7 Years ago I built an inexpensive AMD Socket 939 system with 1 Gigabyte of memory for my sister-in-law. It had an old version of Windows. Everything was fine until a few days ago. My sister-in-law's son decided to install Windows 7 Home Edition 64 bit. hat's when the trouble started. Widows starts to load and then stops when the logo appears. No BSOD and no error messages. It just stops loading. Initial boot up is fine and I can access the System BIOS. The settings are good. I went to the official Microsoft Windows web site and checked memory requirements for Windows 7. According to the web site 1 Gigabyte of RAM is suficient for 32-bit and 2 Gigabytes of RAM is sufficient for 64-bit: [URL] quirements Is 2GB really sufficient for 64 bit or should I bump it up to 4GB?
So I am planning to upgrade into Windows 7 Ultimate 64bit. I just wanna know what are the system requirements for it? at the moment I have Windows 7 32bit Home Premium, 2GB RAM, and Pentium (R) Dual-Core CPU 2.60 GHz (going to upgrade the CPU soon.)
I am UNABLE to connect to my home wi-fi after a brief power interruption... it get the following message "The settings on this computer do not match the requirements for this network." and the 'connect' button is grayed out!!! my wired internet works just fine after the power flash. but my wireless seems to NOT want to allow me to connect!
i recently formatted my Samsung n102 netbook. i forgot to take backup before formatting . i lost all the drivers installed and data's i saved. i just need to get the default drivers and programs which is already installed while i purchase, is there any option to get the default things....
im looking into a tablet with a ssd and the option of xp home(but id upgrade to tablet edition) or windows 7. the ssd that is included is either a 16gb or a 32gb. my question is how much actual space is really needed to install these OS'. i know w7 needs 15gb for 32bit but does it really need all 15gb? because then a 16gb would only fit the OS and nothing else.
i have installed win7 on my mgs one notebook and the vga and the network drivers are not installed. i have downloaded them and when i tried to install them, it saying that '' this computer does not meet the minimum requirements for installing the software''. i have try my best but nothing happen. The thing is that the machine was running win7 before and it gave some error when i have compressed the system disk c. i have also the drivers cd for the machine the one that was with the machine when i bought it.
When I try to install my computer drivers it shows This computer does not meet the minimum requirements for installing the software message.My motherboard model is ASUS-P5KPL-AM.
third monitor displayed, graphic card only supports two monitors, however I need to get a third up and running. RE14842 is the driver and I get this error, coworker has the exact same drivers and hardware, only thing that is different is I had mine imaged from previous OS, coworker did not.
I installed Intel Management Engine Driver, Intel Chipset Driver, Intel USB3.0 Driver, Realtek High Definition Audio Driver but i couldn't install many other drivers like Intel Rapid Storage Technology Driver, Intel Rapid Storage Technology Driver for 7x series, Intel Smart Connect Technology Driver it says "Platform Check Failed: Unsupported Hardware" or "This computer does not meet the minimum requirements for installing the software."
my usb port is not working and one said that install the intel chipset software but while installing i am getting system does not meet minimum requirements
Whenever I try to install the video driver for the dell latitude e6400 off their site, i get "This computer does not meet the minimum requirements for installing the software." I have just reinstalled windows, this laptop is 4-5 years old and still works though.
To start, I have Windows 7, on Sony Vaio laptop. I have been working on the issues with the malware removal team, but now machine looks clean, I am still having issues. When starting the computer and going to the task manager, I can watch explorer.exe start at about 18K memory usage and then grow constantly until it is running with almost all of the computer's physical memory after about seven min. I cannot get the context menu to show up after a few min by right clicking on anything. I had been experiencing "freezing" while playing Eden Eternal (an online role playing game) before that, which made me consider malware and seek help here at BleepingComputer. The freezing has ended, last time I played on that machine at least, but now there seems to be some issue with the explorer.exe taking all of the memory. I haven't been using the machine since I don't trust that there's not something running in the background that shouldn't be. In resource monitor there were "connections" that had "-" for both the name and the PID, but I don't know if that was the malware of if that's normal somehow? Issue with explorer.exe seems to be limited to only one user account, and not the other one. That is to say that if I log on one of the other accounts explorer.exe behaves normally, as far as memory usage.
how to convert a shared video memory into dedicated video memory and system video memory? me and my friend have the same specs computers but the same game runs slow in my computer but it runs smoothly in his computer?
i am having a problem with my memory getting tied up / used up and not being able to access it again until i reboot.
machine: dell xps studio 8100 os: win 7, processor: i7 2.8 ram: 16gb (max it will take) video: ati radeon 5700 (running 3 monitors)
versions: as far as i know i am running current versions of everything, including video drivers, flash, chrome, etc. (i've tried running chrome with both the build in version of flash and the system version -haven't seen a difference)
browser: i nearly exclusively run chrome / canary with auto-updates so am at the latest builds.what seems to cause me to use up / run out of memory is after i play videos (Internet, netflix, etc.), the memory seems to get used, but is not returned to the system, even if the browser is closed and re-opened.right now for example things are working fine; i rebooted my system a couple hours ago (but have not played any videos). i have adobe lightroom running, picasa, chrome and canary (currently 4 web browser windows open with 52 tabs open). task manager currently shows me using 8.20gb of ram, that seems pretty reasonable to me.
normally my system will keep running properly (if a program is closed, memory is freed up) right up until i start to play any videos (Internet, netflix, etc.) then it will start using up more memory. (of course i expect it to use more memory during playback) however, even if i restart the browser, the memory does not get freed back up. for example, just prior to the reboot, with everything closed, i was using right around 8gb of ram. once i rebooted, i was using 1.something gb of ram prior to opening any programs.however, once i start playing some videos, i never seem to be able to get my ram freed back up again unless i reboot the whole system. this is not just a problem with how much memory the system shows as being available, i frequently actually run out of memory. (task manager will show me as using around 15gb and then everything starts swapping out like crazy).
I find that if I run chkdsk and watch the memory usage in task manager it jumps by about 50MB every 2 seconds or so until it either finishes or hits around 3.2GB at which point my physical memory shows 99% used (I'm running 4GB), and the system of course slows to a crawl.f you just run a quick chkdsk on your boot drive you may not notice it, but try running something longer like chkdsk /r on a flash drive or chkdsk /f on a bigger internal drive (but not your OS drive as this would require a reboot) and watch the memory usage climb. I have duplicated this on both systems I have running Windows 7. My XP machine (checking the same USB flash drive) uses a much more normal amount of memory for chkdsk (20 - 30 MB).
Memory Usage Goes Up Gradually (Memory Leak)When I starting the Windows (in the first few hours) everything is normal But after 1 day or 2 (sooner or later) the amount of available memory gradually goes down and the physical memory usage increasing. This increasing, continues until the memory usage reaches near the 88% and at that point , there isn't any memory available to operate any software . Also when memory reaches that point, I can't access any drive in the HDD; because everytime I want to open any folder, the following error appears :c: is not accessible.Insufficient system resources exist to complete the requested service At this point, I even can't shutdown or restart Windows normally; I must restart windows manually by pressing the restart button.after restart, everything goes to normal again; but this problem appears again and again ...
my system : ------------------------ OS : Windows 7 x86 Cpu : Intel P4 3.0GH Vga : nVidia 6600 MB : Gigabyte GA-8I915G Duo PSU : Corsair 750W RAM : 2GB DDR-400 Transcend (I have these memories for 2 years) Physical Memory: 2000 mb Paging File: 2000 mb Virtual Memory: 6000 mb
0- using some optimizing and freeing softwares like (Memory Booster Gold - RAM Saver Pro - CleanMem)
1- Scanning my computer with antivirus and antispywares
2- Changing antivirus software
3- Updating windows with all updates available via Windows Update
4- Updating drivers of all hardwares
5- Downloading and installing the following hotfixes that are related to memory leak : The memory of the nonpaged pool may leak when you enable IPsec on a computer that is running Windows Server 2008 R2 or Windows 7 A memory leak issue occurs in the Windows Management Instrumentation service on a computer that is running Windows Server 2008 R2 or Windows 7 FIX: A memory leak may occur when you use the Microsoft ActiveX Data Objects Library in Windows Vista, in Windows 7, in Windows Server 2008, or in Windows Server 2008 R2 A memory leak occurs when an ADO Recordset object calls the UpdateBatch method A nonpaged pool memory leak occurs when you use a WFP callout driver in Windows Vista, Windows 7, Windows Server 2008, or in Windows Server 2008 R2
I just built a new computer and started with 8GB of memory. A few weeks down the line I purchased another set of the same memory because it was on such a good deal and had great reviews (newegg). It also was working well for me, so I figured maybe more could be better.
I haven't noticed any decrease/increase in system performance except Alt-Tabbing has recently got slower. Also, Windows 7 was sitting tight on 1.3gb to 2gb of memory usage prior to the extra 8 (now 16) being added. Even when gaming, it went up to like 3gb. Now that I've added the extra it's going up to 4.5gb or better. Also, is it possible to speed up my alt-tabbing? It seems to have a good 3-4 second pause in it instead of being immediate like it was.
Computer specs: Windows 7 HP 64-bit gSkill 16gb 1866 memory (BIOS shows it at 1866, too) Intel i5-2500k Sandy Bridge (OC'd 4.6 with factory Overclock presets) ASRock z68 Extreme4 mobo
My VGA not support "Hardware T&L "requirements. I want play "Resident Evil 4" this games shows it wants "Hardware T&L " VGA requirements, so that mean i can't ply this game?
I recently bought 2x1GB Ram Sticks for a Dell DimensionE510It has a Pentium4 2.80Gh Processorand factory 1 GB RAMIt's currently running Windows 7 x64hen I put the new RAM sticks in the system recognizes the new memory says it has 3.0 GB of ram and runs until I start actually using to new memory, as in start running more programs simultaneously and it crashes and I get two BSOD*. As far as I know the sticks match the motherboard, as in that's what I was told.*"Memory Management" and "PFN List Corrupt"As far as I understand it is a driver issue, but I honestly am not sure.
