this location does not contain information about your hardware". I resorted to using the driver's installer program, which ran perfectly - but Windows kept using its own driver anyway.
Finally, I decided to try the older version of the ASM driver. This installed properly and the device was no longer listed as a generic ATA controller. On a hunch, I tried updating the driver again (without rebooting) to the newest driver, and Windows accepted it with no complaint this time. However, my firewall (Outpost) asked me whether I wanted to allow direct disk access to an uncertified/??? driver. I affirmed this as it was intended. It's worth mentioning that Outpost was being a nuisance when I was testing PCIe slots, as it wiped its configuration file each time I moved my NIC. This meant it lost all the rules regarding which system components were allowed to do what, and had me confirm each one.
I then rebooted to MS-DOS on a USB stick to update the SATA card's firmware. I restarted into Windows several times without issue, but the SATA card didn't show during POST or in the Device Manager. Turns out the uploader mislabelled a BIOS OROM module as the add-on card's firmware. Back in DOS, I flashed the correct/original file, but the card still didn't seem to work (no BIOS info page, still absent in Windows) so I went back and flashed it a third time. After that theBIOS splash screen re-appeared and it seemed like everything would be fine.
However, upon booting into Windows, I was now getting a consistent BSOD: STOP 0x00000024 0x0000000000190494 (I only have the first two numbers, which I googled on my phone out of curiosity). I rebooted to safe mode and the same BSOD came up after CLASSPNP.SYS was listed. At this point I inserted my Windows DVD and ran the Startup Repair function, which took a while but completed successfully. I checked the log after it was done and the only reported issue was that the 100MB System Reserved partition was "corrupt". After restarting, the BSOD is gone but I now have this black screen/no login issue.
Things I have tried:
-Pretended the login screen was there (entered password and pressed Enter) in case it was a graphical glitch.
-System restore is disabled so I can't use that to revert whatever caused this.
-Tried booting in each of Windows' alternate modes (VGA, Safe, Safe w/LAN, Safe w/CMD, Last Known Good, etc.), problem persists.
-Unplugged secondary display in case it was drawing stuff on the wrong monitor.
-Shuffled the expansion cards back to where they were when the problem started, tried alternate locations, booted with all cards removed.
-Opened a command line window from the Windows 7 DVD and ran SFC and scandisk. SFC reported there were several errors that could not be repaired, however this was also the case several weeks ago when I used SFC to troubleshoot an application. I'm fairly certain this can be blamed on the RT7lite'd install source.
-Booted into an old install of Vista x64 Ultimate on another drive, and replaced all instances of the ASM drivers with the older version. No change. Went back into Vista and renamed the driver files - no change.
Brainstorming:
-Non-destructive "Upgrade" install over existing version Has to be done from within Windows 7. Tried initializing this from Vista, but it seems it can only be installed over the currently active partition (and can't be done anyway because Ultimate trumps Professional.)
-This xbootmgr tutorial helped me narrow the timing of the problem down, it seems to be happening in the SMSSInit phase of MainPathBoot... Knowing this hasn't really helped me so far and it appears xbootmgr has to be initialized from the OS being traced, so I'm not sure if I can even use this tool.
-The automatic Startup Repair script (on the installation disc) reports that the system booted successfully. Running SFC without the /offwindir and /offbootdir switches reports that a system repair is pending. The bootloader lists the OS as "Windows 7 (recovered)"
View 3 Replies
View Related
Oct 21, 2012
Very slow operations like Start button, start an application, switch between windows. Sometimes stalls completely. Sometimes freezes so I have to go with power button. When inside an application - not so bad. I am having this PC second hand for about a year, getting worse gradually. AVG antivirus and tuneup say all is fine.
HP Pavilion a6207c
Windows 7 64
View 14 Replies
View Related
Sep 21, 2012
My laptop has been backing up once a week fine (except for an error about a missing file that is on the target drive, not the backup drive) for months. In the past few days, it has suddenly failed with repeated attempts to backup, it always stalls at 57% while creating a system image. I've tried a clean boot, same results. I'm backing up to a network drive (USB hard drive attached to the router), 274GB free of 458 total, and the total backup size has been pretty small as no heavy data is kept on the computer.
Lenovo SL510
Windows 7 Professional
View 1 Replies
View Related
Jun 5, 2012
I own a Toshiba Satellite L645D-S7040, when i use my Laptop it will completly freeze randomly without any reason or warning. when it freezes nothing will move (mouse) and the is frozen in time. any program that was runing at the time is also frozen in the middle of what ever task it was doing. like if i was watching a video it would make a high pitch scream until i restart it. normally it freezes after 10 to 30 minutes after start up and at time it could take hours to days to freeze. After the freeze i check the event logs and the only thing posted is the fact that i shut it down. i even did a factory restore and it still does the freezing. and yes windows 7 is the stanfard OS i the laptop. it is only about 14 months old. i am thinking of buying a new hard drive but i would rather solve the problem then buy a hard drive.
View 1 Replies
View Related
Aug 23, 2012
I have Windows 7 home and have run into a bit of an issue. I have a program on my computer that runs through the internet. At my home, it connects fine and I am able to run it without any issues, but I go to school and connect to their WiFi and it stalls on the connecting prompt. Everything else I run and the internet works fine, I have re-installed the program and made sure it wasn't blocked from public access on firewall.
View 1 Replies
View Related
Oct 28, 2011
Soo its an Acer travelmate 4000 laptop, 1.6Ghz, 2gig ram, clean hard drive with two partitions , primary is 30 gig , secondary 120 gig.Windows 7 home prem OEM 32 bit It gets through the first part of the install (up to the first restart) then goes on to the screen shown in part 9 of the clean install guide, highlighting the "completing installation" message Clean Install Windows 7 then stops with the progress bar about 3/2rds of the way. The drive light flashes occasionally, but otherwise nothing,I formatted and partitioned the drive in another machine.
View 9 Replies
View Related
Jun 17, 2012
My computer specs:[CODE]I installed windows 7 ultimate 64bit on the hard drive with a different computer. But when I connect it to this, it freezes and stalls at the windows 7 loading/logo screen, and restarts.It is frusrating because i cannot use the computer
View 5 Replies
View Related
Dec 21, 2012
My game stalls when the screen goes white and an exclamation mark appears in the windows 7.
View 2 Replies
View Related
Aug 13, 2012
When I have firefox open as it seems, is when the problem arises. My computer will stall for 10-20 seconds making it completely unusable for that time frame, then it will come back. I upgraded FireFox to 15 (Beta2) I removed Adobe Flash (latest version) and installed it again, the problem continues. I did a memory test, because I have had a BSOD roughly twice in the past 1.5 weeks, the memory results were good. I did research on Adobe Flash and found that there are problems with the latest version, and sometimes a Adobe Flash app on a web site will crash. When I've had no web pages open in FireFox, it will happen as well ? I can't verify if I've had this problem when FireFox is closed or not as there wasn't many times in which I didn't have FireFox open whether minimized or the window open.
View 6 Replies
View Related
Sep 17, 2012
I've done a search for issue and found none. I have a 2 Terabyte Seagate USB drive.When I try to boot with this USB drive connected to computer the POST hangs. Once I remove the USB drive the system boots as normal. My system also has a USB RF Transceiver for the keyboard and mouse. It causes no problem though just the drive.
View 9 Replies
View Related
Jul 3, 2012
My little netbook has started to stall for several minutes on boot. It seems to be related to the network setting or adaptor. I am not really sure how to log this, or diagnose. Nothing shows up in the basic troubleshooting etc. Do not know what info is needed. It works fine in safe mode btw.
View 1 Replies
View Related
Jul 7, 2011
I can't seem to figure out what's going on with connectify. No matter what computer or wifi adapter I use, connectify seems to just stall and stop working. I have waited for upgrades to be released and it still does the same thing.
View 9 Replies
View Related
Feb 16, 2012
When I do a "restart", on the computer screen I could see "log out", a few seconds later, "shutdown." At this point, the system stalls at "shutdown." I waiting for over 5 minutes, and it was still stalled at "shutdown." To continue working with my computer, at the ""Shut down stall", I remove the power cord from my computer. About a minute later, I reconnect my power cord and click the power button. After that there is no problem. Except when I do a "Restart."
View 3 Replies
View Related
Apr 10, 2012
For the past few months I've been having an issue where every 15-30 minutes my laptop will "stall" while browsing the web. I'll get a "waiting for [URL], etc message at the bottom left corner of the browser when it's stalling until it eventually times out and tells me it can't load the page.This issue occurs with every browser I try (IE, Chrome, Firefox). After a couple minutes, everything comes back to normal and I can continue wasting time on the internet until the next hiccup.
My set up is:
A Gateway NV57H58U Intel Core i5-2430M
Windows 7
Comcast digital cable
A Belkin Wireless router
A PS3
At first I assumed it was the router since it's a couple years old and was cheap when I bought it back then.The only thing that makes me think differently is that when I'm using the PS3 I never experience a break in connection. I can play a game online for 3-4 hours without any crashes or stutters.Also, while the internet is stalling out there is never a disconnect from the router - it always says it's connected and the signal strength is always "Excellent."
View 2 Replies
View Related
Nov 24, 2011
since I have installed windows7 it seems I have lots of errors trying to watch streaming on my laptop I noticed mass controller explanation point next to it does this effect streaming video?
View 2 Replies
View Related
Mar 11, 2012
App takes a long time to load and generally runs slow when in use. As far as I know it was designed for Vista 64 bit. BTW the cmd "cscript adplus.vbs -crash -nodumponfirst -minionsecond -quiet -pn dpeg.exe" needed to be changed to "cscript adplus_old.vbs -crash -nodumponfirst -minionsecond -quiet -pn dpeg.exe".
View 5 Replies
View Related
Apr 1, 2011
Suppose for a minute that you've used windows update and now it has the little shield over Shut Down, indicating that when it shuts down it will install updates. Now suppose when it tries to shut down it cannot install the update and stalls on "Reverting changes". Suppose you are lucky enough to be able to manually restart your computer and everything is fine, but the little shield is still over shut down. Is there a way to remove the updates you have installed before shutting down?
View 4 Replies
View Related
Feb 1, 2012
I bought this laptop on 1-7-12 from best buy with the geek squad setup (laptop i wanted but they only had it with the set up). I have been trying to use the factory partition on the hard drive to restore back to the factory setting but it stalls at a number of certain points. If I start windows normally it stalls at "Setup is Starting services screen" it never freezes completely it just never progress after 2 hours. I also had it freeze at installing new devices 46%. It also has failed at the "Factory Installation in progress do not operate..." I know this process restarts the computer multiple time but after one of the restarts it came up with a very big error text with red coloring. I have used the geek squad restoration discs also and it got caught up on the same points.
View 1 Replies
View Related
Oct 14, 2011
My laptop stall for about 4 minutes with this message: "Checking file system on\?volume{70449451-e00a-11e0-8f51-806e6F6e69633. The type of file is NTFS. The Volume is Dirty. Corrupt Master File Table. Windows will attempt to recover Master File Table from disk.
View 1 Replies
View Related
Oct 29, 2011
PC don't showing bios display on starting & start showing display after starting window
View 1 Replies
View Related
Sep 22, 2012
Having an issue with windows 7. I few days I ago it starting just randomly rebooting. Then on reboots it started going to a black screen.I ran my dell diognoatics and it says all the hard ware is ok. Popped in my win 7 disk and ran my startup repair.Now windows 7 is loading, but now of the desktop icons responds. If I hover the arrow over the windows icon in the lower left corner of the screen, I just get the spinning blue icon? Nothing responds.Can I reinstalling wimdows without it deleting my c drive? Running win 7 home n a dell xps 8300.
View 2 Replies
View Related
Jan 21, 2013
I recently installed poweriso and magicdisc on my computer then I rebooted but windows started to hang at shutdown so I just forced a shutdown, now windows is hanging up upon restart and the same happens for safe mode. I'm thinking the problem might be magicdisc cause it said drivers were not found and safe mode was hanging around the loading drivers part or that I made a virtual drive.
Also I'm attempting to do a system repair via windows disc
Edit: Windows repair just finished and the problem signature was
Problem event name: startuprepairoffline
Problem signature 01: 6.1.7600.16385
Problem signature 02: 6.1.7600.16385
Problem signature 03: unknown
[Code]....
View 1 Replies
View Related
Feb 23, 2012
i have a problem with its starting,it has been installed properly and works perfect when there is windows cd in its cd rom,otherwise it does not start and says operating system not found.
View 3 Replies
View Related
Feb 26, 2012
I have a laptop and I cannot get it to start. When I go into start-up mode (Esc key at start-up) I have two options:
Start-up Repair (Recommend)
Normal Start-up
When I do Normal Start-up, it lockes up on the Windows Screen. When I do Start-up Repair it locks up on a black screen.I don't have the back-up discs that were created for this specific computer at the moment (they are at another location at the moment). However I do have Windows 7 upgrade discs here from another computer.
View 2 Replies
View Related
Aug 4, 2011
It started with me interrupting a startup forcefully (which I now regret badly), then "i restarted it, but it gave me the information;"Windows failed to start. A recent hardware or software change might be the cause". I was given the option to either 'Launch startup repair' or 'Start windows normally'...If I select 'Launch startup repair', it leads me to a blank screen with a cursor then stays there until forever, if i select 'Start windows normally', it leads me to the Microsoft logo/'Starting windows' and just stays there for a while until it restarts." However, after the microsoft logo, I can see the screen changing for a split second, I can't see what it shows clearly a blue screen?
View 5 Replies
View Related
